How to build a measurement system using NI products and the system is outside PC

I would like to build a system that uses NI's following products:
1. Wave form generator
2. Switches
3. A/D board
My question is: How to build such a system such that
the system is outside PC? For example, the system is
like an ordinary instrument that can be connected to
PC through RS 485 port.
Thanks!

If you are planning on using SCXI, you have two options. You can still use the PXI-1000B chassis, and you will need to connect your DAQ board to the SCXI system with a cable.
You can also consider using a PXI-1010 or PXI-1011 chassis. We call them combo chassis because they come with some PXI slots and they have an SCXI chassis attached to them. In this chassis, you can connect your DAQ board in the PXI slot closest to the SCXI chassis, and the DAQ board will communicate with the SCXI chassis through the internal PXI backplane, so you will not need to connect them through a cable. The PXI-1010 chassis has 8 PXI slots and 4 SCXI slots, and the PXI-1011 chassis has 4 PXI slots and 8 SCXI slots.
The MXI-3 extender will let you control any PXI chas
sis from a desktop. Keep in mind that there are two interfaces: the PCI-PXI-8330, which uses a copper cable, and the PCI-PXI-8335, which uses a fiber optics cable. The advantage of the fiber optics cable is that it is less likely to have noise and the PXI chassis can be up to 200 meters away from the computer.
Now, given that your signals have a 150V amplitud, you will need a SCXI-1127 module instead of a PXI-250x.
Finally, we do not have an amplifier in PXI form that can read a 50 KHz - 300 KHz and peak voltage 5v, and amplify it to 120v. However you could check other PXI vendors for those boards. You can find some information of third party vendors by going to the NI Developer Zone and clicking on the Third Party Product Advisor link on the left.
Hope this helps,
Claudia Lorente
Applications Engineer
National Instruments

Similar Messages

How to decide which adapter to use from IDOC and RFC?

Hi All,
When interating XI with an SAP system,
How to decide which adapter to use from IDOC and RFC?
Thanks.

Hi,
you can also consider to use ABAP Proxy if you are working with Systems based on SAP Web AS 6.40.
Here some useful links:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/02/265c3cf311070ae10000000a114084/content.htm">ABAP Proxy Runtime</a>
ABAP Proxies in XI(Client Proxy)
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
ABAP Server Proxies
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
How do you activate ABAP Proxies?
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
XI: Reliable Messaging EOIO in ABAP Proxies
/people/arulraja.ma/blog/2006/08/18/xi-reliable-messaging-150-eoio-in-abap-proxies
More links for proxy:
proxies and performance...
Hope this help
Francesco

How to build FM radio receiver on PXI 5600 and PXI 5142 with help of labview

How to build FM radio receiver on PXI 5600 and PXI 5142 with help of labview?
PLZ TELL ME!
Solved!
Go to Solution.

Dude,
Your way of asking questions sucks!
- Do not use such fonts!
- Try to find things out yourself first (apparently GovBob was able to find info, so could you)
- Have you asked GovBob if he likes it that you mail him for more questions?
You ask for a complete solution on a project YOU have to do. (you dont learn of it if you dont try it yourself first)
Hopefully you will ask questions in a less DEMANDING way next time.
Good luck with your project

How do i use my iMac and the macs wired internet connection to share the internet with my iPod and iPhone

How do i use my iMac and the macs wired internet connection to share the internet with my iPod and iPhone. For 6months I had set up a network that shared the internet through bluetooth to my iPod 5th gen but i messed it up when i tried to add my iPhone 5s and i can't remember how to do it.

The following has instructions: OS X Mavericks: Share your Internet connection

How can I import all my gmail contacts into iPad? I use iPad mini and the solutions available on the web are not compatible.

How can I import all my gmail contacts into iPad? I use iPad mini and the solutions available on the web are not compatible.

Hello and thanks for the answer.
I meant by "not compatible" that all the solutions that I found on the web did not work, especially the "Microsoft exchange" one.
Fortunately I found on the comments of the first website you mentioned the right answer for me, which I copy below:
Tap Settings > Mail, Contacts, Calendars > Add Account > Other > Add CardDav Account.
Enter the following information in the fields:
Server: google.com
User Name: Enter your full Google email address
Password: Your Google account password
Select Next at the top of the screen to complete the setup.
After you have completed the setup, open the Contacts app on your device. Syncing should begin automatically.
Additional Information
Note: Make sure that SSL is enabled (under Advanced settings), and that the port is 443.
If you are using application based special password go to https://accounts.google.com/Se... and instead of your password put that special code and u r done.

How to get STPOV structure values using BOM number and Plant number

hello All,
could you please help me out
'How to get STPOV structure values using BOM number and Plant number'
is there any function module where can i give input as bom and plant number .
waiting for your response.
regards
srinivas

I did a quick where-used lookup in SE11 on the structure STPOV in function module interfaces and came up with the following:
Function Module                             Short Description
CK_F_TOTALCOST_COMPUTE
CS_ALT_SELECT_COUPLED_PRODUCT
CS_WHERE_USED_CLA                Bills of material; class use
CS_WHERE_USED_CLA_ANY        Bills of material; direct class use or via other class
CS_WHERE_USED_CLA_VIA_CLA        Bills of material; class use via classes
CS_WHERE_USED_COP
CS_WHERE_USED_DOC                Bills of material; document use
CS_WHERE_USED_DOC_ANY:Bills of material; direct and (indirectly) document use via
CS_WHERE_USED_DOC_VIA_CLA        Bills of material; document use via classes
CS_WHERE_USED_KNO                Bills of material; use object dependency
CS_WHERE_USED_MAT                Bills of material; where-used list
CS_WHERE_USED_MAT_ANY:Bills of material; where-used list as article or class item
CS_WHERE_USED_MAT_VIA_CLA        Bills of material; where-used list via classes
EXIT_SAPMC29M_001                BOM; Article Where-Used List
It appears that this structure is primarily used for where-used look-ups for components within the BOM. I don't know if any of these are what you're in need of.
Hope this helps,
Mark Schwendinger

In LR6CC, after using the merge to HDR and the photo returns to LR as a DRG, it is not automatically put into a previously set up stack. For example a stack of three photos. If I use NIK HDR and the photo returns to LR, the stack is automatically changed

In LR6CC, after using the merge to HDR and the photo returns to LR as a DRG, it is not automatically put into a previously set up stack. For example a stack of three photos. If I use NIK HDR and the photo returns to LR, the stack is automatically changed from 3 to 4. When LR's HDR merge brings a photo back into LR's library, the stack number does not change and the DRG version isn't included in the stack.

Hi,
The Ps CS6 public beta version contains the same camera support as found in Ps CS5/5.5 compatible CR 6.6. There will be future updates to CR 7 for Ps CS6 to pick up more camera support. The Nikon D800 NEF files are not supported, yet.
If you like to work with your D800 files in the public beta build now, you'll have to get the DNG Converter 6.7 from here: http://labs.adobe.com/technologies/cameraraw6-7/
and convert your files to DNG.
regards,
steve

Problem using Change production and SFC step status with Simultanious group

Hello,
We just upgraded to ME 5.2 SP5 patch which was released two days back, the problem with Simultanious group is fixed and SFC gets the correct next step as per defined in the router (Previously there was bug).
But when we try to use change production and put SFC in simultanious router at some particular operation as que it is getting in que at all operations and really can be started and completed even at the last operation.
Same is the case with step status if we put it in que at some intermediate operation all operation listed above are becoming in que irrespective of the flow defined in simultanious router.
Please let me know how to handle this.
Regards,
Pushkar Patil

Hi Pushkar,
It seems to be a bug. I would suggest opening a ticket on this.
Regards,
Alex.

HT4623 My camera just recently went blurry. It was working just fine yesterday but then I went to use it today and the pictures are so fuzzy. Has anyone else had this problem with their iPhone 5?

My camera just recently went blurry. It was working just fine yesterday but then I went to use it today and the pictures are so fuzzy. Has anyone else had this problem with their iPhone 5?

1st... make sure nothing's covering/smudging the camera lens. then...
Standard troubleshooting...
Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
Remove the Camera app from Recently Used list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Tap and hold any icon in this list until they wiggle
- Press the red to delete the Camera app from this list.
- Press the home button twice when done.
- Restart the Camera app
If still a problem restore with your backup.
If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
If still a problem, it's likely a hardware issue.

I have an older macbook pro and the hard drive is starting to go (making loud noises). i tried to back up to an external hard drive (my passport essential se) using time machine and the computer keeps shutting down. suggestions to complete backup please?

I have an older macbook pro and the hard drive is starting to go (making loud noises). i tried to back up to an external hard drive (my passport essential se) using time machine and the computer keeps shutting down. the same thing happens when just trying to save my pictures from iphoto to a flash drive. suggestions to complete backup please?

Sounds like you'll need to access that drive while it is not booted. You need to replace it anyway, so do that, then one way or another (ext enclusure, et), access it and copy files.
If you keep trying to boot it, you might kill it for good and not get your files, so just swap it out first.

I have purchased Wedding Style By Miracle Design - it is showing in the downloads but I can not get it into lightroom - I am using a mac and the instructions are for windows.

I have purchased Wedding Style By Miracle Design - it is showing in the downloads but I can not get it into lightroom - I am using a mac and the instructions are for windows.

Return, cancel, or exchange an Adobe order

How do i fix my wifi if it connects and the bars are blue but no check sign appears next to the wifi name and does not connect to the internet???

How do i fix my wifi if it connects and the bars are blue but no check sign appears next to the wifi name and does not connect to the internet???

Did you already try to reset the iPod by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data.
If this does not work, try to reset the network settings in Settings/General/Reset. After that you'll have to put in the passwords for all known networks again.
More troubleshooting can be found here:
iOS: Troubleshooting Wi-Fi networks and connections

Since my last firefox update, I have been unable to type an email - the text box does not appear when I press 'reply' , or press 'compose'. The email provider is '123-reg.co.uk. I have been using both firefox and the provider ['webfusion Ltd/webmail123] s

Hello. Since my last firefox update, I have been unable to type an email - the box within which one would usually type does not appear when I press 'reply' to a received email, or press 'compose'. The email provider is '123-reg.co.uk. I have been using both firefox and the provider ['webfusion Ltd/webmail123] successfully for well over a year. The provider says it is a browser problem. I can still add an attachment to the email header, which successfully can be sent, but the recipient gets my standard email 'signature' with font messages and the attachment. Can anyone help? My email addresses are [email protected] [this is the one with the issue] and [email protected] in English
== today

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

How do I find my old keys, if I didnt register products,and the bar code is all thats left from school purchase?

How do I find my old Keys, If I didnt register products, and the bar code is all thats left from school?

Well, then you are SOL.
Mylenium

How i can wacht video clips in my mac and the tv at the same time trough the apple tv

how i can wacht video clips in my mac and the tv at the same time trough the apple tv

Welcome to the Apple Community.
Unfortunately you can't do that.

How to build a measurement system using NI products and the system is outside PC

Similar Messages

Maybe you are looking for