How to call next .swf and close the previous?
Hi guys,
i'm having a big trouble using the loadMovie command.
I want to do a book and at the end of each chapter the next button will appoint to the next .swf ,but the previous has to disappear.
At moment, i created a empty movieclip named "load" in ALL .flv files ..he stands for all the time line. But when i advance to the next swf, it loads above the previous file, accumulating the files one above the other.
Here is the AS what i'm using in the last frame of my flv:
stop();
next_btn.onRelease = function(){
loadMovie("next_file.swf",load);
prev_btn.onRelease = function(){
gotoAndStop(previous_page_frame)
So.. all i want to do is create a sequence: file 1 calls file 2 and close file 1
..and have the option to return to the previous file when i want: in the first frame of the file 2, the previous button will appoint to the file 1.
Any ideas? Thanks so much
yes.
you would need to use preloader code (ie, start a loop like enterframe and check the _framesloaded property of the load-target movieclip) to ensure the needed frame is loaded and then use a goto applied to the load-target movieclip.
however, there's no way to do that if you continue to use code like this.loadMovie().
Similar Messages
-
How to call sub VI and close the main VI in while loop and sequence condition
Hiya,
I have a problem with the while loop and the sequential condition in placed together i.e while loop as Global and sequential condition as local (i.e inside the Global loop). For example,when calling the sub vi from the main vi (main vi as main menu and sub vi as sub menu.)My problem is I can't run my sub menu when the particular icon is pressed through the main menu and only the front panel appears. My concerned was if possible the sub menu is activated in few second then jump back to the main menu again (analyze through the diagram).So, I don't know what should I need to do. If possible, please advice me how to encountered that particular problem.
Thanks!Go to your block diagram of your main menu, then click on the "Hightlight Execution" it is something like a bulb. then you execute your vi. then LV will show you all your data flow.
When you feel sad, laugh -
I downloaded the latest iTunes software update and it properly installed. But, I cannot close the update window showing it was completed and the blue completion bar is full but cannot cancel or close it either. Any ideas on how to clear that out and close the window. Tried to quit on both the big window and the software update title in the menu bar. No luck.
Tried that by shutting down via the power button only as the normal shutdown was nixed by the open window issue. It did not help. Found a very similar question in the discussions and it recommended "Force Quit". That worked and the update works normal and the window is gone. Thanks!
-
How to open an URL and close the URL window, using adobe javascript
Hi,
Is it possible to open an URL and close the URL back again(without allowing the user to perform any other operation)? I was able to acheive the opening of the URL, using the app.launchURL("address". true); - But here it lauches in new window, and how do i close the window using the javascript. Is it possible?
Thanks.Hi all
In addition to what Bobby W - Adobe TS added, you might find
the following useful as a bypass or workaround to the pesky prompt.
var pw=window.parent;pw.opener=window.self;window.open("
http://www.adobe.com");
pw.close();
I think this will only work for IE browsers. Actually, I
think the whole window.close() only works for IE, but could be
wrong about that.
Cheers... Rick -
I have purchased a movie and downloaded it. Next I get a screen that says Terms and Conditions and tells me to read and click on Agree. I cannot find the Agree anywhere in the document. How do I move on and view the movie?
Go to Settings>General>Usage. How much space does it show you have?
If you connect your phone to your computer, what does iTunes say is on your phone? Do you see a large amount of "Other"? If so, you may have a corrupted database. You'll need to sync your phone then restore it as NEW (not from back up) then re-sync your data). -
I in have a product registered an old account, how do i move it to a new account and close the old one?
COntact support by web chat.
Mylenium -
Updating ipod touch to os5.1 got an error message "cannot connect the ipod touch because the pairing record is missing" don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box. Any ideas?
#1
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
#1.1 n/a because the errror message overrides it
#2 see #1
#3 iOS: Device not recognized in iTunes for Mac OS X
But could be caused by #1
#4 Covered by previous ones
#5 Obvious jpegs are photos and thus will not sync as videos. Also see:
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
iTunes: Frequently asked questions about viewing and syncing videos
#6 iOS: If you can't back up or restore from a backup in iTunes
First #7 See #6
Second #7 You have so many other problems resolve those first
#8 Resolve other problems first -
How to Post and Close the Period ?
Master,
I have Problem in <b><u>MB1C</u></b>, as Posting Period Problem .
Give me Solution.Check the transactions :
MMRV : For this transaction, enter the company code. The t-code would give you information as to the period in which the posting can happen. Also, one can set if posting is to be allowed in the previous period.
MMPV: For this transaction, enter the company code and the period/year or the current date. The transaction would close the previous period and open the period with the current date. Though in case the period to be closed is older than one month, the subsequent periods need to be closed before the period with current date can be open.
Example: Say the last period open is 01st Oct 2006, the current date is 29th Jan 2007 and the period for the company is set as months. The steps to be followed are as follow:
1. close the period for the month of Nov.
2. Close the period for the month of Dec
3. lastly, open the period for the month of Jan 2007.
Regards,
Gauravjit.
Reward points if the solution is helpful -
The hinge makes a clicking sound at the right corner as i open and close the lid
I bought my Mac 2 weeks ago and The hinge makes a clicking sound at the right corner as i open and close the lid. Someone help me out Please
At the bottom of this page click
Then on the right side of the next page click
On the next page click
Select a topic
Select Other Topics then Hardware not working as expected
Finally, provide your contact information and Apple will call you! -
How do I eliminate this glitch? Music spontaneously starts, stops, stutters at random and I'm not even using that app. Repeated attempts to pause the song and close the app have no affect. Just keeps popping on and off randomly no matter what I'm doing at the time. I tried double-clicking the Home button which brings up all of the active apps, touched and held the Music icon until all the icons started wiggling, tapped the Close icon in the upper left corner of the Music app to close the app completely, but the app is still open and still randomly stuttering. I did notice that the play button icon flashes in the upper right corner of the screen when this happens and it appears and disappears in concurrence with the Music app stuttering. When the music starts, the icon appears and when it stops, the icon disappears again. When the music stutters on and off, the icon appears and disappears rapidly and in sync with that random glitch. This just started today for no apparent reason. I turned the iPad off, waited 30 seconds and turned it back on. As soon as it was finished starting up, the same music glitch began again immediately. I'm using iOS 6.1.3.
Well, no one seems to have any answers or ideas for me, I'll update what I've been able to accomplish.
I reloaded all 14 disks in the time frame of watching Lord of the Rings on Fri. nite.
Funny thing is, the first disk pulled the info from the online store! Hooray!
Wait-then all the next 13 could find no information online...what the heck is up with that? So I MANUALLY assign each disk a new track # to co-inside with each disk, spent about 2 hours doing that.
But still, itunes tells me my playlist is too large, there's not enough space on the ipod. so I unchecked 1 1/2 disks (I'd listen to 1/2 of disk 1 previously) and voila! there's my ipod full of my book. Finally. But what a lot of bother just to keep things in order! -
Unable to load next swf file in the browser.
Hi,
Im facing problem while loading the next swf file in the
browser.
I have divided my files and named it as 1.swf, 2.swf, and so
on and i wrote the script 4 calling next swf.
It is working when i called thru HTML in local system. When i
upload into my server and called thru php, next file is not
loading.
Code in the button : :
on (release)
{ loadMovie("2.swf", 0);
Any ideas or suggestion?
Help would be appreciated.
thnq.I'd suggest looking that these notes
1045941 - HTTP Client: Incorrect request URI II
Note 1144511 - Blank screen when starting CRM WebClient or IC WebClient
1244321 - Simplifying error analysis in CRM WebClient UI
1242835 - IDES CRM 2007
1168941 - Simplifying system setup
612670 - SSO for local BSP calls using SAP GUI HTML Control -
Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected] -
How do I turn off and on the icon size slider bar at the lower right status bar of a folder window.
I have been trying for days to help a friend with a new iMac to turn on the icon size slider bar that on my iMac appears at the bottom of ever folder when it is open when in the "view" > "icon" mode. I cannot find anything that discusses this slider bar. I can turn this status bar off and on on both my machine and my friends machine, but I cannot turn off or on the slider on either machine.
This did not help. I am a Mac User since 1984 and generally I am never stymied buy the Mac OS, but this one has me. I can open and close the lower status bar, as you described, and that works fine for me because I have the icon slider bar already there and it works fine; however when I open the lower status bar on my friends machine there is no icon size slider bar, and I can't seem to find out how to get it there, as it is on my machine or at all. The icon size can be controlled from the View menu, but as a photographer, it is really handy to have it at the bottom of the folder window. Thanks for trying.
-
When I access my google e-mail account on the I-pad my inbox has at least 6 e-mails with no sender and no subject (absent via I-phone, Mac or PC) I cannot delete them as they cannot be selected- how do I stop them and clear the ones there now?
Try turning the account off and on : Settings > Mail, Contacts, Calendars , then tap the account on the right, slide Mail to 'off', exit settings and go back into the Mail app, and then go back to Settings and slide Mail back to 'on'
If that doesn't work then try closing the Mail app completely : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
Also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
I bought an iTune gift card for myself and sent it to my e-mail address. I have waited over an hour and the e-mail showing the gift card has not arrived. How do I find it and get the credit put into my iTunes account so that I can buy some music?
Oh hold on - sudden development!
I panicked and force-shut down my computer because it froze after I clicked on the 'Reset Cache' option, then I logged back on and noticed the Cloud symbol next to the missing song. I clicked it, and it's finally downloaded properly! <3
Mate, thank you so much for helping me out! xxx
Maybe you are looking for
-
How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat. We h
-
Photos not appearing in ios apps
In apps on iOS 8.3 when I want to select a photo from my library I only have accessible a limited number of folders of pictures. In the Facebook app I only have the Camera Roll available, and in Instagram there is only Camera Roll and a number of Fac
-
Hi, I have a problem with creating a special query in Query Designer. The query has 2 structures, one structure has 100 selections, the second structure has 132 selections. This query is to show 10 years of plan data per period and a detailed account
-
Solaris support booting from san ?
Does anyone know if Solaris 10 supports booting from a san fabric lun ? In particular, an IBM DS4800. The installer doesn't see the luns when it comes time to choose a disk to install on, only the internal disks. The server is a IBM LS20 blade. I've
-
Unable to Access Dashboard Builer
We have a new install of BO XI 3.0 on a Windows 2003 Server with 5 named user licenses (BOE 3.0 Pro for QRA). The install went flawlessly and we have no issues with generating and viewing reports. However, we also purchased 5 named user licenses for