How to change the PREFIX of a ABAP proxy in SPROXY transaction?

Hi Experts,
I created a ABAP proxy by right clicking (CREATE PROXY) the Service Interface in SPROXY transaction.
At the time, I have given ZMY_XI_ as a prefix in the box of PROXY of tab of properties, fine. Now I need to change the PREFIX, so, clicked the pencil button and changed and trying to SAVE or ACTIVATE, but am getting message saying that "Name must begin with YXI_II"
Pls. let me know that even though SAP has given this field as editable field (on clicking the pencil button), why still am getting this error?
How to get my requirement to be done?
Thank you

Howdy,
You have to delete the proxy (save any code you've done first) and start again with the prefix you want - as all subobjects need to be generated with the same prefix.
Cheers
Alex

Similar Messages

How to change default PIRWBUSER password for ABAP Proxy monitoring ?

Hi,
Please advise how to change setting for PIRWBUSER in PI so no need to use master password PI in ECC server.
In the Message monitoring you can have option to monitoring ABAP Proxy transaction in the other SAP Instance. But of course you need to have PIRWBUSER in that target SAP instance.
How to change this configuration for PIRWBUSER for other SAP Instance. because other SAP instance it migh have different password for PIRWBUSER ?
Regards
Fernand

Hello there.
Please check the note below according to your system:
#999962 - PI 7.10: Change passwords of PI service users
#936093 - XI 7.0: Changing the passwords of XI service users
#721548 - XI 3.0: Changing the passwords of the XI service users
Regards,
Caio Cagnani

How to change the structure of a created Proxy?

Hi, everyone
I have a scenario as follow:
I have to change the importing sturcture of proxy, but the system warning that 'Use transaction SPROXY if you wish to process a generated proxy type'. But, as a matter of fact, I handle it in the transaction SPROXY. What's wrong with it?
Regard.
Best wishes!
Edited by: MikoSuzuHikari Miko on Dec 23, 2008 11:16 AM
Sorry, here, structure means the component type refered

Hi,
Please check the following link will help you out.
http://help.sap.com/saphelp_nw04/helpdata/en/ba/f21a403233dd5fe10000000a155106/content.htm

How to change the format in sap script

Hi,
I am working on a report which calls a sap script and i have to modify the script i.e. the values which are displaying in it. i had never worked on SAP SCRIPTS ,plzz provide me guidlines how to change the format of the data displayed in it.

hi,
this will give you the whole idea about the scripts in SAP the t-code is SE71.
refer this link::
[SAP SCRIPTS|http://help.sap.com/saphelp_40b/helpdata/en/d6/0dc169494511d182b70000e829fbfe/applet.htm]
[WIKI|https://wiki.sdn.sap.com/wiki/display/ABAP/FormPrinting-SAPscript%2CSmartforms]
regards
sarves
Edited by: Sarves Sombhatla on Feb 20, 2009 1:38 PM

How to change the Profit Center in Sales Order

Hi Gurus,
Previously they setted the profit center (YB999) in sales order, now i want to change the profit center and need to give the amount into this profit center 100500.
So, could you guide me how to change the profit center in sales order.
Thank you for your replies.....
Thanks & Regards,
Chandrababu.B
Edited by: Chandrababu Naidu on May 25, 2011 12:44 PM

Hi
If this SO is processed partially - i.e. transactions happened - You cant change it
You can use ABAP and change it in Debug mode, but not advisable... Better to short close the SO and open a new SO for Balance qty
br, Ajay M
Edited by: Ajay Maheshwari on May 25, 2011 5:10 PM

How to change the images dynamically in a table.

Hai,
How to change the images dynamically in a table based on the condition in webdynpro abap.
Edited by: Ravi.Seela on Oct 13, 2011 2:17 PM

This has been much discussed earlier. Do search posts.
For your scenario i would do the following.
inside your node which is binded to the table, i create a new node image with cardinality 1 ..1 and a attribute called path of type string.
create a supply function for the node image .
Supply method now has a Element (Parent element ) and node.
Based on your record in element, set the right image source to path attribute and bind the node.
This will make sure that the framework calls the image supply function for every row in a table.

How to Changing Productive Client in an ABAP+Java System?

How to Changing Productive Client in an ABAP+Java System?

1. Log on to the ABAP system.
2. Call transaction SPRO.
3. Go to SAP Solution Manager Implementation Guide -->
SAP Solution Manager --> Basic Settings --> SAP Solution Manager
System --> General Settings --> Client Copy
4. Perform the following steps:
a) Maintain Profile Parameters
b) Create Client
c) Copy Client 000
d) Convert UME

How to change the status of updated record?

Hi All,
how to change the status of updated record?
new record should be active version(X) and old version will be deleted.
Plz suggest..
Thanks in advance...

Steve,
In the actual question, you mentioned that the old record needs to be deleted and hence the solution provided.
Now, you are talking about field. May I know which field are you talking about??
Jst get in to ABAP Editor and try debugging the code with the solution provided and let us know if that is working fine or not.
Also, I recommend you to take a look at the transaction ABAPDOCU. There you wil find hell lot of examples explaining all the scenarios. You will get a good idea .
Please check that and try to implement it yourself. You will be able to make it after doing mistakes.
If you stuck up again after many attempts, paste your code here. We will help you out
Hope you got my concern.
Thanks,
Babu Kilari

How to change the status of test cases in Test Plan from Design to Ready using Excel VBA

HI,
How to change the status of test cases in Test Plan from Design to Ready using Excel VBA

Thanks Florin,
Your piece of code has worked alot, and it was very helpful in changing the Status of the Workitem to "READY" for all the Users fo the workitem.
Points have been rewarded for your help.
Process: We have acheived this using the "Work Item Exits", Usng "AFTER_EXECUTION" Method.
Note: The Exit will be executed if "exit_cancelled" statement is present/used in the work item method. if not it is not taking to the exit code. I'm unable to find the reason for it. Florin can u please explain this point.
Please check the link for adding the code in Work Item Exits.
http://wiki.sdn.sap.com/wiki/display/ABAP/ProgramExitsIn+Workflow
Please find the Code:
method IF_SWF_IFS_WORKITEM_EXIT~EVENT_RAISED.
Get the context of the workitem
me->wi_context = im_workitem_context.
After execution of the workitem call the method AFTER_EXECUTION
if im_event_name eq swrco_event_after_execution.
    me->after_execution( ).
endif.
endmethod.
METHOD AFTER_EXECUTION.
This method acts as the Event Handler for SWRCO_EVENT_AFTER_EXECUTION
DATA: LCL_L_WID TYPE SWW_WIID,
        L_STATUS TYPE SWR_WISTAT-STATUS,
        L_NEW_STATUS TYPE SWR_WISTAT,
        L_SWR_MESSAG TYPE STANDARD TABLE OF SWR_MESSAG,
        L_SWR_MSTRUC TYPE STANDARD TABLE OF SWR_MSTRUC.
Get work item
CALL METHOD WI_CONTEXT->GET_WORKITEM_ID
    RECEIVING
      RE_WORKITEM = LCL_L_WID.
L_STATUS = 'READY'.
CALL FUNCTION 'SAP_WAPI_SET_WORKITEM_STATUS'
    EXPORTING
      WORKITEM_ID    = LCL_L_WID
      STATUS         = L_STATUS
      USER           = SY-UNAME
      LANGUAGE       = SY-LANGU
      DO_COMMIT      = 'X'
    IMPORTING
      NEW_STATUS     = L_NEW_STATUS
     RETURN_CODE    = SY-SUBRC
    TABLES
      MESSAGE_LINES = L_SWR_MESSAG
      MESSAGE_STRUCT = L_SWR_MSTRUC.
IF SY-SUBRC EQ 0.
ENDIF.
ENDMETHOD.
Thank You Once Again,
Ajay Kumar Chippa

How to change the path of MPLS

How to change the path of MPLS core from one PE to the other PE with redundancy link? The IGP is OSPF and running MBGP among PE routers.

Hi there,
Load-balancing is applicable in MPLS as follows:
If multiple equal-cost paths exist for an IPv4 prefix, the Cisco IOS can load-balance labeled packets. If labeled packets are load-balanced, they can have the same outgoing labels, but they can also be different. The outgoing labels are the same if the two links are between a pair of routers and both links belong to the platform label space. If multiple next-hop LSRs exist, the outgoing label for each path is usually different, because the next-hop LSRs assign labels independently.
If a prefix is reachable via a mix of labeled and unlabeled (IP) paths, Cisco IOS does not consider the unlabeled paths for load-balancing labeled packets. (The load balancing is done only between labeled paths. This means that if an IP (unlabeled) and a labeled path have the same cost, only the labeled path is used to forward the packets.)
HTH,
Mohammed Mahmoud.

How to change the paper format in SOST tcode from X_65_80 to X_65_266?

I got data from OTF in SAPSCRIPT and send by email.
How to change the paper format in SOST tcode from X_65_80 to X_65_255?
I need to change it automatically from abap.
Any suggestion?

Hi,
       change line size and line count in report.
        By default report line size and line count is taken in printer
       settings
REgards
amole

How to change the cash journal voucher

Hi
Pls advice how to change the cash journal voucher lay out , that is auto generated in the system.
I need to add some fields.
Thanx

Hi,
U need to develop your own layout with the help of your ABAPer with the required fields.
Then Go to the following path
Display IMG --> Financial Accounting --> Bank Accounting --> Business Transactions --> Cash Journal --> Setup Print Parameters for Cash Journal.
Hope you are clear.
Cheers
P O I N T S

How to change the OraSSO login link in webcache/load balance

Hi
we have 10gAsR1 installed as a Portal instance. We have 6-server
load balancer => webcache as loadbalancer (listening port 80)
Wb ch1 and wb ch2 => webcache (listening port 7777)
portal1 and portal2 => Portal listening 7778
infra =>Infrastruture with repository Portal/Oracle SSO (listening 7777)
This set up is working fine for our intranet setup, now we need to open this for couple of external clients. Well initially we need to open on the load balancer server on port 80 for external team to access, it works fine when we make it publc access.
Now when we need to make it SSO (siteminder) enables, when users click on login link it first goes oracle sso then it internally redirects the page to site minder sso.
Well, I have noted that the sso server details are mentioned in global setting sso/oid details. Since we need to open this for external client we have to add a DNS entry for this so that we can allow its access over firewall..
Now I have made DNS name change at my infrserver level, now I need to update the change at the load balancer server (where wheb chache is running).
Any one know how to chang the URL at load balancer.
I am struck at this point please suggest how should i proceed..
Thanks,

Extract from Personalization Guide - Page Footer - Personalization Considerations
* If you wish to personalize the URL that points to the Privacy Statement for a page that displays a standard Copyright and Privacy (that is, its Auto Footer property is set to true), set the Scope to OA Footer, in the Choose Personalization Context page of the Personalization UI.
* If you wish to personalize the URL that points to the Privacy Statement for a page that displays a custom Copyright and Privacy (that is, its Auto Footer property is set to false), set the Scope to Page in the Choose Personalization Context page of the Personalization UI. In the following Page Hierarchy Personalization page , identify and personalize the Privacy page element.

How to change the privacy statement link url

I looked into the previous threads , could not find the answer to "Changing the privacy statement url to clients privacy statement url".
I am talking about the privacy statement URL in the page that user see it as soon as user logs into the e-business suite.
I have read the previous theads and developers guide regading how to show or hide this autofooter thing. but could not find any thing about how to change the one in the login page.I even looked ino personalization but could not find a place to change this url. please HELP.
Another question is " is it ok to show privacy statement in just the first page and hide it in rest of the application pages?"
Thanks
karan

Extract from Personalization Guide - Page Footer - Personalization Considerations
* If you wish to personalize the URL that points to the Privacy Statement for a page that displays a standard Copyright and Privacy (that is, its Auto Footer property is set to true), set the Scope to OA Footer, in the Choose Personalization Context page of the Personalization UI.
* If you wish to personalize the URL that points to the Privacy Statement for a page that displays a custom Copyright and Privacy (that is, its Auto Footer property is set to false), set the Scope to Page in the Choose Personalization Context page of the Personalization UI. In the following Page Hierarchy Personalization page , identify and personalize the Privacy page element.

How to change the default apex port

hi,
i am installed apex4.0 in EBS R12 DB with HTTP Server method. my apex is running from application server 10g and default port is 7777.
URl: http://hostname:7777/pls/apex
My EBS R12 running on http://hostname:8007.
is it possible to change the apex port to EBS Apache port(8007) in R12 and finally i want to change above URL like this
Before change : http://hostname:7777/pls/apex
After Change : http://hostname:8007/pls/apex
Thanks in advanace....

How to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can do

How to change the PREFIX of a ABAP proxy in SPROXY transaction?

Similar Messages

Maybe you are looking for