How to change program for a transaction

Hi i have one program already assigned to the transaction code.
i want to assign the same transaction code to other program instead of the existing one. please give me steps to change.
thanks in advance
KP

Hi,
Go to SE93 and press chaneg button adn remove the name of the program and assign the new program name to the tcode.
But make sure that the <b>program type</b> is the same otherwise it will dump.
If the type is different <b>delete the TCODE and create it as a fresh.</b>.
Because u have to choose a different option for different program types while u create a TCODE.
Hope this helps.
Please reward points and close the thread if ur query is answered.

Similar Messages

  • How to created exit for CS02 transaction to maintain bom details of a mater

    hi ,
         plz explain how to created exit for CS02 transaction to maintain BOM details of a material. what is the BOM component . give me sample example.

    Hi,
    these are the user-exits for CS02
    Transaction Code - CS02                     Change Material BOM
    Exit Name           Description
    PCSD0001            Applications development R/3 BOMS
    PCSD0002            BOMs: Customer fields in item
    PCSD0003            BOMs: Customer fields in header
    PCSD0004            BOM comparison
    PCSD0005            BOMs: component check for material items
    PCSD0006            Mass changes user exit
    PCSD0007            Check changes in STKO
    PCSD0008            WBS BOM: Customer-specific explosion for creating
    PCSD0009            Order/WBS BOM, determine URL page
    PCSD0010            Order/WBS BOM, determine explosion date
    PCSD0011            Knowledge-based order BOM, parallel update
    PCSD0012            Customer - Mat. number/mat. number during material exchange
    PCSD0013            Customer-specific processing of an explosion for BOM browser
    Regards
    Nilesh

  • How to create program for bapi?

    hi all,
    how to create program for bapi?
    reply me soon now.....
    can anybody help me.....
    thanks,
    S.Suresh.
    Title was edited by:
            Alvaro Tejada Galindo

    Hi ...Here is the step by step procedure for creating BAPIs.
    There are 5 different steps in BAPI.
    - Create BAPI Structure
    - Create BAPI Function Module or API Method.
    - Create BAPI object
    - Release BAPI Function Module.
    - Release BAPI object.
    Step1. Creating BAPI Structure:
    - Go to <SE11>.
    - Select Data Type & Enter a name.
    - Click on Create.
    - Note: Always BAPI should be in a development class with request number (Not Local Object).
    - Select Structure & hit ENTER.
    - Enter the fields from your database. Make sure that the first field is the Primary Key Field.
    - Then SAVE & ACTIVATE.
    Step 2. Creating BAPI module:
    - Enter TR.CODE <SE37>.
    - Before entering any thing, from the present screen that you are in, select the menu
    Goto -> Function Groups -> Create Group.
    Enter a name (Note: This name Must start with ZBAPI)
    Let this screen be as it is and open another window and there, enter TR.CODE <SE80).
    Click on the Third ICON that says Inactive Objects.
    Select the group that you just created and click on Activate.
    Notice that the group you created will disappear from the list of inactive objects.
    - Go back to ><SE37> screen and enter a name and hit <ENTER>. Then enter the group name that you just created and activated.
    NOTE: When you release a function module the respective group will be attached to that particular application. It cannot be used for any other application. NEVER include an already existing group that is attached to another module.
    Now click on the first Tab that says [ATTRIBUTES] and select the radio button that says remote-enabled module since we will be accessing this from any external system.
    Then click on the second tab that says [IMPORT].
    Enter a PARAMETER NAME, TYPE and the structure you created in the first step. Also select the check box ‘Pa’. All remotely enabled functional modules MUST be Pa enabled, where Pa means ‘Passed by Value’ and if you don’t select ‘Pa’, then that means it will be passed by reference..
    Then click on tab that says [EXPORT].
    Enter the following as is in the first three fields
    RETURN TYPE BAPIRETURN (These 3 field values are always same)
    Here also select ‘Pa’ meaning Pass by value.
    Note: BAPIRETURN contains structure with message fields.
    Then SAVE and ACTIVATE.
    Step 3. Creating BAPI object:
    - Enter Tr.Code <SWO1> (Note. It is letter ‘O’ and not Zero).
    - Enter a name and then click on create. Enter details.
    NOTE: Make sure that that Object Type and Program name are SAME.
    - Enter Application ‘M’, if you are using standard table Mara. If you are using your own database then select ‘Z’ at the bottom.
    - Then hit <ENTER>.
    - Now we have to add ‘Methods’. High light METHODS and then select the following from the menu:
    Goto Utilities -> API Methods -> Add Methods.
    - Enter function Module name and hit <ENTER>.
    - Select the second FORWARD ARROW button (>)to go to next step.
    - Check if every thing looks ok and again click on FORWARD ARROW button (>).
    - Then select ‘YES’ and click on <SAVE>.
    - Now on a different screen goto TR.CODE <SE37>. Enter Function Module name and select from the top menu Function Module -> Release -> Release.
    - Goback to TR.CODE <SWO1>.
    Here select the menu combination shown below in the same order.
    - Edit -> Change Release Status -> Object Type Component -> To Implemented.
    - Edit -> Change Release Status -> Object Type Component -> To Released.
    - Edit -> Change Release Status -> Object Type -> To Implemented.
    - Edit -> Change Release Status -> Object Type -> To Released.
    - Then click on <SAVE>.
    - Then click on Generate Button (4th button from left hand side looks like spinning wheel).
    - Then Click on the button that says ‘PROGRAM’ to see the source code.
    To check if this is present in work flow goto TR.CODE <BAPI>.
    Here it shows business object repository.
    - First click on the middle button and then select “ALL” and hit ENTER.
    - Goto tab [ALPHABETICAL] and look for the object that you created. This shows that the BAPI object has been created successfully
    Overall Info :
    http://help.sap.com/saphelp_47x200/helpdata/EN/00/32a43697bc11d1acf9080009b0fb56/frameset.htm
    BAPI Creation Info :
    http://help.sap.com/saphelp_47x200/helpdata/EN/e0/9eb2370f9cbe68e10000009b38f8cf/frameset.htm
    Reference :
    http://help.sap.com/saphelp_47x200/helpdata/EN/00/32a43697bc11d1acf9080009b0fb56/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/EN/00/32a43697bc11d1acf9080009b0fb56/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/EN/e0/9eb2370f9cbe68e10000009b38f8cf/frameset.htm

  • How to change workflow for expired qualification in HR Module

    Hi,
    My question how to change workflow for expired qualification in HR Module.We need to when date is expired tcode OOQA that system will check and that time workflow should be triggred.
    I have serached sap help but i am not understand please below mention URL for SAP help
    Link: [http://help.sap.com/saphelp_47x200/helpdata/en/ee/f4c9cafbab11d29ea40000e8215202/frameset.htm]
    Please explain step by step how to trigrred workflow for expired qualification?
    Please this problem is high and try to solve it.
    Thx!
    Sachin

    Hi,
    Why do you want to trigger a wflow and what do you want to do with this trigger. Can you give more details of your exact requirements.
    But, if you are looking for how to trigger, you can write a small ABAP pgm and schedule it as a job every night. THis job basically reads the table P1000-ENDDA for expiry date and if it reached today, then you can either trigger the wflow with SAP_WAPI_START_WORKFLOW or use SAP_WAPI_CREATE_EVENT to raise your custom event(for Business Obj. BUS7018, i think this is your BO and there are no std events right now, so you will ahve to add your custom event by extending BUS7018 to ZBUS7018).
    Hope I am clear and this helps and if you need more details, reply.
    venu

  • How to change tablespace for a table in 10g?

    Does anyone know how to change tablespace for a table (like changing tablespace for an index [alter index ... rebuild tablespace ... ])? Many thanks in advance.

    alter table tablename move tablespace newtsname;
    You need to rebuild the indexes after the move.

  • How to change password for itunes

    HELP PLEASE!
    DOES ANYBODY KNOW HOW TO CHANGE PASSWORD FOR ITUNES?

    Follow the instructions here.
    Apple ID: Changing your password

  • How to change password for BtOpenZone?

    Hi,
    Does anyone know how to change password for BtOpenZone? I have tried the following link and it is not working with me....
    http://www.btinternet.com/new/content/mybti
    Last time I have to ring BT to change the password, but I want to do via some control panel.
    Thanks
    Kam 
    Solved!
    Go to Solution.

    If you're a BT Total Broadband customer and you want to change the password, you can go to btyahoo.com, log in there and change your password. The primary email account and the FON/OZ logins are linked. if you change your email password, your FON/OZ password will also change.
    if you're an Openzone only customer, you can log into your control panel on the main page and change your password there.

  • How to change password for sidadm user on HP-UX

    Hello
    How to change password for <sidadm> user on HP-UX

    Hello Jan,
           1.      Log on to the operating system with the <sid>adm user.
           2.      Open a shell.
           3.      Enter the command passwd.
           4.      Enter the old and new passwords
    Rohit

  • How to change password for apple user id

    how to change password for apple user id

    If you can't remember your current password then you should be able to get it reset via this page : http://iforgot.apple.com
    If you know your current password then on your phone you can try tapping on your id in Settings > Store and you might be able to change it on your account's screen, or on your computer's iTunes you can log into your account via the Store > View Account menu option and change it on there

  • How to change password for parental controls

    how to change password for parental control on macbook pro

    If you can't remember your current password then you should be able to get it reset via this page : http://iforgot.apple.com
    If you know your current password then on your phone you can try tapping on your id in Settings > Store and you might be able to change it on your account's screen, or on your computer's iTunes you can log into your account via the Store > View Account menu option and change it on there

  • How to change password for  XELSYSADM user in OIM?

    Hello Gurus and Experts!
    How to change password for XELSYSADM user in OIM?
    Your help is appreciated.

    Follow the undermentioned steps to change the password:
    1) Change the password from oim Design Client as usual.
    2) Open xlconfig.xml present in <XL_HOME>\xellerate\config folder.
    3) This step is optional and should only be used if you have a <XLPassword encrypted> tag in the <Scheduler> section. In the scheduler section, change the encrypted="true" to encrypted="false" and replace existing encrypted password with new clear text password, as shown below:
    <Scheduler>
    <XLUserName>xelsysadm</XLUserName>
    <XLPassword encrypted="false">NEW_PASSWORD</XLPassword>
    </Scheduler>
    4) Restart server.
    Now login with the new password.

  • How to write program for handling  script ?

    In script i have 2 pages.
    In first page i have constant windows and variable windows.
    In second page i have main window.
    How to write program for this?

    Hi
    You need to write a driver program. You need to use open form, then write_form to write data into various windows and then close_form to close.
    As you don't want main window in the first page first try out just by having the window in the second page; i guess system will take care of it. As all other windows filled and if u start writing data in the main it'll go for next page.
    If doesn't work have the window on the first page with the least hight and write a command
    IF &SYST-PAGE& EQ 1
        NEXT-PAGE.
    ENDIF.
    Then in the second page you can have the main window hight as per your requirement.
    Here is an example
    (1) Get customer data
      TABLES: scustom, sbook, spfli.
      DATA: bookings like sbook...
      select * from...
    (2) Open form
      CALL FUNCTION 'OPEN_FORM'
        EXPORTING
          DEVICE = 'PRINTER'
          FORM = 'S_EXAMPLE_1'
          DIALOG = 'X'
        EXCEPTIONS
          others = 1
    (3) Print table heading
      CALL FUNCTION 'WRITE_FORM'
        EXPORTING
          ELEMENT = 'HEADING'
          TYPE = 'TOP'
          WINDOW = 'MAIN'
          FUNCTION = 'SET'
    (4) Print customer bookings
      LOOP AT bookings WHERE
        CALL FUNCTION 'WRITE_FORM'
          EXPORTING
            ELEMENT = 'BOOKING'
            TYPE = 'BODY'
            WINDOW = 'MAIN'
      ENDLOOP
    (5) Close form
      CALL FUNCTION 'CLOSE_FORM'
    Regards
    Surya.

  • How 2 find program for smartform

    how 2 find program for smartform

    Hi,
    go to TNAPR table and find the driver program for the layout.
    give the layout name, if you know the output type also give it.
    OR
    go to se71 and go to the layout , check the text elements syntax then it will show the possible driver programs in the window to choose.
    that way you can find..
    Or else...
    Go to the Tcode -> NACE
    OR
    Go to the T-code 'SMARTFORMs'
    Give your form name
    go to the general attributes.
    Check the Package name.
    then go to T-Code-> SE80
    there check the program name for a package wise
    Regards,
    KK
    Message was edited by:
            Kishore Kumar Karnati

  • How to change application for opening an online program?

    I am trying to open an online program for which I have previously downloaded a plug-in required to open and utilize this online application, however, my computer must be set to a default to open the program with ScriptEditor, which is not compatible for running this online program I need to use. Does anyone know how I can change these settings to open the program with my downloaded plug-in versus the ScriptEditor? Any help would be appreciated.

    If it’s actually an online program, it’d run in your web browser instead of being downloaded to your computer.
    If you downloaded a Windows program file, it can’t be run outside of Windows, CrossOver Mac, or Wine.
    (118655)

  • How to change path for Ev4Excel.xla

    Dear All,
    I'm trying to execute predefined BPF - custom menu (ProcessFunctions.xls). Whenever if click e.g. on Back, forward, open a file following similar message is being prompted:
    Macro 'E:\Program Files\BPC\Ev4Excel.xla'!'EvMacroCall "OPENFILE","REPORTS\WIZARD\HotAnalysis\A01 Account Trend.xls","","","","","" can not be executed. Macro may not stated in this workbook or all macros can be deactivated.
    Ev4Excel.xla is resided under path E\PC_MS.
    How can I change path for macro call?
    Or any other idea?
    Regards,
    Ender

    i don't understand why do you have to change the path for Ev4Excel.xla?
    Basically this the addin of BPC into excel. I mean it is the BPC excel client.
    You are choosing the path when you are performing the installation of SAP BPC.
    So Idon't understand why do you want to change the path?
    If you want to do this you have to reinstall the BPC client and you have to choose the path wanted.
    You error is not related to the path it is more related to rights.
    I think you have to provide more details about the steps done and in what condition you observer this error.
    Regards
    Sorin Radulescu

Maybe you are looking for

  • Datagrid rearranging columns?

    I'm having a problem. This code i have written will import the XML but it rearranges the fields when i do this: "for (var subKey:String in data[0])" All of the fields come through but the subKey order is not in the order of the actual XML. Is there a

  • Photos are showing up in Places and not in my albums, organization.

    I have the 3GS. I recently upgraded to the new software with the 4.0. It's really cool so far, except the fact that it took some of my photos out of already organized "albums" and put them into "places". I like the fact that they are recognized in th

  • Emergency questions exporting for dvd studio pro (ntsc and pal)

    Hi, I'm under a tight timeline and would appreciate any help possible. I'm experimenting with outputs/burning today so the real thing can happen tomorrow. I have an hour long project that was shot on two different kinds of cams -- a sony hdv V1U and

  • Repricing of Custom Field used in Key combination for Pricing

    Hi, we have created a custom field and this field is being used in the Key combination for Pricing. For standard fields we all know that the pricing condition is repriced once the value of the key field is changed in the document automatically (not m

  • Error message #2060:  need help and/or suggestions to resolve

    I keep getting an "ActionScript" error message #2060 and do not know how to get it corrected or resolved.  Any and all help here will be greatly appreciated!!!   I am running Windows 7, and use Internet Explorer, Google Chrome and Firefox.  The messa