How to avoid a report to execute without taking an action on the prompt

I have created a dashboard which has a prompt. I would like to have the report run only when the user clicks on "OK". Right now when the dashboard is accessed it already runs the report with the default value on the prompt.
Here is the error message I get
"No Results
The specified criteria didn't result in any data. This is often caused by applying filters that are too restrictive or that contain incorrect values. Please check your Request Filters and try again. The filters currently being applied are shown below."
Thanks!

The report will always run, so create a default prompt which always gives 'No results'. Next change the text in the 'no result'view to: "Please make an appropriate selection and press GO"
regards
John
http://obiee101.blogspot.com/

Similar Messages

In chrome I'm getting green double underline hyperlinks to ads. How can I get rid of this without adding more junk to the computer?

I have both safari and chrome, because I'm used to chrome. The only extension I have is Google docs. I started getting green double underline hyperlinks to ads. How can I get rid of this without adding more junk to the computer? People suggest programs to do it, but how do I know they won't make it worse?
Is someone from Apple here and can answer?
Thanks!

You may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

End action will not execute because of end action on the final chapter point

I will be referring to this video:
http://tv.adobe.com/watch/learn-encore-cs4/creating-an-event-dvd/
I followed this exactly, except for the slide show (and I made a DVD instead of flash), but when I checked the project, I get the error message "End action will not execute because of end action on the final chapter point".
I don't understand. I did not change any end points except for the one specified in this tutorial. (About the Max footage for the very beginning, before the menu). If anything was added, it was Adobe's doing.
I do notice that in 00:04 in the tutorial, there's a downward arrow on the very end of the timeline. My timeline does not have this. How was this done?
In the Encore software, after the timeline is loaded, there is no arrow at the very end. Mine doesn't have that either.
I'm finding Adobe/Encore's way of making menus rather difficult. With Pinnacle Studios (at least through 8-12), making menus was easy, and it set up the chapters for you. Why can't there be an automated menu feature in Encore?
Anyway, here's my project:
Main time line has 9 chapters. When clicking on their chapter points, all say End Action: not set.
When I click on the white bar above the lite purple footage of the time line, where the chapter point's bottom rest, it says, End Action: Not Set AND Menu Remote: Return to Last Menu.
All 9 chapter points are white.
In the flowcart, there is the DVD icon --> my few seconds opening credits --> menu that has a Play All and Scene Selection button
Play All goes to first chapter of video
Scene Selection (submenu #1) goes to 6 scenes, a next, previous, main menu. All seem to be linked properly.
Scene Selection for scenes 7-9 are in the #2 submenu. Has a previous button and a main menu button. All seem to be linked properly.
Can anyone offer any advice? Help? I need to make this DVD and two others by the end of the week!
If you need more information, please let me know that too.

If I make a change in the timeline in Premiere, will that new change be reflected in the timeline of Encore?
If you used Adobe Dynamic Link, then yes, the Timeline will be updated. If you did not, then you will need to Export again, then Import into Encore. Watch out if you have already Transcoded, etc., and I'd name the new Timeline Export differently, Import that, use Replace Asset. When a Project is very new, and nothing much has been done, it will not be so picky. After a couple of links, etc., it gets VERY picky, and Replace Asset will help.
Is there a way to reload the project without having to redo all the menus and links?
If you did a Save_As, or still have your original Project, i.e. you started a completely new Project with a unique name, you can go back to the original.
Hope that helps,
Hunt

Adobe Encore CS4: End action will not execute because of end action on the final chapter point

Error screen:
Error I’m getting for section titled Notes (PP 45 second video): “End action will not execute because of end action on the final chapter point.”
The icon that shows error is in top line second from end. I’m trying to 'end action' that portion of the video by going back to 'menu default'; also tried end action w/ ‘Stop’ and neither work.
I saw a post about checking timeline. Not sure what I’m looking for there. I have nothing in Orphanage area. I also tried building despite Check Project error and it will not build project. Any suggestions on how to fix: “End action will not execute because of end action on the final chapter point.”?

Select chapter one on that timelne. Look in the properties panel. Does it have an end action? You do not want an end action on the chapter; just on the timeline itself.
That will not generally prevent a build, however. So you may have other issues.

To Complete the task without taking complete action in BPM worklist.

In my project ,there is one requirement that to complete the task without taking complete action in BPM worklist.
So I am trying to acheive this using JAva API of BPM worklist.
For that I have followed the approach given in below link
http://technology.amis.nl/2007/02/invoking-bpel-worklist-api-from-remote-server-with-java/
Created java application and imported all the required libraries and jars.
while running this application it is giving following error
NoClassDefFoundError: oracle/j2ee/ws/common/jaxws/ServiceDelegateImpl
This is due to absence of 'ServiceDelegateImpl.class' which should be present in webclient.jar ,
I have also added the same jar from jdeveloper\webservices\lib folder.
but the thing is ServiceDelegateImpl class is missing in webclient.jar.
I have downloaded the same jar from internet and tried various versions also.
still the problem persists.
Which jar should I add ? or any other configutation is required ?
Am I following correct approach?
Any suggestions on other approach would be appreciated.
Thanks in advance.

Hi Marc,
You can set the task Process Owner (i.e. TaskProcessOwner) to the group which Bowman and
Laura belong to from SharePoint Designer, then they should be able to complete the re-assigned task.
http://www.fourbuckeyes.com/2013/06/07/task-delegation-in-sharepoint-2010-approval-workflows/
http://community.rightpoint.com/blogs/viewpoint/archive/2012/04/17/sharepoint-designer-2010-workflow-advanced-properties.aspx
Thanks
Daniel Yang
TechNet Community Support

I need to see how many times a report is executed in the system.

Hi,
I need to know how many times a report and background job is executed in the system.
How can I know that?
Thanks for the help!

hi
For all reports and transactions execution info is stored in table MONI.
Read the System log using the Transaction SM21. may be you can find some info here.
U can use trx STAT, here the system stores the statistic only for a certain period (lst week, last month,...).
Also try stad transaction.
Reward points if helpful.
Regards
Nilesh

How to create a text variable for Calender Yr/Month depending on the prompt for calendar year

Hi everyone
Please assist on this issue:
i have created a Bex report that has an offset for 12 months from the current calender month, i tried to use text variables to replace the calender months but i just learned now text variables from Bex dont work in BO, so I would like to create a prompt in BO to enter Calendar Year and then based on the input(Calender Year) the Webi report must display a 12 months for that Year.
Please also indicate where exactly i have to click in order to get that "Helpful icon " when the my issues have been resolved, because i searched it and havent seen it anywhere on the communications
Thanks in Advance
Ole

Hi Gill
In BO I recieve my all months for existing data and when i create a prompt for Calender Year the months in the report still has those text varibale for exampl if i enter 2011 on the prompt the text remains for the year that was already there wen i created my text variable... so its not dynamic.....
So if i have text variables in Bex it will display like this in Webi in which it wont change if i put in 2011 as input for the prompt...

How do I produce a duplicate page, without having spare pages at the end?

I am a basic user, who is currently trialing the adobe acrobat and Livecycle Design programs...
I am practising the preparation of a report which could have an individuals personal details in "page 1" and the report in pages 2-8 for example...
If I wanted to include, lets say, 5 individuals on the same report, is there a way in which I can have a drop down box, which could ask "how many individuals are in this report" and I could select "5" from a drop down box, causing adobe to add additional pages and duplicate page 1 five times.
Or, at the end of page 1, could I have a tick box or any other type of button which could state "If you have another individual, please "tick box/add/etc". Also adding a new page with the blank page 1 format.
At the moment, I have added blank copies of page 1 at the end of the report. The option described would stop me having to print every report I completed with several blank copies of "page 1" when they may not be required.
It also prevents me from completing the report then printing it, reseting the form and printing page 1 for each individual (5 times in my example)
Hope that made sense...
The end user will be using Adobe Reader Only.

>I am a basic user, who is currently trialing the adobe acrobat and Livecycle Design programs...
I recommend you post questions about Acrobat in the Acrobat Windows or
Acrobat Macintosh forum, or specific LiveCycle Designer questions in
the LiveCycle Designer forum.
Create PDF Online is a subscription service on Adobe's web site which
only makes PDF files, nothing else, so it won't help you.
Good luck,
Aandi Inston

TS3276 how do I send photos in email without them being embedded in the email (and therefore un-downloadable)?

How can I send photos in an email without them being embedded (and therefore un-downloadable)?

They are still attachments, even though you see the embedded version (which can be turned off by rightclicking the embedded attachment and choosing 'View as Icon')

How to send a report for particular job chain every hour regarding the job

Hi Gerben/Anton
We are running one jobchain for all billing jobs . Is any chance is there to send a report automatically to certain pupils for every one hour regarding the job status(excel format ) .
Coudl you please help on this it should be good if i get any reply on this .
Thanks
Ramkumar

Hi Ram,
I need your help on getting mail alert with log file.
here is how i have provide the parameter valure for job definition: system_mail_sent.
Step1 with one job1 and step2 with one job1
In step2 , i have included the job definition to send mail. with below parameter.
Relative Job: Step 1, Job 1
Job File: step 1, job 1: step 1/log.txt
Please let me know if the above method is correct or not.
NOTE: mail server and from address are configured.
Thanks,
Karthik

After enlarging a photo in edit by either finger or zoom which puts me in "navigator" how do I save my final product without it reverting back to the original?

How do I save an enlargement - not a crop - made in iPhoto?

Have you tried to import the videos to iTunes and sync them directly from iTunes?
See: iTunes: Frequently asked questions about viewing and syncing videos - Apple Support
If that does not work, try to add the videos to a shared photo stream, if your iPhone and iOS support shared albums:
See: iCloud Photo Sharing FAQ - Apple Support

How do I set a wallpaper photo without it zooming in all the way and and not letting me zoom out?

When I try to change my wallpaper using my own photos on both my iPad and iPhone with ios7, it will not allow me to move and scale. When I do it, it automatically zooms back in on the photo.

I have the same problem on my iPad, but I figured out the fix on my iPhone. Go to settings, general, then accessibility, and turn on the thing that says reduce motion. Sometimes that still doesn't work so you have to screenshot the picture then use the screenshot, I don't know why. But for the iPad, I did the same thing and it didn't work. I have googled it many times and I'm shocked that Apple hasn't done anything about it yet. Hope that helped!

How do I send an attachment (photo) without it inserting itself into the body of the email?

Under attach, I selected file and then selected a photo. It appeared as an attachment outgoing, however, it was received inserted in the body of the email. Thank you in advance.

I think this depends on the recipient's mail client. Thunderbird, for instance, when used to view a received message with a picture attachment, will display the picture appended to the message. To a casual glance it would appear to be embedded into the message.
Send your messages using plain text (not HTML) and images ''cannot'' be embedded. If they appear to be embedded then it's the recipient's mail client to blame and therefore beyond your control.
You could zip your pictures to force them to be processed as attachments at the receiving end. ;-)

How do I revert my display settings without being able to see the screen?

I am using an Emerson led tv as a monitor, and when I tried to adjust the display settings to get a better resolution,I chose a resolution that wasn't supported. Now it is telling me to change the settings, but I can't see the screen anymore.

Reset the PRAM, as per > About NVRAM and PRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.

Ipad Air restore off Icloud backup. How do I know if my apps are taking too long in the "waitting" part of the reboot?

For some reason my Ipad Air decided it wanted to create used space on it's hard-drive today. It suddenly went from using 7GB to 11.5 GB. I couldn't find the solution so I decided to restore my Ipad from a backup last Thursday. Now all my apps appear but it is taking forever to download them, it wont change from waiting to downloading?
Suggestions?
My main question is, how long does it take in each process till backup is 100% Complete its downloading around 7GB of storage, when will my apps stop "waiting"

Your camera roll photos - those that you take with the iPad or save from emails and websites - are in your backup.
If you use iCloud for backups, restore from your iCloud backup after you restore the iPad. If you restore with iTunes, restore from that backup after you restore the iPad. You can read more here.
How to backup and restore from a backup
http://support.apple.com/kb/HT1766
But the bottom line is that if you have never backed up, there is no way to save the photos now.

How to avoid a report to execute without taking an action on the prompt

Similar Messages

Maybe you are looking for