How to bring a screen

Hi All,
I did bank transfers forms. From F-58 transaction the user selects the form name then all the details of the vendor will be printed on the form. Now my question before printing I should get the bank screen of the vendor, from vendor master XK03. What should I write in the print program to get that screen and further kindly help me on clicking on any of the row in the bank data it should print those bank details on the form this can be contolled by sy-tabix.
Awaiting for your response.
regards,
Ram...

In Firefox 33 the search bar on the about:home page has an autocomplete=off attribute, so you will no longer see search terms that you entered before.
This search bar now show (Google) search suggestions.
You would have to use the search bar on the Navigation Toolbar instead.

Similar Messages

How to bring the screen editable after errror message

Hi All,
I made a little validation in screen in me56 on a fixed vendor in item level.
After which I issued an error message.
I got the error message but the screen remains non-ediatble.
I need to atleast open the field FIXED VENDOR for input for the user to change the value.
Please provide me valuable inputs and this is needed very urgently.
I used the exit EXIT_SAPLMEREQ_008 / Include: zxm02u08.
Thanks in advance.
Krithika

Hi Krithika,
Whenever an error message is being displayed set a flag.
Next time just check if the flag is set before performing any other validation.
If the flag is set then skip the error message and clear the flag, and if the flag is not set then emit the error message.
But the flag should be declared in the global data of the Function POOL.
You can also check if the Function Exit EXIT_SAPLMEREQ_010 suits your requirement. In this there is a parameter called EX_MESSAGES. If you populate the error messages in this parameter the system will automatically handle the change/display mode when an error message is displayed.
Hope this helps in solving your problem.
Regards,
Abhisek.

My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!

My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

How to bring up the screen in mozilla firefox facebook

how to bring up the screen in mozilla firefox facebook
== URL of affected sites ==
http://[email protected]
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.125 Safari/533.4

hi Gryse, in the scenario you've described it is not possible to bring up the remember password dialog again, also firefox won't even have your credentials in memory anymore (your login status on the site is stored in a cookie that the website has set on your computer).
please contact the account settings on the website and see if they offer to change the password or send a reset link to a mail address used to register or else contact the support of the website.

How to bring camera short cut on locked screen

My wife & I have iPhone 4S, recently we both set passcode on our iPhones, my phone shows camera short cut on locked screen whereas my wife's does not has camera short cut. Does any one know how to bring camera short cut on locked screen, thanks.

Yes, hers is updated to iOS 5.1, she can now bring up the camera short cut by tapping Home button twice suggested by anilsudhakaran dated Oct 11 2011 in the support communities. Thanks razmee209 & anilsudhakaran.

How to bring cursor in Table control??

Hi to all
How to bring cursor in Table control when entering into screen
can anyone tell me??? pls explain with example..
thanks
senthil

Hi,
Check the below code
data l_tc_name             like feld-name.
data l_tc_field_name       like feld-name.
get actual tc and column
get cursor field l_tc_field_name
             area l_tc_name.
Regards,
Vind

Phone works great but when on a call proximity sensor kicks in turns off the screen. When I pull the phone away from my head screen is still blank. The force hangup/lock is the only way to bring the screen back on

hi,
phone works great but when on a call proximity sensor kicks in turns off the screen. When I pull the phone away from my head screen is still blank. The force hangup/lock is the only way to bring the screen back on.
I purchaged it before one month onl. So i wont understand how it comes. Please help me. I am waiting for you reply.

"Your face is so ugly, it broke your phone!" Ha ha. Get it? How I was joking there? About your iPhone not working correctly after... <sigh>
But seriously, you said the situation only happens when you have been on a long call, so maybe the iPhone is just autolockng?

How to bring Login.jsp under a html frame ?

hi all.
I have customized the Login.jsp and actually have lot of static content to be displayed in our proposed entry page.
I decided to use Html frames - something like the one below.
When i point on the frame to the Login.jsp ( i referred it as 'amserver/UI/Login') --> it loads all frames then redirects the page to the /amserevr/UI/Login -> the Login.jsp now occupies the entire screen and i c none of the html frames..
any idea how to bring in the portal Login.jsp under a html frame ?
Thanks
Vee
<html>
<frameset noresize="noresize" frameborder=0 rows="25%,70%,5%">
<frame frameborder=0 noresize="noresize" src="/amserver/UI/Login" name="banner_frame" scrolling=no>
<frameset frameborder=0 noresize="noresize" cols="30%,70%">
<frame frameborder=0 src="./images/menus.gif" name="menu_frame" scrolling=no>
<frame frameborder=0 src="./images/content.gif" name="content_frame" scrolling=no>
</frameset>
<frame frameborder=0 src="./images/copyright.gif" name="copyright" scrolling=no>
</frameset>
</html>

is it possible to write jsp code or javascript code inside this Login.jsp ?
I got a bunch of content - menu driven to displayed additional to the identity server login module.
veera

How to bring loan balances in FI

Dear Experts,
We have uploaded employee data (loan, advances etc) in HR but not flowing in FI. How to bring those balances in FI
Can you please suggest me,
Regards,
Rao

Hi,
Personnel numbers are created in HR module of SAP and to supplement the expense related postings we create employee vendors in FI module.
To make this happen we should use the transaction PRAA which automatically copies the HR master data from HR tables and fills it up in the employee vendor master record.
However the program only copies client level data, that is, name address and all.
The company code level data still needs to be updated in the employee vendor master record. This data comes from the reference vendor which you need to mention in the PRAA selection screen.
When you execute the program PRAA for creating employee vendors for the selected Personnel Numbers, the program copies recon accounts, payment terms, house bank etc froom the reference vendor.
For using PRAA transaction, the following details must be filled up in the corresponding HR master record:-
1.) Actions (Infotype 0000)
2.) Organizational Assignment (Infotype 0001)
3.) Personal Data (Infotype 0002)
4.) Permanent Residence (Infotype 0006 Subtype 1)
5.) Bank Details (Infotype 0009 Subtype 0 or 2)
If these are not present, the program will give you an error and tell you what information is actually missing.
Now regarding the number range, you should create a separate account group for employee vendors and assign a number range to it.
If you want the personnel no=vendor number then you will have to make the number range as external and adjust the user exit routing 'SET_VENDOR_NO_BY_USER' (in include RPRAPAEX_001).
Please read the PRAA documentation (which is given in the blue coloured "i" button on the PRAA screen next to execute button).
Using PRAA also helps in cases where exmployee is getting transferred from one company code to another. It gives better control to the system.
You should avoid using FK01 and XK01 for creating employee vendors.
Best of luck,
Nitish

I lost my marginal lines in cs6 how to bring them back?

I am trying to create 3 fild brochure in adobe sc6 but i dont see marginal lines in the main screen. Plz help me how to bring them back.
Thanks

you can go to the view menu and make sure the rulers are visible, then you can click and drag from a ruler to create guide lines and place them where you desire.

How to bring Profit center field in to asset master

HI,
We are having new GL Profit center scenario active. My question is
1.How to bring Profit center field in to Asset Master?
I am not finding the field"Profit Center" under the configurations step Asset Accounting>Intergration with GL Accounting>Additional Account Assignment objects>>Activate Account assignment objects.
I know how to do it if it the Profit center field appears in the above step.HOW TO INCLUDE in the above step??Is there any prior activity I need to do?
2.If I could see the Profit Center field in the above step,then I can add it in T Code ACSET and select the field in Asset Screen Layout,so that it can come up in Asset Master.
If question#1 can be answered it will be great.
thanjs
hinfi

Hi,
Until some years ago Profit Center did not exist in FI-AA master data. The Profit Center was derived from other objects (like the cost center) during posting, but there was no way to enter a Profit Center directly in the asset.
Asset master data has been enhanced with EHP 5 to contain also fields for Profit Center and Segment. To make use of that functionality you need to activate the Business Function for "Segment Reporting" as explained in the Link posted by Jayj before.
Once Business Function "Segment Reporting" is active, you will be able to make ACSET settings for the Profit Center like for the other account assignment objects. Without the Business Function the field does not exist in asset accounting and therefore you cannot find it in customizing.
Regards, Michael

How to bring text field to live

hi everyone here,
Actually I need help in how to bring the textfield in fireworks to live when I putted inside a rectangle. because when I exported to "CSS and Images" I can't see the textfields at all so only the Text and rounded rectangle found that returned back to rectangle but when I sliced the whole rectangle I found that it shows up completely but I can't write inside textfields so which is not effective. Also when I use the "HTML and images" same thing.
I hope anyone can help me to solve this problem and tell me step by step what should I do. Thank you very much for the help
I'm putting my files at this site so you can have a look at it
http://www.4shared.com/file/8DOub3vQ/New.html

AlkingX wrote:
... Actually I'm new to fireworks and I usually use only dreamweaver but now I want to change by using fireworks. ...
Fireworks is not a replacement for Dreamweaver. Dreamweaver is the coding environment; Fireworks is for creating graphics. They are complementary tools. Fireworks can produce HTML (or HTML/CSS), but the purpose of this export ability is for you to create prototypes to show people. The code from FW is not production-quality code. A best-practice scenario would go something like this... Use Fireworks to design your layout. In Fireworks, add slices to export those portions of your layout that will need to be images. Then, move to Dreamweaver and develop the HTML. You can't write HTML and CSS in Fireworks, it isn't made for that, just as Dreamweaver isn't made for image editing.
As for your other question, there is no perfect size for browsers. The question is related to the screen resolution of your target audience. You need to understand your audience: if they're using lower screen resolutions or higher. (For example, I have a 20" widescreen monitor, so my resolution is 1600x1050 pixels. I rarely run browsers at full-screen width, though, because 1600 pixels wide is much wider than most designs.) I usually design for 800 pixels and center that design on a background of some sort. I expect that most users will have a 1024x768 resolution screen or better, and and 800 pixels will fit within a 1024 screen, even with browser borders and scrollbars.
A common way to create a centered design is to use a div for all your content and center that div.

B520 - how to bring down the monitor contrast?

Brightness control in the front panel are not enough.
the backlight is too much for me to handle
Does anyone know how to bring down the contrast even more?
thank you.

I'll clear this up a little...
NVIDIA Controls does not have any control over the lamp / backlight on the screen. You can turn down
the gamma / brightness / contrast, and you may think you see it darker.
YEEEEEEES. it's dark but the intensity of the backlight is still there. You can feel it from miles away.
I chose Lenovo over ASUS just because of the GT555 option, and it was the worst mistake ever.
Asus Et2700 series do have Contrast/Brightness controls for the screen in Values from 0-100.
You can turn the screen completely dark if you want. Asus have never let me down, but thanks to my greed
always wanting more, thought i would never feel complete unless i had the gt555.
This is what happens when you fall for the marketing agenda.
Fortunately, i sold it already. And this would be the last time i'll purchase something from lenovo.
I'd like to think this is something that they just never thought. WRONG!!!. They know. they do it on purpose.
That's their way to make you feel incomplete, so you can start chasing for something else and fall again
in the marketing agenda.
There's always a way to make an "ALMOST PERFECT" product, the worst nightmare for you.
they have done this for years, since the beginning of times.
Let's not forget about the SATA performance issue in H67/P67 chipsets:
http://www.pcstats.com/articleview.cfm?articleID=2589
the B520 is one of the lines affected and lenovo did nothing about it.
And please let's not forget about the Trojan that got infiltrated in the drivers disc
for the B Series Line.
Hopefully, your campany will get a FORMAT C: by the end of this year.
arrivederci.

How to mirror iMac screen wirelessly through a mac mini connected to an hdmi port of HD TV?

I have a new Mac Mini connected to a Sony HD TV. On the same network but in a different room I have my iMac. I can control the iMac with wireless mouse and keyboard from the same room where the TV and Mac Mini reside. I would like to work on my iMac but use the HD TV as my monitor so I can show slideshows and iMovie projects without transferring files to the MacMini first. Is it possible, and if so, how do I go about setting it up?

Your iMac likely supports a higher resolution than the TV does. The maximum standard TVs today use is 1920x1080, and if your iMac is an Intel Core i3 or i5, its own display is at least that high of a resolution. Which model of iMac do you have?
If your iMac is running at least Leopard (10.5), then both machines have Screen Sharing built in. It can be accessed from the Finder, but as often as you would like to use it you should go to Macintosh HD > System > Library > CoreServices and drag it (the icon) to your Dock. That will create the shortcut to get to it easily. As I noted before, the built in Screen Sharing VNC software doesn't do full screen, but third party VNC software can. Both machines do not need to be using the thrid party VNC software, just the one viewing - in this case your Mac mini. Chicken of the VNC is a popular free one, fairly easy to use:
http://sourceforge.net/projects/cotvnc/
For more info about how to set up Screen Sharing and how to use the included application:
http://mac.appstorm.net/how-to/os-x/using-screen-sharing-in-os-x-leopard/
Note that you will have to use the settings in System Preferences, regardless of what VNC software you use. Both systems will need to have Screen Sharing settings enabled.

I use iwires to connect macbook to lg tv to watch netflix.How do I increase screen size on tv.I have tried display options on settings- not working

I use iwires to connect macbook to lg tv to watch netflix.How do you increase screen size on rv.I have tried display settings ,but not working

I would guess that the HDMI port on your mac is for output only - no input, and that's what your'e attempting to do when you attach the mac to your xbox. I looked in Mactracker and it lists the HDMI port as video output for both the 13" Retina MacBook Pro and the 15" Retina MacBook Pro (your post didn't say which one you have), so looks like that is the issue..

How to bring a screen

Similar Messages

Maybe you are looking for