How to catch the error occurred in Integration Process, and then save it?

1. how to catch the error occurred in Integration Process, and then save the detailed error message to the file?
2. there are fault message type for inbound message interface, how to use the fault message type in IR?
Thanks,
Michael
Message was edited by: Spring Tang
inital
Message was edited by: Spring Tang
detailed message output
Message was edited by: Spring Tang
fault message type

Hi Spring,
If u give an exception step along with your Transformation Step, whenever some error occurs in your message mapping, this exception block wil be triggered.
You can configure your exception block to do all exception processing that you want. This exception handling is like any other java Exceptio n Handler. You can do anything that you want in your exception handler block on the basis of your requirements.
<i>If an exception is triggered at runtime, the system first searches for the relevant exception handler in surrounding blocks. If it does not find the correct exception handler, it continues the search in the next block in the block hierarchy.
When the system finds the correct system handler, it stops all active steps in the block in which the exception handler is defined and then continues processing in the exception handler branch. Once the exception handler has finished processing, the process is continued after the block.
If the system fails to find an exception handler, it terminates the integration process with an error.</i>
Regards,
Bhavesh

Similar Messages

How to rectify the errors occured during session method

how to rectify the errors occured during session method

HI
When the execution of session is completed: we can check the errors via the log.
Rectification of errors depends on the kind of errors. It is not specific that we have to approach the same way to handle all kinds of errors.
Errors can be due to data format, inconsistency due to the configuration, unavailability of master data...
Kind Regards
Eswar

How to catch the error if an RFC fails due to short dump

Hi All,
I was calling the RFC Function module in parallel processing depends on the number of work processors available. I am getting the return message from the Function module using the perform statement
PERFORMING task_return ON END OF TASK
But I am not able to catch the errors if the RFC has been terminated due to the dump or manually killing the RFC while running.
I need how to handle the RFC if the call has been terminated due to the dump or system failure. Does the RFC return the sy-subrc at this time or can we able to catch the error in any other way.
Thanks & regards,
Vijay

Hello Vijay,
If you're calling RFC from outside SAP using the OCX-SAPFunctions-Library, then you can catch the dump or any other exception occuring in your SAP-Function.
Assuming that, objRFCFunc is the RFC-Function you can get the Excepetion-Code through objRFCFunc.Exception.
It returns a String. If the error was a dump, the String is "SYSTEM_FAILURE". If it is a "regular" Exception you'll get the Exceptioncode. E.g. "NO_DATA_FOUND".
If you need any sample code e.g. VBA-code for use in Office-Applications, let me know.
regards
Sven

How to catch the error code thrown by Oracle client installation?

Hi everyone,
Recently, I'm writing a bat file to install Oracle 11g client for windows, I know the command line should be below, but how to find the error code it return? like the command line I want to run in Windows, the errorlevel will return 0 if the command line is pass, otherwise it will return no-zero:
oui.exe -silent -waitforcompletion -nowait -force -responseFile ...\response\clientruntime.rsp
BTW, I know I can find the error info under the path ...\Oracle\Inventory\logs, but I think it is better if you can tell me another way to catch the error in command line. I just wish that I can determine whether the Oracle provider installation is pass......
Thanks
Lindsay
Edited by: lindsaywang on Oct 6, 2008 1:28 PM

I got it.
Thanks,
TD

[JavaScript] How to catch the error when the cache page is not found?

I want to use the cache of the navigator, to get data stored before (and not to send the same data) with AJAX. So I use the error 304 to tell that the page was not change, so use the cache instead. In the other navigator, there are no error, but only a blank responseText.
But with Firefox, the error "no element found" is displayed in the Error Console. Is there a possibility to not displayed it? Maybe with "catch" and "try", but I have no idea where to place it.
Thank you =)
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/532.9 (KHTML, like Gecko) Iron/4.0.280.0 Chrome/4.0.280.0 Safari/532.9

A good place to ask questions and advice about web development is at the MozillaZine Web Development/Standards Evangelism forum.
The helpers at that forum are more knowledgeable about web development issues.
You need to register at the MozillaZine forum site in order to post at that forum.
See http://forums.mozillazine.org/viewforum.php?f=25
You need to post a link to the website or relevant parts of the code.

How to get the current running activity , suspend it and then restart it?

hi everybody,
i'm new in the Bpel world so please try to help me ...
So my question is how, while a bpel process is running, can i get the activity currently running...and if there is a problem while the execution i can get where exactly did the process stopped and i could restart it?
i know these are lot of questions but any thing could help....
thanks in advance

i already tried JAVA BPEL PM API i wrote the code but i didn't test it yet...
since i don't know yet how to write a hole project running in the oracle server i couldn't konw if my code is running or not???
Locator locator = new Locator("default","bpel");
WhereCondition where = WhereConditionHelper.whereActivitiesOpen();
IActivityHandle[] activityHandles=locator.listActivities(where);
System.out.println("state of an activity "+ activityHandles[2].getState()+ " " +activityHandles[2].getLabel());
but to know which activity was running when a problem occured...i'll give a look to the file you gave me about bpel fault policies....
but to restart the process with java code from specific activity...i didn't find in the API something to do this..
so may be you could help in this point???
thanks in advance

How do I get out of an iphone restoration loop, itunes keeps saying it has detected an iphone in restore mode and that it must check for software updates and reinstall the ios, it completes this process and then says: detected iphone in restore mode etc.,

Background: my iphone 3gs was running wonderfully - no issues at all, as normal.
I let the power run down to critical and got the empty battery screen - plugged it in and when it had enuf juice it displayed the cord-to-itunes-of-death-screen...
I had just backed up the previous to icloud so no worries... I just plugged in and thought ok this will just take a second...it completed the restore then said with a glazed amnesic font "Itunes has detected an iPhone in recovery mode, and has never seen or restored this iphone ever before, since this is a stranger iphone, itunes does not trust it and must call the ipolice to check for contraban in its orifices and cavities, you must restore"... kidding of course... but
OMG at home I did the whole restore process no less than 20 times while optimizing and accounting for different variables each time (restoring on a new system with a fresh OS, trying to restore and a mac, restoring then restarting empty cache, restart unistall itunes then restore restart restore, installing an older version of Itunes and restoring. going back to Vista and restoring), and every single time it would complete the check, the update/check, the ios reinstall, and then whatever else and say "complete"... and then no icon menu would appear for the device in itunes so unplug the phone and replug and get the whole "Itunes must render restore aid" message. SO I went to the genuis bar at my local iBoutique thrice - each time the bewildered but very courteous and knowledgable genuis wanted to keep trying ... since I had been on this treadmill for about two weeks I decided each time to respect my fellow appletonians and not suck up genius time... but I really want my old 3gs back... why - I like that it amazes the youth who occaisonal are puzzled by seeing something apple that they don't recognize and in wonder and amazement at its age they learn that even though its no longer invited to iOS family gatherings that it still can call home and ask why Apple waited so long when it was a kid to give it copy-paste ability like all the other kids, then ask for money for the shrink bill.. ... . . ..

Soooooooo.... You obviously need to restore the device
It seems that you have tried several options to restore it. What I would do is leave it plugged it and hold down the Home button AND the Power button together till you see the white apple appears. Then let go of the Power button but continue to hold the home button. You should get the message in iTunes again saying that the iPhone needs to be restored. Hit OK then RESTORE.
Hope this helps!!

Why do the characters in the field of a form disappear when I attach the form to another PDF file and then save the resulting pdf?

This just started happening and it does not happen every time I do this action. I occasionally get the following message "An incorrect structure was found in the PDF file" and that seems to be part of the issue. Has anyone experienced anything like this?

I found out that if I waited about 15 minutes the PDF file became normal. Thank heavens! I've now sent out my newsletter for my Quilt Club to our 90 e-mail subscribers and all of them I have heard from have gotten it the way I had written it. It must just have been a quirk that happened, but I sure am glad it fixed itself. I only have 5 more newsletters to write and then I am done. Thank Heaven. Thank you for trying to help. I was about to become even more crazed than I get when I have to publish the newsletter. I do it once a month and I never would have volunteered for the 2 year job if I had know how much work it is. My husband walks gently when he knows I am trying to put the newsletter together. I'm not usually crabby, but this has made me a nut case once a month. It's a good thing we've been married for 37 years, so he knows that it is only the "newsletter editor nutty lady" that is getting mad at everything and everyone, including him! Thanks for trying to help. You were the only one that answered. JO
Date: Tue, 6 Jul 2010 03:29:03 -0600
From: [email protected]
To: [email protected]
Subject: Why do I get a black version when I convert my document to PDF?
How did you convert the file to PDF?
>

How do I fix the "error occurred when attempting to change modules on an I Mac". The solutions on the web are totally confusing to me?

Does anybody know how to fix the "error occurred when attempting to change modules" on an I Mac??

http://helpx.adobe.com/lightroom/kb/error-changing-modules-lightroom.html

Catch the error in to a log file

Hi Team,
Created the script for testing the server online or offline, Could you please tell me how to catch the error in to a file
Try
$Result = Test-Connection -count 1 -computer (Get-Content ServerName.txt) -ErrorAction "Continue"
Catch
   $Result = New-Object PSCustomObject -Property @{
            TimeStamp = Get-Date
            __Server = $env:COMPUTERNAME
            Address = $Computer
            Protocol = ""
            ResponseTime = "Failed"
$Result | Select TimeStamp,__Server,Address,ProtocolAddress,ResponseTime | ft -AutoSize

As mjolinor pointed, you should change the -ErrorAction to Stop to make the control flow into catch block when error occurs. Just change alone is not sufficient because, the control will go to catch block if any of the computer in servername.txt gives error,
and it will not go back to next computer in your text file perform the ping.
So try chaning the code as shown below.
$Outarr = @()
foreach($Comp in (Get-Content C:\temp\servers.txt)) {
Try {
$Result = Test-Connection -count 1 -computer $Comp -ErrorAction stop
Catch {
$Result = New-Object PSCustomObject -Property @{
TimeStamp = Get-Date
__Server = $env:COMPUTERNAME
Address = $Comp
Protocol = ""
ResponseTime = "Failed"
$Outarr +=$Result
$Outarr| Select TimeStamp,__Server,Address,ProtocolAddress,ResponseTime | ft -AutoSize
Hope this helps.
Thanks,
Sitaram Pamarthi
Blog : http://techibee.com
Follow on Twitter
This posting is provided AS IS with no warranties or gurentees,and confers no rights
You can simplify that to:
$Outarr =
foreach($Comp in (Get-Content C:\temp\servers.txt)) {
Try {
Test-Connection -count 1 -computer $Comp -ErrorAction stop
Catch {
[PSCustomObject]@{
TimeStamp = Get-Date
__Server = $env:COMPUTERNAME
Address = $Comp
Protocol = ""
ResponseTime = "Failed"
$Outarr | ft -AutoSize
The [PSCustomObject] type accelerator will take the hash table as a constructor, and coerce it to an [ordered] hash table, so the properties will stay in the same order they were declared. That eliminates the need to use Select-Object afterward to
get them back into the right order.
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "

How to rectify the Errors that occurs in QA system?

hi,
if there are some errors that occurs while transporting my ods from development to QA. how should i see the errors? And then how to rectify the errors that happened in the transports in QA nor DEV.
Can anyone let me know the entire process for the correcting the errors in transports if any docs pls email at [email protected]
regds
haritha

hi,
while importing the reqst if u get any kind of errors , u need to check the Transport Log Entries
thez are the posible return codes
0 means all is ok
4 means something happens, e. g. something in the destination system is deletet, but else everything ok
8 means something goes wrong. Some parts could be transportet but not all
If you have higher than 8 you have a problem. If you want to know more about a transport read the transport protocol. It tells you what the problem is
Analyze the trnasport log and fix the issue based on the error msg and reimpor t he reqst
thanks

How to fix this error "The error occurred while processing a command of type 'setState' in plug-in 'servermgr_netboot'."

I received this alert while configurating the OS X Server. But i don't know how to fix the error.
Thank's
lzraeder

Hope this helps.
I have been messing around with Mt Lion Server last day or so. Different than Lion Server, more refined, more sreamlined.
I got this same error message when trying to enable and setup NetRestore / NetInstall.
Looks like when one is using Wi-Fi as the network interface, you get this error. I suspected this.
Not sure if this is a bug or Apple wants people to use Ethernet only, if so why give a choice, probably a bug.
I have succefully used NetRestotre Lion server on a 2011 Mac Mini, worked perfectly. Then I remembered, I was using wired Ethernet, as I suspect most servers would use a wired network connection.
MT Lion Server NetRestore / NetInstall works if you use Ethernet, and turn off Wi-Fi. Ethernet will actually show up as a selectable option under Access > Settings > Enable NetInstall Setttings On.., and you click Edit, and can check enable Ethernet.
Once I did that the error went away. Then you get another message, if you do not have a NetRestore (in my case) image in the proper path, which you can set. I always like to do this away from the the boot volume, saves space, etc.
You have to manually copy the .nbi folder you created with System Image Util. It seems Apple could have gone the extra step and included that in the Server GUI.
No more Workgroup Manager, Server Admin, and the other dozen apps it tooks to admin server. Some are complaining. I for one like it very much. Always thought it was somewhat stupid and lazy of Apple to have that functionality across several apps. It was always un Apple like. It should be One App. I like what the Server app is now.
Managing users, groups, shares, services is so much better, and refined, consolidated. Makes so much more sense.
(Local User, Local Network User), you actually know clearly what type of user you are loooking at. WGM was IMHO a nightmare to navigate, it was schizophrenic (left over from NeXT I surmise).
And of course one can go to the CL for all sorts of deep things like dns, changeip, dscl, odutil, etc. It's all there.
john

How to catch the value in sum(control break statement).

hi,
can any one tell me how to catch the value in sum in control break satament.
ex.
at end of brtwr.
sum.
endat.
I need to print the value in sum only.
I tried to declare a varaible of type i and assigned sum to this variable.
it is giving syntax error that sum is not identified.
How should i do this.
regards.

Hi Siva,
In control break statement when we use SUM. it added all the amount fields and stores its in the work area of that field.
look below code.
DATA : BEGIN OF itab OCCURS 0,
           name(10),
           num TYPE i,
       END OF itab.
DATA : num TYPE i .
itab-name = 'salman'.
itab-num = 100.
APPEND itab.
itab-name = 'salman'.
itab-num = 200.
APPEND itab.
itab-name = 'akshay'.
itab-num = 500.
APPEND itab.
LOOP AT itab.
AT END OF name.
    SUM.
    WRITE : / itab-num.
ENDAT.
ENDLOOP.
here the SUM value is stored in Workarea,
the output will be 300 & 500.
regards
Kumar M

How to know the error code?

Hi,
how can i know the error code of the error occured in plsql ?
Eg if i catch the exception IN WHEN others THen i need to pront the error code.
How can i do it?

exception
when others then
dbms_output.put_line(sqlerrm||sqlcode);
end;

How to customize the error messages in web analysis reports

Does anyone know how to customize the error messages that web analysis shows ,
I want to customize the below error message with a custom error message
"Document does not exist or no authorization to open document.Error occurred while loading document"
Does anyone know how to do this ?

Rajesh,
you may want to check these links
How to the Change the Application Stopped Message
How to Change the Dispatcher Running, No Server Connected Message
http://help.sap.com/saphelp_nw70/helpdata/en/65/18fc3f9ec4e669e10000000a155106/frameset.htm
Thanks
Bala Duvvuri

How to catch the error occurred in Integration Process, and then save it?

Similar Messages

Maybe you are looking for