How to change UDF value in created A/R Invoice or A/P Good Receipt PO?
I have created my UDFs in Marketing Document Rows.
After I've added some documents such as A/R Invoice or Good Receipt PO , I want to change my UDFs value for sometime. But B1 don't let me do that. I know and understand the reason why we can't change this rows data. But I want to change my UDFs only , so it don't effect any other things.
How can I do this? or Can SDK help me?
thx
You can change with such statement :
ObjInv.Lines.UserFields.Fields.Item("U_FieldName").Value = "123"
Edited by: Riny Liu on Mar 17, 2008 5:39 PM
Similar Messages
-
How to change UDF value in system form if its invisible or inactive?
Hi all,
I need to compute some document total values and save them on UDFs defined on Sales Order Header document, when the user adds a new order line.
However I must not allow the user to change them (or see them). Also, there are other UDFs on the Sales Order Header that the user must be allowed to change...
Is there any way to control this? If I set a UDF as not 'Active', I cannot change its value with programming.
I'm using the following command to change a UDF value on the Sales Order form:
Form form = B1Connections.theAppl.Forms.GetForm("-139", pVal.FormTypeCount);
EditText et = (EditText)form2.Items.Item("U_TotalTax1").Specific;
et.Value = "10"; // this raises an exception "Form item is not editable"
Is there any other way to change this UDF contents (maybe with datasources? etc)
Thanks all,
Manuel DiasHi You can Enable/Disable the item after your transaction. follows the code
oForm.Items.Item("U_TotalTax1").Enabled = True
oEdit.value=10
oForm.Items.Item("U_TotalTax1").Enabled = False
Try this
Manmath -
How to changing char. values and create new lines in C_TH_DATA
Hi experts,
we need to distribute the cost of some sender costcenters to the corresponding receiver costcenters.
We have already created a DSO and maintained this with the sender and receiver costcenter. We use this lookup table later in the execute method of our created planning function type to take the sender costcenter and distribute this to the corresponding receiver costcenters.
I've already implemented an IP planning function based on planning function type for this process.
At the end when I debug the method I see that this works fine. I give you an example:
I have in my lookup table the following record:
sender costcenter receiver costcenter distribution percent
4711 4712 75
4711 4713 25
Based on those records in the lookup table I've to distribute the cost of sender costcenter to the receiver costcenters.
Just imagine I would get this record from c_th_data:
sender costcenter costelement value
4711 3000111 100
I have to have the following result after running the exit planning function:
costcenter costelement value
4711 3000111 100 -> without changing
4711 8000111 -100
4712 8000111 75
4713 8000111 25
When I debug the exit function I see in the execute method that c_th_data will be filled correctly. I see exactly the records that I want to see.
But once the function is finished I don't see this result. I also checked the conversation
Changing Char Value in IP C_TH_DATA
but I can't understand what happens after my coding yet.
Can anyone help me or give me an advice what could be the problem here?
Thank you all in advance for your support.
Kind regards,
AliHi Ali,
The planning function generates the records in delta mode. I am explaining the concept taking your example only:
Records in cube before running PF:
sender costcenter receiver costcenter distribution percent
4711 4712 75
4711 4713 25
sender costcenter costelement value
4711 3000111 100
4712 3000111 100
4713 3000111 100
The records that you need to generate from code(Previous ones need to be changed):
sender costcenter costelement value
4711 3000111 000
4712 3000111 175
4713 3000111 125
**Please note that you dont need to generate any corrections(delta records), you only need to generate the final values in the records and the PF will generate the delta's on its own. Also in this case you should see 3 Records Read, 0 Deleted, 3 Changed.
Please let me know if you need any more clarification,
Thanks,
Puneet -
How to change margin value in mode booklet printing Adobe Reader X ?
How to change margin value in mode booklet printing Adobe Reader X ?
Is this a form you created in Acrobat or is it a form that you're using with Reader? If the latter, there's nothing you can do if the field has been set up to format the field with a £ for the currency symbol.
-
How to change default value in a table using ALTER TABLE
Hi,
How to change default value in a table
I have a table TEST which has 2 fields CODE of Datatype VARCHAR2(10) and Indicator as VARCHAR2(1).
I want to change the default value using ALTER TABLE TEST of field Indicator to 'I'.
Any help will be needful for me
Thanks and Regardsuser598986 wrote:
Hi,
How to change default value in a table
I have a table TEST which has 2 fields CODE of Datatype VARCHAR2(10) and Indicator as VARCHAR2(1).
I want to change the default value using ALTER TABLE TEST of field Indicator to 'I'.
ALTER TABLE test
MODIFY (indicator DEFAULT 'I');
Incidentally, INDICATOR is a keyword in Oracle, so you may have problems using it as a column name. If so, you'll have to enclose the column name in double-quotes, and be careful to use capital letters inside the quotes.
Edited by: Frank Kulash on Aug 26, 2009 11:42 AM -
How to change characterics values in a ready input query ?
How to change characterics values in a ready input query base on a real time infocube?
when I use IP to planning I want to change characterices values that have exit in query?Hi,
On the properties tab of the characteristics (within input query) you can decide what values need to be populated when the query opens.
Is your exit written on char relationship?
regards,
Lokesh Nandula -
How to change SelectionColor in TLFTextFielfd created with var txtTest:TLFTextFielfd = new TLFTextFielfd(); syntax ?
You have posted in the AS1/2 forum. If you are using a TLFTextField, it can only be used with AS3. You might need to repost in the AS3 forum if you truly intend to use the TLFTextField. As far as I can see there is no SelectionColor (or selectionColor) property for the TLFTextField.
Also, in every instance of the word you have mis-spelled it...
"TLFTextFielfd" should be "TLFTextField" -
How to change parameters values
dear gurus,
can someone guide how to change below values and apply and what steps should taken and changes do in files
* Shared_pool_size = 450M
* Db_cache_size = 750M
* Pga_aggregate_target = 125M
* Sort_area_size = 1M
* Open_cursors = 4000
* Processes = 300
regardsHi If you have set SGA_TARGET and PGA_TARGET , then you dont have to wory for the individual components.Oracle internally handle it .
You can get the information for each components using below sql
sql> select * from V$SGA_DYNAMIC_COMPONENTS;
If you want to find the optimize size of few of above components , take AWR report(by running script @?/rdbms/admin/awrrpt.sql). At below of report you will see SGA Memory Summary,Shared Pool Advisory,SGA Target Advisory,Java Pool Advisory,PGA Memory Advisory . So accordingly you can reset above mention parameters. This will put lower limit for these parameters
Edited by: amitbansode on Sep 9, 2009 5:07 AM
Edited by: amitbansode on Sep 9, 2009 5:08 AM -
How to change variable values ?
Dear friends,
How to change variable values when we are broadcasting the Queires ?
Do we need to change them everytime ?
Thanks,
NHi,
Please go through it.
/people/ramkumar.ghattamaneni/blog/2008/02/25/using-variables-while-broadcasting-queries-to-the-portal-in-bi-7
Regards,
Ramkumar. -
How to change default value of requested delivery date in va21 create quo
hi experts,
My requirement is simple, to add one day to the default value of the Req deliv date under "General header data" in VA21.
I modified MV45AFZZ (an include in SAPMV45A).
I added this code:
if sy-tcode eq 'VA21'.
case screen-name.
when 'RV45A-KETDAT'.
write reqdate to RV45A-KETDAT.
screen-input = 0. "don't let user change it back.
screen-active = 1. " but let user see the field and the
endcase.
endif.
reqdate is the new value for RV45A-KETDAT which is sy-datum + 1.
This code does'nt actaully change anything. I tried to change other values of other fields using the same code and it works. Is RV45A-KETDAT the correct field to use?
Thank you in advance.You don't need to do that via user exit. You can configure the RDD defautls by document type in SD config, and adding 1 day to the current date is very simple. You can continue to use the FIELD_MODIFICATION user exit to lock down the field.
Also, as a general practice in the sales exits, don't use SY-TCODE, use T180-TCODE or T180-TRTYP, even if you're not using BAPIs to create documents. -
How to change default values in SCC?
Hi,
does anyone knows how to change the default values of the Sybase Control Center e.g.:
Activation Code Expiration (Hours) – indicates how long an activation code is valid. The default is 72 hours.
Within SCC the field is deactivated, it's changeable after creating a connection, but I need to set it within the connection template.
Thanks in advance, ChristianYou're right, but we want to change the default setting of the template, to avoid this step.
Thanks, Christian -
How to change the values in custom profiles based on security group ??
Hi,
i am facing problem for my requirement, can anybody help me for below scenario...
i have custom check in profiles , there are content types and sub types. sub type nothing but a categories on for particular content type. For example i have News content type , same in the below subtypes drop down list are press release, events, articles etc.
what i want to do is, when i open custom checkin profile, subtype values need to be changed( some values in subtype should hide) based on security group changes .
In the Sub type listed values, some values need to hide only when i choose different security groups.. sub types values should display based on the particular security group only. when ever i change the security group, drop down Values in subtypes needs to change.
hope understand my requirement.
How to achieve this task. Any help would be greatly appreciated.
Thanks,
ytHi,
Thanks alot. its working fine
Can we configure DCL Relation two times in one information filed ??? i should not create not more than fields to this requirement.
Type -> subtype = DCL already existed
Now, i want to Create DCL to
Subtype ---> Security group
As per my requirement, if i change the security group in checkin form, values should be change in the SubType drop down list.
Created checkin profile there was DCL relation to " Type and "Sub Type" . now i want to map Relation ( DCL ) for subtype to security group.
i was trying do for DCL for subtype and security group. but there was already existing DCL created for subtype information field (Relation configuration done for content type). even though i was trying to do for DCL in Security group information field. but, i could not find security group information field in configuration manager.
Now what should i do ?? how to create DCL to subtype and security group ??
Help would be appreciated.
yt -
How to change field values AFTER Inbound IDOC Posted successfully
Hi SAP Experts,
In my project I receive the inbound IDOC PORDCR05 from PI and posted as an Purchase Order in ECC.
I create the Z process code and Z function module (which is a copy version of IDOC_INPUT_PORDCR) and complete all the necessary configuration steps. It works perfectly.
My problem is: I have to collect some inbound idocs (that satisfied some criteria) and change the value of field EKPO-TXJCD and EKKN-KOSTL of the PO AFTER it posted successfully (means the purchase order is created and save in database).
How can I do this? I've try to put the logic code in Z function module, but it does not work, since at that time, the Inbound IDOC is not updated to the database yet.
Aprreciate your advise.
Regards,
Elaine.Hi Elaine ,
as per your cretiria pick the idocs and take created PO# from status 53 & use the BAPI (BAPI_PO_CHANGE) to change the neccessary values in the PO. We can't reprocess those idocs again.
Reddy -
How to Change the Value Field Type of a Value Field
Hi,
How can I change the value field type from Currency to Quantity of a value field? I have tried to do it in KEA6. I can change the value field and its description, but not the value field type from currency to qty. If I change this config, is there any other changes that I need to make so there is no side issue of this change?Hi Prem,
Once you created value field as quantity or currency, you can not change this nature of value field. Based on this, system creates lots of data and tables. For this reason system will not allow any changes in quantity or currency.
Alternative way is to remove the old value field and create a new value field assign to operating concern and put all your seetings.
Please let me know if you require any clarifications.
Thank you,
Regards,
Santosh
Reward points if helpful. -
How to change varient values dynamically in APD
Hi Friends,
I have created an APD ,to this APD i am feeding 4 query out puts.For this 4 querys i am using the varients, i wante to change the varient values i.e date field/date ranges fields dynamically.pl.let me know if any b'dy worked such scnarios.
Thanks in advance.
Sirisha.sk_java wrote:
Hi,
I need to know how we can change the values of annotation dynamically.Annotations in source code must be compile-time constants. The annotation objects returned by the runtime are immutable.
That said, there are a few ways to get the effect of changing annotation values. First, you can use the redefine classes API and then getting a new annotation object will have the updated values. Also, an annotation type is just a specialized kind of interface and that interface can be implemented by your own classes too.
Maybe you are looking for
-
Ok, so show us how to get Disk Utility to repair permissions on a Time Capsule's internal HD.
-
Unable to activate after Service Pack 2 for Microsoft Office 2010 (KB2687455) is deployed
I'm having a very strange issue with deploying the "Service Pack 2 for Microsoft Office 2010 (KB2687455)". Here's what I see: Deploying to a Windows 7 SP1 system fully patched as of 7/29/2013 Using SCCM 2007 R3 Task Sequence installs Office Professio
-
Mircosoft Word 2004 opening when mac started up
Hi, When I start up my mac, MS Word 2004 seems to want to start up. Do you know why this might be and how I might turn this off? Message was edited by: leedern
-
It seems that someone has stolen my iPod touch at my school. I didnt put a tracking device on it before it was stolen. So I was curious as to whether it's forever lost or somehow I am still able to find out where it's at?
-
Bug in XSU: @ttributes don't work more than once
This was a nettlesome one to diagnose and workaround. The fix is easy, but Oracle doesn't ship their source code, so someone there will have to do it for us. Recent releases of the XSU have a feature where you can output XML attributes, rather than t