How to change the size of a box in the runtime

I created a box in my scene, and want to change it's size in the runtime.
Is there any method to do so?
ps: I used "Box(float xdim, float ydim, float zdim, int primflags, Appearance ap)" to create the box .
thank you guys!

Dropping and re-creating the table is by far the best way (of course you need to unload the table's data to a flat file with ttBulkCp first and then reload it again afterwards).
a second option is to drop the column and re-add it with the new size but you still need to preserve the data first and put it back afterwards and this is harder for a single column than for a whole table. Also, if you are using replication you should exercise care when using ALTER TABLE to ensure iall replicated copies of the table maintain the same physical structure.
Chris

Similar Messages

How to change the font size of Text Box Properties Appearance tab into 2 decimal digit.

How to change the font size of Text Box Properties Appearance tab into 2 decimal digit. I am uanble to modify it to 5.38 pt for example. Its only allowing to 1 decimal place.

Click on each field and the choose Properties from either File menu (or if on Mac hold dow mouse button until context menu appears choose properties)
go to Font
choose desired size and type font,you can choose to make this the default.
Do this with each field.
Or if you have a lot of fields:
while one is selected select all of them
then go to fonts in properties
change Font and size and make default.

How to change the font size of Text box tool ?

How to change the font size of Text box tool ?
I am using Acrobat PDF 6.0
Tools > Advanced Commenting > Text Box Tool
I need to know how to change the font size. The default font size is too big.
let me know
Thanks

I do not have AA6 available right now (I can check at home this evening). I am also using AA Pro, not Std. In AA7, there is a text box tool that is a commenting tool. When I started typing, a properties toolbar came up that had the font size and such. I haven't figured out how to get the toolbar after the fact. In AA8, I selected the text box tool and then went to view and selected the properties bar (the font size and all showed then), or use Ctrl-E when editing the text. I have not been able to figure out how to edit the text in a text box after you have created it - think it is a mental block right now. Bill

How to change font size of text inside a "text box" form the Drawing Markups?

Hi,
I expected there to be an option to change the font size after I selected the text and right-clicked, but no, there is only one option that allows you to change the text style but not the font size.
Does anyone know how to change the font size?

Don't know what the e-mail is about, why not just log into the forums. In any case, it does not sound like a text box, but one of the other text options (like the Typewriter tool). The regular text edit tool allows you to edit the text and fonts in a regular text box. Select the box and use ctrl-E. You may have to select the text edit tool (name changed in AAX) first. Such editing is not really recommended. Editting in Acrobat should be limited to simple changes, and those often become a pain. The best method of fixing the problem is in the original document and then creating a new PDF.

How to change font size in a call-out tool box?

Hi, the other day i inserted a call-out tool box in a PDF document, however i cannot find anything that can change the font size of the letters i input in that box. could anyone help? Thanks.
Sherman

This is a question for the Acrobat support forums – please post there.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Wed, 23 Nov 2011 10:55:07 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: how to change font size in a call-out tool box?
Re: how to change font size in a call-out tool box?
created by danmarch<http://forums.adobe.com/people/danmarch> in PDF Language and Specifications - View the full discussion<http://forums.adobe.com/message/4043425#4043425

How to change the size of cursor

How to change the size of cursor in flash,when we use dynamic text box or input text box the cursor is covering the whole height of the text box.is there any way to reduce the size of cursor

In input text box while entering some value, the blinking of cursor is covering the whole text box,
When i use the code
Selection.setFocus(instance name of text)
The cursor blinking is covering the whole text box height

How to change the default window size display font size on Lync 2013 main window?

Hi champs,
Just a simple non-technical question: How to change the default window size display font size on Lync 2013 main window on Windows 7 desktop?
Thanks,

Hi,
Did you mean change the Lync: Change the Default Font and Color of Instant Messages just as Edwin said above?
If not, as I know, there is no natural way to change it.
If yes, on the latest version of Lync 2013 client, there is a new option “IM” on Lync client “Options” list. And you need to change the default Font and Color of IM in the interface of “IM”.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

How to change the default hint box color?

How to change the default hint box color on the default Metal LookAF?
I'm trying looking for something with javax.swing.UIManager, but i just find ways to translate the UI.
Any idea?

[UIManager Defaults|http://www.camick.com/java/blog.html?name=uimanager-defaults] shows all the properties of the UIManager.
Although there is no "hint box" component, so I don't know if it will help.

I cannot figure out how to change the photo size on my iPhone 5s. I was given the choice of small, medium or large the first time I took a picture. Now I have no idea how to change it to medium. Can anyone help?

I cannot figure out how to change the photo size on my iPhone 5s. The first time I took a pic it asked if I wanted smalll, medium or large and listed the pixels. I chose small but am now finding that is too small. Can anyone help me set it to medium now? I can't find any setting for that. I'm a newby to iPhones and have no idea what I'm doing. Thanks for any help you can offer.

By "sending" do you mean sending email?
If so, what app are you using to take the photos on your iPhone 5? Or are the photos from a different source (saved to your Camera Roll from somewhere else, like a web page or Messages)?
My guess is that Mail gives you the option to send different file sizes when it detects you are trying to Mail a really large photo file. The size of photos on the iPhone 5 is really big and some email providers may stop your mail from being delivered if attachments are too large. Thus, Mail tries to help you by offering to resize the photo.
I suspect that if you are sending smaller files, Mail does not bother giving you options to save a smaller version. In fact, I have seen this behavior. So, if the photo is already "small enough", it gets sent as-is.
To my knowledge, there is no global iOS setting for this. Some apps may have different rules, of course.

How to change font size, maximum column size in the result screen ?

hi All
That's great when using SQL Dev.
But I also have a trouble that how to change font size, maximum column size in the result screen ?
My users think that font in result screen is shown very small, and whenever the data in each colum is long then it's not shown full data in column, they must double click for extend the size. Have the option to default the max size for showing full data in each column ? I try but still not to do that .
Appreciate for anyone to help us.
Thanks all.
Sigmasvn

You can't change the font for the results screen yet, however you will be able to select an auto-fit option for selected columns, so if some columns have slitghtly wider text you'll be able to set the column widths to handle these wider columns.
Also, there s the option of switching the layout of a record in the grid.
Sue

How to change the font size and style on run time

dear all
i try to change the font style and font size on runtime. I did the following:
1- i created an item(:font_size) in which i will write the size of the font for the the other item ('customer_name')
2 on the post_change trigger for 'font_size' i write this code
SET_ITEM_PROPERTY('customer_name',FONT_size,(:font_size);
i write 12 then then font size changed , then i write 18 , the size does not change. and when i write any value , no change happens. I do not know why
the second problem is how to change the font style
i made three checkbooks (bold,italic,underline)
on the trugger when_checkbox_checked i write
     IF :BOLD = 'B' THEN
     SET_ITEM_PROPERTY('N_SAMPLE',FONT_STYLE,'BOLD');
     ELSE
SET_ITEM_PROPERTY('N_SAMPLE',FONT_STYLE,'REGULAR');
     END IF;
no change happend at all.
please help

Hi friend,
it's a really really strange tip... May be it's a Forms bug? I've tried with set_item_property..and.. you're right, it doesn't work..
So.. you can try making this:
- create a visual attribute with an specific font size....
- use the
SET_ITEM_INSTANCE_PROPERTY('block.item',CURRENT_RECORD,VISUAL_ATTRIBUTE,'you_visual_attribute');
and call it from psot-change....
It works
Hope it helps,
Jose.

For the life of me, I can't find out what size a photo is in terms of inches or how to change the size of the photo[s] so I can print them. I think I read somewhere to click edit, then click adjust. Nothing there about sizing.

For the life of me, I can't find out what size a photo is in terms of inches or how to change the size of the photo[s] so I can print them. I think I read somewhere to click edit, then click adjust. I don't see anything about re-sizing when I click the adjust tab: only saturation and tint levels. Thank you.

With respect to digital images, there really is no size in inches. The size is given as number of pixels horizontally and vertically. In iPhoto '09 you click the little "i" inthe lower right side of the window and it will display information related to the selected photo, including the pixel dimensions. I do not have iPhoto '11 installed so I don't know if it is the same there.
In some applications, such as preview, it has something additional called Dots per Inch (DPI) which you would think would allow you to convert the pixel dimensions to inches. It is not a real thing, though. The DPI is determined by how large or small you have chosen to print your photo and the capabilities of your printer.
There is also something called Aspect Ratio, which is usually expressed in inches x inches such as 6x9 but that doesn't mean the size on the screen or when printed is 6x9. It is the ratio of the pixel dimensions. When cropping your photos, you will have several standard aspect ratios to choose from plus any custom ones you create.
In iPhoto '09, after you choose Print, in the Print Setting window are the settings for the size you want the photo printed. You want to shoose a setting with the same aspect ratio of your photo. Otherwise, iPhoto will resize and/or crop your photo to fit the size you have chosen.

How to change the Size of the font of the JDeveloper IDE

First of all, this question does not concern the code editor.
How to change the font for the editor is clear, well documented in the documentation as well as in many of this forums threads.
My question is how the font of all the IDE components can be increased.
Is some threads I found to change the font size in the ide.properties file.
I tried that solution but it does not bring any solution.
I'm a person with low vision, using a MB Pro with OS X lion just for overall better visibility.
Talking to a lot of people, who have good vision capabilities, it seems that even a lot of people suffer from the fonts which are to small.
So ... is it possible to document clearly where to do what and in what versions of JDeveloper.
I've not yet discovered if any kind of skin settings can be applied ... but this would be great, surely if some kind of predefined bigger fonts would be available.
Currently I'm using version 11.1.2 and 11.1.1.5.
Help would be dearly appreciated.
Greetings,
Jan.

Did you close JDeveloper and re-open again after making the changes in ide.properties?
If changing the ide.properties does not work.
Try this:
Go to 'Tools' Menu and select 'Preferences' Sub menu:
Select ''Code Editor" and select "Fonts"
Set the options for font-size as in screenshot:
http://adfsampleapplications.googlecode.com/svn/trunk/images/FontChange.png
Thanks,
Navaneeth

How to change the size of control´s prompt?

No matter the size of data to be displayed in the view suface prompt, the controls have the same size.
Does anyone here know how to change the size of control in surface prompt?

HI,
In order to change the size of a radio button... one way you may consider is to Customise the Radio Button.
Place a Radio Button (RB) on the FP of a VI, Right-Click the RB > Advanced > Customise...
Click the Mode Button (most Left button) for Edit Mode
Right-click the radio button (the round image) now, you will see a list of actions i.e. Copy to clipboard, import picture ...You will see Four images under the 'Picture Item', those are the images that you will need to replace.
Prepare Four Images of the similar but larger expected size
*** Copy the 1st new image to clipboard. Back to the Picture Item and select 1st image. Then, select Import Picture (to replace the existing image)
Repeat *** for all four images.
Once done, change the mode back to original. Save the *.ctl
You are now ready to use the customised radio button!
Quick sample attached (sorry for the poor images created )
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.com
Attachments:
IFK_RButton_Large.ctl ‏11 KB

How to change the size of the titel of a picture in a diashow

please answer the question.
how to change the size and the possition of the titel of a picture in a diashow

You need to select it. Copy that selection to a new layer, and use Free Transform to resize it.
http://www.youtube.com/watch?v=qWpAGmwhllQ
http://www.youtube.com/watch?v=Bi4jJnYLkUA

How to Change the Size of the Parameter Form in Report6i

hi
Does any one know how to change the size of the "PARAMETER FORM" in Report6i.

Hi,
You can change it in the "Parameter Form Window" property of the Report Object.
In the object navigator, select the Report object and open its property palette. Under "Parameter Form Window" you can change the "width" and "height" properties.
Regards,
Siva B

How to change the size of a box in the runtime

Similar Messages

Maybe you are looking for