How to change an event in Event structure Automatically?

Hi,
I want to change an event automatically when a boolean value change occurs.I tried with a blinking LED but it didn't work.Can any one help?
Please Mark the solution as accepted if your problem is solved and donate kudoes
Solved!
Go to Solution.
Attachments:
Event.vi ‏11 KB

Just to warn you, the Value Change (signaling) property will cause the event to be fired, even if the value did not change. So you really should have some logic to figure out if it actually changed.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

How to change color of iCal event, without changing the calendar.

I have my work Exchange calendar imported to iCal. When I want to change the color of an event in iCal, it actually changes the event to a differnet 'calendar' and therefore no longer shows up on my work calendar. This wouldn't be a problem, excpet my secretary can no longer see the event on my work calendar that shows up on her PC. So how can I change the color of 1 event, say to 'Important' or 'Must Attend', without changing the calendar?

Welcome to the discussions, spet.
Right click (Control-click) the calendar you want to change in the left pane and select Get Info. There is a colour selection button to the right of the calendar name..
AK

How to change location of files (folder structure to storing in iPhoto lib)

I need help.
I thought I was smart, but as is always the case, I find out that I am not
I did not trust iPhoto at first. So I retained my images in my 8 years of folder structure (by year and then subfolders of months).
My lib is getting large, 7000 plus images, and when importing images (I do not have the setting for imported images to be stored to iPhoto Lib) and wanting to delete some, I find it more work than is necessary.
Bottom line: Can someone tell me if there is a way to change the setting (of course there is) but also to reimport, or move, my images that are already in iPhoto (but are really just previews referencing to my folder structure) so that they will reside in the iPhoto Lib?
When I import it finds duplicates...if I say do not import then it does not go any further...but if I say "yes, import duplicates" then it brings them in as duplicates...which means I have two copies, but only one retains all of the keywords etc.
Another bottom line: I want to retain my keywords in my current library, but move all images into the iPhoto lib instead of my folder structure. I can do this from this date forward, but I want to get the entire lib to be this way.
Help?

read through this thread - it should help you
http://discussions.apple.com/thread.jspa?threadID=1125431&tstart=45
Larry Nebel

How to change the input variable xml structure before invoking an ext. serv

Hi all;
I have a bpel. in my bpel i have an invoke activity which calls an external webservice. I call my bpel with the input below.
*<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">*
*<SOAP-ENV:Body>*
*<requestCustomerAccountBalance xmlns="http://impl.ejb.service.almanak.baca.turkcelltech.com/">*
*<header xmlns="http://impl.ejb.service.almanak.baca.turkcelltech.com/">*
*<application xmlns="http://impl.ejb.service.almanak.baca.turkcelltech.com/">CSI</application>*
*<operationDate xmlns="http://impl.ejb.service.almanak.baca.turkcelltech.com/">03/14/2011 14:51:37</operationDate>*
*<operationName xmlns="http://impl.ejb.service.almanak.baca.turkcelltech.com/">CSI</operationName>*
*<transactionId xmlns="http://impl.ejb.service.almanak.baca.turkcelltech.com/">3424342</transactionId>*
*<userId xmlns="http://impl.ejb.service.almanak.baca.turkcelltech.com/">tuba</userId>*
*</header>*
*<msisdn xmlns="http://impl.ejb.service.almanak.baca.turkcelltech.com/">5356474828</msisdn>*
*<applicationName xmlns="http://impl.ejb.service.almanak.baca.turkcelltech.com/">CSI</applicationName>*
*<channel xmlns="http://impl.ejb.service.almanak.baca.turkcelltech.com/">CSI</channel>*
*<clientTimeStamp xmlns="http://impl.ejb.service.almanak.baca.turkcelltech.com/">03/14/2011 14:51:37</clientTimeStamp>*
*<transactionId xmlns="http://impl.ejb.service.almanak.baca.turkcelltech.com/">3424342</transactionId>*
*<accountType xmlns="http://impl.ejb.service.almanak.baca.turkcelltech.com/">ACC</accountType>*
*</requestCustomerAccountBalance>*
*</SOAP-ENV:Body>*
*</SOAP-ENV:Envelope>*
Before invoking the ext. service i want to change the input as follows.
*<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:impl="http://impl.ejb.service.almanak.baca.turkcelltech.com/">*
*<soapenv:Header/>*
*<soapenv:Body>*
*<impl:requestCustomerAccountBalance>*
**
*<header>*
**
*<application>?</application>*
**
*<operationDate>?</operationDate>*
**
*<operationName>?</operationName>*
**
*<transactionId>?</transactionId>*
**
*<userId>?</userId>*
*</header>*
**
*<msisdn>5356474828</msisdn>*
**
*<applicationName>CSI</applicationName>*
**
*<channel>CSI</channel>*
**
*<clientTimeStamp>20101010</clientTimeStamp>*
**
*<transactionId>676767</transactionId>*
**
*<accountType>ACC</accountType>*
*</impl:requestCustomerAccountBalance>*
*</soapenv:Body>*
*</soapenv:Envelope>*
HOW TO ACHIEVE THIS.???
Any comment would be appreciated.
Best Regards

You can go through the below thread for removing the namespce
Removing namespace from xml created
http://beatechnologies.wordpress.com/2008/09/25/stripping-namespace-from-an-xml-using-xquery/
Edited by: 333333 on Mar 17, 2011 6:44 PM
Edited by: 333333 on Mar 17, 2011 6:45 PM

Change calendar format one event at a time?

How do Change calendar format one event at a time?

Use iPhoto>Provide iPhoto Feedback in iPhoto or go here to make a feature request of Apple:
http://apple.com/feedback

How do you change the color of events on ICal.

How do you changed the color of events on ICal? I was able to do this when I utilized ICal on the Snow Leopard system but can no longer do this with Lion.
I know that I can select the Calanders list, but when I create a new "Calander" it doesn't allow me to choose a color and it doesn't show up in my list when working within an event.
Thanks!

Phoebe,
Right-click on the new calendar and select "Get Info."
Make sure that the ✓ mark is selected.
Then choose the color from this pane:

I have downloaded IOS7 on my iPhone and all calendar events have disappeared. The general functions of the calendar have changed and are definitely not 'user friendly'. How can I retrieve my calendar events. Will Apple improve the calendar function

I have downloaded IOS7 on my iPhone and all calendar events have disappeared. The general functions of the calendar have changed and are definitely not 'user friendly'. How can I retrieve my calendar events. Will Apple improve the calendar function or revert to the previous system. Even the typing function on IOS 7 is faulty - very slow to respond to the keyboard. I no longer enjoy using my iPhone. Can anyone assist. Thank you

Very strange! All of my calendar events have reappeared. This has happened one week after downloading iOS 7
The calendar however, is not easy to use.
The typing function on the phone has become even slower. Have to wait for each letter to show on screen.

G'day. I am using iMovie 11 and need to clear disk space. How can I do that using an external drive, leaving me the option to go back and make changes or access old events or projects from that external drive?

G'day. I am using iMovie 11 and need to clear disk space. How can I do that using an external drive, leaving me the option to go back and make changes or access old events or projects from that external drive?

The slightly bigger question is whether you want to move all movie content to the external drive (essentially meaning that drive will always need to be attached when you're working with your videos), or whether you just want to archive older videos off to the external drive.
If you want to move all videos, then just move the 'Movies' folder in your home directory to the external drive, then create an alias of the external 'Movies' back in to your home directory. Now the 'Movies' icon in your home directory will point to the external drive and everything will just work (as long as the external drive is attached when you launch iMovie)
If you want to archive older movies then each Movie should have its own subdirectory within your Movies folder. These can easily be moved off to the external drive, and moved back should you ever need to work on those movies again.

Change the condition in event structures

Hi all,
I am a student, currently doing a project. I'm very new to labview and I don't really know much of the function in labview. Anyway, I have this timer made using event structure if I'm not mistaken (I downloaded this timer from one of the post in this forum). This timer will start at 0s, count to 20s, then stop. So what can I do to change the end time of this timer?? Let's say stop at 50s??
Attached is the program. Kindly please explain to me or modify the program and attached back as a reply. I've been trying to figure it out from the help function, but still don't understand.
Thank you very much in advance!!!
Solved!
Go to Solution.
Attachments:
TIMER s.vi ‏13 KB

Hi,
Thanks for your inquiry. The VI attached uses a couple of programming structures: While loop, Event structure and Case structure. What you would have to change is actually the case structure. Before we go to that, let us go through the different structures. Open up the block diagram by going to the Menu bar of the front panel and navigate to Window->Open block diagram.
The While loop is like a Do Loop in text based programming. It will execute until a condition is met. From the attached VI, it stops running when you click the exit button.
The Event structure is a structure which consists of subdiagrams. The structure responds to interactions with front panel objects. For example, if you click the start or stop button in the front panel, the event structure will switch to a case which corresponds to this interation. In the attached VI, the case, which corresponds to intreaction with the start or stop button, is called "Start", "Stop": Value Change. Each case will contain an event-handling routine.
Case structures are like switch statements in text programming. Take a look at the "Start", "Stop": Value Change event. It contains a routine which consists of a case structure. The case structure responds to the input terminal called Start (which is actually the start button on the front panel). The case structure switches between cases according to this input. To view the different cases just cycle through the case structure by clicking the left and right buttons. There are only two cases: True or False as the input is a boolean.
Now lets take a look at the VI. Take a look at the "Timeout" case of the event structure. This is where the modification needs to be made. Modify the case structure by editing the cases. Change the numbers in case structures: ..20000 to ..50000 and 20001.. to 50001.. This should do the trick.
Regards,
Alan Bong

Event Library-how to change date set at 2005 ?

Hi,
The as yet empty Event library shows 2005. (top left in FCP X) I can't figure out on how to change that. I assume it's a date ?
thank you

Hi Ram,
We will load delta Intial with data transfer every weekend , and we run delta everyday , because we do delta init with data transfer with selections say ( 01.20011 to 12.2003 ) every weekend , hope I need to create new delta infopack with new data selections say ( 01.2004 to 12.9999) only to get update data in Infocube.
Please correct me if I am wrong .
Regards
hari

How can we track the entire event in which the form mode gets changed?

If the form is in OK Mode and if the user edits any field(Including UDF Window Fields). form mode changes to Update...So at that time, how can we track the entire event in which the form mode gets changed?
Thanks
Hari

Dear hari angamaly,
You could get the form mode by FormMode Property in ItemEvent Object in UI API.
Best Regards
Jane Jing
SAP Business One Forums team

My calendar keeps deleting new events and if I make a change to an old event it keeps reverting it back to its original time. How do it stop this from happening?

My calendar keeps deleting new events and if I make a change to an old event it keeps reverting it back to its original time. How do it stop this from happening?

How do you update it? Basically what has happened my password was disabled for "security reasons" on sunday (21/10/12), so i tried to reset it, but for some reason i couldnt get into my old email (probably because i havent used it for 2 years), so i read on here i could swap it to a new email that i currently use (which is what i have done) ive swapped everythin over to it (facetime, iCloud etc) but keeps coming up with old email and asking for password

How to change calendar setting for one event in a repeating series?

Is there any way to change the calendar setting (color) for a single event in a repeating series without changing the color of all events in that series? It seems one event in a repeating series is linked to all other events in that series even if you change the time and/or date first.
The only workaround I've found is to create a new event Identical to the event in question except with the different calendar, then delete the original event. This would be a lot easier if the OS would ask the user if s/he wants to apply the calendar change to all future events or just this one. Or if there was a way to more easily duplicate a single event, that would also save me a lot of time.
Thanks for any responses.

The assignment of colors to calendars on your iPad is pretty simplistic. You can set a color for each calendar and all events (repeating or single instance) placed in a calendar use the calendar's color; however, you cannot set a color for one instance of a calendar event. The workaround you came up with is similar to the method I use. I have a calendar labeled "Priority Events" (Red) that I use for important instances of standing meetings. Oftentimes I leave the event in question in the calendar and simply place a priority event in the same time slot; it clutters up the calendar a bit but helps me visually.

How can I check and change the system set events trace level?

Dear all:
How can I check the system set events trace level? I don't want the alert_log so big.
Regards
Terry

Hi Terry;
Please check :
How to determine which system events are currently being set? [ID 845043.1]
How To List All The Named Events Set For A Database [ID 436036.1]
How to set EVENTS in the SPFILE [ID 160178.1]
Also check:
http://www.dba-oracle.com/t_grid_rac_events_in_Oracle.htm
http://www.akadia.com/services/ora_events.html
Hope it helps
Regard
Helios

Change the colour of events in iCal

I need to change the colour of events/appointments in the Mac iCal. I have imported all of my Outlook calendar via google sync and all my appointments are now just one colour. I have my medical appointments coloured in orange so they stand out each week (I have many) and all my personal events a different colour, and my volunteer work a different colour so that I can see at a glance in week view what I am up to. Looking at one week with every appointment in one drab colour is not nice.
I notice that different calendars are different colours, but I dont want separate calendars as I need to sync with google to share the calendar with Android phone and iPad.
Please can you let me know how to turn this feature on. Many thanks.

Click calendars at the bottom of the page the click on the i symbol for info and then you can select the colour you'd like.

How to use the table maintenance events for validating the input entries..?

Hi,
I have created a Z table with 6 fields in which all are KEY fields. All are of CHAR type. I have created the Table Maintenance Generator for the same. While maintaining the entries in the table, even though I maintain a blank entry for a field it is saving the entry. But, I don't want that way. All the fields are mandatory in my table. One should enter all the fields. Otherwise it should not allow to save the entry. So, I think it can be done using the Table Maintenance Events. can someone tell me how to use the Table Maintenance Events. and which event to use for my reuqirement and what is the logic to be written.
Or Is there any other way to solve my problem.
Please share your inputs. Thanks in advance.
Best regards,
paddu.

In the table maintenance generator, Environment --> Modifications --> Events then a screen will be appear here,we need to create the Events.In the EVENTS screen, press new Entries, there give 01(Before Saving the Data in the Database) and give a name(This will become a PERFORM), then click the Editor pushbutton, this will be there at the right side of the entry, then a popup will be appear, you can create an include program, there inside of the include program write ur code.
Here is documentation for Event 01(Before Saving the Data in the Database )
Event 01: Before Saving the Data in the Database
Use
This event occurs before new, changed or deleted entries are written to the database. Other activities can be performed, for example:
hidden entry processing
fill hidden fields
flag data to be written to hidden tables after the database change.
To have the changes saved by the central maintenance dialog routines, SY-SUBRC must be set to 0 at the end of the routine.
Realization
This event has no standard routine. The following global data is available for the realization of the user routine:
internal table TOTAL
field symbols
field symbols <ACTION> and <ACTION_TEXT>
<STATUS>-UPD_FLAG
If internal table data are to be changed before saving, t he changes should be made in both the internal table TOTAL and in the internal table EXTRACT.
FORM abc.
DATA: F_INDEX LIKE SY-TABIX. "Index to note the lines found
LOOP AT TOTAL.
IF <ACTION> = desired constant.
READ TABLE EXTRACT WITH KEY <vim_xtotal_key>.
IF SY-SUBRC EQ 0.
F_INDEX = SY-TABIX.
ELSE.
CLEAR F_INDX.
ENDIF.
(make desired changes to the line TOTAL)
MODIFY TOTAL.
CHECK F_INDX GT 0.
EXTRACT = TOTAL.
MODIFY EXTRACT INDEX F_INDX.
ENDIF.
ENDLOOP.
SY-SUBRC = 0.
ENDFORM.
Regards,
Joy.

How to change an event in Event structure Automatically?

Similar Messages

Maybe you are looking for