"How to...BSP display comments"...problem with row comment

Hi all,
After implementing as recommended, I noticed that only comment captured at the 'cell' level of detail are returned (via web layouts). Documents captured using the Row' setting are not available via the embedded BSP.
The reason, it seems, is that 'row' comments do not have 0AMOUNT attached to the document properties. The soluion reads all documents with a char and key fig cross section based on a level/package definition, and this may be the problem.
A level/package in BPS0 always needs a key figure (0AMOUNT in my case)....and therefore the "How to.." solution is most likely looking for all documents that have 0AMOUNT, but it is the WIB setting of 'row' that ensures that web-captured documents do not have 0AMOUNT attached.....?
Marc, does this sound correct? Any ideas how to get around the problem without..?
Thanks and regards,
Rael and Natarajan

Hi,
This How-to paper is exactly what I was looking for, so thats perfect. However I'd like to display to row comments as well, but it does not seem to work. As far as I can tell, you haven't updated the white paper yet, Marc. Is that correct? What changes do I exactly need to make it work for row comments as well?
Thanks in advance,
-Jacob
UPDATE!
Ok, I found the place to comment out.
On the tab Event Handler -> OnInitialization - comment out the following line:
ls_cha-chanm = cl_sem_mp_documents=>c_name_keyf.
That seems to do the job.
Thanks again,
-Jacob
Message was edited by: Jacob

Similar Messages

Hello Apple? How do i fixed my problem with my ipad apps every time i open that apps it takes 10min. to play the games ant its getting LOST MODE and the ipad system is crashing

How do i fixed my problem with my ipad apps every time i open that apps it takes 10min. to play the games ant its getting LOST MODE and the ipad system is crashing

We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
Have you tried closing all apps via the iPad's multitasking bar and then doing a soft-reset and seeing that helps ? To close all apps :
iOS 7: double-click the home button to open the taskbar, and then swipe or drag each app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
iOS 6 and below : from the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
Soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

HT5137 I made a purchase with my debit card on The Simpson Tapped out game, And now my game won't open. It just kicks me out every time I click on it. How do I fix this problem with out deleting my app?

I made a purchase with my debit card on The Simpson Tapped out game, And now my game won't open. It just kicks me out every time I click on it. How do I fix this problem with out deleting my app?

Personally, I would never use a debit card online, for security reasons. If your card gets hacked its your money that is stolen. At least with a credit card it is the card providers money that is stolen.
Anyway, I would delete the app and re-install. If you paid for the app in the first place you will be able to re-install free of charge. Also, the app should allow the in-app purchase to happen again as it should recognise that you have already purchased it previously.
Finally, it might be that the 3G doesnt have as much ram as more recent models of iphone and you may have applications running in the background that are preventing the app to function with the in-app purchase unless you shut down any apps eating all you memory that are running in the background. Shut-down these apps (and the simpson tap out app) by exiting to your home screen and double-tapping the home button to show what apps are running in the background. press and hold any of the open apps until it starts shaking. close all the apps down. exit then re-launch the app.
good luck.

Printing problem with Summarize Comments?

Printing problem with Summarize Comments in Pro 10.1.6? When I print, I only get the number boxes on one page and the comments on the next page. The numbered boxes don't show up on the actual image itself.

Um I dont know if im doing something daft but I tried this like you said
PrinterJob printJob = PrinterJob.getPrinterJob();
printJob.setPrintable(this);
if(printJob.printDialog()){
try {
          PageFormat pageFormat = printJob.defaultPage();
          if (pageFormat.getOrientation() == PageFormat.PORTRAIT) {
          landscape = 0;} else {
               landscape = 1;}
          System.out.println("THE ORIENTATION IS "+ landscape);
          printJob.print(); }
catch (Exception PrinterExeption) { PrinterExeption.printStackTrace();}
and it doesnt seem to work as I tried it both as landscape and portrait in the print dialog but landscape is always 0.
cheers
pmiggy

We have version 10.5.8 photoshop CS3 for Mac. How do we fix a problem with photoshop not resizing dpi? For example we resized a 72 dpi image to 200 dpi, when we do a pdf analysis it read as 344 dpi.

We have version 10.5.8 photoshop CS3 for Mac. How do we fix a problem with photoshop not resizing dpi? For example we resized a 72 dpi image to 200 dpi, when we do a pdf analysis it read as 344 dpi.

Sounds like it's a problem with the Acrobat settings. Did you set them to the same resolution?

HT4623 How can i solve installation problem with iOS 6.

How can i solve installation problem with iOS 6. I've tried to install it on my iPhone 4 but nothing turned out. Thanks in advance!!!!

can you connect your device to Tiunes and check to see if there are any files in
OSX: ~/Library/Logs/Crashreporter/Mobiledevice/<Devicename>/
Windows: %appdata%\Apple Computer\Logs\Crashreporter\MobileDevice\<Devicename>
specifically named OTA......
Also for the failed itunes restore please attach the contents of the latest log in
OSX: ~/Library/Logs/<iphone or ipod or ipad> updater logs
Windows: C:/User/ Appdata/Roaming/iTunes/<iphone or ipod or ipad> updater logs

How do I display a JDialog with a JTextArea in it?

Hello.
How do I display a JDialog with a JTextArea in it?

http://java.sun.com/docs/books/tutorial/uiswing/mini/index.html
import javax.swing.*;
import java.awt.*;
public class Test extends JDialog{
     public Test(){
          JPanel contentPane = new JPanel(new BorderLayout());
          JTextArea ta = new JTextArea();
          ta.setText("JDialog with a JTextArea in it");
          setContentPane(contentPane);
          contentPane.add(ta);
          setSize(300,300);
          setVisible(true);
     public static void main(String[] args){
          new Test();
}

How do I resolve a problem with the Pompiere font download?

How do I resolve a problem with the Pompiere font download for Word on a MacPro?

never mind... download must have been corrupt. re-downloading it seems to have fixed the problem.

[svn] 4836: Fix problems with asdoc comments and conditionally compiled definitions.

Revision: 4836
Author: [email protected]
Date: 2009-02-04 11:07:52 -0800 (Wed, 04 Feb 2009)
Log Message:
Fix problems with asdoc comments and conditionally compiled definitions. Fixes bug http://bugs.adobe.com/jira/browse/ASC-3649
Ticket Links:
http://bugs.adobe.com/jira/browse/ASC-3649
Modified Paths:
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/embedding/Compiler.java
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/semantics/ConfigurationEvaluator.java

In the default php.ini is set open_basedir which limits work with php only to few directories (and directories bellow them). There is set /srv/http, /home,/tmp and /usr/share/pear by default.
To allow your vhost you should add /data/www or set empty value.

Problem with posting comments of a specific picture

So I have been able to post the comment in the page I am creating and that comment is also saved in the comment table in the database with the id of the picture but when i am in the first picture and I comment the comments are posted saved in the database with the id 1 and then i go to the second the comments are also posted and saved in the tabel comment with the id of the picture 2. But my problem is that when i go to the second picture i can also see the comments of the first picture. So in all of my pictures I can see comments of pictures with other id. How can i manage to solve this problem. Please suggest me sth
I'll describe a little bit my database
name of database is art
picture tabel I have named piktur(id_piktur,Titulli,Pershkrimi,Piktur_url) rsGallery is picture recordset
the comment tabel I have named komente(id_koment,id_piktur,Tekst)rsKomente is comment recordset
Tekst is the column where the comment is save
I'm using the session variable so i can get the id of the picture from the picture table and insert it in id picture column of the comment tabel
this is the piece of code i guess i should make some conditions but i have tried sth myself but I have not managed to solve my problem. The pictures in my page are organised with paging and repeat region only showing 1 picture at a time. the comment are also repeat region showing all the comments at a time.
<p>
      <?php while ($row_rsKomente = mysql_fetch_assoc($rsKomente)) { ?>
        <?php
$id_piktur=$row_rsGallery['Id_piktur']; $_SESSION['id_piktur']=$id_piktur;
          echo $row_rsKomente['Tekst']."<br/>" ;?>
        <?php } ?>
</p>
my entire code is shown below if you don't think this code is enough for solving the problem gallery.php Thank you in advance
gallery.php
<?php require_once('Connections/art.php'); ?>
<?php session_start() ?>
<?php
if (!function_exists("GetSQLValueString")) {//this is some code i don't shown in here because it has nothing to do with the problem i want to solve}
if ((isset($_POST["MM_insert"])) && ($_POST["MM_insert"] == "form1") &&(isset($_SESSION['id_piktur'])) ) {
$insertSQL = sprintf("INSERT INTO komente (Tekst,id_piktur) VALUES (%s,'".$_SESSION['id_piktur']."')", GetSQLValueString($_POST['tekst'], "text"));
mysql_select_db($database_art, $art);
$Result1 = mysql_query($insertSQL, $art) or die(mysql_error());
$maxRows_rsGallery = 1;
$pageNum_rsGallery = 0;
if (isset($_GET['pageNum_rsGallery'])) {
$pageNum_rsGallery = $_GET['pageNum_rsGallery'];
$startRow_rsGallery = $pageNum_rsGallery * $maxRows_rsGallery;
mysql_select_db($database_art, $art);
$query_rsGallery = "SELECT Pershkrim, Piktur_url, Rankim,id_piktur FROM piktur";
$query_limit_rsGallery = sprintf("%s LIMIT %d, %d", $query_rsGallery, $startRow_rsGallery, $maxRows_rsGallery);
$rsGallery = mysql_query($query_limit_rsGallery, $art) or die(mysql_error());
$row_rsGallery = mysql_fetch_assoc($rsGallery);
if (isset($_GET['totalRows_rsGallery'])) {
$totalRows_rsGallery = $_GET['totalRows_rsGallery'];
} else {
$all_rsGallery = mysql_query($query_rsGallery);
$totalRows_rsGallery = mysql_num_rows($all_rsGallery);
$totalPages_rsGallery = ceil($totalRows_rsGallery/$maxRows_rsGallery)-1;
$maxRows_rsKomente = 10; $pageNum_rsKomente = 0; if (isset($_GET['pageNum_rsKomente'])) {   $pageNum_rsKomente = $_GET['pageNum_rsKomente']; } $startRow_rsKomente = $pageNum_rsKomente * $maxRows_rsKomente;
mysql_select_db($database_art, $art); $query_rsKomente = "SELECT Tekst,id_piktur FROM komente"; $query_limit_rsKomente = sprintf("%s LIMIT %d, %d", $query_rsKomente, $startRow_rsKomente, $maxRows_rsKomente); $rsKomente = mysql_query($query_limit_rsKomente, $art) or die(mysql_error()); $row_rsKomente = mysql_fetch_assoc($rsKomente);   if (isset($_GET['totalRows_rsKomente'])) {   $totalRows_rsKomente = $_GET['totalRows_rsKomente']; } else {   $all_rsKomente = mysql_query($query_rsKomente);   $totalRows_rsKomente = mysql_num_rows($all_rsKomente); } $totalPages_rsKomente = ceil($totalRows_rsKomente/$maxRows_rsKomente)-1;
$queryString_rsGallery = "";
if (!empty($_SERVER['QUERY_STRING'])) {
$params = explode("&", $_SERVER['QUERY_STRING']);
$newParams = array();
foreach ($params as $param) {
    if (stristr($param, "pageNum_rsGallery") == false &&
        stristr($param, "totalRows_rsGallery") == false) {
      array_push($newParams, $param);
if (count($newParams) != 0) {
    $queryString_rsGallery = "&" . htmlentities(implode("&", $newParams));
$queryString_rsGallery = sprintf("&totalRows_rsGallery=%d%s", $totalRows_rsGallery, $queryString_rsGallery);
$queryString_rsKomente = "";
if (!empty($_SERVER['QUERY_STRING'])) {
$params = explode("&", $_SERVER['QUERY_STRING']);
$newParams = array();
foreach ($params as $param) {
    if (stristr($param, "pageNum_rsKomente") == false &&
        stristr($param, "totalRows_rsKomente") == false) {
      array_push($newParams, $param);
if (count($newParams) != 0) {
    $queryString_rsKomente = "&" . htmlentities(implode("&", $newParams));
$queryString_rsKomente = sprintf("&totalRows_rsKomente=%d%s", $totalRows_rsKomente, $queryString_rsKomente);
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Paintings</title>
<link href="style_gallery.css" rel="stylesheet" type="text/css" />
</head>
<body>
</div>
<div id="logo_wrapper">

<div id="logo"><img src="_images/logo.png" width="600" height="79" align="right" /></div>
</div>
<div id="main_container">
<div id="menu_container">
<div id="menu">
<ul id="base_menu" >
<li><a href="index.php">Home</a></li>
<li><a href="#">About</a></li>
<li><a href="gallery.php">Gallery</a></li>
<ul class="sub_menu">
<li><a href="#" title="Charcoal" >Charcoal </a></li>
        <li><a href="#" title="Oil paintings" >Oil paintings</a></li>
        <li><a href="#" title="Sketches" >Sketches </a></li>
        <li><a href="#" title="Our latest podcast" >Video Podcast</a></li>
</ul>
<li><a href="#">Contact </a></li>
<li><a href="#">Events</a></li>
<li><a href="login.php">Log in</a></li>
</ul>
</div>
</div>
<div id="mainArticle">
    <h1>Painting Gallery</h1>
      <p>Welcome !</p>
    <p>
      <?php do{ ?>
   <?php   $id_piktur=$row_rsGallery['id_piktur']; $_SESSION['id_piktur']=$id_piktur;             echo $row_rsKomente['Tekst']."<br/>" ;                      ?>         <?php } while ($row_rsKomente = mysql_fetch_assoc($rsKomente)); ?> </p>
      <form id="form1" name="form1" method="POST" action="<?php echo $editFormAction; ?>">
        <p>
          <label for="comment">Comment : </label>
        </p>
        <p>
          <textarea name="tekst" id="tekst" cols="45" rows="5"></textarea>
        </p>
        <input name="comment" type="submit" value="Comment" />
        <input type="hidden" name="MM_insert" value="form1" />
      </form>
      <p> </p>
      <p>
        <a href="<?php printf("%s?pageNum_rsGallery=%d%s", $currentPage, 0, $queryString_rsGallery); ?>">First</a>
        <a href="<?php printf("%s?pageNum_rsGallery=%d%s", $currentPage, max(0, $pageNum_rsGallery - 1), $queryString_rsGallery); ?>">Previous</a>
        <a href="<?php printf("%s?pageNum_rsGallery=%d%s", $currentPage, min($totalPages_rsGallery, $pageNum_rsGallery + 1), $queryString_rsGallery); ?>">Next</a>
        <a href="<?php printf("%s?pageNum_rsGallery=%d%s", $currentPage, $totalPages_rsGallery, $queryString_rsGallery); ?>">Last</a>
<p class="galleryText"><img src="_images/<?php echo $row_rsGallery['Piktur_url']; ?>" alt="golden gate bridge" class="galleryImage" />    <?php do { ?>     <?php echo $row_rsGallery['Pershkrim']; ?>     <?php } while ($row_rsGallery = mysql_fetch_assoc($rsGallery)); ?> </p>
</div>
<p> </p>
</div>
</body>
</html>
<?php
mysql_free_result($rsGallery);
mysql_free_result($rsKomente);
?>

>thnx yeah i fixed the problem this time i understood you.
Glad you got it working.
>you confused me the first time with the explanation because you mentioned loops
Yeah. Normally with a repeating region you would need to use nested loops; an outer loop for the picture and an inner loop for the related comments. During each iteration of the outer loop you would execute the sql to retrieve the inner loop recordset. However, since you are using paging with only one recordset per page, the comment recordset SQL does not have to execute inside the picture loop. Hope that makes sense.

How can I print a text with my comments in Pages 5.0?

I have made comments on a text in Pages 5.0. How can I now print the file and have my comments included in the hardcopy?

I have found a round-about solution to my own problem: with the file open, click file, export the file back into an earlier version of Pages, save the new file and then print it, but there has to be a better solution from within the new version of Pages.

How can I fix this problem with exporting Pages files?

Hello,
I'm having problems with exporting Pages files to Word or PDF (I haven't tried the other formats). Whenever I try to export the Page file, I get one message like this: "The document "XXXXXXX" could not be exported as "YYYYYYY". This problem started after the last Pages update, before that it was working fine. I restarted the computer, updated the OS, but the problem hasn't been solved.
Does anyone know how to fix this problem?
Thank you in advance!
Best regards,
Filipe

Computers are made of parts made by humans and assembled by humans of materials that are not perfect.
For example, a display cable that was accidentally pinched during assembly would pass quality control testing with flying colors and would not fail until the lid had been opened and closed several times.
Likewise a display might not fail until powered on and off a few hundred times.

How to sign in? (problem with username and/or password)

I created an account long ago for the Support Communities with an Apple ID: xxx.mac.com.
I created an account not so long ago for iTunes with an Apple ID: xxx.gmail.com.
Where they suppost to be the same? Wasn't sure. In any event, I've been using them both without a hitch. Then I realized that I could have a password recovery problem with my Support Communities account because I haven't had the xxx.mac.com email address for several years now.
Problem: When I use my older Apple ID for Support Communities, it will not allow me to change my email to my current xxx.gmail.com address. I suspect it recognizes the address is already being used with me newer Apple ID for iTunes. My solution was to simply ditch the older ID and try signing in with my newer ID. Unfortunately with that route, I get:
"We're sorry. Your account could not be created due to system issues. Please contact Apple Support Communities with the information below to create your account." [Which I've done, but no response.]
Questions: Are the ID support to be the same or different? Either way, it doesn't really matter to me, but I either need to update my address for the older ID or be able to use my newer ID in Support Communities. Because of this, I'm unable to use any type of email notification and I'm afraid I could have a problem with password recovery if I were in that position.
Thanks for any comments.

Problem solved and completely my error.
My login with the old Apple Discussions was [email protected] At some point, with the new Apple Support Communities, some time ago, I was prombed to create a new account and I did so. My username was simply "xxx" without the "@mac.com".
So that was the problem. My old [email protected] still had my old address. I kept logging in with this ID and kept trying to update my address. Where I thought it was recognizing that this address was already used with my iTunes account, it was because it was used with my newer Support Communities ID (xxx) that I didn't even remember I had created.
Turned out it was something so simple. (I hate when that happens.) I had to play my "idiot card".
Thanks to Apple support for the direct email correspondence that finally got me on the right track.

How do I know if I have a wifi problem with my new iPad 3 (it seems very slow) and how does one address the problem with apple if there is one?

I just read about the possible issue that some folks are having with their new iPad wifi (my seemed to be running very slowly but I thought that perhaps it was just me overreacting). How do I know if I have a definite problem, and what is my recourse? Do I need to take it to an Apple store for testing? I have apple care which I assume addresses stuff like this. Thoughts? Thx so much.

Your iPad is covered by the normal warranty for one year. If you have AppleCare that extends the coverage. If you feel there is a problem with your wifi reception visit an Apple store with your iPad for a consultation. Be sure to make an appointment before you go.

Facing "Display Flickering" problem with my 15" macbook pro(A1286)while swapping the desktops and closing the tabs.....need help...reply soon

Suggest Solution for this Display Flickering problem ....

Hi, I read the post about calibration and I probably do that a little too often TBH! As I get so little time out the battery and mainly use my MBP on my lap, usually with the power supply near by, it gets charged to full, run to empty to the point of sleep, or sometimes it even cuts out and then is recharged to full again, so I really think it's new battery time. I've seen non Apple Official ones for between £35 and £65 that have 3 year warranties and state they are around 5200mh but am unsure due to reviews.
Later...
Anyway's I have now ordered a non Apple replacement from Amazon for about £35 and it has several good reviews and 4.5 out of 5 stars so I'll see if it works and report back. If it doesn't I'll send it back and get the Official Apple one.
Message was edited by: Missy Steph

"How to...BSP display comments"...problem with row comment

Similar Messages

Maybe you are looking for