How to avoid Dual Active VSS switches in the network...

Hi Team,
We have 2 nos of VSS switches in the network those are connected with 2 nos 10 Gbps uplink, all access switches are connected to both VSS chassis with dual uplinks, When we removed VSL link between these two vss switches both became active. We have completely Layer-2 network, is that any feature which we can use and avoid dual active scenario in VSS and make any one of the switch in standby mode and all Layer link on that switch will be available in case of VSL link goes down.
I have 3750X series switches are connected to both VSS Core switch It's world be much appreciated if some one provide well document on this and their suggestion.
Your reply will be much appreciated.
Thanks,
Vishal

Thanks for the reply Reza,
Please let me know if we go with Epagp then when VSL link goes down then what would be the result?
1st My there won't be any effect in the network, standby chassis remain in Standby Mode and active in Active Mode?
2nd Active chassis will reboot and became standby and my standby chassis will be Active?
3rd Standby chassis will be shutdown all port except VSL? and only Active chassis will work?
4th Active chassis will restart and shutdown all port except VSL? and standby chassis will be active?
5th ???
Reza it would be much helpful if you please guide how to configured EPagp on 6500 and 3750X switch with "c3750e-universalk9-mz.122-55.SE8.bin (ipservices)" image.
Thanks,
Vishal

Similar Messages

How to prevent re-login when switching in the application between different module in 6.1.1.1.11?

How to prevent re-login when switching in the application between different module in 6.1.1.1.11?
Please help me to figure out this or resolve this issue?

Be sure to check that your Remoting Container service is running. If it is not, restart the service, and if it goes down again, check the event logs.
Make sure that the AuthenticationBridgeService is enabled in your EnvironmentSettings.config, and the remoting container user is configured using the SetupAssistant.
<RemotingContainer>
         <ConfigInfo configChildKey="key">
               <add key="UserID" value="@@VAR:Prodika.RemotingContainer.SysUser@@" />
         </ConfigInfo>
        
         <RemoteServices configChildKey="name">
             <Service
                 name="AuthenticationBridgeService"
                 port="@@VAR:Prodika.AuthenticationBridge.Port@@"
                 isActive="true" />
If the Remoting Container Service fails, please contact Support with details from the event logs.

HT201210 Hi, I went to update my iphone using my itunes site, halfway through i got a message saying reset, make sure that your network is active and try again, the network connection is fine. it will not allow me acces to my phone unless a recovery is do

Hi, I went to update my iphone using my itunes site, halfway through i got a message saying reset, make sure that your network is active and try again, the network connection is fine. it will not allow me acces to my phone unless a recovery is done. I have not done any back ups and obviously dont want to lose any information. Please can anyone help
Thanks
Roger

Hi, I went to update my iphone using my itunes site, halfway through i got a message saying reset, make sure that your network is active and try again, the network connection is fine. it will not allow me acces to my phone unless a recovery is done. I have not done any back ups and obviously dont want to lose any information. Please can anyone help
Thanks
Roger
[email protected]

How many second can Oracle TNS endure on the network unstability?

Hi there,
Recently the network at our office is very unstable. So the problem between WAS server(WAS1, WAS2) and Oracle DB server(DB).
Sometimes the connection from WAS server to DB server is broken suddenly. In other case the connection is still alive after network unstability.
Is there any TIMEOUT to achieve the disconnection? How many second can Oracle TNS endure on the network unstability?
Best regards,

Hi,
Try setting SQLNET.OUTBOUND_CONNECT_TIMEOUT in your SQLNET.ORA file to a higher value.
http://docs.oracle.com/cd/B28359_01/network.111/b28317/sqlnet.htm#BIIFGFHI
Salman

How to avoid slide rebuild when switching back to Keynote?

We're doing a presentation in which we occasionally Cmd-Tab switch from Keynote to Safari to demonstrate the features of a Web application. Many of our slides use the nice Keynote builds.
When switching back to Keynote, though, the slide being displayed rebuilds instead of simply appearing as it was when switched away. So if we show a slide that fades in three bullet points over 10 seconds, switch to Safari to show the feature we talked about, and then switch back to go on to the next slide, we have to wait for the entire 10-second build again.
We've tried using Spaces instead of Cmd-Tab to switch to Safari, but Keynote seems to grab on to all of the hotkeys. Ctrl-Option-Arrows and Ctrl-Option-Numbers during Keynote playback don't switch spaces, but change slides instead.
One clunky solution we're considering is adding a static (non-built) copy of each slide where we switch to the demo -- that is, we present over the build, then proceed to the copy before switching away. This might work, but if questions come up and we need to switch to Safari during any other slide with a build, we're still coming back to a repeated build.
Is there an option we've missed that prevents re-building the slide when Keynote "gets focus" again?
Thanks in advance for any help anyone can offer!

I don't think you can go back to the end of a slide with builds - after the builds have finished. So your "clunky" solution, = some kind of similar workaround, may be your only option. I've just worked out another one which might work visually for you, but also "clunky".
The idea is to always go from your slide, wherever you happen to be in your presentation, first to a static slide which looks like a Safari window (made from a screen shot), and from there to real Safari. You can do this easily by adding a hyperlink on all your slides to that one (if you want it on all your slides, put it on the master). When you're done with real Safari you'll come back to the same faux-Safari slide. That's the easy part.
Now, you want to get back to the right place in your presentation. This is more complicated, depending on how many slides you have in all, or at least, slides from which you may want to go demonstrate Safari again. Put hyperlinks on your faux-Safari slide, each one leading to the slide you want to continue from, or even a link to each and every one of your slides. Obviously, this might be unworkable with a huge presentation, but, with a little graphic fiddling, and some presentation practice, it might work.

How to avoid spaces in csv file at the time of spooling

Hi all,
I am spooling 30 query results into one CSV file ,I am getting two empty rows for each query.
Can any one suggest me how to avoid these spaces.
Thanks & Regards,
P Prakash
this is the script i am using to generate csv file .
SET linesize 12000
SET pagesize 10000
SET pause off
SET termout off
SET feed off
SET head off
SPOOL c:\tes111.csv replace
SELECT 'ISA01,ISA02,ISA03,ISA04,ISA05,ISA06,ISA07,ISA08,ISA09,ISA11,ISA12,ISA13,ISA14,ISA15,ISA16,GS01,GS02,GS03,GS04,GS05,GS06,GS07,GS08,ST01,ST02,ST03,BHT01,BHT02,BHT03,BHT04,BHT06,trnsctn_segment_count,included_trnsctn_sets_count,included_fnctnl_groups_count,input_acknwldgmnt_sid'
FROM DUAL;
SELECT ptr.athrztn_infrmtn_qlfr
|| ','
|| ptr.athrztn_infrmtn
|| ','
|| ptr.scrty_infrmtn_qlfr
|| ','
|| ptr.scrty_infrmtn
|| ','
|| ptr.intrchng_sndr_idntfr_qlfr
|| ','
|| ptr.intrchng_sndr_idntfr
|| ','
|| ptr.intrchng_rcvr_idntfr_qlfr
|| ','
|| ptr.intrchng_rcvr_idntfr
|| ','
|| ptr.intrchng_date
|| ','
|| ptr.intrchng_cntrl_stndrds_idntfr
|| ','
|| ptr.intrchng_cntrl_vrsn_nmbr
|| ','
|| ptr.intrchng_cntrl_nmbr
|| ','
|| ptr.acknwldgmnt_rqstd_indctr
|| ','
|| ptr.usg_indctr
|| ','
|| ptr.cmpnt_elmnt_sprtr
|| ','
|| ptr.fnctnl_idntfr_code
|| ','
|| ptr.aplctn_sndr_code
|| ','
|| ptr.applctn_rcvr_code
|| ','
|| ptr.fnctnl_grp_crtn_date
|| ','
|| ptr.fnctnl_grp_crtn_date
|| ','
|| ptr.grp_cntrl_nmbr
|| ','
|| ptr.rspnsbl_agncy_code
|| ','
|| ptr.vrsn_rls_indstry_idntfr_code
|| ','
|| ptr.trnsctn_set_idntfr_code
|| ','
|| ptr.trnsctn_set_cntrl_nmbr
|| ','
|| ptr.implementation_guide_vrsn_name
|| ','
|| ptr.hierarchical_structure_code
|| ','
|| ptr.trnsctn_set_purpose_lkpcd
|| ','
|| ptr.sbmtr_trnsctn_idntfr
|| ','
|| ptr.trnsctn_set_creation_date
|| ','
|| ptr.trnsctn_type_code
|| ','
|| ptr.trnsctn_segment_count
|| ','
|| ptr.included_trnsctn_sets_count
|| ','
|| ptr.included_fnctnl_groups_count
|| ','
|| ia.input_acknwldgmnt_sid
|| ','
FROM pa_transaction_request ptr, input_acknwldgmnt ia, input_batch_file ibf
WHERE ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat';
SELECT 'pa_rqst_sid,NM01,NM02,NM108,NM109'
FROM DUAL;
SELECT pr.pa_rqst_sid
|| ','
|| pr.entity_idntfr_lkpcd
|| ','
|| pr.entity_type_qlfr
|| ','
|| pr.payer_idntfctn_code_qlfr
|| ','
|| pr.payer_idntfctn_code
|| ','
FROM pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf
WHERE pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat';
SELECT 'meta_data_cid,data_value,iteration_number,Created_by,modified_by'
FROM DUAL;
SELECT prs.meta_data_cid
|| ','
|| prs.data_value
|| ','
|| prs.iteration_number
|| ','
|| prs.created_by
|| ','
|| prs.modified_by
|| ','
FROM pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf,
pa_request_situational prs
WHERE pr.pa_rqst_sid = prs.pa_rqst_sid
AND prs.stnl_target_table_cid = 100
AND prs.target_table_sid = pr.pa_rqst_sid
AND pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat';
SELECT 'NM101 ,NM103,NM104,NM105,NM108,NM109,PER02,PER04,PER05,PER06,PER07 ,PER08'
FROM DUAL;
SELECT pr.pa_rqst_sid
|| ','
|| prpl.pa_rqst_x_prvdr_lctn_sid
|| ','
|| prpl.rqstr_entity_idntfr_lkpcd
|| ','
|| prpl.last_name
|| ','
|| prpl.first_name
|| ','
|| prpl.middle_name
|| ','
|| prpl.idntfr_type_cid
|| ','
|| prpl.prvdr_lctn_iid
|| ','
|| prpl.rqstr_contact_name
|| ','
|| prpl.cmnctn_nmbr_1
|| ','
|| prpl.cmnctn_nmbr_2
|| ','
|| prpl.cmnctn_nmbr_type_lkpcd_1
|| ','
|| prpl.cmnctn_nmbr_type_lkpcd_2
|| ','
|| prpl.cmnctn_nmbr_type_lkpcd_3
FROM pa_request_x_provider_location prpl,
pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf
WHERE prpl.pa_rqst_sid = pr.pa_rqst_sid
AND pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat'
AND prpl.pa_prvdr_type_lkpcd = 'RR';
SELECT 'meta_data_cid,data_value,iteration_number,Created_by,modified_by'
FROM DUAL;
SELECT prs.meta_data_cid
|| ','
|| prs.data_value
|| ','
|| prs.iteration_number
|| ','
|| prs.created_by
|| ','
|| prs.modified_by
|| ','
FROM pa_request_x_provider_location prpl,
pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf,
pa_request_situational prs
WHERE prpl.pa_rqst_sid = prs.pa_rqst_sid
AND prs.stnl_target_table_cid = 102
AND prs.target_table_sid = prpl.pa_rqst_x_prvdr_lctn_sid
AND prpl.pa_rqst_sid = pr.pa_rqst_sid
AND pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat'
AND prpl.pa_prvdr_type_lkpcd = 'RR';
-- 4. Subscriber
NM103 Name Last or Organization Name
NM104 Name First
NM108 Identification Code Qualifier
NM109 Identification Code
DMG02 Date Time Period birth date
DMG03 Gender Code
SELECT ' NM103,NM104,NM108,NM109,DMG02,DMG03'
FROM DUAL;
SELECT prxm.last_name
|| ','
|| prxm.first_name
|| ','
|| prxm.idntfr_type_cid
|| ','
|| prxm.mbr_idntfr
|| ','
|| prxm.birth_date
|| ','
|| prxm.gender_lkpcd
|| ','
FROM pa_request_x_member prxm,
pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf
WHERE prxm.pa_rqst_sid = pr.pa_rqst_sid
AND pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat';
-- 5. Subscriber Situational Info
NM102 Entity Type Qualifier
NM105 Name Middle
NM107 Name Suffix
REF01 Reference Identification Qualifier
REF02 Reference Identification
N301 Address Information
N302 Address Information
N401 City Name
N402 State or Province Code
N403 Postal Code
N407 Country Subdivision Code
SELECT 'meta_data_cid,data_value,iteration_number,Created_by,modified_by'
FROM DUAL;
SELECT prs.meta_data_cid
|| ','
|| prs.data_value
|| ','
|| prs.iteration_number
|| ','
|| prs.created_by
|| ','
|| prs.modified_by
|| ','
FROM pa_request_x_member prxm,
pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf,
pa_request_situational prs
WHERE prxm.pa_rqst_sid = pr.pa_rqst_sid
AND pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND prs.stnl_target_table_cid = 101
AND prs.target_table_sid = prxm.pa_rqst_x_mbr_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat';
-- 6. Patient Event Level
TRN02 Reference Identification
TRN03 Originating Company Identifier
TRN04 Reference Identification
UM01 Request Category Code
UM02 Certification Type Code
UM03 Service Type Code
UM04-1 Facility Code Value
UM04-2 Facility Code Qualifier
UM06 Level of Service Code
UM07 Current Health Condition Code
UM08 Prognosis Code
UM09 Release of Information Code
UM10 Delay Reason Code
SELECT 'TRN02,TRN03,TRN04,UMO1,UMO2,UM04_1,UM04_2,UM06,UM07,UM08,UM09,UM10,'
FROM DUAL;
SELECT prd.patient_event_tracking_number
|| ','
|| prd.orginating_company_identifier
|| ','
|| prd.trace_assigning_entity_idntfr
|| ','
|| prs.rqst_ctgry_lkpcd
|| ','
|| prs.rqst_crtfctn_type_lkpcd
|| ','
|| prs.x12_pa_srvc_type_code
|| ','
|| prs.facility_type_code
|| ','
|| prs.unfrm_blng_facility_type_code
|| ','
|| prs.srvc_rqd_lkpcd
|| ','
|| prs.current_health_cndtn_lkpcd
|| ','
|| prs.prognosis_lkpcd
|| ','
|| prs.rls_of_info_lkpcd
|| ','
|| prs.delay_reason_lkpcd
|| ','
FROM pa_request_service prs,
pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf,
pa_request_detail prd
WHERE prs.pa_rqst_sid = pr.pa_rqst_sid
AND pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND pr.pa_rqst_sid = prd.pa_rqst_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat';
--Patient Event Level situational information
SELECT 'meta_data_cid,data_value,iteration_number,Created_by,modified_by'
FROM DUAL;
SELECT prs.meta_data_cid
|| ','
|| prs.data_value
|| ','
|| prs.iteration_number
|| ','
|| prs.created_by
|| ','
|| prs.modified_by
|| ','
FROM pa_request_service prsv,
pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf,
pa_request_situational prs
WHERE prsv.pa_rqst_sid = pr.pa_rqst_sid
AND pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND prs.stnl_target_table_cid = 103
AND prs.target_table_sid = prsv.pa_rqst_srvc_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat';
---Diagnosis
HI01 Health Care Code Information
HI01-1 Code List Qualifier Code
HI01-2 Industry Code
HI01-3 Date Time Period Format Qualifier
HI01-4 Date Time Period
SELECT 'HI01_1,HI01_2,HI01_3'
FROM DUAL;
SELECT prd.pa_diagnosis_type_lkpcd
|| ','
|| prd.diagnosis_iid
|| ','
|| prd.from_date
|| ','
FROM pa_request_x_diagnosis prd,
pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf
WHERE prd.pa_rqst_sid = pr.pa_rqst_sid
AND pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat';
-- Request detail
TRN02 Reference Identification
TRN03 Originating Company Identifier
TRN04 Reference Identification
SELECT 'TRN02,TRN03,TRN04'
FROM DUAL;
SELECT prd.patient_event_tracking_number
|| ','
|| prd.orginating_company_identifier
|| ','
|| prd.trace_assigning_entity_idntfr
|| ','
FROM pa_request_detail prd,
pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf
WHERE prd.pa_rqst_sid = pr.pa_rqst_sid
AND pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat';
-- ambulance Transaportation
CR101 Unit or Basis for Measurement Code
CR102 Weight
CR103 Ambulance Transport Code
CR104 Ambulance Transport Reason Code
CR105 Unit or Basis for Measurement Code
CR106 Quantity
CR109 Description
CR110 Description
SELECT 'CR101,CR102,CR103,CR104,CR105,CR106,CR109,CR110'
FROM DUAL;
SELECT pat.weight_uom_code
|| ','
|| pat.patient_weight
|| ','
|| pat.amblnc_transport_type_lkpcd
|| ','
|| pat.amblnc_transport_rsn_lkpcd
|| ','
|| pat.distance_uom_code
|| ','
|| pat.trnsprtn_distance
|| ','
|| pat.round_trip_purpose_desc
|| ','
|| pat.stretcher_purpose_desc
|| ','
FROM pa_request_ambulance_transport pat,
pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf
WHERE pat.pa_rqst_sid = pr.pa_rqst_sid
AND pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat';
-- 2000F SV1
SV101-1 Product/Service ID Qualifier Change values
SV101-2 Product/Service ID Need to change label to Procedure Code.
SV101-3 Procedure Modifier No change required to PA screen
SV101-4 Procedure Modifier No change required to PA screen
SV101-5 Procedure Modifier No change required to PA screen
SV101-6 Procedure Modifier No change required to PA screen
SV101-7 Description No change required to PA screen. Will map to the Remarks field on the Screen
SV102 Monetary Amount
SV103 Unit or Basis for Measurement Code
SV104 Quantity
SV107 Composite Diagnosis Code Pointer
SV107-1 Diagnosis Code Pointer
SV107-2 Diagnosis Code Pointer
SV107-3 Diagnosis Code Pointer
SV107-4 Diagnosis Code Pointer
SV111 Yes/No Condition or Response Code
SV120 Level of Care Code
SELECT 'TRN_Reference_Identif,TRN_Originating_CMP_Identif,TRN_Reference_IdentiReference Identiff,Reference_Identif,Reference_Identification,Reference_Identif,Product/Service_ID_Qualifier,Product/Service_ID,Procedure_Modifier,Procedure_Modifier,Procedure_Modifier,Procedure_Modifier,Description'
FROM DUAL;
SELECT prp.srvc_trace_nmbr_1
|| ','
|| prp.trace_asgn_enty_adtnl_idntfr_1
|| ','
|| prp.trace_asgn_enty_adtnl_idntfr_1
|| ','
|| prp.trace_asgn_enty_adtnl_idntfr_2
|| ','
|| prp.prvs_rvw_athrztn_nmbr
|| ','
|| prp.prvs_administrative_rfrnc_nmbr
|| ','
|| prp.x12_code_list_qlfr_lkpcd
|| ','
|| prp.procedure_iid
|| ','
|| prp.mdfr_code
|| ','
|| prp.mdfr2_code
|| ','
|| prp.mdfr3_code
|| ','
|| prp.mdfr4_code
|| ','
|| prp.drug_desc
|| ','
FROM pa_request_procedure prp,
pa_request_service prs,
pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf
WHERE prp.pa_rqst_srvc_sid = prs.pa_rqst_srvc_sid
AND prs.pa_rqst_sid = pr.pa_rqst_sid
AND pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND ibf.original_file_name =
'HHIPAA.165760000.20110518I001.278_GC04-3.dat';
SV2 SV201 Product/Service ID
SV2 SV202 Composite Medical Procedure Identifier
SV2 SV202-1 Product/Service ID Qualifier
SV2 SV202-2 Product/Service ID
SV2 SV202-3 Procedure Modifier
SV2 202-4 Procedure Modifier
SV2 SV202-5 Procedure Modifier
SV2 SV202-6 Procedure Modifier
SV2 SV202-7 Description
SV2 SV202-8 Product/Service ID
SV2 SV203 Monetary Amount
SV2 SV204 Unit or Basis for Measurement Code
SV2 SV205 Quantity
SV2 SV206 Unit Rate
SV2 SV209 Nursing Home Residential Status Code
SELECT 'Product/Service ID,Product/Service ID Qual,Product/Service ID,Product Modifier,Product Modifier,Product Modifier,Product Modifier,Description,Unit Rate,'
FROM DUAL;
SELECT prp.revenue_iid ||','||
prp.x12_code_list_qlfr_lkpcd ||','||
prp.procedure_iid ||','||
prp.mdfr_code ||','||
prp.mdfr2_code ||','||
prp.mdfr3_code ||','||
prp.mdfr4_code ||','|| prp.drug_desc ||','||
prp.srvc_line_rate ||','
FROM pa_request_procedure prp,
pa_request_service prs,
pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf
WHERE prp.pa_rqst_srvc_sid = prs.pa_rqst_srvc_sid
AND prs.pa_rqst_sid = pr.pa_rqst_sid
AND pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat';
-- 2000F SV3
SV301 Composite Medical Procedure Identifier
SV301-1 Product/Service ID Qualifier
SV301-2 Product/Service ID
SV301-3 Procedure Modifier
SV301-4 Procedure Modifier
SV301-5 Procedure Modifier
SV301-6 Procedure Modifier
SV301-7 Description
SV301-8 Product/Service ID
SV302 Monetary Amount
SV304 Oral Cavity Designation
SV304-1 Oral Cavity Designation Code
SV304-2 Oral Cavity Designation Code
SV304-3 Oral Cavity Designation Code
SV304-4 Oral Cavity Designation Code
SV304-5 Oral Cavity Designation Code
SV305 Prosthesis, Crown or Inlay Code
SV306 Quantity
SV307 Description
select 'Product/Service ID Qual,Product/Service ID,Procedure Modifier,Procedure Modifier,Procedure Modifier,Procedure Modifier,Description,Oral Cavity Designation Code,Oral Cavity Designation Code,Oral Cavity Designation Code,Oral Cavity Designation Code,ProsthesisCrown Inlay Code,Description' from dual;
SELECT prp.x12_code_list_qlfr_lkpcd
|| ','
|| prp.procedure_iid
|| ','
|| prp.mdfr_code
|| ','
|| prp.mdfr2_code
|| ','
|| prp.mdfr3_code
|| ','
|| prp.mdfr4_code
|| ','
|| prp.drug_desc
|| ','
|| prp.oral_cavity_dsgntn2_cid
|| ','
|| prp.oral_cavity_dsgntn3_cid
|| ','
|| prp.oral_cavity_dsgntn4_cid
|| ','
|| prp.oral_cavity_dsgntn5_cid
|| ','
|| prp.prosthesis_crown_inlay_code
|| ','
|| prp.remark
|| ','
FROM pa_request_procedure prp,
pa_request_service prs,
pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf
WHERE prp.pa_rqst_srvc_sid = prs.pa_rqst_srvc_sid
AND prs.pa_rqst_sid = pr.pa_rqst_sid
AND pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat';
-- 2000F TOO pending Prakash to Write
--Tooth Information
SELECT 'Industry Code,Tooth Surface,TOO03-1_Tooth Surface Code,TOO03-2_Tooth Surface Code,TOO03-3_Tooth Surface Code,TOO03-4_Tooth Surface Code,'
FROM DUAL;
SELECT prp.tooth_number_cid
|| ','
|| prp.tooth_surface_cid
|| ','
|| prp.tooth_surface2_cid
|| ','
|| prp.tooth_surface3_cid
|| ','
|| prp.tooth_surface4_cid
|| ','
|| prp.tooth_surface5_cid
|| ','
FROM pa_request_procedure prp,
pa_request_service prs,
pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf
WHERE prp.pa_rqst_srvc_sid = prs.pa_rqst_srvc_sid
AND prs.pa_rqst_sid = pr.pa_rqst_sid
AND pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat';
--tooth SItuational Information
select 'Monetary Amount,Quantity' from dual;
SELECT prpt.rqst_prcdr_amt||','|| prpt.rqst_prcdr_units||','
FROM pa_rqst_prcdr_transaction prpt,
pa_request_procedure prp,
pa_request_service prs,
pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf
WHERE prpt.pa_rqst_prcdr_sid = prp.pa_rqst_prcdr_sid
AND prp.pa_rqst_srvc_sid = prs.pa_rqst_srvc_sid
AND prs.pa_rqst_sid = pr.pa_rqst_sid
AND pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat';
-- pa_rqst_prcdr_x_prvdr_lctn
select 'pa_rqst_prcdr_sid,pa_rqst_x_prvdr_lctn_sid' from dual;
SELECT prppl.pa_rqst_prcdr_sid||','|| prppl.pa_rqst_x_prvdr_lctn_sid||','
FROM pa_rqst_prcdr_x_prvdr_lctn prppl,
pa_request_procedure prp,
pa_request_service prs,
pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf
WHERE prppl.pa_rqst_prcdr_sid = prp.pa_rqst_prcdr_sid
AND prp.pa_rqst_srvc_sid = prs.pa_rqst_srvc_sid
AND prs.pa_rqst_sid = pr.pa_rqst_sid
AND pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat';
-- error Details
--Header level error details
SELECT 'pa_rqst_sid,pa_error_nmbr,pa_error_sid,reject_reason_lkpcd,follow_up_action_lkpcd,aaa_segment_loop_nmbr,run_nmbr,'
FROM DUAL;
SELECT prre.pa_rqst_sid
|| ','
|| pe.pa_error_nmbr
|| ','
|| pe.pa_error_sid
|| ','
|| ped.reject_reason_lkpcd
|| ','
|| ped.follow_up_action_lkpcd
|| ','
|| ped.aaa_segment_loop_nmbr
|| ','
|| prre.run_nmbr
|| ','
FROM pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf,
pa_request_run_error prre,
pa_error pe,
pa_error_detail ped
WHERE pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND pr.pa_rqst_sid = prre.pa_rqst_sid
AND prre.pa_error_sid = pe.pa_error_sid
AND pe.pa_error_sid = ped.pa_error_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat';
---Line Level Error Details
SELECT 'pa_rqst_sid,pa_error_nmbr,pa_error_sid,reject_reason_lkpcd,follow_up_action_lkpcd,aaa_segment_loop_nmbr'
FROM DUAL;
SELECT pr.pa_rqst_sid
|| ','
|| pe.pa_error_nmbr
|| ','
|| pe.pa_error_sid
|| ','
|| ped.reject_reason_lkpcd
|| ','
|| ped.follow_up_action_lkpcd
|| ','
|| ped.aaa_segment_loop_nmbr
|| ','
FROM pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf,
pa_request_service prs,
pa_request_procedure prp,
pa_request_procedure_run_error prpre,
pa_error pe,
pa_error_detail ped
WHERE pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND pr.pa_rqst_sid = prs.pa_rqst_sid
AND prs.pa_rqst_srvc_sid = prp.pa_rqst_srvc_sid
AND prp.pa_rqst_prcdr_sid = prpre.pa_rqst_prcdr_sid
AND prpre.pa_error_sid = pe.pa_error_sid
AND pe.pa_error_sid = ped.pa_error_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat';
SPOOL off
SET head on
SET feed on
SET termout on
SET pause on

833560 wrote:
Hi all,
I am spooling 30 query results into one CSV file ,I am getting two empty rows for each query.
Can any one suggest me how to avoid these spaces.
Thanks & Regards,
P Prakash
this is the script i am using to generate csv file .
SET linesize 12000
SET pagesize 10000
SET pause off
SET termout off
SET feed off
SET head off
SPOOL c:\tes111.csv replace
SELECT 'ISA01,ISA02,ISA03,ISA04,ISA05,ISA06,ISA07,ISA08,ISA09,ISA11,ISA12,ISA13,ISA14,ISA15,ISA16,GS01,GS02,GS03,GS04,GS05,GS06,GS07,GS08,ST01,ST02,ST03,BHT01,BHT02,BHT03,BHT04,BHT06,trnsctn_segment_count,included_trnsctn_sets_count,included_fnctnl_groups_count,input_acknwldgmnt_sid'
FROM DUAL;
SELECT ptr.athrztn_infrmtn_qlfr
|| ','
|| ptr.athrztn_infrmtn
|| ','
|| ptr.scrty_infrmtn_qlfr
|| ','
|| ptr.scrty_infrmtn
|| ','
|| ptr.intrchng_sndr_idntfr_qlfr
|| ','
|| ptr.intrchng_sndr_idntfr
|| ','
|| ptr.intrchng_rcvr_idntfr_qlfr
|| ','
|| ptr.intrchng_rcvr_idntfr
|| ','
|| ptr.intrchng_date
|| ','
|| ptr.intrchng_cntrl_stndrds_idntfr
|| ','
|| ptr.intrchng_cntrl_vrsn_nmbr
|| ','
|| ptr.intrchng_cntrl_nmbr
|| ','
|| ptr.acknwldgmnt_rqstd_indctr
|| ','
|| ptr.usg_indctr
|| ','
|| ptr.cmpnt_elmnt_sprtr
|| ','
|| ptr.fnctnl_idntfr_code
|| ','
|| ptr.aplctn_sndr_code
|| ','
|| ptr.applctn_rcvr_code
|| ','
|| ptr.fnctnl_grp_crtn_date
|| ','
|| ptr.fnctnl_grp_crtn_date
|| ','
|| ptr.grp_cntrl_nmbr
|| ','
|| ptr.rspnsbl_agncy_code
|| ','
|| ptr.vrsn_rls_indstry_idntfr_code
|| ','
|| ptr.trnsctn_set_idntfr_code
|| ','
|| ptr.trnsctn_set_cntrl_nmbr
|| ','
|| ptr.implementation_guide_vrsn_name
|| ','
|| ptr.hierarchical_structure_code
|| ','
|| ptr.trnsctn_set_purpose_lkpcd
|| ','
|| ptr.sbmtr_trnsctn_idntfr
|| ','
|| ptr.trnsctn_set_creation_date
|| ','
|| ptr.trnsctn_type_code
|| ','
|| ptr.trnsctn_segment_count
|| ','
|| ptr.included_trnsctn_sets_count
|| ','
|| ptr.included_fnctnl_groups_count
|| ','
|| ia.input_acknwldgmnt_sid
|| ','
FROM pa_transaction_request ptr, input_acknwldgmnt ia, input_batch_file ibf
WHERE ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat';
SELECT 'pa_rqst_sid,NM01,NM02,NM108,NM109'
FROM DUAL;
Hi ,
Save your query in a file and execute that file
SQL>@a.aqlHope this helps
Regards,
Achyut

How can I have "active" status on a PnP network?

I use DC++ to connect to a peer-to-peer network. Using the FIOS router, I have been relegated to "passive" status on the network, which limits the number of contacts I can make. Is there a way to configure the router for active status? TIA whh
Solved!
Go to Solution.

whh wrote:
I use DC++ to connect to a peer-to-peer network. Using the FIOS router, I have been relegated to "passive" status on the network, which limits the number of contacts I can make. Is there a way to configure the router for active status? TIA whh
The number of contacts is limited by the number of connections that you can have through the Network Address Translation Table. NAT for short. I am assuming you mean peer to peer and not Plug N Play PnP. There have been many router complaints regarding the NAT table being to small. Use the search feature at the top of the forums page and search for NAT. Other option is use your own router that is not supported by Verizon. Your ONT would need to be setup for Ethernet and if you have TV the Actiontec would need to be connected to your router. Remember custom router configurations are not supported by Verizon residential FIOS. There have been loads of postings about how to use your own router.

How to avoid purchasing multiple things that are the same but different titles

How can I avoid purchasing multiple things that are the same but have multiple names but is the same purchase for the same use?

"Things"? What things? Apps for keeping track of when to change cat litter? 30 different versions of "twinkle, twinkle little star" played by everything from punk rockers to Gregorian chant? Videos on the best way to make Christmas cake?

How to avoid printing a balnk page at the end in the Adobe form output

Hello Experts,
Can anyone please let me know as how to avoid/delete the blank page at the end of adobe form output.
I have a master page with header n footer and a body page seperate.
For ex.. I have 3 line items and i want each line item to be displayed in the new page. I am able to get this functionality . I have set the settings in the paginationb tab of the subform as
"after " Go to Next content Area" " but an extra page is getting printed at the end. 3 + 1 extra pages total. I want to avoid this blank page. I have checked the Allow page break with in content box but it is still not working.
Can someone guide me as how to solve this problem.
Any help is appreciated. Thanks in advance.
Regards,
Mahesh

hey mahesh,
this normally happens because of triggering a new page manually, what u would have done is that you would be checking for the new line item and when this condition is satisfied , you are triggering a new page , the reason for the last blank page is that the condition gets satisfied ( beacuse the line item number changes from the last line item no to initial or space).
This can be handled by doing the following
By knowing the number of line items by the following stmt.
describe table itab lines v_lines.
Now you have the value in v_lines.
use a counter in ur form and keep it increasing it by 1 ( say v_sno ) ie v_sno = v_sno + 1 in the loop of ur internal table.
ONLY WHEN V_LINES IS LESS THAN OR EQUAL TO V_SNO , TRIGGER THE NEW PAGE
this should be along with the condition which u have already put, ie when ever line item no changes
when both these conditions are satisfied , then only the new page will be triggered.
Hope it helps,
Reward if useful,
Regards,
KP.

How do I get my old printer off the network?

Hello
I have a Lexmark Z1480 - if I go onto Bonjour I can see the network webpage my my printer configurations...
I have uninstalled all Lexmark software etc as best I could and that part seems OK...
There is still however the Lexmark network webpage that my wireless printer was using to print wirelessly on my network...
How can I get rid of this webpage - I just want shot of it!!
Many Thanks,
Mr Totsy

Ok...here goes...
Uninstalled all Lexmark drivers, utilities, software junk from the HD...
Dragged and dropped the ones that didn't go at the 'uninstall' into the Trash...the machine is now completely clear
When I switch the printer on, the wireless WIFI icon on the side of the printer is still glowing 'green'...
It is clearly still connected to my wireless network somehow...
I want to install a new printer onto my network and i'm sure the software that comes with the new printer will allow me to do that no problem...
When I click on the printers network webpage (click on 'show all bookmarks'; select Bonjour; it's listed below the Bonjour intro page) it has all the settings which allow the printer to work correctly on my home network...
Here is the million dollar question...how do I delete that page? It is password protected and no doubt it will be difficult to crack, but wouldn't it be much more secure for me if it wasn't there to be cracked in the first place?
Any help on how to delete the network connection for my printer would be very much appreciated...it is still there after the uninstall process...
Any and all please wade into the debate...the more help the better...I'm a bit of a luddite when it comes to tech stuff like this...
There are plenty of Mac Experts who could give me a hand here !!!!!
Many Thanks,
Mr Totsy

Adding a new switch to the network....configuring internet access

Hey guys i need some help!
I am trying to set up my first switch. I am using the catalyst 2950 for learning on.
The network im on right now (the one with internet) has the following settings.
10.22.227.???
255.255.255.0
10.28.43.254
The one i am learning on i connect to it by going to 192.168.0.1 this will allow me into it using the Cisco Network Assistant.
I have a laptop on port 1 using Vlan1 and i have Desktop on port 24 with vlan 1 and i have a cable from our 10.22.227 network pluged into port 23
I am able to see the computers and i can share files on it. What i dont understand being a noob is why i dont have any internet on ether computer.
I have setup up port 23 as a switch.
It seams like to me i would have to give the switch a ip address a subnet mask a default gatway and a dns of the 10.22.227 network on port 23.
Can some one throw some light on the subject and point me in a good direction?

@de fl
If i go to a computer on the 10. network i can ping and go out and do everything i need to.
But if i try and ping with in the new switch (192) it does not work. I have added an ip address and a default gateway I have added a screen show on how our network is set up.
To me i think i need to add a ip address subnet mask and default gateway to the switch for the new switch to work.

How to avoid word cut when switching to next line in sap scripts

Hi,
i have long text in my sap transaction, i am fetching using READ_TXT, it contains 5 lines like below
Which is the output length of one line of text in the program
for theobject list print Text length equal to exactly 132 characters.
Which isthe output length of one line of text in the program for the object list print
Text length equal to exactly 132 characters.Which isthe output length of one line of text i
n the program for the object list print Text length equal to exactly 132 characters.
my script output line length is 132 chars., now i need to print in script without cutting the words when switching to new line.
how to achieve this functionality.
Thanks
Srini

Hi Srinivas,
You can use RKD_WORD_WRAP or TEXT_SPLIT FM to split the string into N character with out word break.
Regards,
Pavan

How to avoid one active session for the same user account concurrently

Hi all ,
i am using model 1 architecture in my application.
in my application ,if one user login through 2 browser at a time ,he can do it.
But now ,i want to close first browser or redirect him to a exception page.
plz guide me how can i do it.
plz include case1.
what happen if he close page ,not logoff
case2
what happen if power cut happen on client side.

+You can use a column in the table to check the current user logged in status. Once the user gets logged in the application change the flag at the backend. In this way you can know whether the user is already logged in the apllication or not, and based on this you can show a proper message to the user.+
+If the user closes the browser window without logging off the application, then in this case you can use the session Listoners.+
Well not the right approach Listeners would it for you.For browser closure problem.If user does that automatically container destroys the session object as per configured session-timeout.
*@OP*
Problem 1:
Try to a write an implementation of sessionListener / sessionAttributeListener (for having a check on user loggins and apply a global filter which checks available users who have already logged in)
Hope the below thread might give you some idea of how to go about.
http://forum.java.sun.com/thread.jspa?threadID=5226527&messageID=9922478
Problem 2:
consequently configure session-timeout parameter in minutes under web.xml for session browser close and inactivity state problems.
REGARDS,
RaHuL

How to avoid dual maintainence of BP in R/3 and CRM

Hello Everyone,
As you are all aware we cannot maintain financial information (like company code data) in the CRM system and at the same time we cannot maintain marketing attributes in SAP R/3. What is the preferred approached used by Clients to over come the issue of having to login to two systems to complete the maintainence of BP information?
Logically it seem to me that the BP should be created in R/3 first and then when the BP is transferred to CRM using the middleware, we can go ahead and assign the marketing attributes to it. However my client wants a one stop solution where in they can maintain all the information of a BP at one place.
Is there a way to achieve this using Portals? Can we create a Iview that displays the R/3 Customer maintainence screen and add the Marketing attributes tab page of CRM to it as a tab page which automatically pulls up the business partner for maintaining the marketing attributes? Has anyone done this before?
I would appreciate your feed back on this issue with some real time solutions you have used to overcome this.
ARP

Hello,
This needs a development on R/3 side.
1. You need to create a separate screen using some screen exit in R/3 Customer Master. This screen shall have all the requried extra fields .
2. Goto SM30 and maintain an entry in table TBE24 and maintain the following:
Product = DE_EIOUT
Text = <Any Suitable text>
Active = X
3. Goto SM30 and maintain an entry in the table TBE34
Event = DE_EIOUT
Product = DE_EIOUT
Function Module = <some Zfuniton module>
4. Now this Z- Funciton module's interface can be copied from Funcionm module
SAMPLE_FCTMODULE_DE_EIOUT. In this Z module, you write the code to read R/3 Zfields and put them in the datastructures of this module's interface
When you create/ change a customer, the data while getting replicated to CRM, will pass through this Funciton module and here we fill the Z-data into Standard available CRM fields.
Hope this works for you...
Sharif.

How to avoid displaying a blank row in the table component

Hi,
I have a create insert button and a table as in a read only form.
Each time i click on a create insert button a popup appears were the person enter the corresponding values and on clicking submit button it has to show changes in the table and on clicking cancel button it has to go back to the page.
But even when i click the cancel there is still an empty row is shown in the table. Is there a way to avoid it ?
Thanks in advance.

I am using this managed bean to refresh the table.
public class popupRefreshBean
private RichTable refreshTable;
public popupRefreshBean()
public void refreshTable(ReturnEvent returnEvent)
AdfFacesContext adf=AdfFacesContext.getCurrentInstance();
adf.addPartialTarget(this.getRefreshTable());
// Add event code here...
public void setRefreshTable(RichTable refreshTable)
this.refreshTable = refreshTable;
public RichTable getRefreshTable()
return refreshTable;
}

How to avoid Dual Active VSS switches in the network...

Similar Messages

Maybe you are looking for