How to capture Archive File name in File/Ftp Adapter
Hi,
I want to capture the archive file name when working with File/Ftp Adapters. I think there is no out of box property available to achieve this (Like jca.file.filename).
Please let me know if there is any possible solution.
Thanks
JGun
Hi,
Use jca.file.PhysicalArchiveDirectory/jca.file.LogicalArchiveDirectory depends upon which you have configured.
Thanks
Similar Messages
-
How to find the File name using the FTP Adapter
hi all,
how to find the File name using the FTP Adapter with BPEL.
RegardsFound the solution for this.
First In the mediator's routing rule use assign property $in.property.jca.file.FileName to $out.property.jca.file.FileName
In the BPEL's receive activity go to the properties tab and get the property to a BPEL variable. That should do it.
Thanks for the posts -
Get the File Name received from FTP Adapter
Hi,
How to get the File name reived through the FTP Adpater. I have created a variable with the Message type from ftpAdapterinboundheader.wsdl. from there I mapped the filename attribute to a local string variable.
But I did not receive the file name. The output in the Audit trail is as follows:
<?xml version="1.0" encoding="UTF-8" ?>
- <Invoke_File_Process_FileProcess_InputVariable>
- <part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="InputParameters">
- <InputParameters xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/PIERS/SP_FILE_PROCESS_UPDATE/">
<AS_DIR xmlns="">I</AS_DIR>
<AS_FILE_NAME xmlns="" />
</InputParameters>
</part>
</Invoke_File_Process_FileProcess_InputVariable>
Can any one let me know how to get the recevied file name from FTP adapter.
Thanksyou have to define variable of type InboundHeader_msg. Then in receive activity click on Adapter tab and for header variable chose your newly created variable (InboundHeader_msg). Once you receive message from FTP you should see in this variable fileName.
-
Dynamic file name creation using FTP adapter wired from a mediator
Hi All,
My Requirement is as follows....
Mediator is wired to Three FTP adapters to create three files.
File names are dynamic.
In the mediator those three routings, mappings and assignment for the directory and file name are being created.
But out of 3 files, 2 files are being created with the names mentioned during the FTP adapter configuration and the last one is being created
with the dynamic value.
Any help in this regard is highly thankful.
Thank you.
Srivatsasa.Create a UDF in mapping taking counter from IDoc as input parameter
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String totalFilename = "AAAA_" + counter;
conf.put(key,totalFilename);
return totalFilename;
Map output of this UDF to Top node at target.
you will not be able to see the result in test tab of mapping but it works end to end
Select Adapter Specific Message Attributes in receiver file adapter..here select filename checkbox -
HT2476 How do I copy the names of files in a finder window to a text document?
How do I copy the names of files in a finder window to a text document?
If using Apple TextEdit Applications: Select all the files in the finder window, choose copy. Go to the TextEdit window and from the menu choose Edit then choose Paste and Match Style from the Edit drop down menu.
-
How to keep same file name in File to Mail-Without Ripository Object??
Hello Experts,
I have a requirement where I need to pick a file and need to send that as an attachment by mail adapter through PI.
I can send the file as attachment but the file name is being changed.
For example,the source file with name "Vendor_2011_11_06" is being transfered but when I am checking the mail box,the file is coming as attachment but the name has been changed to "Untitled.bin".I want the same file name as it was in source SFTP server.
Do any one have any idea that how can we set the file name at receiver mail adapter?
**Note:I have not created any repository objects,simply configured the ID object with dummy Service Interface name.So no mapping exist.Hi,
For example,the source file with name "Vendor_2011_11_06" is being transfered but when I am checking the mail box,the file is coming as attachment but the name has been changed to "Untitled.bin".I want the same file name as it was in source SFTP server.
by using MessageTransformBean you can acheive this.
Transform.ContentDisposition------ attachment or inline For example, attachment;filename=u201Dabc.txtu201D
Transform.ContentDescription------- Description
Transform.ContentType------Specifies the payload type, for example, text/plain
refer this blog
http://wiki.sdn.sap.com/wiki/display/XI/DynamicEmailAttachmentnameforReceivedMails
i hope this will help you.
regards,
ganesh. -
How should we get the out put file-name same as in put file-name in file to
Hi frnds,
having hundreds of files in the sender system with different names, how should we get the out put file-name in the receiver system same as the in put file-name in file to file scenario ?
Thanks in advance.
truly,
snrvakiti.Hi,
In Receiver File Adapter you can set under 'Adapter-Specific Message Properties'
check Use Adapter-Specific Message Properties
check Fail on Missing Adapter Message Properties
Check File Name
Have a look at this link, [File_to_File|http://allsapnetweavernotes.blogspot.com/2008/09/how-can-i-access-filename-from-fileftp.html]
Regards,
P.Rajesh -
# Question
When I open the "Save Page As" window, the drop-down box for the file name shows files that were saved long ago. This is not cleared by any "clear history" function that I can find. How do I clear this?Hello.
I believe this is a Windows related issue, since it's the windows Save File manager we're talking about here (right?). You should contact Microsoft for help on that one, I believe. You'd expect to be able to delete the entries by simply tapping ''Delete'' on your keyboard when they are focused (that's how it goes for deleting specific form autocomplete entries in Firefox), but I haven't tried that.
I'm sorry I can't be of more help. -
FILE NAME WITH FILE EXTENTIONS
HI EXPERTS!!
I WANT TO GET THE FULL FILE NAME STRORED IN THE SERVER FOLDER. I USED FM RZL_READ_DIR_LOCAL BUT I AM GETTING ONLY 32 DIGITS OF NAME NOT FULL NAME AND ALSO SIZE PARAMETER IS CONCATENATING WITH NAME.
I WANT THE FILE NAME WITH FILE EXTENTIONS(TXT. .PDF ETC)..
PLZ SUGGEST ME HOW TO GET THE SAME..
PLZ REPLYE ME..
MAHESHHi Mahesh,
Try the below FM in the below code.
DATA:
LV_PERMISSION(10), " Permission
LV_H2, " H2
LV_FLNM(13), " File name
LV_USER(10), " User
LV_GROUP(10), " Group
LV_SIZE(15), " Size
LV_MONTH(3), " Month
LV_DAY_C(2), " Day
LV_YEAR(5), " Year
LV_FILE_NAME TYPE FILE_NAME, " Filename
LV_JUNK, " Junk
RETURN_CODE TYPE I. " Return code
DATA:
CMD_PARAMS LIKE SXPGCOLIST-PARAMETERS,
" External prg.parameters
CMD_OUTPUT TYPE BTCXPM OCCURS 0, " Log message
STATUS TYPE EXTCMDEXEX-STATUS. " Status
CONSTANTS:
LC_DIR TYPE C VALUE 'd'. " Directory
FIELD-SYMBOLS: <CMD_OUTPUT_LINE> LIKE LINE OF CMD_OUTPUT.
CMD_PARAMS = PV_DIRECTORY.
CLEAR CMD_OUTPUT.
CALL FUNCTION 'SXPG_CALL_SYSTEM'
EXPORTING
COMMANDNAME = 'Y_LS_LN'
ADDITIONAL_PARAMETERS = CMD_PARAMS
IMPORTING
STATUS = STATUS
EXITCODE = RETURN_CODE
TABLES
EXEC_PROTOCOL = CMD_OUTPUT
EXCEPTIONS
NO_PERMISSION = 1
COMMAND_NOT_FOUND = 2
PARAMETERS_TOO_LONG = 3
SECURITY_RISK = 4
WRONG_CHECK_CALL_INTERFACE = 5
PROGRAM_START_ERROR = 6
PROGRAM_TERMINATION_ERROR = 7
X_ERROR = 8
PARAMETER_EXPECTED = 9
TOO_MANY_PARAMETERS = 10
ILLEGAL_COMMAND = 11
OTHERS = 12.
Check Status first then check sy-subrc
CASE SY-SUBRC.
WHEN 0.
CASE STATUS.
WHEN 'F'.
MESSAGE I057(YS) WITH 'SXPG_CALL_SYSTEM'(002).
GF_EXIT = GC_TRUE.
WHEN 'E'.
MESSAGE I058(YS) WITH 'SXPG_CALL_SYSTEM'(002).
GF_EXIT = GC_TRUE.
WHEN 'S'.
MESSAGE I059(YS) WITH 'SXPG_CALL_SYSTEM'(002).
GF_EXIT = GC_TRUE.
WHEN 'C'.
MESSAGE I061(YS) WITH 'SXPG_CALL_SYSTEM'(002).
GF_EXIT = GC_TRUE.
ENDCASE. " CASE STATUS.
WHEN 1.
MESSAGE I048(YS) WITH 'SXPG_CALL_SYSTEM'(002).
GF_EXIT = GC_TRUE.
WHEN 2.
MESSAGE I049(YS) WITH 'Y_LS_LN'(003).
GF_EXIT = GC_TRUE.
WHEN 3.
MESSAGE I050(YS) WITH 'SXPG_CALL_SYSTEM'(002).
GF_EXIT = GC_TRUE.
WHEN 9.
MESSAGE I054(YS) WITH 'SXPG_CALL_SYSTEM'(002).
GF_EXIT = GC_TRUE.
WHEN 10.
MESSAGE I055(YS) WITH 'SXPG_CALL_SYSTEM'.
GF_EXIT = GC_TRUE.
WHEN 11.
MESSAGE I056(YS) WITH 'SXPG_CALL_SYSTEM'(002).
GF_EXIT = GC_TRUE.
WHEN OTHERS.
MESSAGE I022(YS) WITH SY-SUBRC.
GF_EXIT = GC_TRUE.
ENDCASE. " CASE SY-SUBRC.
IF GF_EXIT = ' '.
READ TABLE CMD_OUTPUT ASSIGNING <CMD_OUTPUT_LINE> INDEX 1.
IF SY-SUBRC = 0.
CONDENSE <CMD_OUTPUT_LINE>-MESSAGE.
IF <CMD_OUTPUT_LINE>-MESSAGE CS 'total' OR
<CMD_OUTPUT_LINE>-MESSAGE CS 'TOTAL'.
DELETE CMD_OUTPUT INDEX 1.
ENDIF.
ENDIF.
LOOP AT CMD_OUTPUT ASSIGNING <CMD_OUTPUT_LINE>.
CONDENSE <CMD_OUTPUT_LINE>-MESSAGE.
SPLIT <CMD_OUTPUT_LINE>-MESSAGE AT SPACE INTO
LV_PERMISSION
LV_H2
LV_USER
LV_GROUP
LV_SIZE
LV_MONTH
LV_DAY_C
LV_YEAR
LV_FILE_NAME
LV_JUNK.
IF LV_PERMISSION(1) = LC_DIR.
CONTINUE.
ELSE.
LV_FLNM = LV_FILE_NAME(13).
TRANSLATE LV_FLNM TO UPPER CASE.
IF LV_FLNM = '1W_FIARFUNNEL'.
PT_FILE-FILE_NAME = LV_FILE_NAME.
APPEND PT_FILE.
ENDIF. " IF LV_FLNM = '1D_FIARFUNNEL'.
ENDIF. " IF lv_permission(1) = ...
ENDLOOP. " LOOP AT CMD_OUTPUT
ENDIF. " IF GF_EXIT = ' '. -
Dynamic File name in File Adapter
Hi,
I have a requirement to pass dynamic file name in File Adapter.
Is there any way to pass a variable for the file name attribut in file adapter.
I am looking for some options apart from %yyMMddHHmmss%,%SEQ%...etc
Please suggest if any of you have information on how to put values from a variable to file name attribute in file adapter
regards
SaijuHi Saiju,
Yes there is.
Assign your file name to a variable, let's say 'fileName'.
Now go to your invoke activity(for the specific fileadapter) -> Property tab-> find a property call jca.file.FileName -> in the value field assign 'fileName' variable.
That's it... (assuming you are using 11g)
Arik
Edited by: Arik on Jun 27, 2012 3:12 PM -
File Name and File Content not gettinng passed from Proxy to Business Serv
Hi All ,
I have a requirement in OSB , where i need to pick the file from remote Source and FTP the files to Remote Target .Below are the steps which i did to achieve this.
1.Created a FTP Adapter in JDeveloper to Get the files from Source and a FTP Adpater to Put the files to Target.Inboth the adapters i have choose 'Shema is Opaque'
2.Imported the wsdl and jca file to OSB
3.Generated Proxy Service (PS ) and Business service (BS) out of Step 2
4.I edited the Message flow such a way that , the PS is routed to invoke the BS
Aslo i assigned $inbound/ctx:transport/ctx:request/tp:headers/jca:jca.file.FileName to a variable 'FileName' in PS
and in BS service i passed $outbound/ctx:transport/ctx:request/tp:headers/jca:jca.ftp.FileName = 'FileName'
When i tried to activate my session , the file that is getting written to the target has 0 byte.Also , the file name is also not getting passed from PS to BS
Can some one help me with the steps on how to use the Xpath , so as to pass the file name and file body from proxy servive to business service.
Thanks
JohnI search multiple shares to find a common file name then create a single output file. I will be doing this search and file creation
for 5-10 different file names. If there is a better way .. certainly open for suggestions. It's working but having issue with
the cmd file for every file and folder I check. It puts this error out for each run of the process.
Error message in LOG file:
Get-ChildItem : Cannot find path 'F:\powershell\-SearchFor' because it does not exist.
Thanks.
I tried your code with little changes and saved in Temp folder.
My CMD file has the below code
PowerShell C:\Temp\Untitled1.ps1
It worked.
Regards Chen V [MCTS SharePoint 2010] -
Custom File Name-Original File Number doesn't work. Why?
I want to export and rename some files with the "Custom File Name-Original File Number" option. Yet this doesn't seem to work, and I wondered what I might be doing wrong. The filename will only rename as the custom text.
The sample file name shown underneath has a dash after the custom text bit, but then the extension only eg Newname-.tif
I am now using LR 4.2 but I seem to remember doing this renaming OK with an earlier version (though I can't remember which). This suggest that either there is a problem with this specific version or that I have something set differently to the way I had it initially. I am hoping the latter is the case. Any suggestions as to how to fix this would be welcome!I am sorry to report that i don't know how to create a screenshot. However, what I am getting, exact;ly is this:
From Library grid view: F2 or Library>Rename Photo
Then little screen appears with heading Rename Photo:
File Naming> set to Custom Name - Original File Number
Custom Text> NewFilenameHere
Example: NewFilenameHere-.tif
Clicking on OK changes the filename to just the custom text without the original file number. Original File name shows in metadata eg DSC01129-Edit.tif
The only way i seem to be able to get the original file number with the custom text is to include it manually as part of the custom text. -
Passing the file name and file type for mime_download
HI All,
Can You Please let me know how to pass the parameters file name and file type for mime_download.
Thanks in Advance.
Regards,
Haritha.Hello Haritha,
Please see the SAP help:
http://help.sap.com/saphelp_nw70/helpdata/en/46/9bd97240b81e5be10000000a1553f6/frameset.htm
Edgar -
Make "File name" and "Files of type" fields read-only in JFileChooser
I try to make the "File name" and "Files of type" fields read-only in JFileChooser dialog. Anybody
knows how to do? Thanks.You mean so the user can't choose the name of the file to open or save? Not much point in even using a JFileChooser, then, is there? Or did I misunderstand the question?
-
Our company recently purchased Adobe Acrobat Pro XI for the purpose of using it for shared electronic reviews. We are using Send for Shared Review created in Adobe Acrobat Pro XI, and all the Comment tools work as expectedexcept the paperclip in Annotations.
When a Word or Excel or Image(png,jpeg) file is attached using the Annotations paperclip, the initiator can initially see and open it. But after Publish Comments is selected and the review file is closed, the file "Name" changes to "Unknown" (although the Description has the correct file name and extension). The Modified information is Unknown, as is the Size and Compressed Size.
When the review file is then re-opened, even the initiator cannot open the file, although:
The file location is marked with the paperclip within the document.
The file name is shown in the Comments List with the initiator's name.
In the Attachments list (the paperclip beneath the Thumbnails and Bookmarks) the Name appears as Unknown, Description shows the file name, Modified is Unknown, Size is Unknown, and Compressed Size is Unknown.
The file Name cannot be edited, although the file Description can be.
We have followed the procedure described in the tutorials but cannot figure out how to troubleshoot this situation. Since this feature was the reason for the purchase of Adobe Acrobat Pro IX, we would any help. Please don't leave out any basics since we are all new users.
We have several people with Adobe Acrobat Pro XI and the rest have Adobe Reader XI and it is a Windows platform. Can someone please give us some advice how to get this feature to work as described?FYI Rave,
There are some other forum entries with this exact same issue...:
Cannot Open Attachments in PDF
Why does the file Name for file attached with Annotations "Attach File" (paperclip) become Unknown when Comments are Published?
Can someone help us get the COMMENTS ATTACHMENT TOOL to work as described in Acrobat Pro XI? -
Xml file in dynamic file name in file receiver adapter
Hi,
I'm doing the dynamic file name in file receiver adapter. I have done as per instructed in /people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i
All turned out okay. I have got the file name I require. Except that the file format is XML and I need to suppress the filename node occupied by the dynamic file name.
The content conversion mentioned in /people/sravya.talanki2/blog/2005/08/11/solution-to-the-problem-encountered-using-variable-substitution-with-xi-sp12, does not seem to solve my problem. As it is only for file format other than the XML one, because we only do the content conversion if we want to "convert" the format of the content from XML to the other format.
Does anybody have the solution to my problem? thanks in advanceThank you Raj for the direction
The way to do it is :
1. In ID, advanced tab, put a check on the adapter-specific message attributes - file name.
2. Put a "*" on the file name scheme
3. In IR, create a UDF to set up target file name :
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
// set up file name for receiver adapter
String SourceFileName = conf.get(key);
conf.put(key, TargetFileName);
return " ";
4. Map the above UDF to the header level of the target structure.
Regards,
Idi
Maybe you are looking for
-
Is there a plug-in to correct converging verticals?
I sometimes need to correct converging vertical lines in images (buildings, for example). I use Photoshop Elements but I would like to be able to do this in Aperture. Is there a plug-in application out there that can do this, please? There are plug-i
-
Virus,Malware not being picked up by Virus Barrier X6
Hi I stupidly tried to download a movie from piratebay. Error message appeared saying I din't have the right plugins and to enter my mac password - which I did. Anyway I now have a file appearing in my Mac HD called deletebkR3pEq. This multiplies ove
-
Network in Finder doesn't display available servers
I have not seen this on the boards (exactly). When I choose the network icon in a finder window instead of seeing the other computers on the network, I see three folders: 1. Users, 2. Applications, 3. Library nothing is in any of them. I am on mac G5
-
I've the following header and http request. POST http://deab/DexNETWebServices_4_0_0_4/LoginService.svc HTTP/1.1 MIME-Version: 1.0 Content-Type: multipart/related; type="application/xop+xml";start="<http://tempuri.org/0>";boundary="uuid:e4c19840-745d
-
Change NTSC - PAL easily?
Hi, I was so unfortunate to almost finish a large PAL project with Easy Setup default setting NTSC. I got a conflict warning in iDVD and very poor video quality! Is there an easy way to switch to PAL and save all my editing work? Do I really have to