How to call LabVIEW dll from ATL COM dll

I have tried to call simple LabVIEW 8.6 Dll from win32 test application, class Library.
I have include LabVIEW generated SharedLib.h file and SharedLib.lib file in the test application which I created as simple win32 console project and also from win32 class Library. I was sucessfully able to call my LabVIEW dll funtion.
But when I create ATL COM project and try to add SharedLib.h file and SharedLib.lib file I used to get following erors
Error 1 error C2733: second C linkage of overloaded function 'StrCatW' not allowed d:\program files\national instruments\labview 8.6\cintools\extcode.h 463
Error 2 error C2733: second C linkage of overloaded function 'StrCpyW' not allowed d:\program files\national instruments\labview 8.6\cintools\extcode.h 464
Error 3 error C2733: second C linkage of overloaded function 'StrCpyNW' not allowed d:\program files\national instruments\labview 8.6\cintools\extcode.h 465
Error 4 error C2733: second C linkage of overloaded function 'StrCmpW' not allowed d:\program files\national instruments\labview 8.6\cintools\extcode.h 466
Error 5 error C2733: second C linkage of overloaded function 'StrCmpNW' not allowed d:\program files\national instruments\labview 8.6\cintools\extcode.h 467
these many errors.
Will some one explain me how to call LabVIEW dll from ATL COM dll.
Thanks & Regards,
Jay

I also had this problem. My application is unicode-aware, but I was attempting to link it to a library with primitive C-string arguments. You could dynamically load the DLL as suggested (more work), modify the header files (really not recommended), or if you are feeling lucky you could try fooling the compiler, as I was successfully able to do in Visual Studio 2010, by steering the preprocessor around those functions (assuming you're not using them, of course -- otherwise this probably wouldn't work):
// prepare for NI extcode.h inclusion. avoid linker errors for this project.
#define StrCatW(a,b)     IgnoreLinkError_StrCatW(a,b);
#define StrCpyW(a,b)     IgnoreLinkError_StrCpyW(a,b);
#define StrCpyNW(a,b,c) IgnoreLinkError_StrCpyNW(a,b,c);
#define StrCmpW(a,b)     IgnoreLinkError_StrCmpW(a,b);
#define StrCmpNW(a,b,c) IgnoreLinkError_StrCmpNW(a,b,c);
// header file for my LabView-built DLL (ASCII single-byte character arguments)
#include <MyLibraryHeader.h>
// clean up afterwards, put things back to 'normal'
#undef StrCatW
#undef StrCpyW
#undef StrCpyNW
#undef StrCmpW
#undef StrCmpNW

Similar Messages

How to call labview DLL from C#, passing char, char[], float[], long, short

Hi,
I'm having trouble calling labview dll from C# to perform certain function.
The function supposed to return the values in the float Analysis[] array. However, when I execute it it only returns zero values.
It seems that some parameters are not properly passed to the dll.
Below is the function in the header file:
void __stdcall Optical_Center(char FileDirectory[], long ImagePtr,
    short int Height, short int Width, char ReadFromFile, float Analysis[],
    long lenAnalysis);
and my corresponding dll import in c#:
[DllImport(@"SMIA.dll", CharSet = CharSet.Ansi)]
        public static extern void Optical_Center([MarshalAs(UnmanagedType.LPStr)]string FileDirectory, long ImagePtr,
            short Height, short Width,char ReadFromFile, IntPtr Analysis,
            long lenAnalysis);
string str = @"C:\SMIA.raw";
int len = 3;
long m_lenAnalysis = 3;
long m_ImagePtr = 0;
short m_Height = 2464;
short m_Width = 3280;
IntPtr m_PtrArray = Marshal.AllocHGlobal(len * Marshal.SizeOf(typeof(float)));
char m_ReadFromFile = '1';
Optical_Center(str,m_ImagePtr,m_Height,m_Width,m_ReadFromFile,m_PtrArray,m_lenAnalysis);
float[] m_Analysis = new float[len];
Marshal.Copy(m_PtrArray, floatArray,0,len);
Marshal.FreeHGlobal(m_PtrArray);
string printstr = "";
for (int i=0; i<len; i++)
    printstr = printstr + floatArray[i].ToString() + "\n";
MessageBox.Show(printstr);
Appreciate if anyone can help, thanks.
KL

I was just about to post the header file of the DLL, when
I noticed that there's a function called LVDLLStatus.
This little thingie turned out to be a rather handy tool.
With that function I found that in the DLL I had a problem
with another function that prevented the DLL to be correctly
loaded.
This other function in the DLL is for generating digital output
and it worked as it should, when tested from LV.
Anyway if someone is interested, I got it working by using
the LoadLibrary and GetProcAddress function, as in the
source code thatI posted earlier.
I will investigate what is wrong with that digital output, and
post into a another thread if I have problems with that.

How to call Labview DLL from VB2005

Dear all expert,
I'm a student and very new in Labview programming.
Currently i have build a simple vi and need to convert it to dll so that i can call it from my VB.net. But the problem is how to call the labview dll from my VB.net?
I know we must declare function something like this,
Auto function Bodeplot Lib"..\\Bodeplot.dll" (Byval Val1 as double, Byval Val2 as double,...) as double
but how to determine Val1, Val2 (and so on) is input for which data? if my vi have 10 input (frequency, Kc,Fcz,Fcp,Wzrhp,Wp,k,Wz,Beta and Operation) ? and how to select the output (my application have 3 possible output : magnitup loop,phase loop, and degree loop)
In addition, since I'm using Labview 8.0 , and as i know apllication builder for this version cannot convert vi to dll which contain Mathscript (but unfortunely, my vi all use Mathscript), so really hope someone can help me to convert my vi to dll using Labview 8.2 (which remove this limitation).
here I'm attach my Vi and really hope someone willing to help.
Thank you.
Attachments:
bodeplot.vi ‏1049 KB

On Sep 17, 6:40 am, cckoh <[email protected]> wrote:
> Dear all expert,
> I'm a student and very new in Labview programming.
> Currently i have build a simple vi and need to convert it to dll so that i can call it from my VB.net. But the problem is how to call the labview dll from my VB.net?
>  
> I know we must declare function something like this,
>  
> Auto function Bodeplot Lib"..\\Bodeplot.dll" (Byval Val1 as double, Byval Val2 as double,...) as double
>  
> but how to determine Val1, Val2 (and so on) is input for which data?  if my vi have 10 input (frequency, Kc,Fcz,Fcp,Wzrhp,Wp,k,Wz,Beta and Operation) ? and how to select the output (my application have 3 possible output : magnitup loop,phase loop, and degree loop)
>  
> In addition, since I'm using Labview 8.0 , and as i know apllication  builder for this version cannot convert vi to dll which contain Mathscript (but unfortunely, my vi all use Mathscript), so really hope someone can help me to convert my vi to dll using Labview 8.2 (which remove this limitation).
>  
> here I'm attach my Vi and really hope someone willing to help.
>  
> Thank you.
>  
>
> bodeplot.vi:http://forums.ni.com/attachments/ni/170/272124/1/bodeplot.vi
If you insist on using Labview with your project then you should
consider using ActveX in place of using a dynamic link library to
interface to your VB.net code. You don't need "Application Builder"
if you use ActiveX. The Student, Basic and Full development versions
of Labview for Windows come with ActiveX capability. For more
information on ActiveX look up the subject ActiveX in Labview's Help
File.
Howard

How to call labview DLL from visual C++?

Hi,
I'm trying to call a LV DLL from a VC++ application
by using the LoadLibrary and GetProcAddress functions.
The DLL contains a simple sum function. The Library is
loaded correctly, but the result is always 0.0000.
I have loaded a VC++ DLL in a similar way and it works
correctly. Also, I have tested the DLL by loading it in LV,
and it works correctly. The calling convention is defined
to be stdcall in LV Application Builder.
I have also tried this solution, but I will get a compiler error
from one the header files that are created by the LV when
the DLL is made. The error comes from this line
typedef char                int8;
and the error states that
..\fundtypes.h(107) : error C2371: 'int8' : redefinition; different basic types
If someone knows of newer tutorial(for LV 8.2) or knows how to use those
LoadLibrary and GetProcAddress function for LV DLLs, I will appreciate the
information greatly.
Below is the code that I'm using for loading the LV DLL.
Thanks
#include "stdafx.h"
#include <stdio.h>
#include <stdlib.h>
#include <map>
#include <windows.h>
int _tmain(int argc, _TCHAR* argv[])
    HINSTANCE LVLib = LoadLibrary(TEXT("Testdll"));
    typedef double (__stdcall *MYPROC)(double, double);
    if (LVLib != NULL)
        MYPROC ProcAdd = (MYPROC) GetProcAddress(LVLib, "Add");
        if (ProcAdd != NULL)
            double d = (ProcAdd)(5.5, 6.6);
            printf("sum = %f\n", d);
        else
            printf("Invalid function pointer\n");
    else
        printf("Failed to load the library\n");
    return 0;

I was just about to post the header file of the DLL, when
I noticed that there's a function called LVDLLStatus.
This little thingie turned out to be a rather handy tool.
With that function I found that in the DLL I had a problem
with another function that prevented the DLL to be correctly
loaded.
This other function in the DLL is for generating digital output
and it worked as it should, when tested from LV.
Anyway if someone is interested, I got it working by using
the LoadLibrary and GetProcAddress function, as in the
source code thatI posted earlier.
I will investigate what is wrong with that digital output, and
post into a another thread if I have problems with that.

How to call the DLL writing in Vb6.0 from testsatnd?

Hi,
I want to call a dll writting in VB6.0 from teststand. But as i see from the "Step Setting" in teststand, only the C/C++ Dll can be selected in the "adapter" type. I try to use this one as my adapter to call my VB6.0 dll, in result, there is no function can be seen in the "function" tab in teststand.Anyone know how to call the DLL writing in Vb6.0?
Solved!
Go to Solution.

Hi Ivan,
Just to be sure that your DLL is not wrong
you have check if all functions are well and present.
There is tool called "Dependency Walker" You can download it at http://dependencywalker.com/ .
With it you can look "inside" your dll
If you will see your functions there, you will see them (in my case !!always!!) in TestStand, too.
Hope this helps
Greetings
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

How to call LabVIEW from TestDirector

Hai to all,
I want to call LabVIEW function from TestDirector. That TestDirector using VBScript. is it posible? if posible can you give the procedure.
thanks for advance!
reddy

Hello,
in this case you have to contact Mercury for more informations. There are no experiences in this way from the LV side.
Regards
Thomas D.
NI Germany
(SRQ 204139)

Calling labview VIs from python in Linux

Hello.
I've spent some time searching for this but I haven't found exactly what I was hoping for.
I'm involved in a project that we're starting now and it involves creating a complex software architecture in order to control a robot. This software will need to perform multiple tasks such as interfacing with hardware (which LabView is perfect for) as well as planning and high performance image processing (which LabView isn't as great for).
I was hoping to be able to use a scripting language like python to manage high level stuff (planning, behavior, etc) by calling "subroutines" in other languages such as C++ for the high performance stuff and LabView VIs for the hardware interfacing. I would also like this to run on Linux.
I've found a lot of suggestions on how to call Python scripts from within LabView but this is not what I want. I want exactly the opposite, invoke VIs from Python. I found some information on how to do this on Windows (http://zone.ni.com/devzone/cda/tut/p/id/5719) but this article seems to assume that Windows is being used.
Does anybody have an idea on how to do this?

Unfortunately that's not an option. This is an interdisciplinary school project involving students from engineering (mechanical, electrical and more), computer science and more fields. Some of these students have gotten used to using Labview and this is the main reason I'm trying to accomplish this. I want to have the higher level architecture done in a scripting language such as python which will enable us to create modules in various different environments such as C++ for tasks requiring high performance (image processing for example), Labview for tasks that the people used to using that and even something running on the GPU if there's use for that. Python would make it easy to glue all these components together while maintaining an environment that would make it very easy to configure the whole software system in different ways.
I'd also prefer that this all run on Linux.
The more I look for this the more hopeless I get I'll find anything which is very frustrating. It's a bit hard to believe that Labview doesn't have "python bindings" for running the VIs from within python :-(

Call LabVIEW VIs from MATLAB

Does anybody know of a simple way to call LabVIEW VIs from within a MATLAB m-file? I would like to be able to write VIs in LabVIEW and then script them (for stochastic analysis, etc.), and think MATLAB would be an awfully convenient way to do this (also useful for data analysis, etc.). I have looked at LuaVIEW, but it appears to have been largely abandoned.
Thanks!

Hello Erik,
Building it into a DLL as Altenback said is a solid way to do this, and here's a Knowledge Base article that also explains how to transfer data in binary or ASCII format, How do I Transfer Data Between The MathWorks, Inc. MATLAB® Software Development Environment and LabV...
Thank you,
Deborah Y.
LabVIEW Real-Time Product Marketing Manager
Certified LabVIEW Architect
National Instruments

How to call a dll which has one VISA name as input

Hi there,
The Labview application builder can generate a dll file from a vi which is a simple serial comunication program using VISA name as one control.
The problem is how to call the dll file in Labview which has a VISA name as INPUT?
Thanks!
George

I would suggest modifying the LabVIEW VI so that the input is a string control instead of a visa control. The LabVIEW application will work the same and there is no need for any casting. All visa VIs can take a string as an input. Then when you recreate the dll make the input a string. Then you can easily pass a string to the dll from any API.
-Josh

How to call a form from report? in 6i

How to call a Form from Report? In Developer 6i of oracle. Plz tell me tex.

try this
declare
   AppID PLS_INTEGER;
begin
     AppID := DDE.App_Begin('ifrun60 module=myform.fmx userid=scott/tiger@mydb maximize=no', DDE.App_Mode_Maximized);
exception when others then
      srw.message(1,'Errror');
end;Baig
[My Oracle Blog|http://baigsorcl.blogspot.com/]

How to call a package from the Report in Oracle Application Express

How to call a package from the Report in Oracle Application Express

Hello,
What do you mean? Something like SELECT mypackage.function( par1, par2) from dual?
Or do you want to execute a procedure when something happens on the page, like clicking a button?
Greetings,
Roel
http://roelhartman.blogspot.com/
You can reward this reply by marking it as either Helpful or Correct ;-)

How to call java program from ABAP

Hi Experts,
My requirement is to call java programs from ABAP. For that i have set up SAP JCO connection by using this link http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/739. [original link is broken] [original link is broken] [original link is broken] Connection gets sucessfully. After this how to call java program from ABAP as per our requirement. Please help me out.
Also i tried this way also.. but while executing the DOS Command line appear & disappear in few seconds. So couldnt see the JAVA output. Please help me out to call java programs in ABAP..
DATA:command TYPE string VALUE 'D:Javajdk1.6.0_20 injavac',
parameter TYPE string VALUE 'D:java MyFirstProgram'.
CALL METHOD cl_gui_frontend_services=>execute
EXPORTING
application = command
parameter = parameter
OPERATION = 'OPEN'
EXCEPTIONS
cntl_error = 1
error_no_gui = 2
bad_parameter = 3
file_not_found = 4
path_not_found = 5
file_extension_unknown = 6
error_execute_failed = 7
OTHERS = 8.
Thanks.

This depends on the version of your Netweaver Java AS. If you are running 7.0, you will have to use the Jco framework. The Jco framework is deprecated since 7.1 though. If you want to build a RFC server in 7.1 or higher, it is adviced that you set it up through JRA.
Implement an RFC server in 7.0:
http://help.sap.com/saphelp_nw04/helpdata/en/6a/82343ecc7f892ee10000000a114084/frameset.htm
Implement an RFC server in 7.1 or higher:
http://help.sap.com/saphelp_nwce72/helpdata/en/43/fd063b1f497063e10000000a1553f6/frameset.htm

How to call WEB Service From SAP

Hi Friends,
How to call WEB Service From SAP.
Thanks in advance,
Murali Krishna K

Hi,
if you mean calling a web service in Web Dynpro ABAP, see the <a href="http://help.sap.com/saphelp_nw70/helpdata/en/d7/951b42f828df2ce10000000a1550b0/frameset.htm">documentation</a>, if you mean calling a web service in general, this is not the correct forum. This here is the Web Dynpro ABAP forum, for general questions on ABAP, use the ABAP forum.
Regards, Heidi

How TO CALL c++ EXECUTABLE FROM XI(VERY iMPORTANT)

hI ALL
pLEASE DO GIVE SUGGESTIONS AND DOCCUMENTATION LINKS THAT <b>HOW TO CALL c++ EXECUTABLE FROM XI</b> .THIS IS VERY IMPORTANT AND YOUR HELP WILL BE REWARDED.
WITH REGARDS
SUBRATO KUNDU

Hi Subrato,
AFAIK you can call C / C++ methods in Java using Java Native Interface (JNI).
Please refer the following links for how to do the same.
<a href="http://www.nag.com/IndustryArticles/CallingCLibraryRoutinesfromJava.pdf">For C:</a>
<a href="http://www.javaworld.com/javaworld/javatips/jw-javatip17.html">For C++:</a>
Regards,
Ananth

HOW TO CALL A FORM FROM ANOTHER FORM

HOW TO CALL A FORM FROM ANOTHER FORM [local machine]

Balraj wrote:
HOW TO CALL A FORM FROM ANOTHER FORM [local machine]The way you asked question is this bit of request or order?
Secondly, you used capital latters which are being treated as Shouting Language. So, always try to switch off the Capslock of your keyboard.
Thirdly, you are very lazy to serach on forum or google for your problem instead of waiting someone to anwer your question.
Your should seriously have a look at FAQ.
http://wikis.sun.com/display/Forums/Forums+FAQ
Also here.
http://www.catb.org/~esr/faqs/smart-questions.html
Please read documentation for the initial questions.
-Ammad

How to call LabVIEW dll from ATL COM dll

Similar Messages

Maybe you are looking for