How to call FPM application from a WD ABAP view

Hi
My requirement is to navigate to an FPM application on click of a button in a WD component. And along with the navigation I need to pass parameters (internal table) along with it.
Can anyone suggest ways to achieve this. And also how to get the parameter values in FPM application.
Regards
Prashant

Dear Prashant
Check this:
[Passing Data to Webdynpro from normal module pool screen;
Kind Regards
/Ricardo Quintas

Similar Messages

Calling FPM application from another FPM application

Hello Experts,
I've created 2 FPM configurations, one displays the list of POs created by the user through a List UIBB and the other displays the Header and Item of the PO when selected.
Scenario is that when I should click on the PO (which is a link) in my 1st application, I need to pas the PO number and some other details to my 2nd application and display the PO header and Item. My all Config is purely UIBB based and I'm not using webdynpro at all for designing any views, everything is designed using FPM UIBBs and feeder classes only.
what I need to know is:-
1) how can I pass the data between 2 different FPM applications?
2) how to call and display my 2nd Application on the same page when I click on the link of 1st application? I need the BACK functionality as well.
3) how to get the data into my 2nd application from 1st application?
Plz suggest.
Best Regards
Jitin Kharbanda

Jitin,
The best option in your case would be to open a new browser window with the second application and pass an URL parameter along with the document number.
Then you can read the URL parameter in the second application. Please see Re: Determining Edit/Display Mode from Within Freestyle Component how this can be achieved.
Embedding another FPM application into an already opened FPM application (e.g. by embedding a freestyle UIBB and loading the second FPM application from there) won't work as the FPM runtime will cause a dump saying that two instances ofthe FPM are not allowed.
If you MUST embedd your second application into the first one, the only chance that comes to my mind is the merge the configurations of both applications and pass the data via singleton / wires / events. Please see Data exchange possibilities in Floorplan Manager
Regards, Uwe

How to call WD Application from another WD Appliction

Hi all,
how can we call webdynpro application from another wbdynpro application on click of a button in the same browser.
pls suggest
regards
vishal

Hi Vishal,
Just try to Embed the another WD Component into Component Controller first.
And then Create a View and map it to window as U regularly do,
then in Window- Explore the tree until that View, now open Context Menu for Embed View Option and from the scroll U get search for that WD Component U wanna Embed.
U also have to handle Plugs here, Because the result application required some parameters to be passed that U do from ur first application by passing those values through Plugs.

How to call WDA Application from an other SAP System

hello all,
I have a WDA Application and if the user click on a Button in this Application, i need to call an other WDA Application from an other SAP System.
example: SYStem X01 has a WDA Application and there is a Button in this Application, if the User click on this Button, a WDA Application from an Other System X09 shoud be displayed in the same window, same WDA IFRAME .
can any one tell me how can I do this?
Thank you all

Hi,
As mentioned earlier, you need to pass the host name and port of the second system. If the application name is same, pass the same application name.
DATA: lv_url TYPE string,
       lv_host TYPE string,
        lv_port TYPE string,
        lv_protocol TYPE string.
CALL METHOD cl_wd_utilities=>construct_wd_url
    EXPORTING
      application_name = 'ZWD_APPL_NAME'
      in_host          = lv_host   " host name of second system (X09)
      in_port          = lv_port    " port of second system
      in_protocol      = lv_protocol " protocol of second system
*      in_parameters    = lt_parameters
      namespace        = 'sap'
    IMPORTING
      out_absolute_url = lv_url.
To get the Host, Port and Protocol of second system, wrap the below code in a Function Module(RFC) in X09 and call this in X01 and then pass them to the cl_wd_utilities=>construct_wd_url as mentioned above
CALL METHOD cl_http_server=>if_http_server~get_location
    IMPORTING
      host         = host
      port         = port
      out_protocol = out_protocol.
hope this helps,
Regards,
Kiran

How to call webdynpro applications from outside

Hi
I have a requirement where i need to call below webdynpro application from outside (for ex CRM,ISA..) environments
http://test.com/webdynpro/dispatcher/test/eomp~eompapp/EmpDisp?EmpNo=0500002203. When i am running this application from
browser , my application working fine and i am able to see call to the backend BAPI's. But when I configure this url
in the configurations of the above environment. I am unable to run this application.
Any Idea?
Thanks
Prasad

Hi
I am not getting any error, but the backend call not hapening. I put a debugger in the backend BAPI and run the webdynpro application , no input parameters came or call came to the the backend BAPI.
Thanks
Prasad

How to call WebDynpro application from an external application

Hi All,
I have an external application, from which an existing webdynpro application should be accessed.
Is there any way i can access WebDynpro application through an URL, so that i can access the same from the external application.
I have to pass a parameter also in the url from extrenal application for which that data should be displayed.
Thanks
Supriya

You can call a web dynpro application from an external app by using the web dynpro application url.
Go to WD application in studio and look at the properties tab, you will find the url.
It should be something like this:
http://<host>:<port>/webdynpro/dispatcher/<namespace>/<dc name>/<application name>
MLS

How to call t-code from web dynpro ABAP application

Dear Gurus,
I am new to ABAP web dynpros. I have to add a button and have to call a SAP standard t-code if user clicks on this button? How to accomplish this task? Any help or example would be appreciated.
Thanks,
GSM

Hi GSM,
You have to create a SAP transaction iView in your Portal, then obtain its URL in your webdynpro and call WDPortalNavigation.absolute() method.
Below are the same steps in more detail:
1) Create a SAP Transaction iView or an Internet Application Component iView (whichever you find convenient). While creating you can select whether you want to use SAP GUI for windows or SAP GUI for HTML. For the latter(GUI for HTML) ensure that your ITS is working fine and configured while creating the system in EP.
2) Open the properties of the SAP transaction iView created. In the OK code field you can give the ok code value just as you give in SAP R/3 in case you want to navigate to the second screen of SAP R/3 when you pass values from WebDynpro.
Example for the above would be say Transaction "VA03" for displaying Sales order. Suppose from Webdynpro i want to pass a parameter called "Order number" and when i click a button it should pass the order number to R/3 and skip the first screen required for inputting the sales order numbe.
It should directly go to the main display of sales order for that ordernumber.
3) Create your WebDynpro component and deploy it on the server. In your WebDynpro use the WDPortalNavigation.absolute() method and give the url of the SAP Transaction iView created as a parameter and also the required parameters that you would like to pass from WebDynpro.
4) Create a SAP WebDynpro iView in the Portal.
5) Now run the Component. It should open up your SAP Transaction iview.
Regards,
Uday

How to call msword application from java program

hai every body
i want to know about OLE in java.
how can i invoke msoffice application in java code.
if any body have sanple code for this post for me
thank you

There are some bridges available ...
http://www.google.com/search?q=ole+java+bridge

How to call BW report from CRM via ABAP

Hello,
I want to call a BW report from CRM, this I want to invoke from a screen with some parameter.
I have a BW user which I also wants to pass from CRM screen, while calling BW report as parameter.
Can some one help me, how to invoke a BW report (in browser) from CRM ABAP code with passing username and password (which is a generic user to all) and with some parameters to BW report, so that can directly see the report output in the browser.
Thanks a lot in advance.
With Best Regards,
-Praveen Soni

Praveen,
all you basically have to do is construct a URL in your ABAP program and call the browser with it. In the URL you can pass the right parameters. Execute your query in transaction RSRT with option HTML and you see parameters. Or execute it directly in the browser.
When you have the URL, just do call function 'CALL_BROWSER'.
Regards,
Marc
SAP NetWeaver RIG, US BI

Web dynpro abap : Call an application from another with parameters

Hi ,
Could you please tell me how to call an application from another with parameters?
Thanks a lot
Karim

* Construct the URL
      call method cl_wd_utilities=>construct_wd_url
        exporting
        application_name              = 'APPLICATIION_NAME'
      importing
        out_absolute_url              = g_url.
* Append parameters to URL
data: g_par1 = lv_value. " value of your parameter
call method cl_http_server=>append_field_url
    exporting
      name = 'PAR1' " Parameter name
      value = g_par1
    changing
      url   = g_url.
* Call the Application
DATA lo_window_manager TYPE REF TO if_wd_window_manager.
DATA lo_api_component TYPE REF TO if_wd_component.
DATA lo_window         TYPE REF TO if_wd_window.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
lo_window         = lo_window_manager->create_external_window(
                   url = g_url ).
lo_window->open( ).

How to call a package from the Report in Oracle Application Express

How to call a package from the Report in Oracle Application Express

Hello,
What do you mean? Something like SELECT mypackage.function( par1, par2) from dual?
Or do you want to execute a procedure when something happens on the page, like clicking a button?
Greetings,
Roel
http://roelhartman.blogspot.com/
You can reward this reply by marking it as either Helpful or Correct ;-)

How to call java program from ABAP

Hi Experts,
My requirement is to call java programs from ABAP. For that i have set up SAP JCO connection by using this link http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/739. [original link is broken] [original link is broken] [original link is broken] Connection gets sucessfully. After this how to call java program from ABAP as per our requirement. Please help me out.
Also i tried this way also.. but while executing the DOS Command line appear & disappear in few seconds. So couldnt see the JAVA output. Please help me out to call java programs in ABAP..
DATA:command TYPE string VALUE 'D:Javajdk1.6.0_20 injavac',
parameter TYPE string VALUE 'D:java MyFirstProgram'.
CALL METHOD cl_gui_frontend_services=>execute
EXPORTING
application = command
parameter = parameter
OPERATION = 'OPEN'
EXCEPTIONS
cntl_error = 1
error_no_gui = 2
bad_parameter = 3
file_not_found = 4
path_not_found = 5
file_extension_unknown = 6
error_execute_failed = 7
OTHERS = 8.
Thanks.

This depends on the version of your Netweaver Java AS. If you are running 7.0, you will have to use the Jco framework. The Jco framework is deprecated since 7.1 though. If you want to build a RFC server in 7.1 or higher, it is adviced that you set it up through JRA.
Implement an RFC server in 7.0:
http://help.sap.com/saphelp_nw04/helpdata/en/6a/82343ecc7f892ee10000000a114084/frameset.htm
Implement an RFC server in 7.1 or higher:
http://help.sap.com/saphelp_nwce72/helpdata/en/43/fd063b1f497063e10000000a1553f6/frameset.htm

How to call the Application configuration in run time.

hi guru,
i have created two Application configuraton and it working fine.
my question how to call the application configuration in run time.
Example :
Based on the user i want to change the Application Configuration.like Super user and Normal user.
Advance thank's
Regard's
Vivekanathan.S

Hi,
Please try out this way-
Have a look at this table -
WDY_CONF_APPLU - (Customizing Data for Web Dynpro Applications).
after you are done with the configuration--
Ge the config id for the given application from this table. And depending on the user get an entry from this table and display accordingly.
Please refer to these links -
different default layouts for different CONFIG_IDs
Get WDCONFIGURATIONID
Regards
Lekha

Calling BSP Application from Business Object?

Hi,
Can any one tried to call BSP Application from Business Object for showing in the Portal.
I have the following Scenario:
1. BSP Page: User will input the Date and Submit to store in the Database. and in this page the Workflow will be truggered and a Work item will be sent to the Next Level User.
2. When he executes the Work Item it has to trigger the BSP Application and has to show in the Enterprise Portal.
All this has to happen in the Enterprise Portal.
If any one knows how to triggere from business object, please let me know.
Thanks & Regards
Sumanth

Hi Vijay,
Thanks for the information. Its long back i was working on this, but not successful,
Now the similar requirement i need to develope in R/3.
I checked the mentioned class in R/3 4.7, This class is not available. I hope this is only in CRM because of PC-UI.
Any Suggesions how can i achieve this execution of BSP.
In one of the document i saw the Business Object BUS1006 as an example but i could not locate the way to reutilize the similar way.
Thanks & Regards
Sumanth

How to call a webService from WebDynPro ABAP ?

We are trying to call a webService from WebDynPro-ABAP application. It is not working, While if we are calling the WebService from a Report, it is working.
How exactly do we call a WebService from a WebDynPro-ABAP application?
What are the main steps involved ?

Hi Phani,
You will need to create a service call as follows.
Right click on your WD component name and select Create->Service Call
The wizard will guide you through a series of steps to make a Web Service Call. On the 3rd screen, it will give you options such as Function Module, Web Service, etc
Before making a service call, you will need to create a proxy for the Web service in the ABAP Workbench using a WSDL document as a basis. To create or consume Web services, you will need the authorizations associated with the role SAP_BC_WEBSERVICE_ADMIN.

How to call FPM application from a WD ABAP view

Similar Messages

Maybe you are looking for