How to "Call by Reference" when running in RealTime (path does not work)

I have a .vi which has been "uploaded" to a PXI chassis to run in RealTime.
I have this feeling that one of my sub-vi's are not functioning properly. I have a sub-vi which "Opens a VI reference" to a .vi located on my Windows harddrive. But, when everything is setup in Realtime, it cannot locate this .vi anymore.
I need to load a .vi dynamicaly, multiple times. Is there another way around it?

Yes, that worked well. I had gotten it to work, but had not replied to this post to indicate my success. My actual problem had to do with me forcing a "close front panel". I had read in some other posts that you cannot modify front panels or other user-activity type of options when running real time. By removing the "FP Close" function, the call to the specific .vi worked great (and with the addition of the IP address for the opening of a local reference). Thanks again for all the input.

Similar Messages

  • Negative (to inline a letter or to thin it) offset path does not work in Illus-CC 2014 (when preview is on- nothing happens). How can I get this to work like in previous versions.

    Negative (to inline a letter or to thin it) offset path does not work in Illus-CC 2014 (when preview is on- nothing happens). How can I get this to work like in previous versions.

    Thanks for your quick reply. I tried a number of different values. Usually when I do a negative offset they're very small values, like -.25 or -.5.
    An Update- I took the art work into Ai CS 6 and It still did not work, which is really strange. And I've used it hundreds of times with success in the past. Also I tried it with live type and outlines, ungrouped, un-compounded still could not get it to negative offset.
    Thanks for the help.

  • In iTunes 11.1 (I26) , I cannot find how to delete podcast listings showing undownloaded podcasts. Delete does not work. Option Delete does not work.  Dragging to the trash does not work. Under Edit, Delete is greyed out. Mac OS 10.6.8

    in iTunes 11.1 (I26) , I cannot find how to delete podcast listings showing undownloaded podcasts. Delete does not work. Option Delete does not work. Dragging to the trash does not work. Under Edit, Delete is greyed out. Mac OS 10.6.8.
    Tom at the Genius Bar told me that Option Delete would work. It does not.
    I had to upgrade to iTunes 11.1.(I26) because it is required with OS7 on my iPod Touch (5th Gen). I have tried shutting down iTunes, then shutting down the entire system. This is the first in many visits that the Genius Bar gave me a solution that did not work.
    This is a big awkward computer locked to my desk. I would rather not unlock it and then carry it through a shopping center to the Genius Bar if i can avoid oit.
    When I installed iTunes 11.1, I discovered that Ihad to resubscribe to virtually all of the podcasts that I had previously been subscribed to. That was a surprise.

    Hello Achates:
    I did not read the rather long post. If you wish to reinstall OS X 10.4, use your software install DVD. Backup is essential. To minimize your risk, I would use an archive and install:
    http://docs.info.apple.com/article.html?artnum=107120
    In that way, you will have a fresh copy of OS X and your current settings will be preserved.
    Incidentally, I do not agree that the printer problem is best solved by reinstalling OS X. I have had HP printers for sometime and, on one occasion, had difficulty after an upgrade. HP technical support walked me through uninstalling all traces of the HP driver and then reinstalling.
    Barry

  • HT1430 How can you restart your iphone if your lock button does not work?

    How can you restart or turn off your iPhone if the lock button does not work?

    The best way is to let the battery die. Or you can reset the phone settings which restarts everything.

  • Documents to go app is not working.in the screen when I opened it it does not work

    In my I pad I installed documents to go apps.now  when I touched the  icon it does not work.

    Hi abeysingha,
    Welcome to the Support Communities!
    The following article will provide some troubleshooting steps for this issue:
    iOS: Troubleshooting applications purchased from the App Store
    http://support.apple.com/kb/ts1702
    I hope this information helps ....
    Have a great day!
    - Judy

  • How do I get a refund for an App that does not work correctly?

    How do I get a refund for a App (Express Newspapers)  that does not work correctly?

    How to report an issue with Your iTunes Store purchase

  • How do I take a screenshot? Alt + prt sc does not work nor anything else I've tried.

    I have to take a screen shot for a course I am doing. The instructions I received were: Alt + print screen command. This does not work. Keeps reloading the home page. Also tried prt sc with the shift, control, and fn keys and nothing works. I have done a screen shot before but cannot remember how I did it. Rather desperate to figure this out. Any ideas?

    You usually copy the screenshot to the clipboard and paste that image in an image editor program like Paint. Then you can save the image as a .jpg or .png file.
    http://www.wikihow.com/Take-a-Screenshot-with-the-Snipping-Tool-in-Vista
    http://www.microsoft.com/windowsxp/using/setup/tips/screenshot.mspx
    http://en.wikipedia.org/wiki/Screenshot#Microsoft_Windows

  • Start Run thunderbird.exe-p does not work in windows 7. how find/runProfiles manager?

    I am trying to manually transfer my address book etc. from TB on my desktop [windows XP ] to my Laptop running widows 7. Have followed all instructions, using a memory stick to make the transfer manually. System reports it is working and takes several minutes. After completion address book is blank. Thought problem might be the name of the backup file, so changed name to same as default profile name on windows 7. Same nil result. Instructions say to create new profile using Profile manager; access by windows 7 Start>Run>Thunderbird.exe-p. Windows 7 reports cannot find the file. Also tried windows 7 Start>Run>Thunderbird.exe-P, same no find file. Can anyone explain how to locate/open/run Profile Manager, other than as tried ? When I type "profile manager" into Help search, all I get is the same general information and not about Profile Manager itself. Also why does Pasteing backup profile onto the new TB seem to work, but in fact does nothing ?
    Regards, Tom

    '''How to activate the 'Profile Manager' and create a shortcut icon on desktop to make future access easier:'''
    * https://getsatisfaction.com/mozilla_messaging/topics/where_is_the_profile_manager_hidden_in_windows_8
    * http://kb.mozillazine.org/Profile_Manager
    Note: 'Start>Run>Thunderbird.exe-p' is not correct, so you are not following the instructions. Please read info at the above links above to enter the correct path. the info for Win7 and win8 are the same.
    However, before going down that route ; I preume you have already created a Profile in Win7 machine; please read the following information.
    re: 'trying to manually transfer my address book etc. from TB on my desktop [windows XP ] to my Laptop running widows 7.'
    So are you trying to just migrate the address book or the entire Profile?
    '''If just migrating various Address Books.'''
    The 'Personal Address Book' and the 'Collected Addresses' are default Thunderbird files. These files can be copy pasted from one profile to another.
    To see Profile folders:
    * make hidden files visible: http://kb.mozillazine.org/Show_hidden_files_and_folders
    * In XP Thunderbird, 'Help' > 'Troubleshooting Information'
    * click on 'Show folder'
    * close Thunderbird now.
    * scroll down and look for 'abook.mab' and 'history.mab'
    * copy those files and move to same location on the Win7 machine.
    For other address books.
    * In XP Thunderbird
    * select 'Address Book'
    * select the name of the address book
    * Tools > Export
    * choose where to save
    * give suitable filename
    * Save as type: comma separated .csv or LDIF
    * Copy that file to desktop of new Win7 computer.
    Then in Win7 Thunderbird Address Book
    * Tools > Import
    * Choose the saved address book and click on Open.
    '''If you want to migrate the entire Profile:'''
    This can be done manually or using a tool called MozBackup. See info at this link:
    * http://kb.mozillazine.org/Move_to_a_new_PC
    When manually copy pasting files, I presume you have installed Thunderbird on new win7 machine and allowed it to run for the first time to create a Profile, but did not choose to create any existing accounts. So you have a Profile, but no mail accounts except for the default Local Folders.
    The files you need to copy are:
    * In XP Thunderbird, 'Help' > 'Troubleshooting Information'
    * click on 'Show folder'
    * close Thunderbird now.
    This shows you all the files '''in''' your Profile folder. These are the files you need to copy and paste into the new Profile folder in Thunderbird on Win7 machine, overwriting the default created files.
    now open Thunderbird.
    '''Additional info: on Profile folder: '''
    * http://kb.mozillazine.org/Profile_folder_-_Thunderbird

  • PSE 10  and Adobe CS6: When running silent install help is not working afterwards

    Hello,
    I'm not sure if this is the correct forum. If not: Please help me find the correct one.
    I have a big issue with Adobe CS6 (and former versions like Photoshop Elements 10): When installing it from DVD running GUI everything is working fine afterwards. If I install e.g. Photoshop Elements 10 using "Silent Installation" help is not working afterwards. It states that it cannot locate the URL. I have not installed AIR and also do not plan to install it.
    I have 'played' a little around with Common Files\Adobe\helpcfg and help directory. Now at least I do not get an error message but still it's not the online help which opens in the browser but the web page that is defined as 'home'.
    The same I see now in Adobe CS6. I have e.g. packaged After Effects and Illustrator and when deploying it I'm not able to open help as well and I fear that this is the same issue.
    Has anyone deeper knowledge about how "helpcfg" is working? Any example files? Any other help appreciated as well.
    Kind regards
    János

    @hannilator Have you checked the exceptions folder contents for instructions on how to push to logged off computers? Here's what I get when I package CS6 (DesignWebPrem) and excude AIR/CHC:
    After you have deployed the package, separately install the products in the exception folder.
    IMPORTANT: Before you install the products in the exception folder, refer to the following Adobe Knowledgebase article for information on installing these products and configuring the settings correctly:
    http://www.adobe.com/go/aamee_exceptions
    NOTE: The installation commands provided below will work when the user is logged in to the client machine where the package is being deployed. For the scenario where the user is not logged in, prefix the following string to the command:
    sudo launchctl bsexec `ps auwwx |grep [l]oginwindow | awk '{ print $2 }'`
    As an example, here is the command to install "Adobe AIR" when the user is not logged in to the client machine (assuming Adobe AIR is part of the package):
    sudo launchctl bsexec `ps auwwx |grep [l]oginwindow | awk '{ print $2 }'` Adobe\ AIR\ Installer.app/Contents/MacOS/Adobe\ AIR\ Installer -silent
    ###################################### Command to install Adobe Dreamweaver Widget Browser ######################################
    Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer -silent -eulaAccepted -programMenu WidgetBrowser.air
    ###################################### Command to install AdobeHelp ######################################
    InstallAdobeHelp appVersion=4.0.244 appId=chc pubId=4875E02D9FB21EE389F73B8D1702B320485DF8CE.1 installerArg1=-silent installerArg2=-eulaAccepted installerArg3=AdobeHelp.air

  • GTS Block when running SPL Address simualtion does not show blocked

    When running a GTS SPL Screening for general address, transaction /SAPSLL/SPL_CHSS3; the simulation does not show a block for Transavia; however if I change the name to Transavia Network it will block.  I need this to block on the name Transavia.  I have changed my fuzzy logic in SPRO > IMG>SAP Global Trade Service>SAP Compliance Management>Sanctioned Party List Screening Service>Define Control Procedure for Address Comparison
    In Detail Control in Keyword generated from name I have the follwoing settings:
    Comaprison Procedure SPLUS
    Search Term Origin Keyword generated from name
    Check Object is selcted
    0 Linking Operator Logical OR (at least one OR operation Satisfied)
    B Relational Operator Comparison Index and Keyword from address are identical
    In Minimial Similarity I have the follwoing settings:
    Search Term 72%
    2 Search Term Origin Basis for Comparion Parallel from Sanct Party List/Address
    Originating Feature 49%
    2 Basic Val No Terms Number of Terms in Each SP List or Partner Name
    Allow Multiple Matches for Origin is NOT check
    Edited by: Kim Blair on Jan 13, 2012 3:06 PM

    Hello Jasmit and Vishal
    Sorry it has taken me a long time to repsond and this is still an issue.  I have been bogged down with other things that has consumed my time.
    I have tried to reset the buffer but to no avail.  No we are not suing TREX.  We are currently on GTS 7.2. but soon to upgrade to GTS10...This is really a strange issue...I can do a check on the name David and it will block...that is a shorter name than Transavia....so I am really confused by this...again Transavia Network will block...same country...
    Any guidance on this is really appreciated. 

  • How do I get a virtual lab to play,quicktime does not work with this CD,I have quicktime on other computers works fine with this CD. Technician said Cd could

    How  do  I  get  a  virtual lab to  work  on  this  computer.  The  technician  said  the  CD  is  not  compatible. Maybe  corrupt. He  seemed  he  did  not  know
    what  he  was  talking  about. I  asked  him  was  it  any  software  I  could  download  he  said  no.  This  CD  works  fine  on  my  other  computer, no  it  is  not  an  apple  computer. And  I  use  quicktime  on  both  computers. But  on  this  apple  computer  quicktime  does  not  play  this  CD, which  this  type
    of  CD  works  better  with  quicktime. Any  suggestions  on  how  to  solve  this  problem.  This  is  a   new  computer,  I  would  hate  to  think  their  is  nothing  that  can  be  done.

    I  need  step  by step  instructions  on  how  to  get  my  virtual  lab  cd  to  work. The  technician  said  cd  not  compatible  or  is  corrupt.  I  do  not  believe  their  is  nothing  that  can  be  done.  When  I  put  the  cd  in  the  side  slot  nothing  comes  up  on  the  screen.  I  have  tried  several   ways, the  technician  did  not  seem  very  knowledgeable  on  what  to  do. Also  this  cd  plays  fine  on  my  other  computer  which  is  not  an  apple  computer. Is  there  anything  I  can  do  to  correct  this?

  • How do I turn my nano off when holding the pause button does not work?

    my nano won't turn off or take a charge.....Help.

    You know, one good way of putting people off helping you is to post multiple threads with your one problem in it. It's very silly and very tedious.
    Have you checked the thousands of other threads that have discussed this same problem? That would probably be a better use of your time than what you are doing now.

  • SPA9000 / SPA400 call forward to voicemail on SPA962 line2-6 does not work

    Hi
    I have an SPA9000 with an SPA400 providing voicemail.  With a SPA962 setup with 6 users one on each line.  When the AA sends a call to the first line (line1/ext1) if unansered the call is then picked up by the voicemail on the SPA400. The problem is that when the AA sends the call to any of the users on lines 2-6 the phone just rings for a while (longer than line 1 does) and then the call is dropped, it never gets picked up by the vociemail.
    does anyone know if this a limit of the system or a limit of me?
    Cheers

    Hi
    I have an SPA9000 with an SPA400 providing voicemail.  With a SPA962 setup with 6 users one on each line.  When the AA sends a call to the first line (line1/ext1) if unansered the call is then picked up by the voicemail on the SPA400. The problem is that when the AA sends the call to any of the users on lines 2-6 the phone just rings for a while (longer than line 1 does) and then the call is dropped, it never gets picked up by the vociemail.
    does anyone know if this a limit of the system or a limit of me?
    Cheers

  • How can I save a jpeg? Cntrl-click on does not work as it did in version 2

    In Firefox 2 I could hold down the Control key and click on an image to open a window with a "Save as" choice. Then I could name the image and chose a location to save it to. In Firefox 3, the window opens as before but the "Save as" choice does nothing. So how can I save website images as jpegs in a specified location such as a folder on my hard drive or on a memory stick?

    Hi ddt333,
    Base on my test again, I found that if the value of relative position is less than 1, it will uses the absolute position, you could change its position to relative position with the value less than 1 (e.g. 0), after save and re-check its position, you will
    find that it still uses absolute position. By default it uses the absolute position, so when we add the new textbox to the document, its position is at left-top of document (left=0, top=0).
    The RelativeHorizontalPostion property is used to specify its
    relative to type (e.g. page, marging)
    There are LeftRelative and TopRelative properties of shape, so please specify these properties’ value, then change
    relative to type of shape.
    Regards
    Starain
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How do I get a refund for an app that does not work?

    Recently downloaded an app for my iPod Touch.  It said it was compatible, but when I try to open the app, my screen goes blank for 3-5 seconds and then goes back to the menu page.  After reading further reviews of this app, several people are having the exact same problem.  I reported the issue to both Apple and the app manufacturer, but did not receive a response from either.  Apple then proceeded to charge my credit card as usual.
    The amount of the money ($3) is not significant, however, I feel that Apple should have a reliable way for customers to report problems with the apps they download and are being charged for.  I realize I could simply contact my credit card company and have the charge disputed, but there should be a way to deal with Apple directly on this.
    Does anyone have any input or experience with this?
    Thanks!

    Yes, I reported the problem using that exact sequence immediately after discovering the problem with the app.  When I submitted my complaint and request, Apple redirected me the website of the app manufacturer where I submitted the same complaint/request for refund.  I have not heard back from either, and was still charged, so I can only assume that is not the correct way to "Report a Problem" even though Apple would have you believe otherwise.

Maybe you are looking for

  • How to show skip question again in online exam application

    Hello Everybody...! Now i want to put Skip functionality in my online examination system. I am having two button in my exam page one is Submit and second one is Skip.when user click on skip button he must get next question here user have 100 question

  • Usb devices no longer work - after itunes 8 uninstall as well.

    Have uninstalled itunes 8 as outlined in various posts on internet. However, now none of my devices such as camera and printer are recognized by my computer. Hope someone has solved this problem. Thanks.

  • Does Adobe Application Modeling plug-in work for Eclipse 3.7

    I Installed Flex 4.6 plugin in Eclipse 3.7 later I installed the Adobe Application Modeling plug-in(listed for Eclipse 3.5 For Eclipse 3.5 Download) but could not view the Data Model perspective It throws an error Could not create the view:An unexpec

  • Does iDVD really take 6 HOURS to burn a DVD???

    This is my first DVD to burn on the iMac. Previously I have used DVD Shrink on a Windows machine which took about 1 hour from rip to completed burn. I have already used the Hand Brake program to create a mp4 and I am using iDVD to burn a new DVD and

  • All photos being automatically downloaded by Mail

    I've noticed that Mail seems to automatically download all photos that have been sent as attachments to my laptop - is there a way to stop this?