How to color the title in ALV grid
Hi all,
There is a title getting displayed in my ALV grid. could any one pls tell if there is any possibililty to colour it.
Thanks
Hi Deepti,
Kindly check this out:
MACROS
FIELD CATALOGUE ENTRY FOR Keyed FIELDS
DEFINE catfield.
1= Fieldname, 2= Description, 3=Key
clear ls_fieldcat.
ls_fieldcat-fieldname = &1.
ls_fieldcat-key = &3.
ls_fieldcat-hotspot = &3.
ls_fieldcat-key_sel = 'X'.
ls_fieldcat-tabname = 'T_OUT'.
Output length will be optimised by ALV
ls_fieldcat-outputlen = '6'.
ls_fieldcat-seltext_m = &2.
append ls_fieldcat to gt_fieldcat.
color C or X 1-9 = color number 0/1 intensified 0/1 inverse
ls_fieldcat-emphasize = 'C100'.
END-OF-DEFINITION.
FIELD CATALOGUE ENTRY FOR SUMMED FIELDS
DEFINE catsum.
1= Fieldname, 2= color, 3= Description,
clear ls_fieldcat.
ls_fieldcat-fieldname = &1.
ls_fieldcat-do_sum = 'X'.
ls_fieldcat-key_sel = 'X'.
ls_fieldcat-tabname = 'T_OUT'.
ls_fieldcat-emphasize = &2.
ls_fieldcat-seltext_m = &3.
append ls_fieldcat to gt_fieldcat.
END-OF-DEFINITION.
Similar Messages
-
How to color a row in ALV grid display
Hi,
A few rows in the output of ALV grid display should be shown in different color.How can I achieve this?Hi,
Try out this code
DATA : BEGIN OF G_T_CASH OCCURS 0,
PARTICULARS TYPE CHAR120,
AMOUNT1 TYPE CHAR20,
AMOUNT2 TYPE CHAR20,
AMOUNT3 TYPE CHAR20,
ROW_COLOR TYPE CHAR4,----
add this in the internal table for alv
END OF G_T_CASH.
CLEAR G_WA_CASH.
G_WA_CASH-PARTICULARS = 'Opening Cash Balance'.
G_WA_CASH-AMOUNT1 = G_DMBTR.
G_WA_CASH-AMOUNT2 = ''.
G_WA_CASH-AMOUNT3 = ''.
while appending other values also add the following code
G_WA_CASH-ROW_COLOR = 'C200'.----- C200 depicts light gray color
APPEND G_WA_CASH TO G_T_CASH.
add the following code in layout
MOVE 'ROW_COLOR' TO WA_LS_LAYOUT-INFO_FIELDNAME.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_BYPASSING_BUFFER = ' '
I_SAVE = 'A'
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IS_LAYOUT = WA_LS_LAYOUT
IT_FIELDCAT = G_T_CATALOG
IT_EVENTS = GT_EVENTS
TABLES
T_OUTTAB = G_T_CASH[]
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Let me know if the problem still persist.
Regards,
Janaki -
How to capture the event in ALV grid display?
Hi experts,
How to capture the event in an ALV grid display which is editable. I have to capture the TAB key or ENTER key.
regards,
Arul Jothi.Hi Arul,
Take a look at sample program BCALV_EDIT_03. (Find string "register ENTER" in the program to see how to register)
Basically you have to Register edit events using method call REGISTER_EDIT_EVENT and then write a handler method for event DATA_CHANGED..
If you are using a REUSE..GRID fm then first get the grid reference using function module GET_GLOBALS_FROM_SLVC_FULLSCR and then repeat the above procedure..
Hope this helps..
Sri
Message was edited by: Srikanth Pinnamaneni -
Color a line in ALV Grid Control
<<Do not ask for or offer points>>
Hi all,
How to color a line in ALV Grid Control using OOPs.
The appropriate replies will be rewarded.
regards,
S Philip
Edited by: Matt on Dec 22, 2008 11:05 AM<<Points unassigned - cut and paste not allowed. http://sgstocks.tripod.com/alvgrid_control.htm>>
Hi,
To color a line, the structure of the table must include a Char4 field for color properties
TYPES: BEGIN OF st_sflight.
INCLUDE STRUCTURE zsflight.
Field for line color
types: line_color(4) type c.
TYPES: END OF st_sflight.
TYPES: tt_sflight TYPE STANDARD TABLE OF st_sflight.
DATA: gi_sflight TYPE tt_sflight.
Loop trough the table to set the color properties of each line. The color properties field is
Char 4 and the characters is set as follows:
Char 1 = C = This is a color property
Char 2 = 6 = Color code (1 - 7)
Char 3 = Intensified on/of = 1 = on
Char 4 = Inverse display = 0 = of
LOOP AT gi_sflight INTO g_wa_sflight.
IF g_wa_sflight-paymentsum < 100000.
g_wa_sflight-line_color = 'C610'.
ENDIF.
MODIFY gi_sflight FROM g_wa_sflight.
ENDLOOP.
Name of the color field
gs_layout-info_fname = 'LINE_COLOR'.
Grid setup for first display
CALL METHOD go_grid->set_table_for_first_display
EXPORTING i_structure_name = 'SFLIGHT'
is_layout = gs_layout
CHANGING it_outtab = gi_sflight.
Regards,
John
Edited by: Matt on Dec 22, 2008 11:18 AM -
How to color a text(font) in GRID?
hii..can i color a <b>tex</b>t(not cell using slis_layout_alv-info_fieldname) in GRID display..if so please give me an idea or sample code... thanks in advance..
Check out these threads.
Color Cells in ALV Grid
Change Color of Cell in ALV Grid
How to color a row of alv grid
Reward points for useful Answers
Regards
Karthik -
How to enable excel downloading in ALV grid report.
Hi all,
How to enable excal downing in ALV grid report?
Thanks in Advance.
Siva Sankar.hi
check the following code
Example of a Simple ALV Grid Report
REPORT ZTUFI091 .
*& Report ZDEMO_ALVGRID *
*& Example of a simple ALV Grid Report *
*& The basic requirement for this demo is to display a number of *
*& fields from the EKKO table. *
*REPORT zdemo_alvgrid .
TABLES: ekko.
type-pools: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
gd_tab_group type slis_t_sp_group_alv,
gd_layout type slis_layout_alv,
gd_repid like sy-repid,
gt_events type slis_t_event,
gd_prntparams type slis_print_alv.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform build_events.
perform build_print_params.
perform display_alv_report.
*& Form BUILD_FIELDCATALOG
Build Fieldcatalog for ALV Report
form build_fieldcatalog.
There are a number of ways to create a fieldcat.
For the purpose of this example i will build the fieldcatalog manualy
by populating the internal table fields individually and then
appending the rows. This method can be the most time consuming but can
also allow you more control of the final product.
Beware though, you need to ensure that all fields required are
populated. When using some of functionality available via ALV, such as
total. You may need to provide more information than if you were
simply displaying the result
I.e. Field type may be required in-order for
the 'TOTAL' function to work.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
fieldcatalog-do_sum = 'X'.
fieldcatalog-no_zero = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'EBELP'.
fieldcatalog-seltext_m = 'PO Item'.
fieldcatalog-col_pos = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'STATU'.
fieldcatalog-seltext_m = 'Status'.
fieldcatalog-col_pos = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'AEDAT'.
fieldcatalog-seltext_m = 'Item change date'.
fieldcatalog-col_pos = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material Number'.
fieldcatalog-col_pos = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MENGE'.
fieldcatalog-seltext_m = 'PO quantity'.
fieldcatalog-col_pos = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Order Unit'.
fieldcatalog-col_pos = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'NETPR'.
fieldcatalog-seltext_m = 'Net Price'.
fieldcatalog-col_pos = 7.
fieldcatalog-outputlen = 15.
fieldcatalog-datatype = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'PEINH'.
fieldcatalog-seltext_m = 'Price Unit'.
fieldcatalog-col_pos = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
Build layout for ALV grid report
form build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
gd_layout-totals_only = 'X'.
gd_layout-f2code = 'DISP'. "Sets fcode for when double
"click(press f2)
gd_layout-zebra = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text = 'helllllo'.
endform. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = gd_repid
i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
i_callback_user_command = 'USER_COMMAND'
i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
it_special_groups = gd_tabgroup
it_events = gt_events
is_print = gd_prntparams
i_save = 'X'
is_variant = z_template
tables
t_outtab = it_ekko
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
up to 10 rows
from ekpo
into table it_ekko.
endform. " DATA_RETRIEVAL
Form TOP-OF-PAGE *
ALV Report Header *
Form top-of-page.
*ALV Header declarations
data: t_header type slis_t_listheader,
wa_header type slis_listheader,
t_line like wa_header-info,
ld_lines type i,
ld_linesc(10) type c.
Title
wa_header-typ = 'H'.
wa_header-info = 'EKKO Table Report'.
append wa_header to t_header.
clear wa_header.
Date
wa_header-typ = 'S'.
wa_header-key = 'Date: '.
CONCATENATE sy-datum+6(2) '.'
sy-datum+4(2) '.'
sy-datum(4) INTO wa_header-info. "todays date
append wa_header to t_header.
clear: wa_header.
Total No. of Records Selected
describe table it_ekko lines ld_lines.
ld_linesc = ld_lines.
concatenate 'Total No. of Records Selected: ' ld_linesc
into t_line separated by space.
wa_header-typ = 'A'.
wa_header-info = t_line.
append wa_header to t_header.
clear: wa_header, t_line.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = t_header.
i_logo = 'Z_LOGO'.
endform.
FORM USER_COMMAND *
--> R_UCOMM *
--> RS_SELFIELD *
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
Check function code
CASE r_ucomm.
WHEN '&IC1'.
Check field clicked on within ALVgrid report
IF rs_selfield-fieldname = 'EBELN'.
Read data table, using index of row user clicked on
READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
Set parameter ID for transaction screen field
SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
Sxecute transaction ME23N, and skip initial data entry screen
CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
ENDIF.
ENDCASE.
ENDFORM.
*& Form BUILD_EVENTS
Build events table
form build_events.
data: ls_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = gt_events[].
read table gt_events with key name = slis_ev_end_of_page
into ls_event.
if sy-subrc = 0.
move 'END_OF_PAGE' to ls_event-form.
append ls_event to gt_events.
endif.
read table gt_events with key name = slis_ev_end_of_list
into ls_event.
if sy-subrc = 0.
move 'END_OF_LIST' to ls_event-form.
append ls_event to gt_events.
endif.
endform. " BUILD_EVENTS
*& Form BUILD_PRINT_PARAMS
Setup print parameters
form build_print_params.
gd_prntparams-reserve_lines = '3'. "Lines reserved for footer
gd_prntparams-no_coverpage = 'X'.
endform. " BUILD_PRINT_PARAMS
*& Form END_OF_PAGE
form END_OF_PAGE.
data: listwidth type i,
ld_pagepos(10) type c,
ld_page(10) type c.
write: sy-uline(50).
skip.
write:/40 'Page:', sy-pagno .
endform.
*& Form END_OF_LIST
form END_OF_LIST.
data: listwidth type i,
ld_pagepos(10) type c,
ld_page(10) type c.
skip.
write:/40 'Page:', sy-pagno .
endform.
hope it will help you
regards
sreelatha gullapalli -
Title above ALV grid is having more than 70 chars.
Hi friends ,
I have a requirement in which title above ALV grid is having more than 70 chars.
But the layout structure of ALV (slis_layout_alv) is having a component called wiindow_title which is having maximum length of 70 chars. How to show the text having more than 70 chars over here ?Hello Abhijit,
Its not possible to display more than 70 characters in ALV Title. May be you can try using Top of page and ALV list commentary write.
Regards,
Karthik D -
How to get f4 help in alv grid in container-urgent
hi,
how to get f4 help in alv grid in container using abap objects
ganeshHi Ganesh,
Did you have a look at sample report BCALV_TEST_GRID_F4_HELP ?
Here is part of the header documentation:
*& Report BCALV_GRID_F4_HELP *
Purpose:
~~~~~~~~
This report illustrates the use of f4-Help in an alv grid control.
Background:
~~~~~~~~~~~
There a two possibilities to implement an f4-Help in the alv grid
control: one can either use standard f4-help or write one by Hand.
For the former there is nothing to do at all. This report shows how
to implement user-defined f4-help.
I am sure you will find within this report the solution you are looking for.
Reward points if this Helps.
Manish -
How to trigger left_click_run event on ALV GRID
Hiiiiiiii........
Can any of u please tell me how to trigger left_click_run event on ALV GRID.
There is an event LEFT_CLICK_RUN and its a public accessed event. But the problem is , the corresponding attribute of this event "EVENT_LEFT_CLICK_RUN" which is needed to registered that event (We need to register our events through a method set_register_events using table of type cntl_simple_events...) is protect accessed. So I am unable to use that attribute...Could u please tell me is there any alternative way to register that event.......ANY POSSIBLE WAY?
Thanks in advance,
RamsI think you should use event selection_changed. Note that you shouldn't allow multiple selection for the tree at the same time, i.e. use: create object g_tree exporting \[...\] node_selection_mode = cl_gui_column_tree=>node_sel_mode_single.
For more information, see this thread: Urgently required : cl_gui_alv_tree single_click event... -
Selecting a row in the output of alv grid
hi,
how do i select a row in the output of alv grid?plz help...
regards,
sheeba.Hi,
Please refer the code below:
*& Report ZDEMO_ALVGRID_SELROW *
*& Example of a simple ALV Grid Report *
*& The basic ALV grid, Enhanced to display capture each row a user has *
*& selected *
REPORT zdemo_alvgrid_selrow .
TABLES: ekko.
type-pools: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
SEl, "stores which row user has selected
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
gd_tab_group type slis_t_sp_group_alv,
gd_layout type slis_layout_alv,
gd_repid like sy-repid.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform display_alv_report.
*& Form BUILD_FIELDCATALOG
* Build Fieldcatalog for ALV Report
form build_fieldcatalog.
* There are a number of ways to create a fieldcat.
* For the purpose of this example i will build the fieldcatalog manualy
* by populating the internal table fields individually and then
* appending the rows. This method can be the most time consuming but can
* also allow you more control of the final product.
* Beware though, you need to ensure that all fields required are
* populated. When using some of functionality available via ALV, such as
* total. You may need to provide more information than if you were
* simply displaying the result
* I.e. Field type may be required in-order for
* the 'TOTAL' function to work.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
* fieldcatalog-do_sum = 'X'.
* fieldcatalog-no_zero = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'EBELP'.
fieldcatalog-seltext_m = 'PO Item'.
fieldcatalog-col_pos = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'STATU'.
fieldcatalog-seltext_m = 'Status'.
fieldcatalog-col_pos = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'AEDAT'.
fieldcatalog-seltext_m = 'Item change date'.
fieldcatalog-col_pos = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material Number'.
fieldcatalog-col_pos = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MENGE'.
fieldcatalog-seltext_m = 'PO quantity'.
fieldcatalog-col_pos = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Order Unit'.
fieldcatalog-col_pos = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'NETPR'.
fieldcatalog-seltext_m = 'Net Price'.
fieldcatalog-col_pos = 7.
fieldcatalog-outputlen = 15.
fieldcatalog-do_sum = 'X'. "Display column total
fieldcatalog-datatype = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'PEINH'.
fieldcatalog-seltext_m = 'Price Unit'.
fieldcatalog-col_pos = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
* Build layout for ALV grid report
form build_layout.
gd_layout-box_fieldname = 'SEL'.
"set field name to store row selection
gd_layout-edit = 'X'. "makes whole ALV table editable
gd_layout-zebra = 'X'.
endform. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
* Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = gd_repid
* i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
i_callback_user_command = 'USER_COMMAND'
* i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
* it_special_groups = gd_tabgroup
* IT_EVENTS = GT_XEVENTS
i_save = 'X'
* is_variant = z_template
tables
t_outtab = it_ekko
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
* Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
up to 10 rows
from ekpo
into corresponding fields of table it_ekko.
endform. " DATA_RETRIEVAL
* FORM USER_COMMAND *
* --> R_UCOMM *
* --> RS_SELFIELD *
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
* Check function code
CASE r_ucomm.
WHEN '&IC1'.
* Check field clicked on within ALVgrid report
IF rs_selfield-fieldname = 'EBELN'.
* Read data table, using index of row user clicked on
READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
* Set parameter ID for transaction screen field
SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
* Sxecute transaction ME23N, and skip initial data entry screen
CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
ENDIF.
WHEN '&DATA_SAVE'. "user presses SAVE
loop at it_ekko into wa_ekko.
if wa_ekko-sel EQ 'X'.
* Process records that have been selected
endif.
endloop.
ENDCASE.
ENDFORM.
Thanks,
Sriram Ponna. -
Problem in placing the background in ALV Grid display
I have created one image of the business flow, and it have to be displayed in the background of ALV grid display.
For this I have gone to T.Code <b>OAER</b> , Given class name as <b>PICTURES</b> , Class type as <b>OT</b> , Object Key <b>BACKGROUND</b>, clicked on the triangle of Standard Doc , then double click on screen, and finally uploaded the background into SAP.
In the function module <b>REUSE_ALV_GRID_DISPLAY</b> I passed this background to the parameter I_BACKGROUND_ID.
It is working fine, and I was able to see the back ground in my program.
(developed in IDES)
But the same is not working in my development client, will some one suggest be the reason for the problem. Please kindly help me out from this problem.hello Dinesh,
I have created the object key in the development client itself and used in the grid display of the same client. i am not understanding where the problem is, any how thank you very much for your responce. if you have any other solution please let me know.
Thank you -
Wan to add push button in the output of ALV Grid display.
Hi Friends,
I wan to add a Push button in the output of ALV GRID display with STANDARD ikons.
How to copy standard ikons of GRID output.
How to apply the copied status into my code.
Regards,
VijiHi,
Goto SE41, create a pf-status for your alv report program.
On the next screen, click menu EXTRAS --> click option ADJUST TEMPLATES and select radiobutton LIST VIEWER --> you will get all standard buttons of alv in the pf-status.
Delete the unwanted buttons and also you can add new buttons if reqd.
Activate pf-status --> and apply in alv program.
Now to apply this pf-status in your alv report follow code:-
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = v_rep_id " report id
i_callback_pf_status_set = 'PF' " for PF-STATUS
i_callback_user_command = 'USER_COMMAND' " for User-Command
is_layout = wa_layout " for layout
it_fieldcat = it_field " field catalog
it_sort = it_sort " sort info
TABLES
t_outtab = it_final " internal table
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*& Form pf
* SUB-ROUTINE PF IS USED TO SET THE PF-STATUS OF THE SCREEN
* ON WHICH THE ALV GRID IS DISPLAYED
* -->RT_EXTAB
FORM pf USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZTG_STAT'. "<--pass pf-status name here
ENDFORM. "pf
*& Form USER_COMMAND
* SUB-ROUTINE USER_COMMAND IS USED TO HANDLE THE USER ACTION
* AND EXECUTE THE APPROPIATE CODE
* -->LV_OKCODE used to capture the function code
* of the user-defined push-buttons
* -->L_SELFIELD text
FORM user_command USING lv_okcode LIKE sy-ucomm l_selfield TYPE slis_selfield.
* assign the function code to variable v_okcode
lv_okcode = sy-ucomm.
* handle the code execution based on the function code encountered
CASE lv_okcode.
WHEN '<function_code>'. "<--to handle user actions
ENDCASE.
ENDFORM. "USER_COMMAND
Hope this helps you.
Regards,
Tarun -
How can I call functionality of ALV Grid by event of button outside grid?
Hello,
How can I call functionality of ALV Grid by event of button located outside ALV Grid? For example how to fire printing of this ALV Grid by button click elsewhere on the screen (not in toolbar of ALV Grid).
Best regards,
Josef Motlhi Motl,
these are steps to create a button in ALV and trigger an event from it..
1.Use the parameter i_callback_pf_status_set in the function module REUSE_ALV_GRID_DISPLAY
i_callback_program = gd_repid
i_callback_pf_status_set = 'SET_PF_STATUS'
form set_pf_status using rt_extab type slis_t_extab.
set pf-status 'NEWALVSTATUS'.
endform.
You have to copy the standard ALV pf stauts to 'NEWALVSTATUS' and add your button.
2.You have to do the following to process the new button click.
i_callback_user_command = 'USER_COMMAND'
form user_command using i_ucomm like sy-ucomm
is_selfield type slis_selfield.
case i_ucomm.
3. to copy the standard pf status to a new one.go to the ALV screen and take the menu System -> Status. Then look for the standard pf status. Copy this to Z range and then add your new button.
reward points if helpful
regards
satesh -
How to color the text elements in script?
how to color the text elements in script?
byeeeee
plz send the answersHi,
Please go through my blog to know how to do color printing in SAP scripts.
White Paper on 'Color Printing in SAP Scripts'
Regards,
Sireesha Ch -
How to display the fields in ALV Output without using Field catalog?
How to display the fields in ALV Output without using Field catalog?
Could you pls tell me the coding?
Akshitha.Hi,
u mean without building field catalog. is it? I that case, we can use the FM REUSE_ALV_FIELDCATALOG_MERGE.
data: itab type table of mara.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_structure_name = itab
CHANGING
ct_fieldcat = lt_fieldcat[]
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
*Pass that field catalog into the fillowing FM
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = gd_repid
i_grid_title = 'REPORTING'
is_layout = gt_layout
it_fieldcat = lt_fieldcat[]
tables
t_outtab = itab.
Maybe you are looking for
-
Photoshop Elements 4 available for purchase
http://www.adobe.com/products/photoshopelwin/main.html announcing Photoshop Elements 4 I just noticed it and will go read as soon as I finish typing this post. Barb O Message title was edited by: Brett N
-
Saving plain text on a mac (Keyboard shortcuts file)
Hi there perhaps some mac users can help me... I am manually editing the keyboard shortcuts file in TEXT edit on a mac (Im a pc user). I open the file as plain text all the rich text stuff turned off. (Looked up how to do this.) I edit one of the sh
-
MSS Problem in Employee Documents iview
Dear Folks, When I try to access MSS Employee Document iview I am getting the following message. "Item not found /alias/userhome/<user.id>/Personal Documents/EmployeeDocuments/00007917 The item you are attempting to access is not available. Check tha
-
Changed server name, lost all local folders
Greetings, Recently my hosting company migrated me to a new server. Thing is, not only is a new server, but also new name. This AM I figured I had to finally address the issue so I made what I've come to learn is a mistake - I went into Tools -> Acco
-
Securing Data Services-Webservice
I have the Data Services with Webservices mapping (.ws) defined and policies (auth/encrypt/sign/map) associated with the Service. Once this application is deployed I have created a webservice security (default_wss) with key pairs in key store generat