How to bind value to lov based on the output from other lov

HI all, i have 2 message choice Lov, i am selected a value from the 1st lov based on this value i am a executing a query, i want to display one of the attribute value from the query result in the second LOV. i am getting the attribute value correctly but i dont know how to bind that(display) in the 2nd LOV(at runtime).

Read the dev guide LOV section, it should give you details about this implementation.

Similar Messages

How to subdivide 1 large TABLE based on the output of a VIEW

I am searching for a decent method / example code to subdivide a large table (into a global temp table (GTT) for further processing) based on a list of numeric/alphanumeric which is the resultset from a view.
I am groping with the following strategy in PL/SQL:
1 -- set up cursor, execute the view (so I have the list of identifiers)
2 -- create a second cursor (or loop?) which:
accepts each of the identifiers in turn
executes a query (EXECUTE IMMEDIATE?) on the larger table
INSERTs (or appends?) each resultset into the GTT
3 -- Then the GTT contains just the requires subset of the larger table for further processing and eventual import into iReport for reporting.
Can anyone point me to code that would "spoon feed" me on this? Or suggest the best / better way to go about it?
The scale of the issue here -- GTT is defined and ready to go, the larger table contains approx 40,000 rows and I need to extract a dozen subsets or so which add up to approx 1000 rows.
Thanks,
Rob

Welcome to the forum!
>
I am searching for a decent method / example code to subdivide a large table (into a global temp table (GTT) for further processing) based on a list of numeric/alphanumeric which is the resultset from a view.
Can anyone point me to code that would "spoon feed" me on this? Or suggest the best / better way to go about it?
The scale of the issue here -- GTT is defined and ready to go, the larger table contains approx 40,000 rows and I need to extract a dozen subsets or so which add up to approx 1000 rows.
>
No - there is no code to point you to.
As many of the previous responses indicate part of the concern is that you seem to have already chosen and partially implemented a solution but the information you provided makes us question whether you have adequately analyzed and defined the actual problem and processing that needs to happen. Here's why I have questions about your approach
1. GTT - a red flag issue - these tables are generally not needed in Oracle. So when you, or anyone says they plan to use one it raises a red flag. People want to be sure you really need one rather than not using a table at all, or just using a regular table instead of a GTT.
2. Double nested CURSOR loops - a DOUBLE red flag issue - this is almost always SLOW-BY-SLOW (row-by-row) processing at its worst. It is seldom needed, doesn't perform well and won't scale. People are going to question this choice and rightfully so.
3. EXECUTE IMMEDIATE - a red flag issue or at least a yellow/warning flag. This is definitely a legitimate methodology when it is needed but may times developers resort to it when it isn't needed because it seems easier than doing the hard work of actually defining ALL of the requirements. It seems easier because it appears that it will allow and work for those 'unexpected' things that seem to come up in new development.
Unfortunately most of those unexpected things come up because the developer did not adequately define all of the requirements. The code may execute when those things arise but it likely won't do the right thing.
Seeing all three of those red flag issues in the same question is like waving a red flag at a charging bull. The responses you get are all likely to be of the 'DO NOT DO THAT' variety.
You are correct that a work table is appropriate when there is business logic to be applied to a set of data that cannot be applied using SQL alone. Use a regular table unless
1. you plan to have multiple sessions working with the table simutaneously,
2. each session needs to work with ONLY their own data in that table and not data from other sessions
3. the data does NOT need to be available after the session ends
4. you actually need a GTT to take advantage of the automatic data preservation (ON COMMIT PRESERVE/DELETE) functionality
Remember - when a session ends the data in the GTT is gone. That can makek it very difficult to troubleshoot data related problems since a different session can't see what data is in the table. Even if a GTT is needed for the final product it is very useful to use a regular table so that the data can be examined after test runs to help find and fix problems. Then after development is complete and initial testing is done a GTT would be substituted and final testing performed.
So the main remaining question is why you need to perform multiple dynamic queries to get the data populated into the work table? Especially why is a nested cursor loop needed? My suspicion is that you have the queries stored in a query table and one of your loops extracts the query and executes it dynamically.
How many queries are we talking about? Do these queries change from run to run? Please provide more detail of the process and an example query for the selection filtering as well as a typical dynamic query you plan to use.

How to default value on bet01 based on ansal

Dear Freinds
            i would like to know how to default the value for bet01 based on the
calculated on ansal
i want is
q0008-bet01 = p0008-ansal /100.
Can i default the value using the user exit ZXPADU01 or ZXPADU02. . As my ueser exit is not triggering without me entering to bet01 .
how can i do defaulting the value on bet01 ,
regards
shanti

Dear Chritisn
             in my code i have done same thing what you have said as follows
i have written the coding in ZXPADU02 as below
data : wa_p0008 like p0008,
        i0008 like p0008,
       l_v_ANSAL type ANSAL_15,
       l_v_amount type PAD_AMT7S.
CASE innnn-infty.
when '0008'.
MOVE-CORRESPONDING innnn to wa_p0008.
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
if l_v_amount ne wa_p0008-bet01.
move l_v_amount to wa_p0008-bet01.
MOVE-CORRESPONDING wa_p0008 to innnn.------ at this point
endif.
when others.
endcase.
I have used move corresponding because i am getting the error as the strucutr eof INNNN to that WA_P0008 is different (unicode compatability error) ...
now i can see the data in wa_p0008 and when i have move into innnn ..... i can see all the data in debuggin except the bet01 value as below
in wa_p0008 the data in debugin is as follows
PERNR     N     8      00000004
INFTY     C     4      0008
SUBTY     C     4      0
OBJPS     C     2
SPRPS     C     1
ENDDA     D     8      99991231
BEGDA     D     8      20070716
SEQNR     N     3      000
AEDTM     D     8      00000000
UNAME     C     12
HISTO     C     1
ITXEX     C     1
REFEX     C     1
ORDEX     C     1
ITBLD     C     2
PREAS     C     2
FLAG1     C     1
FLAG2     C     1
FLAG3     C     1
FLAG4     C     1
RESE1     C     2
RESE2     C     2
GRPVL     C     4
TRFAR     C     2      01
TRFGB     C     2      01
TRFGR     C     8      E1
TRFST     C     2      08
STVOR     D     8      00000000
ORZST     C     2
PARTN     C     2                                                                                WAERS     C     5      HKD
VGLTA     C     2
VGLGB     C     2
VGLGR     C     8
VGLST     C     2
VGLSV     D     8      00000000
BSGRD     P     3      100.00
DIVGV     P     3      165.00
ANSAL     P     8           1000.00 -
value entered on the screen
FALGK     C     10
FALGR     C     6
LGA01     C     4      MFPY
BET01     P     7              10.00 ---after calculation the value(1000/10)
ANZ01     P     4          0.00
EIN01     C     3
innn structure in debuggin as follows:
PERNR     N     8      00000004
INFTY     C     4      0008
SUBTY     C     4      0
OBJPS     C     2
SPRPS     C     1
ENDDA     D     8      99991231
BEGDA     D     8      20070716
SEQNR     N     3      000
AEDTM     D     8      00000000
UNAME     C     12
HISTO     C     1
ITXEX     C     1
REFEX     C     1
ORDEX     C     1
PREAS     C     2
FLAG1     C     1
FLAG2     C     1
FLAG3     C     1
FLAG4     C     1
RESE1     C     2
RESE2     C     2
GRPVL     C     4
DATA1     C     250     0101E1      0800000000    HKD                00000000#ᘌ౐###ఀ                MFPY######        ######        ######        ######
DATA2     C     250
we can see in the debuggin for the DATA1 it is having the MFPY value but i dont find the value for bet01 ..........
and iam not getting the value on the screen in PA30 for the bet01.
please let me know what i have to do , and let me know where i went wrong.
regards
shanti

How to bind values for input parameters from an adf table?

Hi,
The version I am using is
Jdev TP4 11.1.1.0.0
I need to know how to bind values for input parameters to methods.
I have created an af:table and I have a button created using a method which is outside the af:table. This method needs to take input parameter values from the column values in the table.
When I have an adf form instead of the table the binding works.
Any help?
Thanks.

Hi Balaji,
you need to bind you table to a backing bean and call a method in the backing bean when you hit the button. In the method you get the selected row from the table and have access to the columns of it. Then call the the method with the parameters.
To bind the table to a bean select the properties of the table, go to behavior section and look for the advanced section 'Binding' property.
Select the small down arrow at the right side and click edit. In the dialog select or create a bean and property for the table.
Go to the button properties, look for 'Action', again select the small down arrow and click 'Edit'. Select the bean which holds the table property and create a method for the button.
The method look like    public void bearbeitenQuelle(ActionEvent actionEvent)
        // Add event code here...
        RichTable lTable = getYourTable();
        Object lData = lTable.getSelectedRowData();
        FacesCtrlHierNodeBinding lNB = (FacesCtrlHierNodeBinding) lData;
        YourViewRow lRow = (YourViewRow ) lNB.getCurrentRow();
    }Hope the get you started
Timo

How to create a matrix with constant values and multiply it with the output of adc

How to create a matrix with constant values and multiply it with the output of adc

nitinkajay wrote:
How to create a matrix with constant values and multiply it with the output of adc
Place array constant on diagram, drag a double to it, r-click "add dimension". There, a constant 2D double array, a matrix.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

How to configuration of pricing procedure based on the Region

Hi,
please help me how to configuration of pricing procedure based on the Region in the roll out project.
Thanks
mustafa

What I proposed to do was,
a. Create routes like 0 day route, 1 Day route, 2 day route etc.
b. Route determination is based on the Shipping condition of the customer. Put in the shipping condition for the customer as 00 - immediate delivery. 01 - By Truck, 02 - By Rail, 03 - Ship etc
c. Now, put in your route determination in such a way that routes change in the sales order with shipping condition (SC). Like, if the shipping condition is set to 00, then 0 day route comes up. Meaning immediate delivery, if SC is 01, then your normal route by truck picks up. etc.
When the sales order is manually created, you know the time of creation. As route is one of the criteria, the material confirmation happens based on number of days you put in the route to reach the destination. Now that you have the material available for today's delivery, the delivery program can be run to create it, or it can be manually created.
Now, when you configure the route you have to specify 'Transit duration in calendar days'.
When you have the sales order created electronically (say thru EDI), then, you may have to ask them to send in shipping condition. Else, you have to modify the function module Idoc_input_orders in such a way that if the sales order creation time is < 12 PM, then put shipping condition as 00, else copy what ever is there in the customer.
If you do not want to check the time manually when the user creates the sales order, then you may have to use the user exit MV45AFZZ (and I think you can use Save_order_prepare) to check the time and change the shipping condition. By this you will avoid extra coding in Idoc_input_orders and also need not bother if the user changed the route or not.
Hope my explanation helps.
Regards,
Mukund S

DIO Pass or Fail Tests: LabVIEW would have to determine the expected result or results (1 or 2 of a possible 25) based on the output pattern send out (1 of 65K).

I am trying to come up with a plan to write a LabVIEW VI to do the following test. Can you give me a few ideas how to do this in LabVIEW. I am a new to LabView. I think I how to read and write I/O ports and do comparisons. I need a little guidance on the error checking. In simple terms the test will go like this:
I have 16 digital inputs and 16 outputs.
The 16 outputs are turned on in a specific pattern (i.e. 1001000101011101) and then the 16 inputs (i.e. 1000101111111111) are read in after a time delay. The inputs are checked to see if they match the expected results. If they do it's a pass if not it's a f
ailure. This seems pretty straightforward. And I think I have an idea how to do it. Here's the problem. The inputs are changed sequentially so that all possible combinations are tried. The test needs to determine if the resulting input pattern is correct based on the outputs that were sent out. 16 outputs give 65K possible tests. For each tests there would be 1 or 2 possible results with a total of 25 results for the entire 65K possible tests. LabVIEW would have to determine the expected result or results (1 or 2 of the 25) based on the output pattern send out (1 of 65K). Then it would have to compare the actual input pattern received to see if it's a pass or fail?
Any ideas how I can approach this?

The 16 outputs are simulating inputs to the device under test, (simulating remote switches and contacts). The object of the test is to test every possible combination to ensure that nothing unexpected happens at the output. The device under test is a logic motor control system and we want to make sure (among other things) that we don’t start or stop the motor when its not suppose to. How can only two tests do that?
I think you are describing how to create an array with the results. But I still don’t know how to determine what the result should be and if it is correct.
I’ve identified 25 possible valid states the motor controller can be in.
I’ve also identified the correct outputs that determine each of the 25 states.
I’ve also
identified the possible valid states you can go to from each (previous) state, You can only get to a valid new state from a previous state if the right combination of inputs is applied (we hope).
If you know what state you are in when start and you know the valid states you can go to and the inputs required to get there, you should be able test the system against that. You verify this by checking the outputs against what they should be. With 65K possible inputs combination, checking them all manually would be quite is a task. Putting this into LabView is my task.

How can I access my iCloud account on the web from my phone

how can I access my iCloud account on the web from my phone
iPhone 5 iOS 8.3
I have iCloud turned on, location services on, find my phone works but when I try to access iCloud via Safari on the phone it takes me to a page Apple.com,
iCloud then three options
set up iCloud on my phone (i have)
Install Find my phone, it is installed and it works from my MBP
or install find my friends, I don't need that I have no friends.
my calendars and contacts and bookmarks and all are all sync'd and working on the phone, but i thought if I typed in iCloud.com on the phone in Safari I would go to my iCloud web page that looks like this on my Mac.
Is that NOT how iCloud should/would look on my phone via Safari?
This is maybe a dumb question after 3+ year of iPhone'ing
thank you for clarifying or helping me to understand
jojoguitar_mmn_usa

I've been playing with a Galaxy here at work and here's what I've found so far - please feel free to jump in and suggest alternative methods to configure or access the various icloud components.
So the original Q: Can you access your icloud account on Android?
Not entirely: the website can't be used from an android browser (not properly - even with Dolphin HD and posing as different browsers it won't load correctly. So Find my iphone is out, so is the address book or looking at your e-mail or calendar just in a browser window
I was able to setup my e-mail using the IMAP settings published here:
http://support.apple.com/kb/HT4864
Be sure to setup the account manually - and note if you have trouble using SSL try TLS (that worked for me)
Address book is a no go so you'll have to use iTunes to sync all your contacts over to Gmail - if you still have an iPad it means managing contacts in two places though . Same goes for your calendar - transfer it to Gmail and forget about iCloud's calendar. Nice instructions here: http://howto.cnet.com/8301-11310_39-20064060-285/how-to-switch-from-iphone-to-an droid/
iWork is an Apple proprietary bit so don't expect much there.
So in my case, if I'm really going to make the switch to a Galaxy from my iPhone it really means I'm going to have to switch to using google as the backend. The timing to swap over to a galaxy/android phone is not the greatest - given that I'd have to give up my Apple addiction (syncing photos and itunes and losing access to my device tracking). Plus I still have an iPad and a mac and like living in the Apple ecosystem. I think I'll wait and see what the new iPhone looks like before I commit

OBIEE Report - filter based on the result from another analysis

Hi,
I am using OBIEE 11g,
I am trying to use a filter which is based on the result from another analysis. I have an analysis A which is as table 1, and I want to filter the respective columns of analysis B (Table B) based on analysis A to remove the duplicates for march 01, 02, and 07 , but it is not working properly. I took a max of start and end time when I created analysis A. Please let me know if I did anything wrong. thanks.
Table 1
Employee Number
Date
IN
Out
Start Time
End Time
xxxxxxx
2015-02-26
9:00
13:00
00:00:00
00:00:00
2015-02-27
12:00
18:00
00:00:00
00:00:00
2015-02-28
8:00
14:00
00:00:00
00:00:00
2015-03-01
14:00
20:00
14:00:00
20:00:00
2015-03-02
16:00
20:00
16:00:00
20:00:00
2015-03-07
14:06
20:02
14:00:00
20:00:00
2015-03-11
16:00
20:00
16:00:00
20:00:00
2015-03-14
8:00
14:00
00:00:00
00:00:00
2015-03-25
14:00
20:00
16:00:00
20:00:00
Table 2
Employee Number
Date
IN
Out
Start Time
End Time
Hours
xxxxxxx
2015-02-26
9:00
13:00
00:00:00
00:00:00
-3
2015-02-27
12:00
18:00
00:00:00
00:00:00
6
2015-02-28
8:00
14:00
00:00:00
00:00:00
6
2015-03-01
14:00
20:00
00:00:00
00:00:00
6
14:00:00
20:00:00
6
2015-03-02
16:00
20:00
00:00:00
00:00:00
4
16:00:00
20:00:00
4
2015-03-07
14:06
20:02
00:00:00
00:00:00
6
14:00:00
20:00:00
6
2015-03-11
16:00
20:00
16:00:00
20:00:00
4
2015-03-14
8:00
14:00
00:00:00
00:00:00
6
2015-03-25
14:00
20:00
16:00:00
20:00:00
4

Why avg here?
What columns you want to show in the report?
for a employee for given date if he have 2 rows then you may sum up hours right?
Employee Number
Date
IN
Out
Start Time
End Time
Hours

I want to download an audiobook, but my daughter has a giftcard credit on the account. How can I download my audiobook without using the money from her giftcard?

I want to download an audiobook, but my daughter has a gift card on the account. How can I download my audiobook without using the money from her gift card?

go directly to your ibook app. and you're going to find it. it's only with ibooks app.
best
Olivier
<Edited by Host>

How can I connect personal hotspot to use the internet from my phone on my laptop?

I do not have internet at home and want to be able to connect using the personal hotspot on my phone. How do i do this??

How much would be a month?
       From: Verizon Wireless Customer Support <[email protected]>
To: kelly johnson <[email protected]>
Sent: Wednesday, October 8, 2014 12:02 PM
Subject: - How can I connect personal hotspot to use the internet from my phone on my laptop?
#yiv3595356488 img
|
|
|
A message from the Verizon Wireless Community
|
|   |
How can I connect personal hotspot to use the internet from my phone on my laptop?
created by Verizon Wireless Customer Support in iPhone 4S - View the full discussion             Hello kmj65
Thanks for replying. The plan you have it would be an additional charge to add the hotspot feature. It's not free with the Nationwide plan. You would need to add the feature online at www.verizonwireless.com/myverizon
JoeL_VZW
Follow us on Twitter @VZWSupport   Reply to this message by replying to this email -or- go to the message on Verizon Wireless Community Start a new discussion in iPhone 4S by email or at Verizon Wireless Community
|
|
© 2014 Verizon Wireless
Verizon Wireless
One Verizon Way
Mail Code: 180WVB
Basking Ridge, NJ 07920
Not interested in these emails anymore, or want to change how often they come? Update your email preferences by visiting https://community.verizonwireless.com/user-preferences!input.jspa.
|
We respect your privacy. Please review our privacy policy for more information
about click activity with Verizon Wireless and links included in this email.
|
|
|

How to disable save button on selection screen (1000) run from other report

Hi Experts,
Can any one let me know how to disable save button on selection screen (1000) run from other report.
Say I am running from report R1 which submits report R2, but the save button should be disabled on
report R2(selection screen 100).
Thanks in advance.
Regards
RP.

Hi RPReddy16 ,
Try this:
DATA :BEGIN OF t_extab occurs 0,
fcode like rsmpe-func,
END OF t_extab.
REFRESH T_EXTAB.
MOVE 'SAVE' TO T_EXTAB-FCODE.
APPEND T_EXTAB.
CLEAR T_EXTAB.
SET PF-STATUS 'STATUS' EXCLUDING T_EXTAB.
Regards,
José

How to read and store the documents from other system to own system.

Hi Experts,
i need to read the document from other system (Say from other connected R/3 system) and then i need to save it in my system.
Please suggest how would i proceed?
Any helpful suggestion will be rewarded with points.
thanks
Snehasish

Hi Abaper
I think I havent explained my problem well. Here I am explaining it again..
I want to pull an *.excel/ *.csv file through ABAP code.The target file that I want to access in my ABAP code is stored into another PC in the same Local area network under some directory say 'c:\temp\credit.csv'.
I have the logon information of the target file's PC.
Please help me with code if anyone of you having.
Thanks in advance.
Rgds,
Snehasish
Edited by: Snehasish Das on Apr 29, 2008 2:18 PM
Edited by: Snehasish Das on Apr 29, 2008 2:33 PM

How to view data in tables by selecting the synonym from the database objec

I could not figure out how to view data in tables by selecting the synonym from the database objects navigation tree. I had to first choose the synonym, view the details of the synonym to determine the table name, and then select the table from the database objects tree. Is this the only way available?

This functionality currently does not exist. I don't see it on the 1.1 statement of direction either, so perhaps someone from Oracle can give some insight as to when this could be expected.
Eric

How to have iPad (iOS 5) import only the JPEG from a RAW JPEG pair?

I have an iPad 2 16 GB, running iOS 5. I also have a Canon EOS 7D. I purchased a CF Card Reader for the iPad (see http://store.micgadget.com/card-readers/280-ipad-2-cf-card-camera-connection-kit .html) so that I can view and edit photos quickly in the field, without having to lug my laptop around. To make this easier, I set my camera to shoot RAW+JPEG. I shoot with the smallest JPEG files possible, still a relatively large for the iPad 2,592x1,728, with the idea that I'd only import the JPEG files to the iPad, but still have the RAW files to work with when I get back to my computer. This works great with one exception: the iPad doesn't allow me to import only the JPEG files, but grabs the RAW files along with them. As you can imagine, this fills up my iPad rather quickly, and takes quite a bit longer to import than if it only grabbed the JPEGs.
So here is my question: How do I have my iPad import only the JPEGs from the RAW+JPEG pairs on the memory card?
One workaround that helps slightly. If I connect my iPad to my computer after the import, I can go in via Image Capture, select all the RAW images and delete them, leaving the JPEGs behind. This is an underwhelming solution, but does save space after the fact.

What you are seeing is how Safari works now in iOS 5. There is no way to get that icon in Safari now. There other much better browsers available in the App Store. Look at iCab Mobile, Mercury, Atomic, ....
I have been running iOS 5x for so long now, that I don't even remember if that icon did appear in earlier iOS versions

How to bind value to lov based on the output from other lov

Similar Messages

Maybe you are looking for