How to check status of a particular port by using netstat command?

How to check status of a particular port by using netstat command?
I want to check port 443 in my server is open or not, is there any other way to check port via commandline?

Hi,
You can run the below command in an administrator command prompt on the server:
netstat -ano|findstr ":443"
-TP

Similar Messages

How to check for physical damage on a disk using the Command Line

I have a startup disk that I suspect of physical damage. The symptoms is that the server (10.4.7) would "hang" randomly, about once a day. I have already changed it and restored from a backup, and now everything is fine. However just out of curiosity are there any command line utilities to do a physical surface scan of the drive, like TechTool Pro but included in Mac OS X Tiger?
G4 Dual 1.42 Ghz Mac OS X (10.4.6)

Extract from the Command Line Guide for Tiger Server:
Checking for Disk Problems
You can use the diskutil or fsck command (fsck_hfs for HFS volumes) to check the physical condition and file system integrity of a volume. For more information, see the related man pages.
MacBook Pro Mac OS X (10.4.7)

Slow imac, how to check status and clean up disc?

slow imac, how to check status and clean up disc?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

How to check apache pl/sql listener port

hai
can any tell me how to check apache pl/sql listener port
Thanks
BhanuChander

You may get it by searching the portlist.ini file in the ORACLE_HOME of the product you use.....
So , for instance the following , are the ports those of Dev_Suite_Home:
Oracle Developer Suite HTTP port = 8889
Oracle Developer Suite JMS port = 9240
Oracle Developer Suite RMI port = 23910
Oracle HTTP Server Diagnostic port = 7200
Reports Services bridge port = 14011
Reports Services discoveryService port = 14021But ... note that these ports are valid only at the time of installation....!!!!
Greetings...
Sim

How to check the resolution of a pdf file using Acrobat 9 pro?

How to check the resolution of a pdf file using Acrobat 9 pro?

PDF files don't have one resolution, but may have none or many different resolutions, one per image. You can check the maximum/minimum resoluion with preflight in Acrobat Pro, but not in Adobe Reader.

How to check status of sent PO related IDOCS to XI...

Hello Experts,
I was just given a task to create a report wherein I need to check the status of
all PO(purchase order) related IDOCS that are sent to XI. Please tell me the steps on how to
check if those IDOCS are sent successfully or not.
Hope you can help me guys. Thank you and take care!

Hi,
In TCode- WE05 or WE02 you can check the status of idocs.
Status 03 says :'Data passed to port OK', it means Data has reached to ur Destination(In ur case its XI).
So just explore the above Tcode and see how you can fetch the status.
Thanks.
Note:Reward points if you find useful.

How to check if a Site Column is being used before deleting

Hi All,
Before deleting a SharePoint Online site column I would like to check to see if it is being used by any list or library. I know how to do this when the site is on
premise using a PowerShell script.
$web
= Get-SPWeb
http://”sitecollectionurl”
$column
= $web.Fields[“Column Display Name”]
$column.ListsFieldUsedIn()
but I am having problems doing it on a SharePoint Online site. I know how to connect to the site, but I can not find any information on getting the field details,
like above.
if ((Get-ModuleMicrosoft.Online.SharePoint.PowerShell).Count
-eq0) {
Import-Module
Microsoft.Online.SharePoint.PowerShell -DisableNameChecking
$username
= "[email protected]"
$url
= "https://mySite.sharepoint.com/sites/Dev"
Write-Host
"Connecting to SharePoint Online, URL = $url"
try
Connect-SPOService
-Url $url /
-credential $username
Write-Host "Successfully connected.."
-ForegroundColor Green
$web =
Get-SPOSite -Identity
https://mySite.sharepoint.com/sites/Team1
$column
= $web.Fields[“Column Display Name”]
$column.ListsFieldUsedIn()
=
$web.Fields[“Page Content”]
catch
Write-Error "Failed to connect to
$url - check the credentials and URL!"
$_
Write-Host
"Disconnecting from SharePoint Online, URL =
$url"
Disconnect-SPOService
Write-Host
"Successfully disconnected.."
-ForegroundColor Green
Does any know what I am doing wrong, or does anyone have a script examples.
Many thanks
Colin

Hi Colin,
Unfortunately the Get-SPOSite doesn't return a fully fledged SPWeb object like you're used to in On-Prem PowerShell.
The only way to get at particular objects like this is to use CSOM in PowerShell, however even then it doesn't return quite the same object that you see on prem. (In short, the method you want doesn't exist.. but I'll show you how to get there at least.)
You'll need the Microsoft.SharePoint.Client.dll installed (You can download the SharePoint 2013 Client SDK, just do a search for it.)
Once that's installed, then the following script will retrieve a single column which you can then run
$column | gm to see the available properties.
$siteCollectionURL = "https://<tenantname>.sharepoint.com/sites/etc"
$Credentials = Get-Credential -UserName "[email protected]" -Message "Enter the password for $AdminUser"
##Then we'll establish a ClientContext for CSOM.
$scContext = New-Object Microsoft.SharePoint.Client.ClientContext($siteCollectionURL)
$SPOcredentials = New-Object Microsoft.SharePoint.Client.SharePointOnlineCredentials($Credentials.UserName, $Credentials.Password)
$scContext.Credentials = $SPOcredentials
$web = $scContext.Web
$siteCols = $web.Fields
$column = $sitecols.GetByInternalNameOrTitle("ColumnInternalName")
$scContext.load($web)
$scContext.load($siteCols)
$scContext.Load($column)
$scContext.ExecuteQuery()
Once you run that, $column contains as much info as you can get about the column.
Paul.
Please ensure that you mark a question as Answered once you receive a satisfactory response. This helps people in future when searching and helps prevent the same questions being asked multiple times.

How to determine which IP address and port is used to make DNS queries?

I am using JNDI/DNS API to query a Enum server (Tel URI resolution in VOIP world) what is a DNS server.
But I have many network interfaces, in a VLAN environment, and I must to specify from which interface (and port)
all the requests are sent.
When I read the code of JNDI/DNS API (in JDK 1.5) and specially the DNSClient class, I can see that the
DatagramSocket is created without parameters... : udpSocket = new DatagramSocket();
How can I specify the IP address and port to use for my client???
Thanks for your help.

I must to specify from which interface (and port) all the requests are sent. You don't have to specify the interface unless your static unicast routing tables are incorrect, and you never have to specify the port unless some lunatic is in control of your firewall.

How to check which is th best method to use in LSMw and the file

Hi all,
I am new to LSMW,
Can know me when i get the file , how to check the which is the Best method ( Batch input, Direct input,BAPI, IDOC) have to use in LSMW .
How to check the input file is completely filled and how to check whether it is correct and also how to Prevalidation check has to be done fior the file before uploading.
Can you provide any documents LSMW also Apprecited.
Regards,
Madhavi

Hi Madhavi,
To check Correctness & completeness of the file:
1. The input file structure should be same as source structure what you defined whicle creating LSMW.
2. Check the following steps to assure the field mapping is done correctly.
a) Maintain field mapping & conversion rule
b) Check 'Display Read data'
c) Check ' Display Converted data''
Please note LSMW is a tool, which will simply upload the data whatever you are providing. So you need to be careful while making your file and validate it outside SAP ( before upload start)
Pradeep D

LabVIEW VI Server port using netstat command

Hi Ppl,
I have been trying to use the netstat command to find out the port of VI server for LabVIEW as well EXE's running VI Server. Here is how we do it
First we have to get the process ID of LabVIEW or the EXE using the task list command ->tasklist |find /i "labview"
We then use the netstat command to find out the ports in which LabVIEW is listening ->netstat -a -o -n |find /i "<process id>"
I quite surprised to see that actually LabVIEW is listening in more than one port, here is the response to the above command:
  TCP 0.0.0.0:3363 0.0.0.0:0 LISTENING 7120
  TCP 127.0.0.1:55462 0.0.0.0:0 LISTENING 7120
  TCP 0.0.0.0:3363 0.0.0.0:0 LISTENING 7120  TCP 127.0.0.1:55462 0.0.0.0:0 LISTENING 7120
Here 3363 is the VI Server port that I'm using. I'm wondering what is the other port ? Is there any way that will help us narrow down to the VI Server port from these ports?
Thanks,
Sathish

127.0.0.1 is localhost. A server binding to that should be only accessible from local applications. Most likely it has to do with the LabVIEW online help or example finder application. The online help allows to drop for instance functions into your LabVIEW diagram and there has to be some form of interapplication communication for that to make it work. I would guess they do it through TCP/IP rather than a Windows only solution to allow this to work on non-Windows platforms too.
Other than that it is obvious that the 0.0.0.0 address is the VI server listen socket as it will need to be able to allow connections by remote clients too.
And the VI server default port is 3363. To use a different port you have to have a specific entry in your LabVIEW or executable ini file. So reading the ini file instead would seem even simpler.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

How to open a database object for view/edit using a command (v. 3.2.20.09)

How can I open a database object for view or edit using a command in Oracle SQL Deveveloper?
I find browsing or search for object in a large database to be slow and too cumbersome.

Shift-F4 (pop-up descrribe) on a table name in the worksheet will let you view table details, but there is no quick edit.
You can use filters on the object browser to reduce the number of visible objects.

Copying files from one to other location.. How to check status in run mode on front panel?

Hi guys , can anyone tel me that how can I check the copying status in real time while VI is running.. e.g lets say I am coping files from location A to location B and the data is quite large so if somewhere in between there is an error I can not figure out when the problem occurred. Is this possible that I know while staying on the front panel about the amount of data copied and how much is left etc..because I think it will be easy to track error if there will be any..
Naqqash

Hi,
I tried to do it, but from some reason I failed. Here are some links about function and how to do it:
http://msdn.microsoft.com/en-us/library/bb762164%28v=vs.85%29.aspx
http://msdn.microsoft.com/en-us/library/bb759795%28v=vs.85%29.aspx
http://www.docstoc.com/docs/31464530/Passing-Labview-Cluster-to-C-Structure-in-DLL
In the attachment is what I've been trying for the last half an hour. I did it before, but never using cluster -> structure casting.
Paul
Attachments:
copyfile.vi ‏13 KB

Two JetDirects in one HP-5550dtn, how to check status of the card from the "other" network

I have CLJ5550 connected to two distinct LAN.
Card 1 is a J7934G installed in EIO1 slot connected to LAN1
Card 2 is a J3113A installed in EIO2 slot connected to LAN2
This setup seem to work, except I can not use the web interface on LAN2. (telnet is OK but network configured by DHCP so no porblem).
Is it possible to check the status of card2 from LAN1 some way? I would prefer an snmp tool or just OID for the second interface from there I can figure. Or any scriptable (linux) probe.
What I have tried is snmpwalk (on a linux host) from LAN1 I only seem to get info on the first card no mention of either EIO or other interface, although there is info provided about storage RAM disk etc. And by the way, this is the same with the web interface I can only tell that Card2 installed but nothing about it's configuration. Before you ask, no I can not do the monitoring from LAN2 I do not "own" that part.
Right now, I would be happy just to be able to know if the card2 connected and up... I am having problems related to LAN2 dropping off (smart switch disabling port) We are trying to determine why.
If anyone have any suggestions, I can provide more detials as needed.
Thanks,
Gabor

For ABAP case, ccBPM is required only for calling mapping (transform step). You can call method of standard message data retriver class in any custom ABAP mapping anywhere.

How to get status of a particular sales order Number

hi can anybody tell me the way which we get the status of various SOrders and it should check some seven conditions and display the status , the following are the statuses to be displayed.
a.     Mark as O (open) = Get the VBUK-LFSTK where VBAK-VBELN, If VBUK-LFSTK is A show the sales order status open
b.     Mark as H (on Hold) = Pull the VBAK-VBELN reference to VBAK-LIFSK. If the sales order has the delivery block (15 IBM Pending BOP file )
c.     Mark as D (Drop/Pull) = Get the LIKP-VBELN reference to VBAK-VBELN and give the LIKP-VBELN for VBUK- VBELN and if the VBUK- LVSTK is A then it is dropped.
d.     Mark as N (pending) = Get LIKP-LIFSK from the LIKP-VBELN where VBAK-VBELN if the status is either 12, 13,14,15,16 and 17
e.     Mark as F (Floor) = Get the LIKP-VBELN reference to VBAK-VBELN and give the LIKP-VBELN for VBUK- VBELN and if the VBUK- LVSTK is C then it is transferred to the floor.
f.     Mark as K (Kitted) = Get the LIKP-VBELN reference to VBAK-VBELN and give the LIKP-VBELN for VBUK- VBELN and if the VBUK- LVSTK is B then it is kitted.
g.     Mark as P (packed)= Get LIKP-VBELN reference VBAK-VBELN and give LIKP-VBELN as an input for VBUK- PKSTK and PKSTK isC
h.     Mark as G (PGI) = Get LIKP-VBELN reference VBAK- VBELN and give LIKP-VBELN as an input for VBUK-WBSTK is C
Mark as E (EDI Error) in following two scenarios = If VBUK-LFGSK not equal to C for the sales order, then search VBAK-LIFSK then it is an EDI Error if values are: 14 or 17. On the other hand, If VBUK-LFGSK is equal C for the sales order, then search the delivery header LIKP-LIFSK it is an EDI Error if values are: 14 or 17

Check field VBUK-GBSTK (Overall processing status of document).
regards,
srinivas
<b>*reward for useful answers*</b>

How to check status of a spool request.

I need to check the status of the spool-id created by my smartform
Is there any function module to do so ??

Hi
Check the table TSP01 or other TSP* tables for the status of the spool related to your smartform
Reward points for useful Answers
Regards
Anji

How to check status of a particular port by using netstat command?

Similar Messages

Maybe you are looking for