How to change a generated root node for a hierarchy?

Hello,
we are loading hierarchies from an ECC system. Some of those hierarchies don't have a root node in the source system.
For those hierarchies, the root node is generated during the loading. This node is generated in english (ie : FUNDS CENTER HIERARCHY for fund centers). Is there a way to change the description and the technical name of this node to have it in another language.
We have tryied to change the language of ALEREMOTE in BI but it did not solve this problem.
Thanks,
Philippe

Hi Simon,
the language that triggered the loading was french.
BI Learner,
- to create a custom hierarchy in a BI system, you can use RSH1 transaction.
- if you want to load it from a SAP source system, you can use standard datasource provided in the business content (usually named *_HIER)
-if you need to load it from a flat file, you can follow the steps of this blog, it will help you:
Hierarchy Upload from Flat files
you can have more information about hierarchies on the help.sap web site :
http://help.sap.com/saphelp_nw70/helpdata/EN/a8/6b023b6069d22ee10000000a11402f/frameset.htm
Regards,
Philippe

Similar Messages

PCOLL_CONTROL, PCST_TXN,...What are these objects? JBO-28039:Root node for collection

I've a UIX JSP Application with BC4J developed with JDeveloper RC.
I noted that in my schema there are these "strange" db objects:
PCOLL_CONTROL
PCST_MYPACKAGEMODULE_SEQ
PCST_MyPackageModule
PCST_TXN
PCST_TXN_SEQ
Can anyone explain what are they or where can I find documentation about them ?
When and why Jdev create them ?
Beside some people that use my application got the following Error:
"JBO-28039: Root node for collection TXN of id -1 is invalid......".
I think that it's connected with the objects listed above.
Has someone experienced this problem ?
thank you
Isabella

Could you provide more information regarding this issue:
1. When you mention that some people that use your application receive the exception do you mean that the
exception is thrown from the application and displayed to the user or do you mean that the exception is simply logged
in the Diagnostic output? The latter may be expected in some scenarios.
2. Could you provide a full stack trace for the exception?
3. Could you provide the BC4J diagnostic output generated when the exception occurs (specify the VM switch
-Djbo.debugoutput=console at the command line)?
Thanks,
JR

How to change default Current Flag values for SCD2?

I'd be curious to find out how to change default Current Flag values for SCD2 (instead of 0/1 to use N/Y)
Probably I can change IKM module .... is there another way?
Thanks

Hi,
You need change the IKM. This values are hardcode in the IKM.
You can create a new IKM and the values used are a options of the IKM.
Regards
Edited by: Uthred on May 18, 2009 4:27 PM

How to create one more server node for SAP J2EE server?

Hi,
Can any one please suggest how to create one more server node for SAP J2EE server? I am using WAS700.
Thanks and Regards,
Smriti.

Hai,
Login into the Configtool(C:\usr\sap\SID\DVEBMGS<inst no>\j2ee\configtool) if ABAP+JAVA stack or C:\usr\sap\SID\JC<inst no>\j2ee\configtool) if JAVA stack
click on the instance and and select the addserver button on the top to create a servernode for J2EE server.
Thanks and Regards,

How can I make a "property node" for a VI?

Hello!
If I add a boolean button on the FP then I am able to make a property node for that button in the Block Diagram. But how can I make a property node for a VI? I have several VI:s an that together is one program. What I need to do is to verify what kind of VI some of my VI:s is. I need to verify if it is .exe or .vi-file, and if it is .exe then I want to disable run, abort, run continuously bottons otherwise not. I have hard that this is possible to do programmaticaly but I can´t figure out how. I am aware that I could do that manually in the File->vi properties->customize->windows appearance but theese choises makes it last forever.
I want to be able to stop and run and everything if it is a .vi file, but if it is .exe-file then all those buttons should be disabled.
Anyone have an example on this?
In an other message at this Forum I read "You can use the `Front Panel Window. Allow Runtime PopUp`" property to disable run-time shortcuts menues programmaticaly, but still I dont know how to create this property node.
/Amir

You really shouldn't open a new thread. If you don't understand something, ask and we will explain it.
Like I said in the other thread, you can check if you are running in LV or an EXE by using the Application>>Kind property. To get it, place a property node (from the Application Control palette) on the diagram, click it and find the property.
To set the properties for the VI, place another property node, right click it and select Select Class>>VI Server>>VI. You should have the properties you want under Front Panel Window.
To learn more about LabVIEW, I suggest you try searching this site and google for LabVIEW tutorials. Here and here are a couple you can start with. You can also contact your local NI office and join one of their courses.
In addition, I suggest you read the LabVIEW style guide and the LabVIEW user manual (Help>>Search the LabVIEW Bookshelf). I believe chapter 17 of the user manual explains about programmatic control of VIs.
Try to take over the world!

How to change color of a button for specific time interval in jsp

How to change color of a button for specific time interval in jsp.
Please help.
Thanks in advance.

This was driving me crazy, too--and the previous answers did not seem to work. I eventually found that if I click one of the data symbols in the graph in exactly the right spot (see below), it selects only the data symbols and not the line. I can tell this because the little selection dots will be around each data symbol, but no selection dots will be on the line between the data symbols - like the graphic in Yvan's answer. Then and only then will the color symbol in the tool bar show the color of the data symbol, instead of the color of the line. I believe that you then have to first click on the color swatch in the toolbar and then select your color (or choose Show Colors and select from the color tool). Just clicking a color in the crayon box, for example, did not seem to work unless I first clicked on the color swatch in the toolbar, then clicked Show Colors on that dropdown, and +only then+ clicked the crayon or whatever.
_The right spot to click_ seems to be just above the exact center of the data symbol, at least for the diamond shape symbol that I prefer. Sometimes it takes several tries to hit the right spot. If I miss it, the whole line is selected, which is indicated by the little selection dots on the line, between the data symbols. When I click the right spot, those selection dots go away, leaving only the data symbols selected. Then I can change the color, as described above.
I hope this works for you too.

How to change the Content-Transfer-Encoding for the fmddataa.fmd from base

Dear all,
When I using this SO_DOCUMENT_REPOSITORY_MANAGERto send email,I find the fmddata.fmd file have been changed to binary file attachment. I don't hope so.any one have good idea to avoid this case occur?
Can you tell me how to change the Content-Transfer-Encoding for the fmddata.fmd from base64 to quoted-printable. The quoted-printable is the Content-Transfer-Encoding for text file with extension .txt
Best Regards,
Merry

Thank you

How to change sentence Case in Pages for ios

Hi,
does anyone anyone know how to change sentence case in Pages for IPad.
I Mean from UPPER CASE TO lower case.

The IOS version of Pages has no Format > Font > Capitalization facility to transform uppercase text into other case forms. You need to use Pages v5.2.2 on OS X, or export to Word, and use most any other Word compatible word processor. If it is a couple of words, then retype them in the appropriate case.

How to change the UWL refresh rate for all portal users.

Hi Portal Experts,
How to change the UWL refresh rate for all portal users?
Users can individually change the refresh rate through "Personalise View" in UWL.But we want this to set it for all users(we have 10k portal users).
It was defaultically set to 5 mins for all users.How to change this to 20 mins.
Thanks
Sony.

1.      Launch the UWL iView configuration page.
You can access the iView from the UWL administration pages (System Administration ® System Configuration). Navigate to the property editor as follows:
      From the Universal Worklist Systems, choose the system for which you want to edit the properties.
    Choose Edit.
may be you can get clear help from below help file
http://help.sap.com/saphelp_nw04s/helpdata/en/eb/101fa0a53244deb955f6f91929e400/frameset.htm
regards
nagaraju

How to change or add new ext for video?, How to change or add new ext for video?

How to change or add new extensions for video player???

Hi,
Please try to use Explicit Commit work to save the changes.
check if there in any BAPI FM related to this.
Please check the structure you have passed for these fields.
check the Item category for BOM items - POSTP in table T418. if the entry exists then try to add the values again.
Thanks & Regards,
Chandralekha.

How to change the contact sync settings for icloud? please advise

how to change the contact sync settings for icloud? please advise?

There are no settings to change. Assuming you are using Lion 10.7.2 (or 10.7.3) - which you should be - you simply sign in in System Preferences>iCloud and check 'Contacts' and any other data you want to sync.
If you are using an earlier system you will not be able to sync your contacts, and there is no workaround. However you can sync them with Google or Yahoo contacts, though I don't know how well this works.

How to change phone number on iPad for facetime

How to change phone that provides number for iPad FaceTime

The iPad is not a phone. Facetime and iMessage are only compatible with iOS devices. To add a phone number, you must do so from an iPhone.

How to change to sound of notifications for apps like whatsapp, viber,

How to change to sound of notifications for apps like whatsapp, viber?

Use either the settings section within the app or the Sounds area of the Settings app. It all depends on how the app is programmed.
Settings > Sounds > select the app and change the sound.

How to change icon of a node or root node of a JTree

i have a JTree with a root node, and leaf nodes. i want to change their icons. how can i do this?
thanks

Here's a search of the forums with the words 'tree', 'icon' and 'node' in the title
http://onesearch.sun.com/search/developers/index.jsp?and=jtree+icon+node&nh=10&phr=&qt=&not=&field=title&since=&col=devforums&rf=0&Search.x=28&Search.y=15
I looked at a couple and #5 seems interesting, but there are quite a few to choose from.

How do i add a root node to a XMLType

Hi all
I have a problem inserting a root node in a xml document generated by DBMS_XMLGEN.newcontextfromhierarchy. The function get_site_map_nodes generates a document like this:
<?xml version="1.0"?>
<siteMapNode f_page_id="1" title="rot" PATH="1">
<siteMapNode f_page_id="2" title="1.1" PATH="1.1">
<siteMapNode f_page_id="4" title="1.1.1" PATH="1.1.1"/>
</siteMapNode>
<siteMapNode f_page_id="3" title="1.2" PATH="1.2"/>
<siteMap/>
</siteMapNode>
This is correct but i want to add a root node so the result shows as below:
<?xml version="1.0"?>
<siteMap>
<siteMapNode f_page_id="1" title="rot" PATH="1">
<siteMapNode f_page_id="2" title="1.1" PATH="1.1">
<siteMapNode f_page_id="4" title="1.1.1" PATH="1.1.1"/>
</siteMapNode>
<siteMapNode f_page_id="3" title="1.2" PATH="1.2"/>
<siteMap/>
</siteMapNode>
</siteMap>
The problem is that i have no clue how to accomplish this.
Best regards
Daniel Carlsson
PACKAGE BODY PKG_PAGE_STRUCTURE
IS
FUNCTION get_level_path (in_page_id IN page_structure.f_page_id%TYPE)
RETURN VARCHAR2
IS
l_path VARCHAR2 (4000) := '';
BEGIN
SELECT MAX (SYS_CONNECT_BY_PATH (f_show_order, '.'))
INTO l_path
FROM page_structure
START WITH f_page_id = in_page_id
CONNECT BY PRIOR f_parent_page = f_page_id;
l_path := RTRIM (l_path, '.');
RETURN l_path;
END get_level_path;
FUNCTION get_site_map_nodes (in_page_id IN page_structure.f_page_id%TYPE)
RETURN XMLTYPE
IS
qryctx DBMS_XMLGEN.ctxhandle;
l_xml XMLTYPE;
BEGIN
qryctx :=
DBMS_XMLGEN.newcontextfromhierarchy
('select level, xmlelement("siteMapNode", XMLAttributes(f_page_id as "f_page_id",
f_title_phrase as "title", pkg_page_structure.get_level_path(f_page_id) as path))
FROM PAGE_STRUCTURE
START WITH f_page_id = :in_page_id
connect by f_parent_page = prior f_page_id
ORDER siblings BY f_show_order'
DBMS_XMLGEN.setbindvalue (qryctx, 'in_page_id', TO_CHAR (in_page_id));
l_xml := DBMS_XMLGEN.getxmltype (qryctx);
DBMS_XMLGEN.closecontext (qryctx);
RETURN l_xml;
END get_site_map_nodes;
END PKG_PAGE_STRUCTURE;
CREATE TABLE page_structure
(f_page_id NUMBER(10,0) NOT NULL,
f_parent_page NUMBER(10,0),
f_show_order NUMBER(10,0),
f_title_phrase VARCHAR2(20),
f_created_by NUMBER(10,0),
f_created_date DATE,
f_updated_by NUMBER(10,0),
f_updated_date DATE)
INSERT INTO page_structure
(F_PAGE_ID,F_PARENT_PAGE,F_SHOW_ORDER,F_TITLE_PHRASE,F_CREATED_BY,F_CREATED_DATE,F_UPDATED_BY,F_UPDATED_DATE)
VALUES
(1,NULL,1,'rot',1,'30-MAR-2006',NULL,NULL)
INSERT INTO page_structure
(F_PAGE_ID,F_PARENT_PAGE,F_SHOW_ORDER,F_TITLE_PHRASE,F_CREATED_BY,F_CREATED_DATE,F_UPDATED_BY,F_UPDATED_DATE)
VALUES
(2,1,1,'1.1',1,'30-MAR-2006',NULL,NULL)
INSERT INTO page_structure
(F_PAGE_ID,F_PARENT_PAGE,F_SHOW_ORDER,F_TITLE_PHRASE,F_CREATED_BY,F_CREATED_DATE,F_UPDATED_BY,F_UPDATED_DATE)
VALUES
(3,1,2,'1.2',1,'30-MAR-2006',NULL,NULL)
INSERT INTO page_structure
(F_PAGE_ID,F_PARENT_PAGE,F_SHOW_ORDER,F_TITLE_PHRASE,F_CREATED_BY,F_CREATED_DATE,F_UPDATED_BY,F_UPDATED_DATE)
VALUES
(4,2,1,'1.1.1',1,'30-MAR-2006',NULL,NULL)
/

Please try below steps.
1. Complete Prerequisite for adding cluster node
2. Verify the node is accessible to all other nodes in the cluster. Run the following command from the existing node in the cluster.
cluvfy stage -pre crsinst -n newNode
3. Run cluvfy from any existing node
cluvfy stage -pre nodeadd -n <New Node>
Note : If cluvfy in above step shows any errors fix those and then proceed with this step
4. Change Directory to Clusterware Home and execute addNode scripts from any existing node.
cd $CRS_HOME/oui/bin
./addNode.sh -silent "CLUSTER_NEW_NODES={ <NewNode > } CLUSTER_NEW_PRIVATE_NODE_NAMES={ <Interconnect >} CLUSTER_NEW_VIRTUAL_HOSTNAMES={ < Virtual Host Name >}"
At the end of addNode, script will prompt to run for root.sh on newly added node.
5. Verify Node is successfully added
cluvfy stage -post nodeadd -n <NewNode >
6. Verify CRS Stack is running on the new Node.
$CRS_HOME/bin/crs_stat -t
7. To extend the Oracle RAC Installation to include the new Node, run addNode from $ORACLE_HOME/oui/bin from existing node in the cluster
cd $CRS_HOME/oui/bin
./addNode.sh
When OUI displays the Specify Cluster Nodes to Add to Installation window, select the node to be added, then click Next .
Verify the summary and run root.sh on new node when it prompts.
8. Adding New Instance on the New Node
$CRS_HOME/bin/lsnrctl status
9.Run $ORACLE_HOME/bin/dbca from any of the existing RAC Instances Oracle Home.
Select Oracle Real Application Clusters database , and then click Next .
Select Instance Management , and then click Next .
Select Add an Instance , then click Next .
Click Next to accept default instance name or it can be changed.
Check the summary window.
Note: Please check these steps in test environment first.
HTH

How to change a generated root node for a hierarchy?

Similar Messages

Maybe you are looking for