How to check if a value is in a table column?

Hi, I am new to Oracle. Will sombe body pls tell me how to solve the problem:
Suppose there is a table with a employee-id column, there are lots of lines in the table with employee-id be 1,2,3,4.....respectively. my question is, how to check if a employee-id e.g., 15 is in the table?
thanks in advance

>
> Suppose there is a table with a employee-id column,
there are lots of lines in the table with
You mean records.
employee-id be 1,2,3,4.....respectively. my question
is, how to check if a employee-id e.g., 15 is in the
table?
SELECT *
FROM EMPLOYEE
WHERE EMPLOYEE_ID = 15;Regards.
Satyaki De.

Similar Messages

How to check a field value within an Internal table

Hi Friends,
My requirement is:
I have a line item of PO records, in that each line item of Plant field should not diffe with other line items. If it differs or say the records have different plant values line items, then I have to throw an error message.
Below example for better understanding.
lineitem Plant
010       ABC
020       ABC
030       XYZ
040       LKG
So, my report will throw an error like "All line items must be identical'.
How to do proceed it.Please advise.
Thanks & Regards
Sankar.

Hi Sankar
first you need to fetch all the values in one internal table from your PO.
After that create an internal table with only plant field and move all the plan values in this table.
let assume ITAB is a table with all the values. and ITAB1 with plant only.
wa_itab is the work area for ITAB and wa_itab1 is WA for ITAB1.
ITAB has all the values and ITAB1 has all the values only for plant.
delete adjacent duplicate from itab1 compairing plant.
loop at itab1 into wa_itab1. " this will fetch all the plant values in workarea.
read table itab into wa_itab where wa_itab-plant = wa_itab1-plant. " this will fetch only the values matching to the table itab1
if su-subrc <> 0.
message 'plants are not similar' TYPE 'E'.
elseif sy-subrc = 0.
write your code*.
endif.
endloop.
hope this will help you.
Thanks
Lalit Gupta

How to check if all values from a dataset has come to an internal table

How to check if all values from a dataset has come to an internal table ?

Hi,
After OPEN DATASET statement check if sy-subrc = 0 if its success then proceed with split statement and save the dataset values into a internal table and while debugging the internal table you will find that whether all values get into internal table.
Checking sy-subrc after OPEN DATASET statement is must to fill up the values in the internal table.
For e.g.
OPEN DATASET p_inpfile FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
    WRITE :/ 'No such input file' .
    EXIT.
ELSE.
READ DATASET p_inpfile INTO loc_string.
      IF sy-subrc NE 0.
        EXIT.
      ELSE.
        CLEAR loc2.
*Spliting fields in the file-
        REPLACE ALL OCCURRENCES OF '#' IN wa_string WITH ' '.
       SPLIT wa_string AT const INTO loc2-pernr
                                       loc2-werks
                                       loc2-persk
                                       loc2-vdsk1.
Hope you get some idea.
Thanks,
Sakthi C

How to check the numerica value

Dear Experts,
Would you please show me the code how to check a character value is numeric or not, include negative sign '-'.
For example the character value (01.-10) should not be a good numeric value use in later. the (-1.00) should be a good numeric value.
Thanks,
Helen

Hello,
Use the FM <b>NUMERIC_CHECK</b>
Regards,
Vasanth

How will check the space taken by a single table in a tablespace ?

How will check the space taken by a single table in a tablespace ?
dba_segments is giving the same values even if I truncate the table?
Pls reply

I need to know how can we find out the size of the table in the tablespace.use user_segments (bytes) column.
How much bytes it has taken ?value from user_segments, bytes column
If u delete records will the space be used for another table in same tablespace?No, it keep the space in the same table for future usage.
How can we free that space ?truncate or drop the table and reduce the size from tablespace, if you want to reclaim the space from the tablespace, OS level.
Jaffar

Hi, how can i break the value for a row and column once i have converted the image to the array???????

Hi, I would like to know how can i break the value for a row and column once i have converted the image to the array. I wanted to make some modification on the element of the array at a certain position. how can i do that?
At the moment (as per attachhment), the value of the new row and column will be inserted by the user. But now, I want to do some coding that will automatically insert the new value of the row and the column ( I will use the formula node for the programming). But the question now, I don't know how to split the row and the column. Is it the value of i in the 'for loop'? I've tried to link the 'i' to the input of the 'replace subset array icon' , but i'm unable to do it as i got some error.
Please help me!
For your information, I'm using LABView 7.0.

Hi,
Thanks for your reply.Sorry for the confusion.
I manage to change the array element by changing the row and column value. But, what i want is to allow the program to change the array element at a specified row and column value, where the new value is generated automatically by the program.
Atatched is the diagram. I've detailed out the program . you may refer to the comments in the formula node. There are 2 arrays going into the loop. If a >3, then the program will switch to b, where if b =0, then the program will check on the value of the next element which is in the same row with b but in the next column. But if b =45, another set of checking will be done at a dufferent value of row and column.
I hope that I have made the problem clear. Sorry if it is still confusing.
Hope you can help me. Thank you!!!!
Attachments:
arrayrowncolumn2.JPG ‏64 KB

How to disable right click option re-size on table column header?

Hi All,
Please let us know how to disable right click option re-size on table column header.
The issue is that when I right click on the column header, the column is selected and the context menu with options like Sort, Columns, Resize Columns, etc.. is popping. we want to disable column re-size option.
We are binding the table values programatically (not using Bc4J) and the Jdeveloper version is 11.1.2.2
Thanks in advance,
- Vignesh S.

Hi Gawish,
Thanks for the reply.
This will make the particular column frozen and only work for that particular column.
My use case is that to remove the resize columns option from the context menu or to disable the right click option.
Making column selection as none will disable the right click option but we need column selection for sorting.
Is there any other way to achieve this?
Thanks in advance,
-Vignesh S.

How to Check the total value of a field

Hi,
I want to check the total value of a field (this total is obtain by using property of that field thru personalization).
that means , in a table 3 columns are there (col 1, col2 & col3). I personalized the total property as true for col3.
now i'm getting the total for that field.
I want to check that total whether it crossed 100 or not.
How to do this?
Thanks in advance,
SAN

Hi San,
You can achieve by using OATotalRowBean, search for OATotalRowBean in this forum you should be able to get some sample code.
public class OATotalRowBean
extends TotalRowBean
implements OAWebBean, OAWebBeanConstants
A special row rendered at the bottom of a table which lets users see totals for columns which are designated for summing.
Note The total is calculated and displayed only for visible rows.
When you indicate that you want to total one or more columns, the OA Framework creates an OATotalRowBean and designates it as the columnFooter named child of the OATableBean. If the OATableBean is also configured to insert rows (so it has an "Add Another Row" button), then the total bean becomes an indexed child of the add table row bean (see OAAddTableRowBean), which the OA Framework in turn designates as the table's columnFooter object.
If you need to access the table's column footer object for any reason, call the OATableBean's getColumnFooter() method. If row insertions are enabled, this method returns an OAAddTableRowBean; otherwise it returns an OATableRowBean.
For detailed information about creating and working with tables, see OA Framework Developer Guide: Tables.
With regards,
Kali.
OSSi.

How to check non-numeric value in a field

Hi all,
I have a field 'MVALUE'. HOw can I check if I have a non-numeric value in my field. Let us say if I have a value '<25' in this field. How can I check if the value in this field is non-numeric. The field MVALUE is of CHAR datatype.
Please help. Waiting.........

Might have to add a space in the string...
if not mvalue co ' 0123456789'.
* error
endif.
if you allow decimals and commas...
if not mvalue co ' .,0123456789'.
* error
endif.

HOW TO CHECK THE CHECKBOX VALUE WITH SQLCE DATABASE

Hai All,
Good Day! I am using VB in Visual Studio 2008. I have a form with check boxes and one button control. If i selected the check box and then click the button, check the database table field and check box text are equal. if both are equal then
how to check?
I have tried it. The code is:
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim conn As New SqlCeConnection
Dim cmd As New SqlCeCommand
conn.ConnectionString = "DataSource = E:\Vbprojectex\WindowsApplication3\WindowsApplication3\Database1.sdf"
Try
cmd.Connection = conn
conn.Open()
If CheckBox1.CheckState = 1 Then
cmd.CommandText = "SELECT Aerator FROM ttabpagelist where Aerator = CheckBox1.Text"
TextBox1.Text = 1
End If
cmd.ExecuteNonQuery()
Finally
conn.Close()
End Try
End Sub
End Class
Thanks & Regards Sasi ................. Go Green

probably something like (ofc below will never give result since Aerator can't have 2 values, you will have to adjust the second check box column obviously)
Try
cmd.Connection = conn
conn.Open()
dim strsql as string = "= "SELECT Aerator FROM ttabpagelist "
Dim whereConcatenator As String = " WHERE "
Dim Wherestatement As String = String.Empty
If checkbox1.checked = True Then
Wherestatement += whereConcatenator
Wherestatement += "Aerator = " & checkbox1.Text
whereConcatenator = " AND "
End If
If checkbox2.checked = True Then
Wherestatement += whereConcatenator
Wherestatement += "Aerator = " & checkbox2.Text
End If
cmd.commandtext = strsql & wherestatement
TextBox1.Text = 1
End If
cmd.ExecuteNonQuery()
Finally
conn.Close()
End Try

How to check sign of value ' - ' and ' + '.

Hi Experts,
can you tell me what is the preocedure to check the sign
of value whether it would be ' - ' or ' + '.
if i have to check the sign of -1100 then system should tell me the sign is ' - ' . how it can be possible.

Hi,
Try this.
Check whether the value of variable say v1.
If v1< 0.
Then display the message as ' - '.
else.
Then display the message as ' + '.
endif.
The message is according to your requirement.
Sharin.

How to check for null values in bpel?? Please Help! very urgent!!!

Hello Guys,
I have a problem. I have an external webservice to which I have to post my request. My task is to create an Webservice and Service Assembly to which others would post request and get response. I have to create SA to deploy onto the bus.
The problem is that there are optional elements in the request and response xsd's. In the Response sometimes certain feilds may come or they may not. for Example:- my response could contain a tag like this <firstName></firstName>
I have to copy these feilds in my bpel process from one variable to another.(like in the mapper).
My Question is , Is there any way in BPEL process or BPEL mapper where I could Check for null values in the request or response???
Your inputs would be very helpful.
Thanks
Rajesh

Thanks for replying man :)
Ok I will be more clear.
Here is a snippet of one of the xsd's that I am using.
<xs:element name="returnUrl" nillable="false" minOccurs="0">
                    <xs:annotation>
                         <xs:documentation>Partner specifies the return URL to which responses need to be sent to, in case of
Async message model.
</xs:documentation>
                    </xs:annotation>
                    <xs:simpleType>
                         <xs:restriction base="xs:anyURI">
                              <xs:maxLength value="300"/>
                              <xs:whiteSpace value="collapse"/>
                         </xs:restriction>
                    </xs:simpleType>
               </xs:element>
This means that the return URL field can be there or it may not be there. But if it is there it cant be null because nillable=false. But the whole <returnURL> </returnURL> can be there or it may not be there because minOccurs=0.
My requirement is , if returnURL is there in the response with a value, then in my BPEL mapper I should map it else I should not map it.
Thats the issue.
and Yes kiran, the node be non-existant.
So can you please help me with this.
Thanks
Rajesh

How to check the source value is in between a string range in mapping

Hi Consultants,
I am working on IDOC to File scenario. I need to implement a specific requirement of our client. i.e. something like below;
Vendor number can be any thing like 1AA000000 / 1AA000001/1AB000000/... ect till 1ZZ999999.
if the vendor number is in between 1AA000000 -1ZZ999999 then the target value should assign as 'Internal' else should assing as 'External'.
How to compare that the value of vendor is in between IAA000000 to 1ZZ999999 in mapping?
Appreciate your help.
Thanks in advance.
Regards,
Nausheen

You can try creating an UDF and using the varName.substring(); method. Then you can compare in separated pieces the string. For example
String var = "1AA000000";
if (var.substring(3).compareTo("000000") < 0 && var.substring(3).compareTo("999999") > 0)
//compare now the "AA" and "ZZ" with the same logic;
http://download.oracle.com/javase/1.4.2/docs/api/java/lang/String.html#substring(int, int)
http://download.oracle.com/javase/1.4.2/docs/api/java/lang/String.html#compareTo(java.lang.Object)
EDIT: Moreover, those functions are available in the Mapping program creation, but this should give a clue on the order it should be done.
Edited by: Lucas Santos on Mar 29, 2011 7:38 PM
Edited by: Lucas Santos on Mar 29, 2011 7:53 PM

How to check whether a value is empty in ABAP Sql

Select matnr from mara where
MARA~LVORM is null
Basically if LVORM is blank, i.e., not popoulated, I want to get matnr.
Will above query accomplish this in ABAP OPEN SQL.

Hi,
LVORM column is defined as a NOT NULL column.. so the values will be either a initial value (space, in this case) or filled with some value
SELECT matnr
INTO TABLE t_matnr
FROM mara
WHERE LVORM = space.
https://cw.sdn.sap.com/cw/docs/DOC-40206
http://learnsapmdm.blogspot.com/2009/01/data-modelling-and-database-design-in.html
regards,
Paulo Carvalho

Loop not working for check of duplicate values in a repeating table

I have a form that is used for marking down problem items, describing the problems and assigning a value to the specified item. In some cases the problems belong to the same class. When they do, the value associated with the problem should only be marked once. If another problem in the same class is documented the value should not be recorded the second time. I have a variable that is called based on a switch statement in the exit event of the field that records the problem item number. The script in the variable is then supposed to check for duplicate values in the table. If no other problem item in that class is selected, then the problem value should be assigned a number. If another item from the same class has already been entered, then the problem value should just be left blank. I will paste the script for the variable below as well as the switch statement. When I used to call the variable based upon the change event for the problem item, the script work. At that time, the switch statement was related to a drop-down menu. We decided to get rid of the drop-down and just have the used type the item number. But to do so, I had to move the switch statement to the exit event for the field. when I did this, the script in the variable no longer worked properly. Here is the switch statment followed by the script in the variable:
this.rawValue = this.rawValue.toLowerCase();
var bEnableTextField = true;
var i = "Inspection Criteria: ";
var r = "Required Corrections: ";
switch (this.rawValue)
case "1a": // 1a- First debit option
    CorrectionsText.CorrectionLang = r+"Correction description for 1st debit";
    ViolCorrSection.ViolationsText.DebitVal = "C";
    ViolCorrSection.Reference.RefLanguage = i+"1st debit reference";
break;
case "1b": // 1b- Second debit option
    CorrectionsText.CorrectionLang = r+"Correction description for 2nd debit";
    ViolCorrSection.Reference.RefLanguage = i+"2nd debit reference";
    myScript.group1();
break; //the script continues for various item numbers...
________________ variable script ________________________
function group1()
//Used in checking duplication of violations
var oFields = xfa.resolveNodes("form1.MAINBODYSUB.ViolationsTableSubform.ViolationsTable.ViolCorrSectio n[*].ViolationsText.ItemNo"); // looks to resolve the repeating rows
var nNodesLength = oFields.length; //assigns the number of rows to a variable
var currentRow = xfa.resolveNode("form1.MAINBODYSUB.ViolationsTableSubform.ViolationsTable.ViolCorrSection ").index;
var currentDebit = xfa.resolveNode("form1.MAINBODYSUB.ViolationsTableSubform.ViolationsTable.ViolCorrSection [" + currentRow + "].ViolationsText.DebitVal");
for (var nNodeCount = 0; nNodeCount < nNodesLength; nNodeCount++) // this loops through Item Numbers looking for duplicate violations
//console.println("nNodeCount: " + nNodeCount);
var nFld = xfa.resolveNode("form1.MAINBODYSUB.ViolationsTableSubform.ViolationsTable.ViolCorrSection [" + nNodeCount + "]");
//console.println("nFld.ViolationsText.ItemNo: " + nFld.ViolationsText.ItemNo.rawValue);
     if (nFld.ViolationsText.ItemNo.rawValue == "1a" || nFld.ViolationsText.ItemNo.rawValue == "1b" || nFld.ViolationsText.ItemNo.rawValue == "1c" || nFld.ViolationsText.ItemNo.rawValue == "1d") // looks for other 1s
          currentDebit.rawValue = "";
          nNodeCount = nNodesLength; // stop loop
     else
        currentDebit.rawValue = "5";
So, if you enter 1b the first time, you should get a value of 5 appearing in the debit value field. If you enter 1c next, because it belongs to the same group of class of problem items, there should be no value assigned. What happens now is that the values for 1b and 1c don't appear at all because the form thinks that the first 1b entry already existed.
Any ideas? I have a stripped down version of the form that I can email to someone for reference if that would help. Thanks
P.S. I am working with LiveCycle Designer ES 8.2.1....

Hi,
I can have a look at your form, but can you host it somewhere like Acrobat.com or google docs and add a link to it here.
Regards
Bruce

How to check if a value is in a table column?

Similar Messages

Maybe you are looking for