How to change char 'a' to char 'p'?

I writing a code where I take a String. Search through all the alphabet in it, for every occurrence of 'd' I convert it to 'p'.
To begin with I am converting the String to char[].
char[] charText = stringText.toCharArray() // Sample code Then I am searching through the array using a for loop
for (int i = 0; i <= charText.length; i++{ // Sample code
if (charText[i] == 'd');
}I cant think of the logic to convert 'd' into 'p'. Can some one please help me with the logic to convert 'd' into 'p'?
many thanks
M

merit wrote:
Many thanks.You're welcome.
You use replace() - and replaceAll() mentioned by Dom - instead of creating a char array and using a loop. There is an example of replace() at the place I linked to. Be aware that replaceAll() uses regular expressions and, so, may have surprising effects. Since you asked about replacing all occurances of one character with another, replace() seems more straight forward.
Read the link, write some code and post if you get stuck.

Similar Messages

How to changing char. values and create new lines in C_TH_DATA

Hi experts,
we need to distribute the cost of some sender costcenters to the corresponding receiver costcenters.
We have already created a DSO and maintained this with the sender and receiver costcenter. We use this lookup table later in the execute method of our created planning function type to take the sender costcenter and distribute this to the corresponding receiver costcenters.
I've already implemented an IP planning function based on planning function type for this process.
At the end when I debug the method I see that this works fine. I give you an example:
I have in my lookup table the following record:
sender costcenter           receiver costcenter            distribution percent
4711                                    4712                                    75
4711                                    4713                                    25
Based on those records in the lookup table I've to distribute the cost of sender costcenter to the receiver costcenters.
Just imagine I would get this record from c_th_data:
sender costcenter    costelement     value
       4711                 3000111         100
I have to have the following result after running the exit planning function:
   costcenter    costelement     value
       4711                 3000111         100                   -> without changing
       4711                 8000111        -100
       4712                 8000111           75
       4713                 8000111           25
When I debug the exit function I see in the execute method that c_th_data will be filled correctly. I see exactly the records that I want to see.
But once the function is finished I don't see this result. I also checked the conversation
Changing Char Value in IP C_TH_DATA
but I can't understand what happens after my coding yet.
Can anyone help me or give me an advice what could be the problem here?
Thank you all in advance for your support.
Kind regards,
Ali

Hi Ali,
The planning function generates the records in delta mode. I am explaining the concept taking your example only:
Records in cube before running PF:
sender costcenter           receiver costcenter            distribution percent
4711                                    4712                                    75
4711                                    4713                                    25
sender costcenter    costelement     value
       4711                 3000111         100
       4712                 3000111         100
       4713                 3000111         100
The records that you need to generate from code(Previous ones need to be changed):
sender costcenter    costelement     value
       4711                 3000111         000
       4712                 3000111         175
       4713                 3000111         125
**Please note that you dont need to generate any corrections(delta records), you only need to generate the final values in the records and the PF will generate the delta's on its own. Also in this case you should see 3 Records Read, 0 Deleted, 3 Changed.
Please let me know if you need any more clarification,
Thanks,
Puneet

How to change one character string to char

hi all
i got string but only one character
i got 1,2,3,E
since i got 'E' here..........
i need to convert to it to character....
but how to change it.... i only know String to integer using Integer.parseInt() method....
but i don't know about char...................

You should really check the API first:
http://java.sun.com/j2se/1.4.2/docs/api/index.html
Take a look at String.charAt(int index) method.
/Kaj

How to center chars inside of cells of the comb field (text field)?

Hello gurus,
[Intro]
I'm working on preparation of the legal form for tax return. Due to sophisticated form structure and customer's demand to prepare return of enourmous size (more than thusand pages) I decided to remake obsolete form using "comb of" option in order to reduce size of the source and prevent memory allocation issues on customer side.
[Issue details]
Legal requirement is to have typeface Courier New 16pt-18pt and cells of the certain size.
This is how the form provided by tax authorities looks like:
Here you can see that chars are somehow centered inside of the cells but when I create comb in my livecycle designer it is not the case and I have different layout:
Look how letters are placed inside of the cells. After some research I've found out that there is a left margin which always exists in every cell of the comb, most probably triggered by the border. Tried to edit XML source but didn't achieve any significant success. The issue is not caused by the narrowness of the cells and reproductible even with extra wide ones.
Here is my current XML:
          <field h="5.7mm" name="STR_230_TOT_TX" w="60mm" x="4.264278in" y="4.458417in" anchorType="middleCenter">
               <ui>
                  <textEdit hScrollPolicy="off">
                     <border hand="right">
                        <edge stroke="dotted"/>
                        <corner stroke="dotted" thickness="0.176mm"/>
                     </border>
                     <margin bottomInset="0mm" leftInset="0mm" rightInset="0mm" topInset="0mm"/>
                     <para hAlign="left" vAlign="top"/>
                     <comb numberOfCells="15"/>
                  </textEdit>
               </ui>
               <font size="16pt" typeface="Courier New"/>
               <margin bottomInset="0mm" leftInset="0mm" rightInset="0mm" topInset="0mm"/>
               <bind match="dataRef" ref="N140_TAX_AMOUNT"/>
               <assist>
                  <speak disable="1"/>
               </assist>
            </field>
This is how comb field is supposed to be rendered (screenshot from the documentation):
Everything is centered and it is a behaviour I supposed to see.
Are there any possible solutions how to place chars at center of the cells?

Hi Igor,
It's the font that you are using that causes the problem.
I found it weird, your problem, so I quickly made a form with a text field with a comb. I did not have the problem.
So I took your snippet and added it to my form, then I have the same problem. You are using Courier New, a font that has the same width for all characters. I don't know why the problem is there as for me it should be in the center as with all other fonts. I would report this as a bug to support.
I know it's not a solution for you, but that seems to be the root of the problem. Maybe you can look for another font, similar to Courier New, but that does not have a fixed width. I looked it up and it appears that there's a font called Hellschreiber, that uses the same letterforms, but is proportional. The font is not freely downloadable, so I cannot test for the moment. Another page says this: "There is a proportional font that kinda looks like Courier. It is called American Typewriter. " Again, I have not tested.
Hellschreiber Serif is a proportional typeface using Courier letterforms as a basis.
http://en.wikipedia.org/wiki/Courier_(typeface)

Variant Config - Changing char value on Prod Order component

Experts,
We have a situation where we need to manually add Material Variants as components on a given Production Order's component list. This is in cases where stock for the material variant is available & can be used.
We use ECC 6.0 with certain features of DIMP (SDUD) turned on for Mill Products (along with Variant Config). After adding the Material Variant on the Production Order, we want to edit/change/add characteristic values to the Class 300 characteristics. I've tested this & while it is possible for a configurable material, system does not allow to change char values on the material variant.
Does anyone know of a way to enhance the system in order to achieve this?
Thanks

Just a thought.
let's assume the characteristic you want is called CHAR.
Then create a dummy characteristic called DUMMY. Create values 'ASSIGNED' and 'BLANK' for DUMMY.
Create a dependency for the values of DUMMY
for 'ASSIGNED':
CHAR SPECIFIED
for 'BLANK':
NOT SPECIFIED CHAR
Then go back in each value of characteristic CHAR and create another dependency as follows:
DUMMY eq 'ASSIGNED'
that way the system should only display those values of CHAR for which DUMMY has a value...
It's a bit of a circular thought I know... Not implemented anything like it myself but it just might work

How to change the color of specific row in ALV tree

Hi,
I m using method set_table_for_first_display of a class CL_GUI_ALV_TREE.
The req is to change the color of specific row. Now can anybody tell me how to change the color of ALV tree. As in ALV tree and in this method 'set_table_for_first_display', there is no parameter IS_Layout.
Pls suggest...

hi
hope this code will help you.
Reward if help.
REPORT zsharad_test1.
TABLES: ekko.
TYPE-POOLS: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
line_color(4) TYPE c, "Used to store row color attributes
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_ekko TYPE t_ekko.
*ALV data declarations
DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE,
gd_tab_group TYPE slis_t_sp_group_alv,
gd_layout TYPE slis_layout_alv,
gd_repid LIKE sy-repid.
*Start-of-selection.
START-OF-SELECTION.
PERFORM data_retrieval.
PERFORM build_fieldcatalog.
PERFORM build_layout.
PERFORM display_alv_report.
*& Form BUILD_FIELDCATALOG
Build Fieldcatalog for ALV Report
FORM build_fieldcatalog.
There are a number of ways to create a fieldcat.
For the purpose of this example i will build the fieldcatalog manualy
by populating the internal table fields individually and then
appending the rows. This method can be the most time consuming but can
also allow you more control of the final product.
Beware though, you need to ensure that all fields required are
populated. When using some of functionality available via ALV, such as
total. You may need to provide more information than if you were
simply displaying the result
I.e. Field type may be required in-order for
the 'TOTAL' function to work.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
fieldcatalog-do_sum = 'X'.
fieldcatalog-no_zero = 'X'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'EBELP'.
fieldcatalog-seltext_m = 'PO Item'.
fieldcatalog-col_pos = 1.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'STATU'.
fieldcatalog-seltext_m = 'Status'.
fieldcatalog-col_pos = 2.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'AEDAT'.
fieldcatalog-seltext_m = 'Item change date'.
fieldcatalog-col_pos = 3.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material Number'.
fieldcatalog-col_pos = 4.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'MENGE'.
fieldcatalog-seltext_m = 'PO quantity'.
fieldcatalog-col_pos = 5.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Order Unit'.
fieldcatalog-col_pos = 6.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'NETPR'.
fieldcatalog-seltext_m = 'Net Price'.
fieldcatalog-col_pos = 7.
fieldcatalog-outputlen = 15.
fieldcatalog-datatype = 'CURR'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'PEINH'.
fieldcatalog-seltext_m = 'Price Unit'.
fieldcatalog-col_pos = 8.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
ENDFORM. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
Build layout for ALV grid report
FORM build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
Set layout field for row attributes(i.e. color)
gd_layout-info_fieldname = 'LINE_COLOR'.
gd_layout-totals_only = 'X'.
gd_layout-f2code = 'DISP'. "Sets fcode for when double
"click(press f2)
gd_layout-zebra = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text = 'helllllo'.
ENDFORM. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
Display report using ALV grid
FORM display_alv_report.
gd_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = gd_repid
i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
i_callback_user_command = 'USER_COMMAND'
i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
it_special_groups = gd_tabgroup
IT_EVENTS = GT_XEVENTS
i_save = 'X'
is_variant = z_template
TABLES
t_outtab = it_ekko
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
DATA: ld_color(1) TYPE c.
SELECT ebeln ebelp statu aedat matnr menge meins netpr peinh
UP TO 10 ROWS
FROM ekpo
INTO TABLE it_ekko.
*Populate field with color attributes
LOOP AT it_ekko INTO wa_ekko.
Populate color variable with colour properties
Char 1 = C (This is a color property)
Char 2 = 3 (Color codes: 1 - 7)
Char 3 = Intensified on/off ( 1 or 0 )
Char 4 = Inverse display on/off ( 1 or 0 )
i.e. wa_ekko-line_color = 'C410'
ld_color = ld_color + 1.
Only 7 colours so need to reset color value
IF ld_color = 8.
ld_color = 1.
ENDIF.
CONCATENATE 'C' ld_color '10' INTO wa_ekko-line_color.
wa_ekko-line_color = 'C410'.
MODIFY it_ekko FROM wa_ekko.
ENDLOOP.
ENDFORM. " DATA_RETRIEVAL

How to change the status in the table kssk

Hi ,
In document management system - for a doc type pdf, I am maintaing the class (cl_xxx) in img setting. some charateristics are assigned to that class (with entry required).
My problem is While creating the document (cv01n). I am not assigning the value for that char ( i.e in addition data), eventhough it is mandatory .
In the table kssk , For that particular document , status is set to 5 . how to change the status .
note :
In cv04n - if i search wrt to that charateristic in the classification tab. i am not able to get the value.
Please help me to solv the problem.
Regards,
Rani.

hi you can do like this also if it is a test server..and y had the authoridation..
togo the table -supposekkkk-execute-select a particular record--double click it ---then it will display it in the vertical line..
then put /h in the tcode listbox and put enter--debugg it and change this if code = 'SHOW' as EDIT. execute it and change it and save it..
regards,
venkat.

How to change colors of table col and row header?

Could I change table header colors when run vi ? Is such a thing possible?
ex: Header words color from black changed to green in column 2 of table.

cloud a écrit:
...But I mean is "How to change header words color" not changed cell words color.
tst gave you the answer ! A header cell is just a cell with a -1 value as index...
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...

How to change the Character Set from AL32UTF8 to WE8DEC

Hello!!
I want to know how to change the character set in the database from AL32UTF8 to WE8DEC.
I tried to use the comand ALTER DATABASE CHARACTER SET but I got an error because WE8DEC is not a superset of AL32UTF8.
I need to import tables from a server that uses WE8DEC. So when I do the import to my server, wich has AL32UTF8 , I can't import the rows that include an Ñ.
So I want to change the caracter set to WE8DEC. How can I do it?
Is it needed to change the language configuration? The remote server has AMERICAN_AMERICA, and my server has MEXICAN SPANISH_MEXICO (both uses text in spanish).
Thanks a lot!!

When you export from WE8DEC server what did you use
for NLS_LANG char set? And when importing?
The export was done in another computer because I can't do the export in the server (I have 10g, and the remote server has 9i and the export is not working). In my server, when I tried to do the import, the NS_LANG value was MEXICAN SPANISH_MEXICO.WE8MSWIN1252.
When I try to import to my database I got the error:
import done in WE8DEC character set and AL16UTF16 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)
export client uses WE8MSWIN1252 character set (possible charset conversion)
. importing USRMCR06's objects into PRIMARIZACION
. . importing table "CHG_FONDOS_MARZO_CD_MOR"
IMP-00019: row rejected due to ORACLE error 12899
IMP-00003: ORACLE error 12899 encountered
ORA-12899: value too large for column "PRIMARIZACION"."CHG_FONDOS_MARZO_CD_MOR".
"NOMBRE" (actual: 41, maximum: 40)
Column 1 16623436
Column 2
Column 3 Pymes_1
Column 4

How to change characterics values in a ready input query ?

How to change characterics values in a ready input query base on a real time infocube?
when I use IP to planning I want to change characterices values that have exit in query?

Hi,
On the properties tab of the characteristics (within input query) you can decide what values need to be populated when the query opens.
Is your exit written on char relationship?
regards,
Lokesh Nandula

How to change path in oratab for ASM ?

RAC 11g @Linux RedHat.
In /etc/oratab I have a path to grid home with trailing '/' char. I want to remove it. I stopped cluster, changed /etc/oratab, started cluster but ASM agent overwrote the /etc/oratab. How to change it permanently ? How to persuade ASM agent the correct path ?
Thanks in advance.

I have 2 separate inventory.xml files. One for database home and one for grid. The line form grid inventory.xml:
<HOME NAME="oraGrid11gR2_20121015" LOC="/optware/grid/11.2.0.3" TYPE="O" IDX="1" CRS="true">
while in /etc/oratab is
"/optware/grid/11.2.0.3/"
And ps -ef | grep d.bin shows:
root     30218     1 0 Feb15 ?        00:01:31 /optware/grid/11.2.0.3/bin/ohasd.bin reboot
oracle   30674     1 0 Feb15 ?        00:00:01 /optware/grid/11.2.0.3/bin/mdnsd.bin
nobody   30736     1 0 Jan17 ?        01:54:40 /opt/gmond/bin/gmond -c /opt/gmond/etc/gmond.conf
oracle   31108     1 0 Feb15 ?        00:00:30 /optware/grid/11.2.0.3/bin/gpnpd.bin
oracle   31152     1 0 Feb15 ?        00:01:48 /optware/grid/11.2.0.3/bin/gipcd.bin
root     31188     1 0 Feb15 ?        00:09:14 /optware/grid/11.2.0.3/bin/osysmond.bin
oracle   31370     1 0 Feb15 ?        00:02:28 /optware/grid/11.2.0.3//bin/ocssd.bin <- double '/'
root     31558     1 0 Feb15 ?        00:00:21 /optware/grid/11.2.0.3/bin/octssd.bin reboot
oracle   31584     1 0 Feb15 ?        00:00:18 /optware/grid/11.2.0.3/bin/evmd.bin
root     32638     1 0 Feb15 ?        00:01:29 /optware/grid/11.2.0.3/bin/crsd.bin reboot

How to change default NLS_CHARACTERSET ?

Hi all,
When I try to install iFS with interMedia-Support I always get the errormessage that GERMAN is not supported, thus I can4t install that.
Can anyone tell me how to change the default NLS_CHARACTERSET to US7ASCII ???
Thanks in advance,
Wolfgang
null

hello,
I've got the same message and found only a an insufficient workaround. while generating the database (cave: user-defined) there exists an option, which characterset should be used (e.g. us7ascii) - then the text-functions will work.
but it seems, that you can only use ascii-codes, if you have german text with d's and so on, these chars will be transformed to graphical signs.
maybe there is a chance to retransform them, but i've not found a solution for this problem.
hope this helps
thomas

How to change the visible length in screen painter?

Hi Guys,
we have field in screen which is type to ATWRT but the visible length is set to 11. ATWRT is 30 char.
Please advise on How to change the visible length in screen painter to make it 30?
When I try to edit the defined length from 11 to 30. It wont allow me to.
Thanks a lot!

Hi,
Try the below method:
Goto Screen Painter -> Double click on Input-Output field for ATWRT another screen will appear with attributes of Input Output field -> Increase the Visible length Value there. (Option of visible length is below the Name and Text attribut of Attribute windiw.)
If the Visible length field isn't allowing change then declare it as a Char type instead of taking the DataType for Data Dictionary.
Thanks,
Preyansh
Edited by: DWIVEDP on Mar 29, 2010 12:42 PM

How to change stored procedure with Table Valued Parameter

I am not sure how to change the normal stored procedure with Table Value Parameter.Do I have to create a separate Table or do I have to create a datatype. Can you please help me with this
ALTER PROCEDURE [dbo].[uspInsertorUpdateINF]
@dp_id char(32),
@dv_id char(32),
@em_number char(12),
@email varchar(50),
@emergency_relation char(32),
@option1 char(16),
@status char(20),
@em_id char(35),
@em_title varchar(64),
@date_hired datetime
AS
BEGIN
SET NOCOUNT ON;
MERGE [dbo].[em] AS [Targ]
USING (VALUES (@dp_id, @dv_id , @em_number, @email, @emergency_relation, @option1, @status, @em_id, @em_title, @date_hired))
AS [Sourc] (dp_id, dv_id, em_number, email, emergency_relation, option1, status, em_id, em_title, date_hired)
ON [Targ].em_id = [Sourc].em_id
WHEN MATCHED THEN
UPDATE
SET dp_id = [Sourc].dp_id,
dv_id = [Sourc].dv_id,
em_number = [Sourc].em_number,
email = [Sourc].email,
emergency_relation = [Sourc].emergency_relation,
option1 = [Sourc].option1,
status = [Sourc].status,
em_title = [Sourc].em_title,
date_hired = [Sourc].date_hired
WHEN NOT MATCHED BY TARGET THEN
INSERT (dp_id, dv_id, em_number, email, emergency_relation, option1, status, em_id, em_title,date_hired)
VALUES ([Sourc].dp_id, [Sourc].dv_id, [Sourc].em_number, [Sourc].email, [Sourc].emergency_relation, [Sourc].option1, [Sourc].status, [Sourc].em_id, [Sourc].em_title, [Sourc].date_hired);
END;

It's not clear how you would change the procedure. But assuming that you want to replace the existing scalar parameters with tabular input, this is how you would do it. You first create a table type:
CREATE TYPE Insertor_type AS TABLE
(dp_id char(32),
   dv_id char(32),
em_number char(12),
email varchar(50),
emergency_relation   char(32),
option1 char(16),
status    char(20),
em_id char(35),
em_title    varchar(64),
date_hired    datetime)
Then you change the procedure header:
ALTER PROCEDURE [dbo].[uspInsertorUpdateINF] @tvp Insertor_type READONLY AS
And finally you change the USING clause:
   USING (SELECT dp_id, dv_id , em_number, email, emergency_relation, option1, status, em_id, em_title, date_hired
FROM   @tvp) AS [Sourc] ON [Targ].em_id = [Sourc].em_id
The rest is fine as it is.
Erland Sommarskog, SQL Server MVP, [email protected]

How to change the public display name?

How to change the public display name since the last person left the job and I am not new person take it.

Hello,
The TechNet Wiki Forum is a place for the TechNet Wiki Community to engage, question, organize, debate, help, influence and foster the TechNet Wiki content, platform and Community.
Please note that this forum exists to discuss TechNet Wiki as a technology/application.
As it's off-topic here, I am moving the question to the
MSDN and TechNet Profile and Recognition System forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

How to change char 'a' to char 'p'?

Similar Messages

Maybe you are looking for