How to clone a new machine from another with different hardware
How do I clone a new Sun Blade 2500 from a Sun Blade 1000 (with Solaris8)?
Is ufsdump/ufsrestore a solution? Are all needed drivers included in the kernel from the Sun Blade 1000? Or, do I first need to install patches/updates on the Sun Blade 1000?
Or, what's a better solution? Please no solutions like jumpstart, only simple cloning.
Thanks.
This isn't a simple process. The cleanest way is to take a flash archive of the Sun Blade 1000 then install it on the 2500. There is good documention for this on the Sun Blue Prints web page www.sun.com/blueprints.
Below is the down and dirt way of doing it.
Follow the instructions exactly and it will work.
1. Make sure OS supports both hardware architectures
2. Make sure you disconnect any storage except boot devices
3. Make sure boot device is unencapsulated
With a disk with the OS from the Sun Blade 1000 on it in the Sun Blade 2500. I put a disk in the master server (the Sun Blade 1000) and copy the OS using ufsdump to the disk and then take the disk and put it in the clone (the Sun Blade 2500).
4. From OK prompt, boot single user from a cdrom of the same OS which your boot disk is using
5. Use the installboot command to install the boot block on the new drive.
6. Use the uname -i command to make sure you use the right architecture.
7. Make boot block
# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk/dev/rdsk/c?t0d0s0
8. Mount boot slice to be modified
# mount /dev/dsk/c0t1d0s0 /mnt
9. Remove old systems device tree. Delete the following files and directories.
# rm -r /mnt/devices/*
# rm /mnt/dev/dsk/*
# rm /mnt/dev/rdsk/*
# rm /mnt/etc/path_to_inst
# touch /mnt/etc/path_to_inst
# rm -r /mnt/dev/cfg/* (solaris 8 and 9)
# rm /mnt/dev/.dev*
10. Build new device tree and path_to_inst
# drvconfig -r /mnt/devices -p /mnt/etc/path_to_inst
# devlinks -r /mnt
# disks -r /mnt
# tapes -r /mnt
# ports-r /mnt
# audlinks -r /mnt
11. Make sure you update /etc/vfstab to reflect the new device target and slices.
12. Reboot machine, you may have run a couple boot -r to clean other devices up.
13. Perform another boot -r to bring in storage.
Good luck
Earle
Similar Messages
-
How can I read pdf files from LabVIEW with different versions of Acrobat reader?
How can I read pdf files from LabVIEW with different versions of Acrobat reader?
I have made a LabVIEW program where I have possibility to read a PDF document. When I made this LabVIEW program it was Acrobat Reader 5.0.5 that was installed on the PC. Lather when the Acrobat Reader was upgraded to version 6.0, there was an error when VI tries to launch the LabVIEW program. And Later again when we upgraded to Acrobat Reader 7.0.5 I must again do some changes and rebuild the EXE files again
It isn't so very big job to do the changes in one single LabVIEW program, but we have built a lot of LabVIEW programs so this take time to due changes every time vi update Acrobat Reader. (We have build EXE files.)
The job is to right click the ActiveX container and Click "Insert ActiveX Object", then I can brows the computer for the new version of acrobat Reader. After this I must rebuild all the "methods" in the Activex call to make the VI executable again.
Is there a way to build LabVIEW program so I don't have to do this job every time we update Acrobat Reader?
This LabVIEW program is written in LabVIEW 6.1, but I se the problem is the same in LabVIEW 8.2.
Jan Inge Gustavsen
Attachments:
Show PDF-file - Adobe Reader 7-0-5 - LV61.vi 43 KB
Read PDF file.jpg 201 KB
Show PDF-file - Adobe Reader 5-0-5 - LV61.vi 42 KBhi there
try the vi
..vi.lib\platform\browser.llb\Open Acrobat Document.vi
it uses DDE or the command line to run an external application (e.g. Adobe Acrobat)
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!" -
How do I stop new tabs from opening with Bing (i've check the add-ons and extenstions)
My homepage works fine, but when I open a new tab, that page opens to a Bing search page. I've gone to tools>add-ons> and searched both add-ons and extensions... there nothing listed there that refers to Bing.
Once the tab opens, i can hit my home button which takes me to my home page, but that step is annoying.Have u installed any new programs lately... when I do I breeze through installation but they always try to get you to install bing or ask.com as your homepage.. Anyway u can email me if u have not figured it out yet and maybe I could help. Jc
[email protected] -
How can I edit my website from another computer? and how can I create a new website next to the one, I already have? Can anyone help, please?
Move the domain.sites file from one computer to the other.
The file is located under User/Library/Application Support/iWeb/domain.sites. Move this file to the same location on the other computer and double click and iWeb will open it. Remember, it is your User Library that you want and not your System Library, as you will not find iWeb there.
Just create a new site on the same domain file and it will appear below the other site. If you want them side by side then duplicate your domain file and have one site per a domain file and they can then be side by side. -
How do i use a Time Machine from another computer from Time Capsule with multibackups
Can Iuse a Time Machine from another computer from Time Capsule with multibackups
Not sure what you are asking here.
Time Machine is software on a Mac that is used to backup that Mac to a Time Capsule hard drive.
Are you asking if another Mac can backup to the same Time Capsule that other Macs are already using?
Or, if not....please clarify on exactly what you want to do. -
How do you Deauthorize a machine from your account
Hi all, I don't know if I'm posting in the right place or not, If I'm not then I'm sorry. How do you Deauthorize a Machine from your account, anybody know? what it is. When I set the account up to buy tracks from Itunes. I was using the same Laptop that I'm using now, Just a differnt hard drive as The old hard drive died on me. I never bought any tracks from Itunes so I didn't have any to lose. I couldn't deauthorize this laptop because I didn't know that the laptop was going to die on me. In went the new hard drive. re-installed windows xp pro & re-installed itunes 8.1 clicked on authorize this machine & it came up with 3 machines out of 5. it's the same Laptop on the account. how to I remove this laptop twice from the account is it possible cheers?, If i do remove 1 of the machines, will I lose the rights to play back the tracks that I've bought today?
You can't deauthorise 'dead' installations or computers you no longer have access to individually. However once you reach the limit of 5 authorisations you have the option to deauthorise them all in one go from your iTunes account and start over. *Just note that you can only use this option once a year*: About iTunes Music Store Authorisation and Deauthorisation
See also this article: One computer using multiple iTunes Music Store authorizations -
How to create a new connection from SAPGUI to Test drive?
Hi,
I have installed Sap Netweaver Test drive on a linux virtual machine (windows host). The installation was successful and I was able to start the instance (application server and the database), yet I don't know how to create a new connection from my SAPGUI client (7.20) to this server. The static IP address of the server is 192.168.1.160.
I entered the following values for my new connection entry
Description: SAP Netweaver
Application server: 192.168.1.160
Instance number: 01
System ID: DB2
SAProuter: /H/192.168.1.160/S/3201/H/
But it does not work. Any idea about the values needed for creating a new entry?
Thanks in advance,
Dariyoosh>
Dibya R Das wrote:
> Why are you entering a router string? Can't you reach a box directly from your machine?
>
> Doesn't a ping to that host & a "telnet <host/ip address> 3201" work from your machine to the SAP System.
>
> Remove the router string you wont need if the above works.
>
> - Regards, Dibya
Hello there,
Thank you very much for your answer which solved my problem. In fact there was no need of providing router string.
Kind Regards,
Dariyoosh -
How to call a Java class from another java class ??
Hi ..... can somebody plz tell me
How to call a Java Class from another Java Class assuming both in the same Package??
I want to call the entire Java Class (not any specific method only........I want all the functionalities of that class)
Please provide me some slotuions!!
Waiting for some fast replies!!
Regards
Smita MohantyHi Smita,
you just need to create an object of that class,thats it. Then you will be able to execute each and every method.
e.g.
you have developed A.java and B.java, both are in same package.
in implementaion of B.java
class B
A obj = new A();
//to access A's methods
A.method();
// to access A's variable
//either
A.variable= value.
//or
A.setvariable() or A.getvariable() -
How do you call a method from another class without extending as a parent?
How do you call a method from another class without extending it as a parent? Is this possible?
Why don't you just create an instance of the class?
Car c = new Car();
c.drive("fast");The drive method is in the car class, but as long as the method is public, you can use it anywhere.
Is that what you were asking or am I totally misunderstanding your question?
Jen -
How to Create a new column from two different result sets
How to Create a new column from two different result sets, both the result set uses the different date dimensions.
i got solutions for this is apply filters in column formula it self, based on the requirement.
-
If I imported a CD into my iTunes library from one computer how can I listen to it from another computer? I imported music from a CD into my compter at work and when I got home and went to my iTunes account none of the songs were in my library. I also noticed that on my Work computer there were a couple songs that I had to click on the little 'cloud' icon before I could listen to them (these were not songs I imported they were songs that were already in my library). Not sure if this makes semse...help.
jamie171 wrote:
My question is since I have imported them into my iTunes library from one computer why can't I access them from my iTunes library from another computer that I have authorized to access whats in my library? Is there no way to import songs only once into the library and then access them from all my authorized computers?
Only if you have iTunes Match or of the computers are on the same local network. -
HT1386 How do I unsync my phone from another person's account?
How do I unsync my phone from another person's account? Another family member's phone was synced into the computer. As I tried to sync my phone it automatically synced into the account of the other phone. How do I sync my phone under my name so I can sync what is on my phone?
Create another user profile on the computer so that you can log in as yourself and have your own copy of iTunes.
-
How to display a new view from a nib ?
how to
display a new view from a nib in the main window after clicking on a button.
When I click a the button named for example "goToGokyo", the link to my procedure
runs correctly because I see my NSLog message "goToGokyo button pressed".
My nib, which name is "GokyoViewController" does exist.
I did as follow for the moment but I'm stuck now, my nib :
- (IBAction)goToGokyo:(id)sender
NSLog(@"goToGokyo button pressed");
//[self stopSound];
if (gokyoViewController == nil)
GokyoViewController *aGokyoViewController = [[GokyoViewController alloc]
initWithNibName:@"GokyoViewController" bundle:nil];
self.gokyoViewController = aGokyoViewController;
//[aGokyoViewController release];
[self GokyoView:gokyoViewController animated:YES completion: nil];
Thanks in advance for your advice.
CheersI did that now :
- (IBAction)btnLoadMyViewController:(id)sender
NSViewController *viewController = [[NSViewController alloc] initWithNibName:@"MyView" bundle:nil];
NSView *view = [viewController view];
[_myWindowController.window setContentView:view];
//view addSubview:view];
//[self.myView addSubview:view];
Using
"_myWindowController.window setContentView:view];"
or
"[self.myView addSubview:view];"
does not an error but does nothing !
Would you help me one more times please ?
Thanks in advance -
How do I control my mac from another mac not in the same network?
How do I control my mac from another mac not in the same network? Thanks
You can do it manually, but it is much simpler if you use a tool such as Back To My Mac, LogMeIn, or something like that. Those programs enable you to connect to your computer through your router without you having to adjust the router settings manually.
-
How to open a new window from the login window?
hi,
can someone tell me how to open a new window from an existing window, here by window i mean frame. The case is i hv two java files - oracle.java and FDoptions.java. The first frame is in the Login.java. The oracle.java file has a button "Login", when it is clicked, i want to open the next frame which is in the file FDoptions.java. Can some one help me with this? I m giving the code below -
oracle.java
import java.awt.BorderLayout;
import java.awt.FlowLayout;
import java.awt.GridLayout;
import java.awt.event.ActionEvent;
import javax.swing.AbstractAction;
import javax.swing.BorderFactory;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.JPasswordField;
import javax.swing.JTextField;
* The application's main frame.
public class oracle {
private JFrame frame;
private JPanel logInPanel;
private JButton clearButton;
private JButton logInButton;
private JButton newuserButton;
private JButton forgotpasswordButton;
private JTextField userNameTextField;
private JPasswordField passwordTextField;
public oracle() {
initComponents();
private final void initComponents() {
JLabel userNameLabel = new JLabel("User name: ");
JLabel passwordLabel = new JLabel("Password: ");
userNameTextField = new JTextField();
passwordTextField = new JPasswordField();
JPanel userInputPanel = new JPanel(new GridLayout(2, 2, 5, 5));
userInputPanel.setBorder(BorderFactory.createEmptyBorder(10, 20, 10, 20));
userInputPanel.add(userNameLabel);
userInputPanel.add(userNameTextField);
userInputPanel.add(passwordLabel);
userInputPanel.add(passwordTextField);
logInButton = new JButton(new LogInAction());
clearButton = new JButton(new ClearAction());
newuserButton = new JButton(new NewUserAction());
forgotpasswordButton = new JButton(new ForgotPassword());
JPanel buttonPanel = new JPanel(new FlowLayout(FlowLayout.CENTER));
JPanel buttonPanel1 = new JPanel(new FlowLayout(FlowLayout.RIGHT));
buttonPanel.add(logInButton);
buttonPanel.add(clearButton);
buttonPanel1.add(newuserButton);
buttonPanel1.add(forgotpasswordButton);
logInPanel = new JPanel(new BorderLayout());
logInPanel.add(userInputPanel, BorderLayout.NORTH);
logInPanel.add(buttonPanel, BorderLayout.CENTER);
logInPanel.add(buttonPanel1,BorderLayout.SOUTH);
frame = new JFrame("FD Tracker");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.setSize(500, 500);
frame.setContentPane(logInPanel);
frame.pack();
frame.setVisible(true);
private void performLogIn() {
// Log in the user
System.out.println("Username: " + userNameTextField.getText());
char[] password = passwordTextField.getPassword();
System.out.print("Password: ");
for(char c : password) {
System.out.print(c);
System.out.println();
private void performClear() {
// Clear the panel
System.out.println("Clearing the panel");
userNameTextField.setText("");
passwordTextField.setText("");
private final class LogInAction extends AbstractAction {
public LogInAction() {
super("Log in");
@Override
public void actionPerformed(ActionEvent e) {
performLogIn();
private final class ClearAction extends AbstractAction {
public ClearAction() {
super("Clear");
@Override
public void actionPerformed(ActionEvent e) {
performClear();
private final class NewUserAction extends AbstractAction{
public NewUserAction(){
super("New User");
@Override
public void actionPerformed(ActionEvent e){
JFrame newuser = new JFrame("NewUser");
private final class ForgotPassword extends AbstractAction{
public ForgotPassword(){
super("Forgot Password");
@Override
public void actionPerformed(ActionEvent e){
JFrame forgotpassword = new JFrame("Forgot Password");
public static void main(String args[]) {
new oracle();
FDoptions.java
import java.awt.FlowLayout;
import java.awt.BorderLayout;
import java.awt.GridLayout;
import java.awt.event.ActionEvent;
import javax.swing.AbstractAction;
import javax.swing.BorderFactory;
import javax.swing.JPanel;
import javax.swing.JButton;
import javax.swing.JFrame;
public class Fdoptions{
private JFrame fdoptions;
private JPanel fdoptpanel;
private JButton enterfdbutton;
private JButton viewfdbutton;
public Fdoptions() {
initComponents();
private final void initComponents(){
fdoptpanel = new JPanel(new BorderLayout());
fdoptpanel.setBorder(BorderFactory.createEmptyBorder(80,50,80,50));
enterfdbutton = new JButton(new EnterFDAction());
viewfdbutton = new JButton(new ViewFDAction());
JPanel enterbuttonpanel = new JPanel(new FlowLayout(FlowLayout.CENTER));
JPanel viewbuttonpanel = new JPanel(new FlowLayout(FlowLayout.CENTER));
enterbuttonpanel.add(enterfdbutton);
viewbuttonpanel.add(viewfdbutton);
fdoptpanel.add(enterbuttonpanel,BorderLayout.NORTH);
fdoptpanel.add(viewbuttonpanel,BorderLayout.SOUTH);
fdoptions = new JFrame("FD Options");
fdoptions.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
fdoptions.setSize(1000,1000);
fdoptions.setContentPane(fdoptpanel);
fdoptions.pack();
fdoptions.setVisible(true);
private void performEnter(){
private void performView(){
private final class EnterFDAction extends AbstractAction{
public EnterFDAction(){
super("Enter new FD");
public void actionPerformed(ActionEvent e){
performEnter();
private final class ViewFDAction extends AbstractAction{
public ViewFDAction(){
super("View an existing FD");
public void actionPerformed(ActionEvent e){
performView();
public static void main(String args[]){
new Fdoptions();
}nice day,
these lines..., despite the fact that this example is about something else, shows you two ways
1/ modal JDialog
2/ two JFrame
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
* Parent Modal Dialog. When in modal mode, this dialog
* will block inputs to the "parent Window" but will
* allow events to other components
* @see javax.swing.JDialog
public class PMDialog extends JDialog {
private static final long serialVersionUID = 1L;
protected boolean modal = false;
private WindowAdapter parentWindowListener;
private Window owner;
private JFrame blockedFrame = new JFrame("No blocked frame");
private JFrame noBlockedFrame = new JFrame("Blocked Frame");
public PMDialog() {
noBlockedFrame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
noBlockedFrame.getContentPane().add(new JButton(new AbstractAction("Test button") {
private static final long serialVersionUID = 1L;
@Override
public void actionPerformed(ActionEvent evt) {
System.out.println("Non blocked button pushed");
blockedFrame.setVisible(true);
noBlockedFrame.setVisible(false);
noBlockedFrame.setSize(200, 200);
noBlockedFrame.setVisible(true);
blockedFrame.setDefaultCloseOperation(JFrame.HIDE_ON_CLOSE);
blockedFrame.getContentPane().add(new JButton(new AbstractAction("Test Button") {
private static final long serialVersionUID = 1L;
@Override
public void actionPerformed(ActionEvent evt) {
final PMDialog pmd = new PMDialog(blockedFrame, "Partial Modal Dialog", true);
pmd.setSize(200, 100);
pmd.setLocationRelativeTo(blockedFrame);
pmd.getContentPane().add(new JButton(new AbstractAction("Test button") {
private static final long serialVersionUID = 1L;
@Override
public void actionPerformed(ActionEvent evt) {
System.out.println("Blocked button pushed");
pmd.setVisible(false);
blockedFrame.setVisible(false);
noBlockedFrame.setVisible(true);
pmd.setVisible(true);
System.out.println("Returned from Dialog");
blockedFrame.setSize(200, 200);
blockedFrame.setLocation(300, 0);
blockedFrame.setVisible(false);
public PMDialog(Dialog parent, String title, boolean isModal) {
super(parent, title, false);
initDialog(parent, title, isModal);
public PMDialog(Frame parent, String title, boolean isModal) {
super(parent, title, false);
initDialog(parent, title, isModal);
private void initDialog(Window parent, String title, boolean isModal) {
owner = parent;
modal = isModal;
parentWindowListener = new WindowAdapter() {
@Override
public void windowActivated(WindowEvent e) {
if (isVisible()) {
System.out.println("Dialog.getFocusBack()");
getFocusBack();
private void getFocusBack() {
Toolkit.getDefaultToolkit().beep();
super.setVisible(false);
super.pack();
super.setLocationRelativeTo(owner);
super.setVisible(true);
//super.toFront();
@Override
public void dispose() {
owner.setEnabled(true);
owner.setFocusableWindowState(true);
super.dispose();
@Override
@SuppressWarnings("deprecation")
public void hide() {
owner.setEnabled(true);
owner.setFocusableWindowState(true);
super.hide();
@Override
public void setVisible(boolean visible) {
boolean blockParent = (visible && modal);
owner.setEnabled(!blockParent);
owner.setFocusableWindowState(!blockParent);
super.setVisible(visible);
if (blockParent) {
System.out.println("Adding listener to parent ...");
owner.addWindowListener(parentWindowListener);
try {
if (SwingUtilities.isEventDispatchThread()) {
System.out.println("EventDispatchThread");
EventQueue theQueue = getToolkit().getSystemEventQueue();
while (isVisible()) {
AWTEvent event = theQueue.getNextEvent();
Object src = event.getSource();
if (event instanceof ActiveEvent) {
((ActiveEvent) event).dispatch();
} else if (src instanceof Component) {
((Component) src).dispatchEvent(event);
} else {
System.out.println("OUTSIDE EventDispatchThread");
synchronized (getTreeLock()) {
while (isVisible()) {
try {
getTreeLock().wait();
} catch (InterruptedException e) {
break;
} catch (Exception ex) {
ex.printStackTrace();
System.out.println("Error from EDT ... : " + ex);
} else {
System.out.println("Removing listener from parent ...");
owner.removeWindowListener(parentWindowListener);
owner.setEnabled(true);
owner.setFocusableWindowState(true);
@Override
public void setModal(boolean modal) {
this.modal = modal;
public static void main(String args[]) {
new PMDialog();
}
Maybe you are looking for
-
How to resolve JMSExceptions:045032 when creating a JMS Topic
I am using Weblogic 12c (12.1.1.0). I have created a new managed server. I have created a JMS server targeted to the new managed server. I have created a JMS module targeted to the new managed server. I have created a JMS Subdeployment which targets
-
Does the iPhone support 802.11n?
After reading the tech specs via the link below, it looks like the iPhone does not support 802.11n, however, I remember reading somewhere that it did. Can anyone confirm? http://www.apple.com/iphone/specs.html
-
Hello experts, I have an issue with the output of a report. If I run the program on line, the output is okay. If run in background, the output is sent to the spool file. The problem is when view the report in spool file, the report column wrap aro
-
I'm trying to set my preferences so that all documents print double-sided automatically without my having to remember to click the "Print on both sides of paper" button. I print literally thousands of PDF files! Duplexed. How do I set this as a pr
-
Standard table to find all cubes loaded recently
Hi, Is there any standard table to find out for all cubes in the system when it was loaded recently? Please let me know.... Thanks in advance, Jaya