How to change the Dynamic Selection screen

Dear Freinds,
I have requirement where in on the selection of Dynamic Selections ( iam using PNP logical database) i want to add another fields , could any one tell me how to change Dynamic Selections as per my requirement.
please let me know .
regards
divya

Hi Prat,
I have done similar way and saved the view ( i.e se80> ediobject>table>table name > given all the tables required for me and i try to saved it is not allowing to save and giving message as empty view cannot be saved. Therefore i have selected the tables which have been added and made one by table and selected them . some how it got saved. Now when i added this name of the view in the custom report caterogy and executed my custom report and selected the > dynamic selections i found as empty and in debugging i can see all the 4 tables which i have mentioed while createing view are there . But i dint understood why the custom View is empty.
please correct me where i went wrong.
regards
divya'

Similar Messages

How to add a new Field in the Dynamic Selection screen section.

HI,
There is a requirement in which I need to add a field in existing program of dynamic selections.
I need to add a field KNKK-DBRTG (Customer Rating) in dynamic selections screen of some existing report
which has a dynamic selection screen with other fields like customer account, company code etc. Along with this i need to add Customer rating field also in the selection screen.
I have used GET KNKK statement to select this in the Dynamic selection screen. But I need to make it appear
on the screen.
LDB used is the Customer Database.
I have added GET KNKK statement after GET KNA1 statement.
Can any one help me how we can make this rating field appear in the selection screen.
With the GET statement Credit control area Fields can be selected in the selection screen but I have to permanantly add the field in the selection screen.
Regards
Prashant Prabhu

Hi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico

How to deal with dynamic selection screen elements when macros are used?

Hello experts,
This is regarding the dynamic selection screen elements. Actually the requirement is to modify the existing standard report program RFUMSV00 by copying it into a Z report, adding a few selection screen elements and new fields in the output. I actually did everything required except for the one thing that is going out of my reach.
There are a certain fields which are coming when they are not supposed to get displayed. I don't understand the code because of its obsoleteness. Neither can I debug it because it is just data declaration.
This is the code where there is a fault. If I copy the entire code into a new Z report, I'm getting new fields like Entry Date, Document Type, Reference Transaction, Reference key, Logical system.
DEFINE selection_screen_line.
selection-screen: begin of line.
parameters &3 like &4 default 'X' modif id mc4.
selection-screen: comment (30) &1 for field &3 modif id mc4.
selection-screen: comment pos_low(10) text-019
                    for field &2 modif id mc4. "neu
parameters &2 like rfums_alv-variante modif id mc4.
selection-screen:
      position pos_high.
selection-screen: pushbutton (15) text-028
                    user-command &5 modif id mc4.
selection-screen end of line.
END-OF-DEFINITION.
Kindly, suggest me the right solution.

In the program attributes ( SE38 > RFUMSV00 > GOTO > Properties ), you will find a logical database BRF declared. The include DBBRFSEL is part of the selection screen of this logical database.
The selection screen is actually the selection screen of this logical database.
Under the Logical Database field, there is a Selection screen field where you can input which selection screen of the logical database to be used.
But, this is just to change the selection screen that is displayed. To completely suppress it you need to remove logical database declaration from the properties of the program and call it inside your program through function module.
You cannot just remove it from the declaration because many of its variables are used in the program.
So call it using function module as the first step in INITIALIZATION section of the program.
The syntax and function module to call it in your program can be found in the following thread :
How to hide the selection screen of a Logical datebase?
Regards,
Ashish

How to change the attributes of screen fields dynamically


well i have created a table by name empmaster_data with following fields.
*emp_id.
*emp_fname.
*emp_lname
*dob.
*doj.
*dept.
*desig.
now using a single screen i want to create,change and display the information.even i am using save and exit button.
now i want to change the attributes of screen fields dynamically like active,input,output,invisible.

Hi,
Have Different Radio Buttons for the purposes what you have and use AT Selection Screen Output, Under the event Use loop at screen and with continue with your requirement.
Hope This Info Helps YOU.
Reward Points If It Helps YOU.
Regards,
Raghav

How to replace the existing selection screen with new selection screen

Hi,
I have first selection screen with parametre as a table name, then I have created dynamic selection screen as 2nd selection screen with different fields of that table as select options. This is done using genaration of dynamic report. Now If I click on button on this 2nd selction screen , then I want to replace this 2nd dynamic selection screen , with the other selection screen fields.
Can anybody guide me, How to do replace one slection screen with different selection screen.
and one imp thing is this selction screen is populating with dynamic fields on it.
Regards,
Mrunal

As I can understand you want to make some of the screen field to disable or visible on screen depending upon the interaction of user with screen 1.
You may use this example code in PBO of screen 2.
LOOP AT SCREEN.
    " action has been taken to modify the area office screen as per the option chosen at screen 99.
    CASE ACTION.
        " if the user has taken up the option of UPLOAD
      WHEN 'UP'.     " screen processing while we upload the plan
        " during upload we will make dates as output fields only
        IF SCREEN-NAME = 'ZSDTPLANVRSIO-DAT_TO' OR SCREEN-NAME = 'ZSDTPLANVRSIO-DAT_FRM'.
          SCREEN-INPUT = 0.
          MODIFY SCREEN.
        ENDIF.
        " also make 2 buttons disabled
        IF SCREEN-NAME = 'AO_DO' OR SCREEN-NAME = 'AO_VE'.
          SCREEN-ACTIVE = 0.
          MODIFY SCREEN.
        ENDIF.
      WHEN 'DN'.      " screen processing while we upload the approved plan
        " during upload we will make dates as output fields only
        IF SCREEN-NAME = 'ZSDTPLANVRSIO-DAT_TO' OR SCREEN-NAME = 'ZSDTPLANVRSIO-DAT_FRM'.
          SCREEN-INPUT = 0.
          MODIFY SCREEN.
        ENDIF.
        " also make 2 buttons disabled
        IF SCREEN-NAME = 'AO_UP' OR SCREEN-NAME = 'AO_VE'.
          SCREEN-ACTIVE = 0.
          MODIFY SCREEN.
        ENDIF.
      WHEN 'VW'.      " screen processing while we view the plan
        " during upload we will make dates as output fields only
        IF SCREEN-NAME = 'ZSDTPLANVRSIO-DAT_TO' OR SCREEN-NAME = 'ZSDTPLANVRSIO-DAT_FRM'.
          SCREEN-INPUT = 0.
          MODIFY SCREEN.
        ENDIF.
        " also make 2 buttons disabled
        IF SCREEN-NAME = 'RLGRAP-FILENAME' OR SCREEN-NAME = 'FNAME'.
          SCREEN-ACTIVE = 0.
          MODIFY SCREEN.
        ENDIF.
        " and hide the file input field
        IF SCREEN-NAME = 'AO_DO' OR SCREEN-NAME = 'AO_UP'.
          SCREEN-ACTIVE = 0.
          MODIFY SCREEN.
        ENDIF.
    ENDCASE.
ENDLOOP.

How to change the caret/selection color of text input controls?

Hello JavaFX Community,
i'm new to JavaFX. I'm using it since i saw the huge steps forward with version 2.0.
I have the task to migrate a software from Swing to JavaFX. As a part of our corporate design, we used a special color for the caret and text selection. I couldn't find any information about changing the caret color in JavaFX 2, so i'd like to ask you and i'd be very thankful for an advise.
There is a cross-post at StackOverflow:
http://stackoverflow.com/questions/10057989/how-to-change-the-caret-color-in-javafx-2-0
Thanks and best regards.

This might be possible, but it is not trivial. You cannot do it with a standard API at this time, you will have to look into creating a skin that allows for these properties to be controlled.
For example, the color of the caret is currently controlled in the TextFieldSkin (look for the "caretPath" property). Just forcing a color change in a subclassed skin is not so hard. Something like this:
public class MyTextFieldSkin extends TextFieldSkin {
public MyTextFieldSkin() {
this.caretPath.fillProperty().unbind();
this.caretPath.fillProperty().set(Color.RED);
}However, it gets trickier if this color must be dynamic and if you want other things to be changed as well. It is a place to start though.
Many of the skins methods and properties are 'protected' though, so atleast in Skin subclasses you have a lot of options to introduce new features and behaviour.

How to generate a dynamic selection-screen

Hi folks,
I have a itab with all fields and descriptions of a database-table. Now i want to generate a selection screen dynamically. I want to create a select-option for every field of the table.
First I read all fields of a database table into my intern table:
CALL FUNCTION 'DDIF_FIELDINFO_GET'
EXPORTING
 tabname = 'database_tabname'
TABLES
 dfies_tab = it_tabname_fields.
Then I tried to generate a dynamic selection-screen with a select-options statement per field of the itab, but it doesn't work:
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001 NO INTERVALS.
LOOP AT it_tabname_fields INTO s_tabname_fields. "should be 14 loops and 14 lines
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (25) s_tabname_fields-SCRTEXT_S FOR FIELD var1. "the name of the field should be set dynamically from the itab
SELECT-OPTIONS var1 FOR tabname-s_tabname_fields-fieldname. "s_tabname_fields-fieldname should be set dynamically for each line
SELECTION-SCREEN END OF LINE.
ENDLOOP.
SELECTION-SCREEN END OF BLOCK b2.
I know that this doesn't work but it should help you to understand what i want to do. It doesn't create more than one select-option (it should be 14 because there are 14 lines in the table) and it doesn't get the values from the table.
I hope you can help me...
Regards,
Sebastian

hi
Firstly, have a look at the following code to see how this can be implemented -
REPORT ZTEST.
perform test.
class test definition.
public section.
 methods: create_screen.
endclass.
class test implementation.
method create_screen.
 data: report_line(72),
 report_source like table of report_line.
 data: err_message(240),
 err_line type i,
 err_word(100).
 report_line = 'REPORT TEST.'.
 append report_line to report_source.
 report_line = 'PARAMETERS: P_TEST TYPE I.'.
 append report_line to report_source.
 report_line = 'START-OF-SELECTION.'.
 append report_line to report_source.
 report_line = 'WRITE : P_TEST.'.
 append report_line to report_source.
 syntax-check for report_source message err_message
 line err_line
 word err_word.
 if err_message is initial.
 INSERT REPORT 'ZZZTESTZZZ' FROM REPORT_SOURCE.
 SUBMIT ZZZTESTZZZ VIA SELECTION-SCREEN AND RETURN.
 endif.
endmethod.
endclass.
form test.
data test type ref to test.
CREATE OBJECT TEST.
call method test->create_screen.
endform.
As you can see, the report is being written dynamically. Once the INSERT REPORT statement is executed, the program is available. you can you external subroutine calls to pass the data between the programs now.
Regards,
ravish
plz dont forget to reward points if helpful

How to change the dynamic IP address to Static IP Address in Solaris 10X86

Hi,
I have installed Solaris 10X86 in a VM.While installing Solaris I have enabled DHCP.So its created with dynamic IP Address.Now I want to change the dynamic IP address to static IP address.Please anyone can help me to sort out this problem.

Hi,
I have installed Solaris 10X86 in a VM.While installing Solaris I have enabled DHCP.So its created with dynamic IP Address.Now I want to change the dynamic IP address to static IP address.Please anyone can help me to sort out this problem.

How to change the attribute of screen field to drop down list dynamically

Hi All,
Col X                   Col Y
A                        input field
B                       drop down list
This is a tabular disply where the Screen field attribute for Col y is NO DROP DOWN BOX.
My requirement is to change the attribute of COl Y to DROP DOWN list depending on the value of
COL X dynamically.

Dear Ajay,
Actually this requirement is to enhance the standard screen for Tcode :EHSVU21.
So depending on the 1st Column(Test no) value ,i have to change the 3rd Column(Low.norm.result)
property either to DROP Down or not.
So in the PBO only the changes to be made and there is no field in SCREEN internal table for changing the attribute to DROP down. I checked SCREEN internal table where the field VALUE_HELP and REQUEST is useful but not suitable for my case.
Any solution available?

How to change the stsndard selection text for a LDB..

Hi All,
 I am using a LDB selection screen. I want to change the selection text of the standard selecetion field.
For ex, for LDB- PNP, i want to change the 'Personnel number' text to 'Employee ID'...
Please let me know how to do this.
Regards
Nanda

Hi Nanda,
Here is the code which is exactly suitable for this req.
TABLES: pernr.
data: i_tab type standard table of RSSELTEXTS with header line.
initialization.
i_tab-name = 'PNPPERNR'.
i_tab-kind = 'S'.
i_tab-text = 'Employee ID'.
append i_tab.
CALL FUNCTION 'SELECTION_TEXTS_MODIFY'
EXPORTING
 program = 'ZESO_TEST'
tables
 seltexts = i_tab
EXCEPTIONS
PROGRAM_NOT_FOUND = 1
PROGRAM_CANNOT_BE_GENERATED = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks
Eswar

How to control the dynamic selections in FBL3N?

When I execute the Selection screen of the logical Database SDF, it shows me all the 4 segments - GL Master Record, Compnay Code, Document, Custom (I added this descritption).
SELECTION-SCREEN DYNAMIC SELECTIONS FOR TABLE SKA1.
SELECTION-SCREEN DYNAMIC SELECTIONS FOR TABLE SKB1.
SELECTION-SCREEN DYNAMIC SELECTIONS FOR TABLE BSIS.
SELECTION-SCREEN DYNAMIC SELECTIONS FOR TABLE FAGLFREESEL.
but when I execute FBL3N, I am not able to see the 4th segment fields (FAGLFREESEL).
Pl advise where it is gettig suppressed in the code.
Also is there a way to use the fields from the following in Dynamic Selections?
SELECTION-SCREEN FIELD SELECTION FOR TABLE SKA1.
SELECTION-SCREEN FIELD SELECTION FOR TABLE SKB1.
SELECTION-SCREEN FIELD SELECTION FOR TABLE BSIS.
SELECTION-SCREEN FIELD SELECTION FOR TABLE BSISEXT.
SELECTION-SCREEN FIELD SELECTION FOR TABLE BKPF.
SELECTION-SCREEN FIELD SELECTION FOR TABLE BSEG.
SELECTION-SCREEN FIELD SELECTION FOR TABLE GSEG.
Thanks,
Ven

no solution so far. clsong as it is waiting for a long time

How to set the default selection screen

I modified screen using screen-input = 0.
then how to set the screen-input = 1.
that is how to make that field input enable.
if use the statement screen-input = 1 directly it is giving 2 fields to enter value

In the PBO / AT SELECTION-SCREEN OUPUT
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
 IF screen-name = <your FIELD>. " Fields by name
* IF SCREEN-GROUP1 = <your group of fields>. " Fields with MODIF ID
 IF <test>.
 screen-input = 1. " For input enable
 ELSE.
 screen-input = 0. " For input disable
 ENDIF.
 MODIFY SCREEN.
 ENDIF.
ENDLOOP.
Regards

How to make a dynamic selection screen

Hi
I have been searching the SDN for long time, but couldn't find the answer, so therefor a new post.
I have an internal table with following values:
VBKD-BSARK_E
TVKO-VKORG
By these values I would like to make a new selection-screen whith following:
Parameters: FIELD1 like VBKD-BSARK_E.
Parameters: FIELD2 like TVKO-VKORG.
Next time the internal table can contain
MARA-MATNR
TVKO-VKORG
VBAK-BSTZD
And the parameters should then be:
Parameters: FIELD1 like MARA-MATNR.
Parameters: FIELD2 like TVKO-VKORG.
Parameters: FIELD3 like VBAK-BSTZD.
How do I do that -any suggestions?

Hi,
This piece of code will design selection screen based on radio button selection:
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001 .
    SELECT-OPTIONS : s_date FOR pnpbegps DEFAULT sy-datum .
    SELECTION-SCREEN: END OF BLOCK b1.
    SELECTION-SCREEN : BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
    PARAMETERS:rb1 RADIOBUTTON GROUP rbf DEFAULT 'X'.
    PARAMETERS:rb2 RADIOBUTTON GROUP rbf .
    SELECTION-SCREEN: END OF BLOCK b2.
    SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003 .
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 1(25) text-006 FOR FIELD px_pdf.
    PARAMETERS: px_pdf AS CHECKBOX USER-COMMAND xxx .
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 1(15) text-004 FOR FIELD rb_app.
    PARAMETERS:rb_app RADIOBUTTON GROUP gbf DEFAULT 'X' USER-COMMAND uc01.
    PARAMETERS: p_file(128) MODIF ID 001.           " application server
    SELECTION-SCREEN END OF LINE.
Thanks,
Krishna..

How to change the dynamically LOV value to old value if it errors out

We have an use case like when a value is selected from LOV, some validations(EO validations) occur on that and if the validation fails we are throwing exception.But the new value is appearing in LOV text box. We need to display the old value in the LOV if the validation fails. Can you please let me know if there is any way to do that?

After thinking about this, I wondered if I had mis-read the use-case....so I added #2
Please state your Jdeveloper version, and elaborate on your use-case:
*1. Are you saying that the LOV contains incorrect values that the user has chosen?*
If so you should restrict the LOV values to what is acceptable for the row (based on what other values are in the row)
By restricting the values in the LOV the wrong value can no longer be selected, you would not need to build in functionality to revert back to previous values.
I woud start by creating a view criteria for the view object the LOV is based on. The form values would send the binding variables to the view criteria, and that would then execute the query (invoking the view criteriea). The LOV would then contain some information on only acceptable values.
You may be able to adapt some of the ideas presented in this video (on cascading list boxes) to make your LOV work properly. http://youtu.be/WTevRnXq04o
This video shows some ways to manipulate view criteria: http://youtu.be/dX93fiBCxEg
*2. Are you saying that the user has selected other fields in the form -- validation on those fields fails, and you want to revert back, but the LOV still contains the values selected?*
In that case, you need to clear the values in the form and re-execute the view object -- and refreshing to the correct value.
Stuart
Edited by: Stuart Fleming on Sep 12, 2012 12:04 PM
Edited by: Stuart Fleming on Sep 12, 2012 6:52 PM
Edited by: Stuart Fleming on Sep 12, 2012 6:52 PM

How to generate dynamic selection-screen?

Hi all,
I have two radio buttons on selection-screen.
If user-selects the one, Then under the radio button another parameter should be displayed
if he selects another radio button, the previous parameter should not be displayed and another parameter should appear in the selection screen under the second radio button.
Please help by giving the code to solve this problem?
Thanks,
Vamshi.

Hi Vamsi,
By using AT SELECTION-SCREEN OUTPUT and creating the MOdif id for the selection screen parameter you can achieve the dynamic selection scree..
AT SELECTION-SCREEN OUTPUT.
* Modify selection screen as per the radio buttons selected.
PERFORM modify_sel-screen.
FORM modify_sel-screen .
* If radio button - process in range of STR's selected, display STR
* range and Date range as input
IF p_rb1 EQ c_x.
    LOOP AT SCREEN.
      IF screen-group1 = c_ir2.
        screen-active = c_0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
* If radio button - process from excel is selected, give option for
* user to upload file
ELSEIF p_rb2 EQ c_x.
    LOOP AT SCREEN.
      IF screen-group1 = c_ir1.
        screen-active = c_0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    " MODIFY_SEL-SCREEN
see the below example....
copy the below code you can come to know how the dynamic selection screen happens..
*                   S E L E C T I O N S C R E E N                     *
* Selection criteria
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_rb1 RADIOBUTTON GROUP gr1 USER-COMMAND com1 DEFAULT 'X',
                                         "Process STR's in date range
           p_rb2 RADIOBUTTON GROUP gr1. "Process STR's from Excel
SELECTION-SCREEN BEGIN OF BLOCK c1 WITH FRAME .
PARAMETERS : p_apover TYPE zcpeg_fg_related-pl_version OBLIGATORY.
                                                            "PJ1031008
SELECTION-SCREEN END OF BLOCK c1.
SELECTION-SCREEN END OF BLOCK b1.
* Display date range to process STR's
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
SELECT-OPTIONS: s_banfn FOR w_preq MODIF ID ir1,
                                    "Purchase requisition number
                s_lfdat FOR w_lfdat MODIF ID ir1.
"Date range
SELECTION-SCREEN END OF BLOCK b2.
* Option for uploading file to process STR's
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETERS: p_file TYPE rlgrap-filename MODIF ID ir2. "File name
SELECTION-SCREEN END OF BLOCK b3.
AT SELECTION-SCREEN OUTPUT.
* Modify selection screen as per the radio buttons selected.
PERFORM modify_sel-screen.
FORM modify_sel-screen .
* If radio button - process in range of STR's selected, display STR
* range and Date range as input
IF p_rb1 EQ c_x.
    LOOP AT SCREEN.
      IF screen-group1 = c_ir2.
        screen-active = c_0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
* If radio button - process from excel is selected, give option for
* user to upload file
ELSEIF p_rb2 EQ c_x.
    LOOP AT SCREEN.
      IF screen-group1 = c_ir1.
        screen-active = c_0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    " MODIFY_SEL-SCREEN
Regards,
Prabhudas

How to change the Dynamic Selection screen

Similar Messages

Maybe you are looking for