How to call the Table Valueset in another Table Valueset

Hi Friends ,
I have one requirement let me explain you the scenario.
in one segment of the Keyflex filed i need to get the all the grades of the business. which i did using the table valueset.
now in another segment of the kff, i need to get all the grade steps depending on the selected grade.
like if i have a grades say G1,G2,G3,G4...........
and grade steps
for G1-steps(1,2,3,4,5,6)
for G2-steps(1,2,3,4)
for G3-steps(1,2,3)
for G4-(1,2,)
etc.
Now my requirement is if the user select the grade G1 from the valueset. then in the next filed of the segment should come only those steps which are valid for that grade.
i hope i have given clear pic of my requirement can anyone please help me out, how to proceed for this.
thanks in advance.

Hi Manoj,
Pls follow Metalink Note: How To Create Value Sets Where One Segment Is Dependent On The Previous Segment Selection? [ID 818624.1]
Regards,
Sujoy

Similar Messages

  • How to update the table value in the valuechange event?

    I have an input field in the datatable with the valueChangeListener
    <rich:dataTable id="cart" value="#{cart.cartList}" var="item">
    <h:inputText value="#{item.cost}" id="qty" valueChangeListener="#{items.updateCost}" onchange="submit()">
    <h:outputText value="#{item.errorMsg}"> </h:outputText>
    in the backing bean
         Item item = (Item) model.getRowData();
    // do some update, if the cost too larger, change to max_cost
         item.setCost(max_cost);
         item.setErrorMsg("Error Msg");
    After calling the valuechange method, the screen output doesn't update the cost.
    How to update the table value in the valuechange event?

    As you're misusing the valueChangeListener to set another input field, you need to skip the update model values phase. Otherwise the value set in the valueChangeListener will be overridden by the submitted value. You can do this by calling the FacesContext#renderResponse() inside the valueChangeListener method. This will shift the current phase immediately to the render response phase, hereby skipping the update model values and invoke application phases.

  • How to set the table input in Query template?

    Hi all.
    I need to call a Bapi_objcl_change, with import parameter and a table as an input. I have done this, in BLS. I have set the table input in the
    form of xml. In BLS, I get the output(the value gets change in SAP R3, what i have given in BLS).  But if i set the same xml structure  in
    query template, I didn't get the output. Table input parameter does not take that xml source.  How to set the table input in Query template?
    can anyone help me?
    Regards,
    Hemalatha

    Hema,
    You probably need to XML encode the data so that it will pass properly and then xmldecode() it to set the BAPI input value.
    Sam

  • How to get the table of value field? and can we expand the technical limits

    Dear
    I have created value field in COPA with KEA6. And now, I need the table which the value fields are saved. Yet, I have tried a lot to find it and get failure? Can any guy help me? Please tell me how to get the table of a value field.
    And another question is that, can we extend the technical limits for the number of value field for ECC6.0?
    We have a note for R.4.x Please see below:
    OSS note 160892
    You can display the length of a data record using Transaction KEA0 ('Maintain Operating Concern'). After you have navigated to the 'Characteristics Screen' or to the 'Value field Screen' choose menu path 'Extras -> Technical Limits'.
    The maximum displayed here under 'Length in bytes on the DB' is the maximum length permitted by the Dictionary. The reserve required for the release upgrade must be subtracted from this value.
    To increase the allowed number of the value fields, increase the value that is assigned to field ikcge-bas_max_cnt (FORM init_ikcge_ke USING fm_subrc, approx. line 165) in Include FKCGNF20. It specifies the number of the possible value fields. The corresponding part of the source code is attached to the note as a correction.
    David Sun
    Regards!

    how to extend the limit of value numbers? please see the original question.

  • How to call a Java class from another java class ??

    Hi ..... can somebody plz tell me
    How to call a Java Class from another Java Class assuming both in the same Package??
    I want to call the entire Java Class  (not any specific method only........I want all the functionalities of that class)
    Please provide me some slotuions!!
    Waiting for some fast replies!!
    Regards
    Smita Mohanty

    Hi Smita,
    you just need to create an object of that class,thats it. Then you will be able to execute each and every method.
    e.g.
    you have developed A.java and B.java, both are in same package.
    in implementaion of B.java
    class B
                A obj = new A();
                 //to access A's methods
                 A.method();
                // to access A's variable
                //either
               A.variable= value.
               //or
               A.setvariable() or A.getvariable()

  • How to call a exec prog in another prog

    how to call a exec prog in another prog.

    Hi,
    SUBMIT
    Basic forms:
    1. SUBMIT rep.
    2. SUBMIT (name).
    Additions:
    1. ... LINE-SIZE col
    2. ... LINE-COUNT line
    3. ... TO SAP-SPOOL List output to the SAP spool database
    4. ... USING SELECTION-SCREEN scr
    5. ... VIA SELECTION-SCREEN
    6. ... AND RETURN
    7. ... EXPORTING LIST TO MEMORY
    8. ... USER user VIA JOB job NUMBER n
    9. ...Various additions for passing parameters to rep
    10. ... USING SELECTION-SETS OF PROGRAM prog
    Effect
    Calls report rep.
    Regards,
    Andrej.

  • How to call the second mapping in the first mapping fails in the BPM

    Hi All,
    I have a scenario like this.
    There are two mappings. There is a one condition while genearying the root element of the first mapping. If this condition is not satisfies the first mapping will fail. If this mapping fails i want to trigger another mapping.
    How to achieve this functionality.
    If it is possible with BPM. how to call the second mapping in the BPM.

    Hi
    you can not create the containter for the synchronous interfaces.
    you have to craete the two asysnchronous abstact interfaces .
    thenusing those two abstract interfaces you have to define the containers in the BPM.
    and you also have to define the interface mapping b/w those two abstract interfaces.
    once you define the interface mapping you will be able to select the interface mapping using the transformation step in BPM.
    once you select the interface mapping in BPM then you will be able to selece the interfaces
    if you still face the problenm please reply me back.
    Thanks
    Rinku Gangwnau

  • How to check the tables we have created in JDBC??

    I have created a table called COFFEE2 in a datasource called temp which is in SQL server...How to check the table values??
    i went into administrative tools and odbc cource then i could see the data source i have created but how to see the table??
    Can anyone help??
    thanx

    Hmm.. not sure that I understand the problem.
    Call getConnection on the DataSource, and then execute the select query on the connection.
    Kaj

  • How to call the Report program into Function module

    Hi Experts,
    Actually I want to create the DataSource. But I have only the ALV report program. I need to create function module but I don’t know how to call the ALV report program using in function module  
    So could you please any one send the Document or step by step method?
    Advance Thanks,
    Sathis

    If the report is just based out of a table than create a Generic Extractor using View.
    If its an InfoSet query than create a Generic Extractor on that InfoSet.
    If its an ABAP report than create a Generic Extractor using FM
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33

  • How to call the Application configuration in run time.

    hi guru,
    i have created two  Application configuraton   and it working fine.
    my question how to call the application configuration in run time.
    Example :
    Based on the user i want to change the Application Configuration.like Super user and Normal user.
    Advance thank's
    Regard's
    Vivekanathan.S

    Hi,
    Please try out this way-
    Have a look at this table -
    WDY_CONF_APPLU - (Customizing Data for Web Dynpro Applications).
    after you are done with the configuration--
    Ge the config id for the given application from this table. And depending on the user get an entry from this table and display accordingly.
    Please refer to these links -
    different default layouts for different CONFIG_IDs
    Get WDCONFIGURATIONID
    Regards
    Lekha

  • How to call the Standard Program in our ZPROGRAM?

    Hi Frieds can you tell me the procedure how to call the Standard program
    in z----
    program and we have to get the data from standard one to our customer program.
    Thanks in advance,
    madan mohan.

    Hi,
    *Submit report but export resultant list to memory, rather than
    *it being displayed on screen
    SUBMIT zreport EXPORTING LIST TO MEMORY.
    Once report has finished and control has returned to calling
    program, use function modules LIST_FROM_MEMORY, WRITE_LIST and
    DISPLAY_LIST to retrieve and display report.
    *Example Code (Retrieving list from memory)
    DATA  BEGIN OF itab_list OCCURS 0.
            INCLUDE STRUCTURE abaplist.
    DATA  END OF itab_list.
    DATA: BEGIN OF vlist OCCURS 0,
            filler1(01)   TYPE c,
            field1(06)    TYPE c,
            filler(08)    TYPE c,
            field2(10)    TYPE c,
            filler3(01)   TYPE c,
            field3(10)    TYPE c,
            filler4(01)   TYPE c,
            field4(3)     TYPE c,
            filler5(02)   TYPE c,
            field5(15)    TYPE c,
            filler6(02)   TYPE c,
            field6(30)    TYPE c,
            filler7(43)   TYPE c,
            field7(10)    TYPE c,
          END OF vlist.
    SUBMIT zreport EXPORTING LIST TO MEMORY.
    CALL FUNCTION 'LIST_FROM_MEMORY'
      TABLES
        listobject = itab_list
      EXCEPTIONS
        not_found  = 4
        OTHERS     = 8.
    CALL FUNCTION 'LIST_TO_ASCI'
      EXPORTING
        list_index         = -1
      TABLES
        listasci           = vlist
        listobject         = itab_list
      EXCEPTIONS
        empty_list         = 1
        list_index_invalid = 2
        OTHERS             = 3.
    IF sy-subrc NE '0'.
      WRITE:/ 'LIST_TO_ASCI error !! ', sy-subrc.
    ENDIF.
    Regards
    Sudheer

  • How to call the secured EJB from timer ejb timedout method.

    Hi All,
    I have a couple of questions on EJB 3.1 Timer Service.
    1. How to call the secured EJB (annotated @RolesAllowed) from Timer EJB @Timeout Method?
    2. What's the default role/principal with which the Timer @Timeout Method gets called?
    Please let me know any info regarding the same.
    Thanks,
    Suresh

    I'd start here:
    http://ant.apache.org/manual/index.html
    If that doesn't help, go to the table of contents and start poking around. You don't need to read the whole thing front to back, but if you're not willing to spend some time researching and reading, you're not going to get very far.

  • How to refresh the table control on some action

    Hi All,
         In a web Dynpro application, I am filling data to the Table control through Supply function. When  I do some action (like save new record )  i want to refresh the table control means add the newly added record.
       How to refresh the Table control.
    Thanks
    Hemalatha

    hi hema........
        if you are using a select query inside the supply function...
        then...
        you can just use node->invalidate(). method..
        it just invalidates the node that is bound to the table.
       so the supply function will be called again, which again uses the select query to fetch the values.. so that your table gets refreshed.
    ---regards,
       alex b justin

  • How to clear the table control content

    Hi All,
    I am doing BDC for cost estimate change. In this the transaction KKPB contains table control. So when ever i process with particular cost estimate, i need to fill the table control with the values. Here when i am doing the BDC for change, i need to clear all the contents of the table control then i need to fill with new entries.
    So my problems is how to clear the table control entriee?? please help me in this??
    Many Thanks,
    Raghu.

    Hi this might help u.
    Check the below link.
    http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
    THis is example to upload the Bank details of the Vendor which has the TC.
    REPORT zprataptable2
           NO STANDARD PAGE HEADING LINE-SIZE 255.
    DATA : BEGIN OF itab OCCURS 0,
            i1 TYPE i,
            lifnr LIKE   rf02k-lifnr,
            bukrs LIKE   rf02k-bukrs,
            ekorg LIKE   rf02k-ekorg,
            ktokk LIKE   rf02k-ktokk,
            anred LIKE lfa1-anred,
            name1 LIKE lfa1-name1,
            sortl LIKE lfa1-sortl,
            land1 LIKE lfa1-land1,
            akont LIKE lfb1-akont,
            fdgrv LIKE lfb1-fdgrv,
             waers LIKE lfm1-waers,
            END OF itab.
    DATA : BEGIN OF jtab OCCURS 0,
            j1 TYPE i,
            banks LIKE lfbk-banks,
            bankl LIKE lfbk-bankl,
            bankn LIKE lfbk-bankn,
             END OF jtab.
    DATA : cnt(4) TYPE n.
    DATA : fdt(20) TYPE c.
    DATA : c TYPE i.
    INCLUDE bdcrecx1.
    START-OF-SELECTION.
      CALL FUNCTION 'WS_UPLOAD'
        EXPORTING
          filename = 'C:\first1.txt'
          filetype = 'DAT'
        TABLES
          data_tab = itab.
      CALL FUNCTION 'WS_UPLOAD'
       EXPORTING
         filename                      = 'C:\second.txt'
         filetype                      = 'DAT'
        TABLES
          data_tab                      = jtab.
      LOOP AT itab.
        PERFORM bdc_dynpro      USING 'SAPMF02K' '0100'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'RF02K-KTOKK'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
        PERFORM bdc_field       USING 'RF02K-LIFNR'
                                      itab-lifnr.
        PERFORM bdc_field       USING 'RF02K-BUKRS'
                                      itab-bukrs.
        PERFORM bdc_field       USING 'RF02K-EKORG'
                                       itab-ekorg.
        PERFORM bdc_field       USING 'RF02K-KTOKK'
                                       itab-ktokk.
        PERFORM bdc_dynpro      USING 'SAPMF02K' '0110'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'LFA1-LAND1'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
        PERFORM bdc_field       USING 'LFA1-ANRED'
                                      itab-anred.
        PERFORM bdc_field       USING 'LFA1-NAME1'
                                      itab-name1.
        PERFORM bdc_field       USING 'LFA1-SORTL'
                                      itab-sortl.
        PERFORM bdc_field       USING 'LFA1-LAND1'
                                      itab-land1.
        PERFORM bdc_dynpro      USING 'SAPMF02K' '0120'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'LFA1-KUNNR'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
        PERFORM bdc_dynpro      USING 'SAPMF02K' '0130'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'LFBK-BANKN(01)'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '=ENTR'.
        cnt = 0.
        LOOP AT jtab WHERE j1 = itab-i1.
          cnt = cnt + 1.
          CONCATENATE 'LFBK-BANKS(' cnt ')' INTO fdt.
          PERFORM bdc_field  USING fdt jtab-banks.
          CONCATENATE 'LFBK-BANKL(' cnt ')' INTO fdt.
          PERFORM bdc_field USING fdt jtab-bankl.
          CONCATENATE 'LFBK-BANKN(' cnt ')' INTO fdt.
          PERFORM bdc_field   USING fdt jtab-bankn.
          IF cnt = 5.
            cnt = 0.
            PERFORM bdc_dynpro      USING 'SAPMF02K' '0130'.
            PERFORM bdc_field       USING 'BDC_CURSOR'
                                          'LFBK-BANKS(01)'.
            PERFORM bdc_field       USING 'BDC_OKCODE'
                                          '=P+'.
            PERFORM bdc_dynpro      USING 'SAPMF02K' '0130'.
            PERFORM bdc_field       USING 'BDC_CURSOR'
                                          'LFBK-BANKN(02)'.
            PERFORM bdc_field       USING 'BDC_OKCODE'
                                          '=ENTR'.
          ENDIF.
        ENDLOOP.
        PERFORM bdc_dynpro      USING 'SAPMF02K' '0130'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'LFBK-BANKS(01)'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '=ENTR'.
        PERFORM bdc_dynpro      USING 'SAPMF02K' '0210'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'LFB1-FDGRV'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
        PERFORM bdc_field       USING 'LFB1-AKONT'
                                      itab-akont.
        PERFORM bdc_field       USING 'LFB1-FDGRV'
                                      itab-fdgrv.
        PERFORM bdc_dynpro      USING 'SAPMF02K' '0215'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'LFB1-ZTERM'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
        PERFORM bdc_dynpro      USING 'SAPMF02K' '0220'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'LFB5-MAHNA'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
        PERFORM bdc_dynpro      USING 'SAPMF02K' '0310'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'LFM1-WAERS'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
        PERFORM bdc_field       USING 'LFM1-WAERS'
                                      itab-waers.
        PERFORM bdc_dynpro      USING 'SAPMF02K' '0320'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'RF02K-LIFNR'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '=ENTR'.
        PERFORM bdc_dynpro      USING 'SAPLSPO1' '0300'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '=YES'.
        PERFORM bdc_transaction USING 'XK01'.
      ENDLOOP.
      PERFORM close_group.
    Header file:
    1     63190      0001     0001     0001     mr     bal188     b     in     31000     a1     inr
    2     63191      0001     0001     0001     mr     bal189     b     in     31000     a1     inr
    TC file:
    1     in     sb     11000
    1     in     sb     12000
    1     in     sb     13000
    1     in     sb     14000
    1     in     sb     15000
    1     in     sb     16000
    1     in     sb     17000
    1     in     sb     18000
    1     in     sb     19000
    1     in     sb     20000
    1     in     sb     21000
    1     in     sb     22000
    2     in     sb     21000
    2     in     sb     22000
    REPORT zmm_pr_upload_mat
           NO STANDARD PAGE HEADING
           LINE-SIZE 255.
    Standard Include for Selection Screen
    INCLUDE bdcrecx1.
    Internal Table for Upload Data
    DATA: BEGIN OF i_pr OCCURS 0,
    Header Screen
            sno(3),               " SNo
            bsart(004),           " PR Type
            epstp(001),           " Item Category
            knttp(001),           " Account Assignment
            eeind(010),           " Delivery Date
           lpein(001),          " Category of Del Date
            werks(004),           " Plant
            lgort(004),           " Storage Location
            ekgrp(003),           " Purchasing Group
            matkl(009),           " Material Group
            bednr(010),           " Tracking No
            afnam(012),            " Requisitioner
    Item Details
            matnr(018),           " Material No
            menge(017),           " Quantity
           badat(010),
           frgdt(010),
            preis(014),           " Valuation Price
           waers(005),           " Currency
           peinh(005),
           wepos(001),
           repos(001),
            sakto(010),           " GL Account
            kostl(010),           " Cost Center
           bnfpo(005),
          END OF i_pr.
    Internal Table for header Data
    DATA: BEGIN OF it_header OCCURS 0,
            sno(3),               " SNo
            bsart(004),           " PR Type
            epstp(001),           " Item Category
            knttp(001),           " Account Assignment
            eeind(010),           " Delivery Date
            werks(004),           " Plant
            lgort(004),           " Storage Location
            ekgrp(003),           " Purchasing Group
            matkl(009),           " Material Group
            bednr(010),           " Tracking No
            afnam(012),            " Requisitioner
          END OF it_header.
    Internal Table for Item Data
    DATA: BEGIN OF it_item OCCURS 0,
            sno(3),               " SNo
            matnr(018),           " Material No
            menge(017),           " Quantity
            preis(014),           " Valuation Price
            sakto(010),           " GL Account
            kostl(010),           " Cost Center
          END OF it_item.
    Data Variables & Constants
    CONSTANTS : c_x             VALUE 'X'.  " Flag
    DATA : v_l(2),                          " Counter
           v_rowno(5),                      " Row No
           v_2(2),                          " Counter
           v_rows LIKE sy-srows,            " Rows in TC
           v_field(45).                     " String
    Parameters
    PARAMETERS: p_file LIKE ibipparms-path.  " Filename
    At selection-screen on Value Request for file Name
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
    Get the F4 Values for the File
      CALL FUNCTION 'F4_FILENAME'
        EXPORTING
          program_name  = syst-cprog
          dynpro_number = syst-dynnr
        IMPORTING
          file_name     = p_file.
    Start of Selection
    START-OF-SELECTION.
    Open the BDC Session
      PERFORM open_group.
    Upload the File into internal Table
      CALL FUNCTION 'UPLOAD'
        EXPORTING
          filename                = p_file
          filetype                = 'DAT'
        TABLES
          data_tab                = i_pr
        EXCEPTIONS
          conversion_error        = 1
          invalid_table_width     = 2
          invalid_type            = 3
          no_batch                = 4
          unknown_error           = 5
          gui_refuse_filetransfer = 6
          OTHERS                  = 7.
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      SORT i_pr BY sno.
      LOOP AT i_pr.
        MOVE-CORRESPONDING i_pr TO it_item.
        APPEND it_item.
        CLEAR it_item.
        AT END OF sno.
          READ TABLE i_pr INDEX sy-tabix.
          MOVE-CORRESPONDING i_pr TO it_header.
          APPEND it_header.
          CLEAR it_header.
        ENDAT.
      ENDLOOP.
      SORT it_header BY sno.
      SORT it_item BY sno.
      v_rows = sy-srows - 6.
    Upload the Data from Internal Table
      LOOP AT it_header.
    Header Data
        PERFORM bdc_dynpro      USING 'SAPMM06B' '0100'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'EBAN-BEDNR'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
        PERFORM bdc_field       USING 'EBAN-BSART'
                                      it_header-bsart.
        PERFORM bdc_field       USING 'RM06B-EPSTP'
                                      it_header-epstp.
        PERFORM bdc_field       USING 'EBAN-KNTTP'
                                      it_header-knttp.
        PERFORM bdc_field       USING 'RM06B-EEIND'
                                      it_header-eeind.
       PERFORM bdc_field       USING 'RM06B-LPEIN'
                                     it_header-lpein.
        PERFORM bdc_field       USING 'EBAN-WERKS'
                                      it_header-werks.
        PERFORM bdc_field       USING 'EBAN-LGORT'
                                      it_header-lgort.
        PERFORM bdc_field       USING 'EBAN-EKGRP'
                                      it_header-ekgrp.
        PERFORM bdc_field       USING 'EBAN-MATKL'
                                      it_header-matkl.
        PERFORM bdc_field       USING 'EBAN-BEDNR'
                                      it_header-bednr.
        PERFORM bdc_field       USING 'EBAN-AFNAM'
                                      it_header-afnam.
    Item Details
        v_l = 0.
    To add no. of rows
        v_2 = 0 .
    As the screen is showing 13 rows defaulted to 130
        v_rowno = 130 .
        LOOP AT it_item WHERE sno = it_header-sno.
          v_l = v_l + 1.
          IF v_l = 14 .
            IF v_2 = 12 .
              v_2 = 12 .
              v_l = 2 .
    From second time onwards it is displaying 12 rows only
              v_rowno = v_rowno + 120 .
              PERFORM bdc_dynpro      USING 'SAPMM06B' '0106'.
              PERFORM bdc_field       USING 'BDC_CURSOR'
                                            'RM06B-BNFPO'.
              PERFORM bdc_field       USING 'RM06B-BNFPO'
                                            v_rowno.
              PERFORM bdc_field       USING 'BDC_OKCODE'
                                            '/00'.
              PERFORM bdc_field       USING 'BDC_OKCODE'
                                                '/00'.
            ELSE.
    V_2 initialized to 12 for second screen purpose
              v_2 = 12 .
              v_l = 2 .
              PERFORM bdc_dynpro      USING 'SAPMM06B' '0106'.
              PERFORM bdc_field       USING 'BDC_CURSOR'
                                            'RM06B-BNFPO'.
              PERFORM bdc_field       USING 'RM06B-BNFPO'
                                            v_rowno .
              PERFORM bdc_field       USING 'BDC_OKCODE'
                                            '/00'.
              PERFORM bdc_field       USING 'BDC_OKCODE'
                                                '/00'.
            ENDIF.
          ENDIF.
          PERFORM bdc_dynpro      USING 'SAPMM06B' '0106'.
          PERFORM bdc_field       USING 'BDC_OKCODE'
                                        '/00'.
          CLEAR v_field.
          CONCATENATE 'EBAN-MATNR(' v_l ')' INTO v_field.
          PERFORM bdc_field   USING v_field it_item-matnr.
          CLEAR v_field.
          CONCATENATE 'EBAN-MENGE(' v_l ')' INTO v_field.
          PERFORM bdc_field   USING v_field it_item-menge.
          PERFORM bdc_dynpro      USING 'SAPMM06B' '0102'.
          PERFORM bdc_field       USING 'BDC_CURSOR'
                                        'EBAN-PREIS'.
          PERFORM bdc_field       USING 'BDC_OKCODE'
                                        '/00'.
          PERFORM bdc_field       USING 'EBAN-PREIS'
                                      it_item-preis.
          PERFORM bdc_dynpro      USING 'SAPMM06B' '0505'.
          PERFORM bdc_field       USING 'BDC_CURSOR'
                                        'EBKN-SAKTO'.
          PERFORM bdc_field       USING 'BDC_OKCODE'
                                        '=ENTE'.
          PERFORM bdc_field       USING 'EBKN-SAKTO'
                                      it_item-sakto.
    Cost Center
          PERFORM bdc_dynpro      USING 'SAPLKACB' '0002'.
          PERFORM bdc_field       USING 'BDC_CURSOR'
                                        'COBL-KOSTL'.
          PERFORM bdc_field       USING 'BDC_OKCODE'
                                        '=ENTE'.
          PERFORM bdc_field       USING 'COBL-KOSTL'
                                        it_item-kostl.
          PERFORM bdc_field       USING 'BDC_OKCODE'
                                        '=ENTE'.
        ENDLOOP.
        PERFORM bdc_dynpro      USING 'SAPMM06B' '0106'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'RM06B-BNFPO'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '=BU'.
    Call The Transaction
        PERFORM bdc_transaction USING 'ME51'.
      ENDLOOP.
    Close the BDC Session
      PERFORM close_group.
    with regards,
    Hema Sundara.

  • How to handle the table control While working with LSMW?

    How to handle the table control While working with LSMW?

    its possible in lsmw,
    Hi,
    LSMW will have a Indicator for headr and itam, i do not remember the correct field, but it will have an indicator, check the fields, there will be a single charecter lenght field, that should be the indicator, and using that we can write the logic.
    check that single charecter field, it that is X that means the header record is processed, and do the items.
    and, this is another way, try this out also
    YOu can do this in "Define Source Structures" step,
    the HEADER is defined first,
    then the DETAIL below the HEADER.
    add the fields to the structures.
    Both should have some common key field
    Please take care that the name of the common field is the same.
    Once you do this it is linked. The you have a header and item corresponding to that header. then run the LSMW as you would.
    Thanks

Maybe you are looking for

  • Can I get my Macbook Pro just checked out and tuned up at the genius bar?

    I'm having a hard time getting my questions answered. Basically I've had my Macbook Pro for four and a half years, but it's still doing mostly fine. It's just showing it's age slightly I think, with more spinning wheels than usual and odd things like

  • Copy Standard ABAP Server Proxy-Re use?

    Hi: I have copied the sap standard server proxy "PurchaseOrderConfirmation_In" from the name space http://sap.com/xi/SRM/Procurement/Global to my own name space and created a Interface ZConfirm_in. The sap standard proxy PurchaseOrderConfirmation_In

  • ORA-12052 when create materialized view

    I following the sample in Oracle document to create materialized viewCREATE MATERIALIZED VIEW LOG ON sales    WITH ROWID, SEQUENCE(amount_sold, time_id, prod_id)   INCLUDING NEW VALUES; CREATE MATERIALIZED VIEW LOG ON times    WITH ROWID, SEQUENCE (t

  • Sender Channel - File Archiving - No Create Target Directory option

    Hello, We are getting an error because our Sender channel is always trying to create the target directory when saving a file in our archive location.  Using a Receiver Channel the option "Create Target Directory" exists, so I can disable that option.

  • Reg:BPM execution

    hi can i know where exactly the integration process executes in IE/BPE Regards chandrakanth