How to bootstrap swiz to work in application loaded in a portal

Hi,
I have a portal and I'm loading a couple of applicaitons using SWFLoaders which are using the Swiz framework. When loaded in the portal, the Swiz framework is not loading any beans or data. If the applicaiton is run outside the portal it works fine. The SWFLoader is a child of the portal, same security and application domain.
I don't know how to make swiz work. I also created a bootstrapper to load the portal and share classes but I get a compile error if I try this:
import  org.swizframework.Swiz;Swiz;
It doesn't do anything. If I add this same line to the portal, it still doesn't do anything. How can Swiz work for children applications loaded in the portal?
Thanks you.

On Saturday 06 Mar 2010, fatima.m wrote oops, can't say wrote colon because
the forum software explodes:
doesn't do anything. How can Swiz work for children applications loaded in
the portal?
Support was added in the recent 1.0 beta, I think. Try asking on their mailing
list.
Tom Chiverton
Developer
[email protected]
3 Hardman Square, Manchester, M3 3EB
This email is sent for and on behalf of Halliwells LLP.
Halliwells LLP is a limited liability partnership registered in England and Wales under registered number OC307980 whose registered office address is at Halliwells LLP, 3 Hardman Square, Spinningfields, Manchester, M3 3EB.  A list of members is available for inspection at the registered office together with a list of those non members who are referred to as partners.  We use the word ?partner? to refer to a member of the LLP, or an employee or consultant with equivalent standing and qualifications. Regulated by the Solicitors Regulation Authority.
CONFIDENTIALITY
This email is intended only for the use of the addressee named above and may be confidential or legally privileged.  If you are not the addressee you must not read it and must not use any information contained in nor copy it nor inform any person other than Halliwells LLP or the addressee of its existence or contents.  If you have received this email in error please delete it and notify Halliwells LLP IT Department on 0870 365 2500.
For more information about Halliwells LLP visit www.halliwells.com.

Similar Messages

  • Breadcrumb in BSP is not working when application is called inside Portal.

    Dear All,
                We have implemented SAP Learning Solution by integrating it with SAP EP 7.0.
    We called the BSP Application HCM_LEARNING inside portal  using BSP iView template.
    The problem we are facing is, the breadcrumbs in the BSP application "HCM_LEARNING"  is working fine when it is called as a standalone application. But the same is not working when it is called inside portal framework page.
    Enterprise Portal breadcrumbs are working fine.
    How could we resolve this.?
    Regards,
    Eben Joyson.

    this is the radio button
    <af:selectOneRadio value="#{bindings.Gender1.inputValue}"
                                                     label="#{bindings.Gender1.label}"
                                                     required="#{bindings.Gender1.hints.mandatory}"
                                                     shortDesc="#{bindings.Gender1.hints.tooltip}"
                                                     id="sor5">
                <f:selectItems value="#{bindings.Gender1.items}" id="si7"/>
              </af:selectOneRadio>
    i use this sample
    http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/ADF_Insider_Essentials/ADF_Insider_Essential_YesNoRadio/ADF_Insider_Essential_YesNoRadio.html

  • Ad Mob not working in Application Loader Error

    Hi Adobe AIR community,
    I've been having this problem for a while now. Basically I have been using AIR for iOS 15.0, Flash CC (2014) and Milkman Games Ad Mob ANE v.4.4.0.
    I can test my apps perfectly on both iPhone and iPad devices. The Ad Mob banner and full screen ads work very well while testing in a development environment.
    When I try to upload my app to the App Store using Application Loader v3.0 I get an error stating "error ITMS-9000: Invalid Bundle. The bundle my_app.app does not support the minimum OS Version specified in the Info.plist"
    Now funny thing is when I remove the ANE the app uploads to the App Store just fine.
    I have been forced to stop using ads in my AIR for iOS apps since the release of iOS 8.
    I have also contacted Milkman Games support but they tell me that I am the only one with the problem and that support tech can't recreate the problem.
    Also I am using OSX 10.10.1 and I believe that xCode has been updated to version 6.1.1 (not sure if updating xCode makes any difference but I have updated it tonight and I have not tried to re-upload the app since)
    Does anyone know what I can do? Any help would be very appreciated.
    Thank you very much!

    Hi Colin,
    I have tried this and I still get the same error. I entered it in the xml file like this:
    <iPhone>
            <requestedDisplayResolution>high</requestedDisplayResolution>
            <InfoAdditions><![CDATA[
        <key>MinimumOSVersion</key><string>6.0</string>
        <key>UIDeviceFamily</key>
        <array><string>1</string><string>2</string></array>
    ]]></InfoAdditions>
        </iPhone>

  • How can I upload my app by application loader?

    My status is "waiting for upload".
    But I choose the .app file by the application loader.
    How come?

    Follow the walk-thru in TN 2250

  • I tried to set up a remote desktop between my macmini and my work computer.  I hit cancel and now the Remote Desktop will not close.  I cannot shut down my computer either.  How do you close a non-responsive application.  I have tried everything!

    I tried to set up a remote desktop connection between my MacMini and my work computer.  It was not working so I hit cancel, but then the big black screen of death came up and will not go a way.  I cannot close my computer nor quit the remote desktop connection.  How do you close a non-responsive application?  By the way, I am new to Mac and it is not as simple as hitting the Control, Alt, Delete.  Please help.

    virginiafromphoenix wrote:
    .......How do you close a non-responsive application?.......
    Try ( alt + cmd + esc ).  Gives you a menu of running applications, and a chance to "Force Quit".

  • I have updated to OS X 10.9 and now can't open Aperture, message reads You can't use this version of the application "Aperture" with this version of OS X. You have "Aperture" 3.2.3... all i need to know is how to get Aperture to work again..help !

    I have just updated to OS X 10.9 and now find that I can't open Aperture to access photos etc, message reads : You can't use this version of the application "Aperture" with this version of OS X. You have "Aperture" 3.2.3... whichj is not a lot of help, i have limited technical ability and all i need to know is how to get Aperture to work again...help !

    Software Update?

  • I bought CS6 creative suite. As of now i need to work each application in separate separate system. Can any one please help me how to solve this problem.

    I bought CS6 creative suite. As of now i need to work each application in separate separate system. Can any one please help me how to solve this problem.
    I saw the below quote on Adobe forum
    "You may install software on up to two computers. These two computers can be Windows, Mac OS, or one each."
    If i install each application in single single system the system count is more than two. In this case, are we have any license issue? Please advice how the problem will solve?
    If possible please send the advise to my mail id: <Removed by Moderator>
    Thanks
    Uvaraj S

    I already answered that.  If you purchased a Suite then you can only install and activate it on two machines.  Even if you only insdtall one of the applications of that suite, it counts as one activation of the suite.  You cannot take the six or seven different applications that might be in a suite and install and activate them in six or seven different machines... only two machines.
    If your scenario will allow for it, one thing you can do is install the programs on all the different machines and only activate two of the machines at any given time.  If you need to activate a program on a third machine then you need to deactivate on one of the currently activate machines first so that you have an open activation to use again.  I do not remember if there is a limit to the total number of activations you can process for the life of the software.

  • TS1702 HOW TO CANCEL AN SUBSCRITION  FOR AN APPLICATION THAT DOES NOT WORK

    HOW TO CANCEL AN SUBSCRITION  FOR AN APPLICATION THAT DOES NOT WORK

    Please stop SHOUTING at us.
    http://support.apple.com/kb/ht4098

  • How to pass input arguments to Worker Role Application using Powershell

    Hi All,
    I have a worker role running in Windows Azure Portal. I need to pass arguments to this Worker role service and get the output by using PowerShell.
    Can someone please specify how this can be achieved using PowerShell?
    Thanks and Regards,
    Vivek

    Hi,
     Please refer to the Following StackOverflow article that talks about how to configure PAAS instances for Powershell remoting.
     http://stackoverflow.com/questions/15787768/accessing-azure-cloud-service-paas-instances-via-powershell-remoting
    Regards,
    Nithin Rathnakar

  • How can I get back into my application aftermath invoking Start up page of index.htm ?

    Gorgeous Hello All,
    If anyone of you can please provide me a solution for the following, will help me in plentious and galore.
    Am using Adobe RoboHelp, Version 10 and IE version being 10.
    A hurdle :-
    I have a application which has been developed in ASP .NET, Version 4.0. Help link has been created in this application wherein here the Start up page of index.htm has been linked to be read from the RoboHelp local project folder\!SSL!\Multiscreen_HTML5\desktop. All are working absolutely fine except when
    I login into the above-said application -> click on the Help page -> the index.htm opens with Contents, Index, Glossary -> Am able to successfully perform any task by respective clickings
    -> But I am not able to get back into my application when I click on the IE provided Back button (Alt+Left) -> Any amount of invoking Back button makes the system getting looped into this Start up page of index.htm only -> When I Close Tab (Ctrl + W) or Close ( X ) -> The window session gets closed and I have to repeat all by relogin once again.
    How can I get back into my application aftermath invoking Start up page of index.htm ?
    (I can always get back into the application easily by erasing those parts in the url which refers to this RoboHelp linkages – but this certainly looks non-polished work)
    Help Please
    Cheese – Vipin Nambiar, Bangalore

    Hey Jeff, I used Internet Explorer 10.0.9200 and Google Chrome 26.0.1410. Alas - it is the same behavior.
    (But Jeff : When I used Microsoft HTML Help as primary layout to generate chm file , My Help when launched from my Application opened in a new browser window and when I closed this Help browser window did not close my application. Looks like need to write few liner code to get this issue settled )
    Thanks Indeed of lots for your concerns Jeff !!!

  • Session time out when working in application level

    Hi
    We are upgraded our PROD environment from 11.5.10.2 to R12.1.3
    When end user working at application level then it is throughing the session time out error, end user is not idle state he active and working on application level
    I have checked the profile ICX:Session Timeout it is 30
    Thanks
    Shaik

    Hi;
    Please see:
    ICX:SESSION TIME OUT
    Re: Inccreasing the timeout  parameter for the Oracle R12 session
    Also see:
    How AutoConfig sets ICX: Session Timeout [ID 307149.1]
    How To Manage Timeout at Responsibility Level [ID 412224.1]
    Regard
    Helios

  • How to deploy a secured ADF 11g application to WebLogic 10.3 server?

    Hi,
    I have just enabled security in our ADF 11g application, as descripbed in [chapter 29|http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/adding_security.htm#insertedID0] of the Fusion Developer's Guide. It works fine in the embedded WebLogic server of JDeveloper.
    Now I'm trying to deploy to our WebLogic 10.3 server, which runs in production mode. I'm running into all sorts of problems. The WebLogic console seems to have hundreds of security related pages, I don't know which one I should use, let alone how to use it. The Fusion Developer's Guide doesn't cover deployment to a production server:
    >
    When the target server is configured for production mode, you typically handle the migration task outside of JDeveloper using tools like Oracle Enterprise Manager. For details about using tools outside of JDeveloper to migrate the policy store to the domain-level in a production environment, see the [Oracle Fusion Middleware Security Guide|http://download.oracle.com/docs/cd/E12839_01/core.1111/e10043/toc.htm].
    >
    However, this guide is of very little help to me. I found [chapter 7|http://download.oracle.com/docs/cd/E12839_01/core.1111/e10043/addlsecfea.htm#insertedID0], which says "The recommended tool is Fusion Middleware Control." I have no idea what "Fusion Middleware Control" is, where to get it and how to use it.
    Long story short: I'm totally lost. I'm looking for a step by step guide on how to deploy a secured ADF 11g application to a WegLogic 10.3 server that is running in production mode. Any help is highly appreciated.

    Ok, I found a [very helpful blog post |http://andrejusb.blogspot.com/2009/01/practical-adf-security-deployment-on.html] by [Andrejus Baranovski|http://www.blogger.com/profile/04468230464412457426]. I wish Oracle's documentation was as clear as this...
    The blog post refers to an article by Steve Muench, called [Simplified ADF 11g Application Credential and Policy Migration to Standalone WebLogic Servers|http://www.oracle.com/technology/products/jdev/tips/muench/credmig111100/index.html]. This article presents an Ant script that migrates policies from JDeveloper to WebLogic, using some PFM. (See the last definition here.)
    The problem is that Steve Muench's script assumes that JDeveloper and the standalone WebLogic are on the same machine. However, in a typical environment, such as the one I'm working in currently, this is not the case. In our case the developer stations are Windows machines, while our WebLogic server runs on a HP-UX machine. So the question is: how to perform this migration between two machines with different operating systems?
    Regards,
    Bart Kummel

  • YES! How to make PRINT QUOTAS WORK with 10.4

    How to make PRINT QUOTAS WORK in 10.4
    After struggling for quite some time, I finally found a pretty simple way to make print quotas work.
    First, I’ll tell you our setup. We have 3 different computer centers with a variety of eMacs and new Intel iMacs, all clients are running 10.4.8, and each of those 3 centers has its own HP Laserjet 4200 printer. Our dual G5 server is running Server v.10.4.8. Client computers and printers have static IP addresses. All clients are bound to the server with the standard WorkGroup Manager/ LDAPv3 Directory Access scheme - such that all students login to the clients with their network username/password to mount their home directory on the client.
    Next, I’ll tell you what does not work. IF YOU WANT PRINT QUOTAS TO WORK, you cannot use Workgroup Manager to assign a printer to any managed user account, user group, or computer group. Why? Because when you go to a client, and Show Info on the printer that is being pushed by Workgroup Manager, you’ll see that the queue name is not the queue that you’ve setup in Server Admin. Instead, you’ll see the queue name is “MCX” or something along those lines. Even if you manually edit the Workgroup print preference file that is being pushed to clients, it still will not work.
    Drawbacks of my technique: In my case, students will see all 3 printers (1 from each lab) available to them no matter which lab they are in. Not the best, but for now I think it’ll be worth it to be able to control wasteful printing. Students may be able to move/delete the preference file (see below), but they’ll only be hurting themselves, as they won’t have any printers at all then.
    Okay, here’s how I did it:
    1. If you have setup any printers to be pushed out via Workgroup Manager’s preference enforcement to individual users, usergroups, or computer groups, turn those preferences off and leave them off.
    2. Delete any existing printers in your Printer Setup Utility and/or Server Admin. Add and setup a new printer queue using the Server Admin> Print service. I added the printer through the Server Admin application, not Printer Setup Utility (may not matter). However, I did go into that latter utility to set the model of the printer. Now, back in Server Admin, edit the printer queue to turn on these services IPP, LPR (bonjour off), and of course check off the enforce quotas box. (No student Windows clients, so I didn’t tinker with SMB print service). I went ahead and specified the standard cover sheet – it will be handy while troubleshooting.
    3. In Workgroup Manager, select the users that you want to enforce quotas upon, go to the Printer Quota tab (not the preference pane) and, in my case, I selected All Queues and specified a quota, and clicked Save.
    4. Delete all printers that appear in the Printer Setup Utility from each client computer (I know, UGH).
    5. For all network users, you need to edit a preference file and put it into each user’s home directory. That file is “com.apple.print.favorites.plist” and as you guessed, it needs to go into the Library> Preferences folder of every one of your network users’ home directories. Now, the content of that file is crucial… what it should show is the name of the queue(s) you created in Server Admin above, and be immediately followed by an “@” and the address of the server that is hosting that queue. For example, my queue’s name is TCStudentQ and the server’s address is student.mydomain.org… so my preference file has this entry: [email protected]. If you have more than one queue, you’ll have more entries. Be sure that the network user has at least Read level access under Group or Others. I’d recommend making the server System account the Owner of the file, and be sure to lock the file so the users can’t easily trash it. If you don’t know how to create this file in the first place, what you can do is go to a client computer, and log into the client with a dummy network account. Then open Printer Setup Utility, and you should see the queue you created in step 2. Add that printer, and then the file will be created in your dummy account’s home directory under Library> Preferences. Now you can use that file to distribute to other user’s folders… but don’t forget that each user needs Read level access.
    6. That’s it. Works for me. When they exceed the quota, all that spits out is the cover page. It’d be nice if there was a quota monitor utility on the client side so users can see how many pages they have remaining and when the quota will automatically reset. I plan to start the quota on a Monday morning and go on a weekly duration. Not sure what a good starting point is… perhaps 25 pages every school week.
    7. Hey Apple Computer, Inc. Server Developers & Project Managers, I truly hope you’re reading this and can explain why print quotas don’t function as you have documented and advertised. I don’t mean to toot my own horn, but I’ve spent way too much time discovering this workaround, and I know it will help thousands of others with the same problem. I can see where your Print Quota system breaks down, and I think you need to fix these issues or at least document them. Don’t forget to fix serious 10.4 Server bugs before leaving it behind for 10.5 Server – many of us will continue using 10.4 Server for at least another year or two.

    David,
    Your assumption that I didn't read the documentation is incorrect. I read that 10.4 documentation over and over - followed it to the letter to no avail. Perhaps it was updated in the last few weeks? So, do you have a fully operable printer quota system in conjunction with a managed computer or user group that has a managed printer pushed to the group via Workgroup Manager? I can push a managed printer to a managed group without a problem, but the quotas won't be enforced unless I use the workaround above and cut Workgroup Manager's managed/pushed printer out of the picture.
    I know this is a user-to-user forum - however, I'm also aware that Apple tech support often chime in here, so it doesn't hurt to post a message to them in the context of a larger posting about a 'known issue'. I have used the server feedback form... hasn't seemed to me to be very helpful in the past.

  • How can I make server use single class loader for several applications

    I have several web/ejb applications. These applications use some common libraries and should share instances of classes from those libraries.
    But applications are being deployed independently thus packaging all them to EAR is not acceptable.
    I suppose the problem is that each application uses separate class loader.
    How can I make AS use single class loader for a set of applications?
    Different applications depend on different libraries so I need a way that will not share library for all applications on the domain but only for some exact applications.
    When I placed common jar to *%domain%/lib* - all works. But that jar is shared between all applications on the domain.
    When I tried to place common jar to *%domain%/lib/applibs* and specified --libraries* attribute on deploying I got exception
    java.lang.ClassCastException: a.FirstDao cannot be cast to a.FirstDaoHere http://download.oracle.com/docs/cd/E19879-01/820-4336/6nfqd2b1t/index.html I read:
    If multiple applications or modules refer to the same libraries, classes in those libraries are automatically shared.
    This can reduce the memory footprint and allow sharing of static information.Does it mean that classes should be able to be casted ?

    You didn't specify which version of the application server you are using, but the config is similar as long as you know what to look for. Basically, you need to change the classloader delegation. Here's how it is done in 8.2
    http://download.oracle.com/docs/cd/E19830-01/819-4721/beagb/index.html

  • How can we get ADFSecurity work when used in OC4J, OID and OAM?

    I am getting error in http server log "mod_oc4j: Response status=499 and reason=Oracle SSO, but failed to get mod_osso global context."
    But I am not using Oracle SSO and my client doesn't want to use it either, I am using OAM SSO(CoreIDSSO) in my configuration. Please read the details below.
    I am using ADFSecurity in an app that is protected by OAM. To migrate ADFSecurity permissions from
    system-jazn-data.xml to OID, I used JAZNMigrationTool to populate OID with Grantees and Permissions. OAM gives login page, and authentication works fine.
    But ADFSecurity is not working. ADFComponent Delete button is enabled even for roles that dont have permissions for the iterator delete.
    - The app works fine when I use without OAM. ADF Security permissions work fine.
    - The app works fine when used with OAM, but with ADFSecurity disabled (enforce=false).
    - When I enforce ADFSecurity alongwith OAM, ADFSecurity is not working.
    In the doc "Oracle Containers for J2EE Security Guide b28957", there is a mention of use of CoreIDPrincipal for permissions. Our OID Permissions entries show
    LDAPRealmRole for attribute orcljaznprincipal. I am not sure if this could be the reason.
    We have configured AccessServerSDK for the SOA instance and have policy for the urls in the policy manager. We have entries in orion-application.xml, orion-web.xml and system-jazn-data.xml as per the documentations.
    How can we get ADFSecurity work when used with OID and OAM?

    Have you been able to successfully integrate OAS with OAM & OID? We have similar requriement and so far we have not been able to get it working.
    We have application specific roles which we map to OID roles using orion-application.xml.
    Any pointers to achieve this would be greatly appreciated.
    thanks,
    Dipal

Maybe you are looking for