How to call Custom screen in standard transaction on same session
Hi ,
I am getting this Problem.
After one of the screen in standard Transaction (CV01N) I need to call one custom screen. for this I created one program type M with screen. in Stan. transaction I am calling like Call transaction 'XXXX'(for above M program).here I am geeting all my required functionality .but I am getting this custom screen in separate session. I want to call this custom screen on same session of std transaction ( means background custom screen is std.screen).
Can any one guide me to achive this functionality;
Regards,
Saida.
Hi Agasti,
Thnx for your reply.
I tried that method also. even that also calling the Custom screen in new session not in SAP standard session.
Regards,
Saida
Similar Messages
-
Calling custom badi in standard transaction
Hi,
Badi is used for enhancements . To enhance the sap standard things there will be some badi definitions avilable .
To activate that definitions we have to implement the badi.Some times we will define the badi in se18 and we will implement in se19. How can we call the custom badi which are created and implemented by us in standard transaction.
Regards,
karthickHi
The custom BAdI will be called when the BAdI definition is getting called.
You can put a breakpoint in any method of your custom BAdI, if the BAdI definition is getting called then it will stop at your breakpoint.
You can also check the BAdI definitions which are getting called by putting breakpoint at method get_instance of class cl_exithandler.
Best Regards,
Nikhil Patil -
How to create custom routine in standard transaction
Hi all,
Can anybody suggest me how to write a custom routine in a standard transaction?
My Requirement : In standard transaction ' VTFL ', For each target and source there will be a standard routine assigned, for COPYING REQUIREMENTS. Each routine serves a particular functionality. I need to develop a new functionality. For that, I need to develop my own routine.
Please give me an idea of how to develop a custom routine and include that routine in this standard transaction ( VTFL ).
Any Suggestions are appreciated.
Thanking you in advance,
Regards,
Murali Krishna TPiyush,
The best way is to create a region in Jdeveloper and import it to server.
Finally create a flexible region using personalization and specify the path the Custom region.
This will help you to have a better control as well as alignment issue to be resolved.
Regard,
Gyan -
How to call custom screen from User exit?
Hai,
I have to call a custom screen from user exit include after the delivery save.
Depends on the data in the delivery,
if the data satisfies certain conditions I will call the screen otherwise no.
Could any one please tell me how to do this?where to create screen & how to link it here?
Regards,
Bhaskar.Hi,
Please check with the following Enhancements -
V50PSTAT - Delivery: Item Status Calculation
V50Q0001 - Delivery Monitor: User Exits for Filling Display Fields
Rewards if it helps
Regard
Goutham -
HOW TO PASS THE DATA FROM SELECTION SCREEN TO STANDARD TRANSACTION?
HI,
HOW TO PASS THE DATA FROM SELECTION SCREEN TO STANDARD TRANSACTION?
thanks,
samba.By selection screen, what do you mean? There is no selection screen in WDA as there was in classic dynpro. Do you mean you are using the Select-Options reusable component? Are you wanting to call a standard transaction via ITS - SAPGUI for HTML? Please provide more details to your question.
-
How to create F4 for the standard transaction
Hi all ,
How to create F4 for the standard transaction for a particular field .
ByeSantosh,
You can create F4 values for a field in a standard Transaction .
1. First search for a standard search help meeting your requirement .
2. If you don't find one, create your own custom (z) serach help .
( 1 is preferable )
After that, include that serch help to the standard field in the transaction .
For this u need to go to the screen
( F1->F9-> screen-> Field )
Click on the property of the field and include the search help .
You ll require the access key from the basisi guys as u r changing standard .
Hope it helps,
~ laxmi
Reward for helpful answers -
How to Assign Customized BADI to Standard T.Code Example ME51N
Dear all,
It would be really appriciate if you provide me a solutions.
I have Created Customized BADI using SE18,SE19. But I am not aware How to Use those BADI in Standard Transaction.
Example : I have Created PR Related BADI (ZPURREQ_ACC_CHK). How to utilize this BADI In ME51N,ME52N.
Please advice me.
Thanks
Best Regards,
KSKI think what you need to do is find what exits or existing BAdIs are available for the transaction. Then in the user exit you can call your customized code. That way you avoid changing SAP's code for the transaction. You can find BAdIs related to purchasing by going to transaction SPRO and then following this path:
Materials Management -> Purchasing -> Business Add-Ins for Purchasing
I hope this helps.
- April King -
How to export customer/vendor aging detailed transactions to excel ?
hi all,
How to export customer/vendor aging detailed transactions
to MS-Excel ?
After entering all selection creterias,report
opens up with consolidated aging details
for each customer,we need to double click a
customer to get detailed break up of all transactions,
Is it possible to export to ms excel for detailed transations break up of all customers/vendors ?
In standard it is only possible to export detailed
transactions break up for a customer/vendor ?
JeyakanthanThanks,
Eventhogh we don't need detailed aging report in print,
we converted print preview into text file
and then converted to excel format.
Jeyakanthan -
Calling custom form to standard form based on passing parameters by pers..
Hi Everyone,
I have a urgent requirement related to form personalization like Calling custom form to standard form based on passing some parameters and after click on save icon then custom form should be enable and open. how to achieve this functionality through personalization.
In brief ......Responsibilty -> Enterprise Asset Management->work order form and in this form's tool menu attach a custom form which comes other responsibility(here no issue) issue is that which trigger and condition used and what should be Action attribute/option. How to disable or enable tool form on some specific navigating the form.
and how pass the parameter through current using form fields.
plz help me out........it's urgent.
thanks,
Abh....Abh,
Forms Personalization is a feature of the Oracle Enterprise Business Suite (EBS) not a feature of Oracle Forms. Please post your question in the General EBS Discussion forum. If you have a general Forms question, by all means, ask it here! ;-)
Craig B-)
If someone's response is helpful or correct, please mark it accordingly. -
Photoshop CS6 could not update successfully. Error codes Adobe Photoshop 13.0.1.3 Installation failed. Error Code: U44M1P7 Extension Manager 6.0.8 Update Installation failed. Error Code: U44M1P7 Please help me figure out how to call customer service. I would prefer to talk to someone directly.
Are you using any disk cleaner or optimization tools like CleanMymac or Mackeeper?
Regards,
Ashutosh -
How to call the screen in methods could u please explain
hi,
how to call the screen in methods could u please explain clearly with exampleHI ,
CALL SCREEN - Call a screen
Basic form
CALL SCREEN scr.
Addition:
... STARTING AT x1 y1 ... ENDING AT x2 y2
Effect
Calls the screen scr; scr is the number of a screen of the main program. You use SET SCREEN 0. or LEAVE SCREEN. to define the return from the CALL screen.
Note
Please consult Data Area and Modularization Unit Organization documentation as well.
Addition
... STARTING AT x1 y1 ENDING AT x2 y2
Effect
The coordinates x1, y1 (start column and start line in the window) and x2, y2 (end column and end line in the window) define the size and position of the CALL screen ("top left - bottom right"). Besides these coordinates, you can also see the contents of the primary window, but cannot perform any action there.
Note
If "ENDING AT ..." is not specified, suitable values are substituted for x2 and y2, taking into account the size of the called screen.
Exceptions
Non-Catchable Exceptions
Cause: No further screen level (call screen); the maximum number of nested screen levels is restricted to 50 at present.
Runtime Error: DYNP_TOO_MANY_CALL_SCREENS
THX -
Hi All,how to call custom API in ODI and how can multiple people run the scenario at same time. I explained my process below
1. Through ODI console pass parameter (file name) to scenario and read the file form configured location
2. Insert the data from flat file to custom table
3. Call custom API
4. Generating a report in ODI in same location where we read the file from. Creating sample report just reading from custom table
5. The above design should be such that multiple people can run the scenario at same time.
can any one help me on step 3 and step 5 how to go forward..
Thanks in Advance.
Edited by: 981371 on Mar 4, 2013 3:19 AMYou can invoke java api in the procedure or KM tasks. You can select Jython technology type and can call the custom java API.
You may find relevant info at
http://docs.oracle.com/cd/E23943_01/integrate.1111/e12643/procedures.htm#CHDIDDFE
http://docs.oracle.com/cd/E23943_01/integrate.1111/e12645/intro.htm#sthref5
http://docs.oracle.com/cd/E23943_01/integrate.1111/e12645/api_intro.htm#CEGFCFHC
You can directly put DB functions in the your mapping expressions. -
How to call our smartform in standard report
Hi friends,
How to call Zee smartform from standard report without affecting stadard flow.
Thanks,
YogeshHi,
do it this way.
in the ALV function call
give in
exporting
I_CALLBACK_USER_COMMAND = 'user_command '
write a subroutine
FORM user_command USING whatcomm TYPE sy-ucomm whatrow TYPE
slis_selfield.
case whatcomm.
when 'print'.
call 2 function modules here
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING FORMNAME = P_FORM "Your form name
variant = ' '
direct_call = ' '
IMPORTING FM_NAME = FM_NAME
EXCEPTIONS NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
EXIT.
ENDIF.
calling the generated function module
CALL FUNCTION FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS = CPARAM
OUTPUT_OPTIONS = OUTOP
USER_SETTINGS = SPACE
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
IMPORTING
JOB_OUTPUT_INFO = TAB_OTF_DATA
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endcase.
endform.
This is an example in the function gereated call give you own importing and exporting parameters.
Regards
Kiran Sure -
How to Call another screen using the ABAP Report which is displaying ALV ou
Hello All,
I am developing a ABAP report in which I want to transfer the stock from material to another material.
My Report will include 3 to screens.
The first sleection screen will display all the material with their stock value.
When we execute the report I will get the list of materials along with their current stock. On the top of the output screen I want the Execute button. Also , each line of the output should have checkbox or the ALV provides the functionality of editing one cell like that.....Once the user tick the checkbox or the cell....then I want to move to another screen where user can enter the Quantity and then user will tick ok and then I will call one function module so that the material documnet is posted and transfer of posting form material to material is done successfully.
Could anyone please help me out how to call another screen from the output screen where user can enter the Quantity amount....
I dont want to use the Dialog programming.....I want to create the simple ALV Abap report.
Regards,
Komal Bhutada.Hi Raymond,
Thanks for the input...I will try this in my code .....
Can you please help me how to insert the checkbox in the ALV Output....so that I can select one of row and then press execute to process further?..
Thanks for the information.
Regards,
Komal. -
How to Call Custom BPEL Process using JSP
Hi All,
I m not able to find out the way " How to deploy Custom BPEL process using JSP." Suppose I m Designing my custom BPEL process , and I want to call process through JSP.
In order to call the BPEL process using JSP I may get the Reference from Oracle guide, But it is for Existing Example like Hello world, Order Booking.
But I am facing the problem in order to call the Custom BPEL process.
In case of Oracle Example it looks Simple but How to call Custom BPEL process using JSP.
Please help me.
Thanks&Regards
Devesh Mishrahi
The BPEL Developer guide give the way to Locate the service.can you please specify where you are getting the problem.
Thanks,
Sivakumar
Maybe you are looking for
-
Where to legally download adobe photoshop cs4?
I'm trying to install Photoshop CS4 on my new computer as I've already got the serial number and it's installed on my old computer. I've looked everywhere and it seems like i cant download it anymore and using the C:\ProgramData\Adobe file from my ol
-
Return to Vendor Process on Closed POs
Hi, A quick check. We have a scenario in which we are returning goods to vendor for closed POs which are not available in the SAP system. These closed POs are available in BW system for reference. How do we resolve this problem? Please share your tho
-
I have a BPM and I want to bring in ALERT mechanism when my BPM Fails, how to configure the alert in BPM? Thanks.
-
During airplaying music, automatically start in the back ground, my contacts, photos messages etc. What can I do?
-
Where are firefox preferences ? I can't adjust anything !
Trying to watch web animation. Image is high resolution but firefox only shows it as full resolution - way too big for the window. I tried getting the zoom add-on, but that zooms only the text. There's no place on the firefox right-click window for a