How to cal WSDL from Custom Module?

Hi Experts,
      How to WSDL from Custom Module.Is it possible to cal WSDL through http call?
Regards,
Rajesh.D
Edited by: Rajesh Kumar on Sep 17, 2008 8:17 AM

>>How to WSDL from Custom Module
Plz rephrase your query
>>Is it possible to cal WSDL through http call?
why you need to call WSDL using HTTP?  Did you mean to consume webservice using http call?
Thanks
Farooq

Similar Messages

  • How to extract data from custom made Idoc that is not sent

    Hi experts,
    Could you please advise if there is a way how to extract data from custom made idoc (it collects a lot of data from different SAP tables)? Please note that this idoc is not sent as target system is not fully maintained.
    As by now, we would like to verify - what data is extracted now.
    Any help, would be appreciated!

    Hi,
    The fields that are given for each segment have their length given in EDSAPPL table. How you have to map is explained in below example.
    Suppose for segment1, EDSAPPL has 3 fields so below are entries
    SEGMENT          FIELDNAME           LENGTH
    SEGMENT1         FIELD1                   4
    SEGMENT1         FIELD2                   2
    SEGMENT1         FIELD3                   2
    Data in EDID4 would be as follows
    IDOC           SEGMENT                          APPLICATION DATA
    12345         SEGMENT1                        XYZ R Y
    When you are extracting data from these tables into your internal table, mapping has to be as follows:
    FIELD1 = APPLICATIONDATA+0(4)        to read first 4 characters of this field, because the first 4 characters in this field would belong to FIELD1
    Similarly,
    FIELD2 = APPLICATIONDATA+4(2).
    FIELD3 = APPLICATIONDATA+6(2).  
    FIELD1 would have XYZ, FIELD2 = R, FIELD3 = Y
    This would remain true in all cases. So all you need to do is identify which fields you want to extract, and simply code as above to extract the data from this table.
    Hope this was helpful in explaining how to derive the data.

  • How to consume WSDL from SR in PI 7.1

    Hi,
      How to publish WSDL into SR. How to consume WSDL from SR. Can anybody guide me step by step.
    Thanks & Regards,
    Venkat K

    Hi venkat,
    Check out the blog : /people/daniel.graversen/blog/2008/02/27/publish-services-from-pi-71-to-the-service-registry
    also : https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0f3cf81-e6da-2a10-6891-ef321fdc1a6b
    Thanks,
    Pooja Pandey
    Edited by: Pooja Pandey on Jan 27, 2009 10:26 AM

  • How to get username from customer email id.

    Hi experts,
    How to get username from customer email id.I am using transaction XD02.
    I would be thankful for your kind replies .
    Regards,
    Sachin Hada

    Hi sachin,
    Re: Email id field
    Regards,
    Sravanthi

  • How to Consume WSDL FROM PeopleSoft to SAP

    How to Consume WSDL FROM PeopleSoft to SAP
    Points will be rewarded
    thank you,
    Regards,
    Jagrut BharatKumar Shukla,

    HI
    Please refer to the following links
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d5d4a6e3-0601-0010-6aa9-ac3a1f747ea5
    http://www.mindtelligent.com/pdf/details.ppt
    http://www.bea.com/content/news_events/white_papers/BEA_WL_Adapters_ds.pdf
    http://www.oracle.com/technology/products/applications/Events/OOW-2005/S3534_Doron_Avizov.pdf
    http://download.microsoft.com/download/8/9/5/89585721-4774-4b5e-856b-c9db5d2980b3/Application%20Integration%20Fact%20Sheet.pdf
    Regards
    Ravish Garg
    <i>
    Reward if useful</i>

  • IDOC :: how to send data from Custom Infotype in SAP HR to third party

    Hi,
    I have created one custom Infotype by number 9020. How to send data from this infotype to third party system and also change pointers need to trigger for this infotype.
    Please help me in doing it.
    I am using one Custom Message type ZTALENT and Custom Idoc Type ZTALENT.
                                                                                    ZTALENT                        Talent Management                                                                               
    5  E1PLOGI                        Header for an HR Object (Master Data or Organizational Data)                                                                               
    5  E1PITYP                        HR: Transported Infotypes and Subtypes for an Object                                                                               
    ZPUSER                         User base Data File                                          
                    ZPERSON                        Personal Information File Segment                            
                    ZPOST                          Position File                                                
                    ZOPE                           Overall Performance                                          
                    ZPWORK                         Outside Work Experience                                      
                    ZPEDUC                         Education Details of Employee                                
                    E1P0000                        HR: HR Master Record Infotype 0000 (Actions)                 
                    E1P0001                        HR: HR Master Record Infotype 0001 (Org. Assignment)         
                    E1P0002                        HR: HR Master Record Infotype 0002 (Personal Data)           
                    E1P0016                        HR Master Record: Infotype 0016 (Contract Elements)          
                    E1P0022                        HR Master Record: Infotype 0022 (Education)                  
                    E1P0023                        HR Master Record: Infotype 0023 (Other/Previous Employers)   
                    E1P0041                        HR Master Record: Infotype 0041 (Date Specifications)        
                    E1P0105                        HR: HR Master Record Infotype 0105 (Communications)       
                   ZE1P9020
                    ZPLANG                         Language Details                                             
                    ZACTION                        Actions Changes            
    Regards,
    Krishna

    Hello Shankar,
             Technically TEMSE files are read by calling the following 3 function modules in sequence,
                  1) RSTS_OPEN_RLC or RP_TS_OPEN: open the temse object
                  2) RSTS_READ : read the object
                  3) RSTS_CLOSE: close the object
    Regards,
    Rajesh

  • How to Migrate WSDLs from one environment to other

    Hi All,
    can somebody please tell me how can WSDLs from one environment be migrated to other environments.
    I could not see any option in CMU.
    Do i need to create them Manually in every environment.
    many thanks,
    sapan

    As I recall, you can manually move the file data/soap/custom/wsdl_custom.hda from the instance folder on one system to the other. Then, manually choose the option to publish the WSDLs from the WSDL generator tool in admin interface. Not automatic in any way (well, the publishing is kind of automatic) but certainly better than manually re-entering the WSDL definition.
    Note that this will not do if you need to merge WSDLs from the first system to the second system. By moving the HDA file you will be replacing all custom WSDL definitions on the second system with those from the first.
    Jon-Eric Eliker, Vision Marshal
    Frontline Logic, Inc.
    http://www.frontlinelogic.com

  • Where  to Store the value from custom Module?

    Hi Experts,
                   I am having Custom Module for altering the payload .From that payload I need to store a particular value.where can i store that that vlaue ?.Custome module is inOutBound.
    Regards,
    Rajesh.D
    Edited by: Rajesh Kumar on Sep 18, 2008 1:13 PM

    Hi Bhavesh,
                My scenario is Idoc to WebService.In custom module i had called webservice through http call it had returned connection id.Payload is passed with connectionID to Web Service for calling other methods.Next i have to close the connection with Same Conncetion ID in another Custome module.so i have to store some where and reterive in my module.pls help
    Regards,
    Rajesh.D

  • Triggering Workflow from Custom Module pool

    Hi,
    I am trying to trigger my workflow from my custom module pool using the function module "SAP_WAPI_START_WORKFLOW". I am passing the following parameters for the above function module
    TASK, LANGUAGE, DO_COMMIT, USER and INPUT_CONTAINER
    but, it is returning the following message
    "You are not one of the possible agents of task 'WS90100020'"
    Please suggest a solution for this problem?
    Regards
    Sujith P. Soman

    Hi,
    A better way would be to trigger your WF using an event and calling SAP_WAPI_CREATE_EVENT. But if you want to start it directly then if you are calling this FM in dialog you need to be a possible agent. The easiest is if you jsut make it a general task so anyone can start it.
    In PFTC, open your WF goto Additional Data -> Agent assignment -> Maintain. Click on 'Attribnutes' and select 'General Task'.
    Also run SWU_OBUF afterwards to synch all buffers before testing your FM again.
    Cheers,
    Mike

  • How to manipulate records inside customized modules and reflect to the seeded modules

    If we are going to add custom modules inside Oracle EBS that link to Receivables, how do we create/update/delete records inside those custom modules and make them reflect inside Receivables? Are we going to use also the Interface tables and standard APIs? Can anyone help me on this matter or point me to some reading materials.  Actually, I already started reading Oracle Applications Developer's Guide which gave great knowledge on how to start this task.
    Thanks in advance.

    Jon632 wrote:
    If we are going to add custom modules inside Oracle EBS that link to Receivables, how do we create/update/delete records inside those custom modules and make them reflect inside Receivables? Are we going to use also the Interface tables and standard APIs? Can anyone help me on this matter or point me to some reading materials.  Actually, I already started reading Oracle Applications Developer's Guide which gave great knowledge on how to start this task.
    Thanks in advance.
    You can use interface table, or APIs or both.
    All APIs are documented in eTRM website -- http://etrm.oracle.com
    Oracle Receivables: Receipts API Overview, Setup, Sample Scripts and Troubleshooting (Doc ID 1361075.1)
    Oracle Receivables Invoice API: Setup and Sample Scripts (Doc ID 1242202.1)
    Oracle Receivables: Receipts API Known Issues and Patches (Doc ID 1362066.1)
    Oracle Receivables Credit Memo API: Setup and Sample Scripts (Doc ID 1272600.1)
    Oracle Receivables Invoice API: Known Issues and Patches (Doc ID 1306471.1)
    Oracle Receivables: Transactions API Overview (Doc ID 1240573.1)
    Oracle Receivables Credit Memo API: Known Issues and Patches (Doc ID 1316475.1)
    Oracle Receivables Adjustments API: Overview, Sample Scripts, Known Issues (Doc ID 808758.1)
    Oracle Receivables Deposits API: Sample Scripts, Known Issues/Patches (Doc ID 266964.1)
    How to Register a Receivables Application Programming Interface (API) as a Concurrent Request (Doc ID 785369.1)
    Thanks,
    Hussein

  • How to create webservice from function module

    Hello,
    I'm trying to create webservice from function module from. I choose Utilities/More Utilities/Create Webservice/..From function Module. What data should I enter in section "Enter Package/Request" ?
    When I check "Local object" checkbox I get a message "Test objects cannot be created in foreign namespaces"
    Is there any doc about this procedure (web service creation) with description of all sections ?
    thanks for any reply,
    Lukasz Ferenc

    Hi,
    Which SAP product of wich release of which SP are you using ?
    The procedure is documented in help.sap.com and in blogs and SDN forum messages.
    It means that the use of the SEARCH button should give plenty of answers...
    >When I check "Local object" checkbox I get a message "Test objects cannot be created in foreign >namespaces"
    As usual, begin your choosen name with an "Z".
    Regards,
    Olivier

  • How to cal selection screen in module pool

    Hi abapers,
    I have to use selection screen in module pool programme..How to call selection screen in module pool.
    Regards,
    ramya

    YOU HAVE TO DEFINE YOUR SELECTION SCREEN LIKE THIS
    SELECTION-SCREEN BEGIN OF SCREEN 123 AS WINDOW TITLE TEXT-456.
      SELECTION-SCREEN BEGIN OF BLOCK BL1 WITH FRAME TITLE TEXT-BL1
                                          NO INTERVALS.
        SELECT-OPTIONS SEL1 FOR SY-SUBRC.
        PARAMETERS     PAR1 LIKE SPFLI-CARRID.
        SELECTION-SCREEN COMMENT /10(20) TEXT-COM.
      SELECTION-SCREEN END OF BLOCK BL1.
    SELECTION-SCREEN END OF SCREEN 123.
    SELECTION-SCREEN ULINE.
    SELECTION-SCREEN BEGIN OF SCREEN 99.
      SELECTION-SCREEN PUSHBUTTON 15(25) PUBU
                       USER-COMMAND US01.
      SELECT-OPTIONS SEL2 FOR SPFLI_WA-CONNID.
      PARAMETERS     PAR2 TYPE I.
    SELECTION-SCREEN END OF SCREEN 99.
    THEN YOU HAVE TO CALL THAT
    CALL SELECTION-SCREEN scr.
    AFTER THAT YOU CAN CALL THE ANOTHER SCREEN..
    CALL SCREEN..
    REGARDS
    SHIBA DUTTA

  • How to generate WSDL from XML Schema?

    What are reasonable strategies, both direct and indirect, to generate a WSDL from
    an XML Schema describing our messages? I'd prefer a more direct route, but I'd
    like to understand the various choices. We're currently using WLP8.1SP2.

    Hi David,
    There is a "start from schema" example that Manoj built [1] that could
    be a good choice for determining your development path.
    HTH,
    Bruce
    [1]
    http://manojc.com/?sample43
    David Karr wrote:
    >
    What are reasonable strategies, both direct and indirect, to generate a WSDL from
    an XML Schema describing our messages? I'd prefer a more direct route, but I'd
    like to understand the various choices. We're currently using WLP8.1SP2.

  • How to Retrieve Messages from Function Module 'CM_F_MESSAGE'

    I have a custom program that first calls function module CM_F_INITIALIZE to make sure that pop-ups are not displayed on screen. This program then performs a subroutine that also calls function CM_F_MESSAGE. How do I retrieve the messages so I can output it as 1 big list on screen?
    Thanks in advance!

    The subroutine calls the function CM_F_MESSAGE to display message.
    you can declare one internal table in your program and populate the message details in this internal table.
    At the end while displaying data, display the content of this internal table as messages populated during the process.

  • How to get data from function module in crystal report

    Hi,
    I installed Crystal Reports 2008 and BO SAP Integration kit for CR.
    I connected successfully to SAP system from CR but unable to get the data into Report ...
    But data is present in function module.
    Could you please tell me what may be the reason ...!!
    Thanks
    Raghavendra

    Hi,
    I connected successfully to SAP system from CR but unable to get the data into Report with all the Input parameters and data is present in function module.
    Note: - If we take Start date as input parameter in Crystal report data is coming for single parameter, whereas we take input parameters like Partner function, Region and Customer - we are not getting data. (These fields we created parameters in Crystal report)
    In Function Module IMPORT Parameters are below mentioned and Export parameter is Blank
                                                                                    Start Date (Mandatory field)
                                                                                    Partner Function (Mandatory)
                                                                                    Region
                                                                                    Customer
    Please let us know if required any information.
    Regards,
    Raghavendra

Maybe you are looking for

  • How to install the EUL5 Business Area and seeded reports for Ora Apps 11i

    Hi All, We have to install the EUL5 Business Area and seeded reports for Ora Apps 11i. I think there are scripts which need to be executed to create the BA and the Disco seeded reports. I am kind of confused about the whole think. Any pointers as to

  • How can I capture video directly into FCP without recording to tape first?

    I hooked my Sony VX2000 to the computer via firewire and opened the Log and Capture dialog box. The video from my camera shows correctly in the preview window. I click the Capture Now button and the capture window opens but no video displayed. The me

  • Connectivity from AS2 to File adapter

    Hi, I have been trying to setup a inbound connection via AS2 (AS2->File adapter). I will be receiving EDI files which would be splitted by using SPLIT 997 adapter and after transaltion will be passed to a file receiver. I am facing some problems in t

  • Help with registering VB ActiveX EXE

    I have an ActiveX EXE that I've compiled and used on 2 of the 3 TS 3.1 systems here. We updated all the files from SourceSafe to pull in all the changes, on the 3rd system and found that the "TestListForm.EXE" wasn't registered on that system (WinXP)

  • I acheived Multiple Inheritence in JAVA !!!!!!!!

    Hi, Im in ob_imit2_a2 group. I can use member variables and methods of two(or more) classes in another class without importing them just like Multiple Inheritence in C++. TECHNICAL COMMENTS REQUIRED See Below ///////// Outer.java public class Outer i