How to complete NC process by API

I have log the nc code to our SFC using NCProductionService,and can see it in NC Report,but I can not complete the process of LOG NC as NC500.How to complete it by API?
Thanks

I log the nc to my SFC,but how to complete the nc process by API?
Wait for you help,thanks

Similar Messages

My IPhone 4 is stuck at Step 3 (Preparing to Sync). Any ideas how to complete the process?

My IPhone 4 is stuck at Step 3 (Preparing to Sync).

You may want to take a piece of paper and carefully slide it into an open slit by the power button. Be very careful since you don't want anything stuck in there.
You can always contact Apple for a replacement.

How to provide transition comment while completing a process step

Out of the box, we can indicate transition comment for participant steps when completing a inbox item, which is then displayed as a subheading of a inbox item for next step - which is really helpful.
but, how can i provide a transition comment, when completing a process step.
I see the complete method, but dont see where i can provide transition comment.
complete(WorkItem item, Route route)
Environment CQ 5.5

Its workitem metadata which holds the comments info. Can you try this if it works
workitem.getWorkflowData().getMetaData(); which will return the dictionary object and set "comment" in this object.

I am syncing my iPhone now, and step 6 of 6 is taking significantly longer than it usually does. Is there a way to tell how long it will take, or complete the process?

I am syncing my iPhone now, and step 6 of 6 is taking significantly longer than it usually does. Is there a way to tell how long it will take, or complete the process?

Warp Stabilising is a two part process.
Analysis and Stabilising.
Both have a banner across the Program Monitor during the process ( unless you have turned that off.
Analysis start automatically on forst application...but you can rock in there and start adjusting the parameters.
You may need to hit "Analyse" Button again.
You should see the number of frames and the estimated duration during this process.

How to Notify if Process Chain DOES NOT complete?

How do I use Process Chains to notify me if the end process of a chain DOES NOT run by a certain time? Example: Chain starts at 6PM every night, always finishes by 7:30. If it doesn't complete by 8:00, I want to be notified. I can spawn an event on completion of the chain, but the 8PM job has to notify me ONLY IF this event is not active. How to do that?

Well you can make the ABAP process type send message
RSPC>from main menu Settings>Maintain process types
change mode -->select process type "ABAP" and change "possible events" to "Process ends successful or Incorrect" save it.
come out of process chain and goto the process chain maintenance again.
In regards to your question of 18 steps ,as i said you only need this ABAP process type once at the END of the Process chain to SET the flag status = X.
Another Process chain runs at 8.00 with only one process type ABAP process type to check the status in table if empty or X and send message accordingly,
Fyip - table RSPROCESSLOG and FM - RSPC_PROCESS_FINISH also available at your disposal to get some leads.
You can wait until some one has better solution and implemented it before,i just put my thoughts in to it,its not imperative for you.
I leave the thoughts with you.
Hope it Helps
Chetan
@CP..

How to invoke BPEL process from JAVA API

Hi Guys
Any idea if you can tell me how to invoke BPEL process from JAVA API ?
What to do in BPEL process manager to achieve that?
Regards
Deepak

See http://download-west.oracle.com/docs/cd/B31017_01/integrate.1013/b28981/invoke.htm#sthref1373 and the JavaDocs http://download-west.oracle.com/docs/cd/B31017_01/integrate.1013/b28986/toc.htm.

How to get the process instance key so as to retry a rejected task through api while ad provisoing?

Hi All,
How to get the process instance key so as to retry a rejected task through API while AD provisioing state?
API URL - http://docs.oracle.com/cd/E27559_01/apirefs.1112/e28159/toc.htm
Thanks

To retry a task that is in a rejected state, you use the SCH_KEY which is the task key. In OIM, all rejected tasks are listed in the OTI table. It contains all the important information about a rejected or pending task.
You can use the APIs found in the tcProvisioningOperationsIntf class to retrieve open tasks.
-Kevin

How complete is the javascript API?

Hi,
I am trying to serealize a AI document using the javascript API. Based on the "AI CC SCRIPTING REFERENCE" I assumed this could be done by simple traversing the dom and saving the type and properties of each object. It seems however that the API isn't complete. For example, I can't figure out how to read the transformation matrix of a symbolItem. (i.e. when creating a new symbolItem from a symbol and then resizing/rotating/repositioning it, how can I find these new properties?)
This is just one thing I ran into, that might be fixed using the C SDK. I am wondering however if this is worth the effort or more like filling a bucket full of holes? How complete is the javascript API?
Thanks,
Tom

the DOM in Illustrator is very limited, half the features are not exposed to scripting, SymbolItem Matrix is one of them.

IPhoto project will not upload even in safe mode when trying to buy book, any suggestions on how to complete the "BUY BOOK" process. Christmas gift, really need to get this done, have worked MANY hours on putting it together. Please help!

Iphoto book will not upload even in safe mode when trying to buy book, any suggestions on how to complete the "BUY BOOK" process?

Make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and apply the fix below:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #1, followed by #3 and then #4 as needed.
After each run thru the repair process see if you can create a PDF file of the book as described in this Apple Document: iPhoto '11: Preview a book, card, or calendar before you order or print it. If you can try ordering the book. If you can't finish trying all of the otpions and then boot into Safe mode and try there.
OT

Triggering a report after the completion of processing the session

Hi Friends,
I want to know how to trigger an report after the completion of processing the session.
Thanks,
Raj

Hi
        SELECTION-SCREEN                               *
PARAMETERS: p_name     LIKE apqi-groupid,
            p_datum    LIKE apqi-credate,
            p_time     LIKE apqi-cretime,
            p_event    LIKE tbtco-eventid.
             DATA                                     *
DATA: fl_job_ok TYPE c,
      fl_event TYPE c,
      cont_sysubrc_6 TYPE i.
DATA: start_time LIKE sy-uzeit,
      start_date LIKE sy-datum,
      time       LIKE sy-uzeit,
      delta_time TYPE i.
DATA: apqitab LIKE STANDARD TABLE OF apqi WITH HEADER LINE.
DATA:
btc_running       LIKE tbtco-status VALUE 'R',
btc_ready         LIKE tbtco-status VALUE 'Y',
btc_scheduled     LIKE tbtco-status VALUE 'P',
btc_released      LIKE tbtco-status VALUE 'S',
btc_aborted       LIKE tbtco-status VALUE 'A',
btc_finished      LIKE tbtco-status VALUE 'F',
btc_put_active    LIKE tbtco-status VALUE 'Z',
btc_unknown_state LIKE tbtco-status VALUE 'X'.
                     START-OF-SELECTION                              *
START-OF-SELECTION.
DATA: a VALUE '1', b.
Controllo esistenza job:
start_time = sy-uzeit.
start_date = sy-datum.
DO.
    apqitab-creator = sy-uname.
    CALL FUNCTION 'BDC_OBJECT_SELECT'
      EXPORTING
        name                   = p_name
        datatype               = 'BDC'
    CLIENT                 = SY-MANDT
        date_from              = p_datum
    DATE_TO                =
        time_from              = p_time
    TIME_TO                =
       QSTATE                 = 'F'
        session_creator        = apqitab-creator
      TABLES
        apqitab                = apqitab
      EXCEPTIONS
        invalid_datatype       = 1
        OTHERS                 = 2.
    IF sy-subrc <> 0.
      fl_job_ok = space.
    ELSE.
      LOOP AT apqitab.
        CASE apqitab-qstate.
          WHEN 'F'.          fl_job_ok = 'X'. EXIT.
          WHEN 'E'.          fl_job_ok = 'E'. EXIT.
          WHEN OTHERS.       fl_job_ok = space.
        ENDCASE.
      ENDLOOP.
      IF fl_job_ok = 'X' OR fl_job_ok = 'E'.
        EXIT.
      ENDIF.
    ENDIF.
    IF start_date <> sy-datum.
      start_time = sy-uzeit.
    ENDIF.
    time = sy-uzeit.
    delta_time = time - start_time.
    IF delta_time > 1800.
      EXIT.
    ENDIF.
    REFRESH apqitab.
ENDDO.
IF fl_job_ok = 'X'. " Trovato JOB
    fl_event = 'X'.
    IF fl_event = 'X'.
Attiva evento
      CALL FUNCTION 'BP_EVENT_RAISE'
        EXPORTING
          eventid                = p_event
        EXCEPTIONS
          bad_eventid            = 1
          eventid_does_not_exist = 2
          eventid_missing        = 3
          raise_failed           = 4
          OTHERS                 = 5.
      IF sy-subrc <> 0.
        MESSAGE e999(zfagm) WITH p_event 'is not actived'(002).
      ELSE.
        MESSAGE i999(zfagm) WITH p_event 'is successfully actived'(002).
      ENDIF.
    ELSE.
      MESSAGE e999(zfagm) WITH p_event 'is not actived'(002).
    ENDIF.
ELSE.
    IF fl_job_ok = space.
      MESSAGE e999(zfagm) WITH p_event 'is successfully actived'(002).
    ELSE.
      MESSAGE e999(zfagm) WITH p_event 'is successfully actived'(002).
    ENDIF.
ENDIF.
Max

Issue in invoking process order API from SOA

Hi All,
I am working on creating sales order in oracle Apps from Oracle SOA using Apps Adapter.
I have used OE_ORDER_PUB.Process order API to create the sales order.I am also sending the org_id,reponsibility,username properties in Invoke activity.
When I invoke the API ,I am getiing SQL Exception- invalid name pattern.
The error payload is as follows.
<fault>
<bpelFault>
<faultType>0</faultType>
<bindingFault>
<part name="summary">
<summary>Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'ESOA_SOprj' failed due to: Interaction processing error. Error while processing the execution of the APPS.XX_BPEL_ESOA_SOPRJ.OE_ORDER_PUB$PROCESS_ORDER API interaction. An error occurred while processing the interaction for invoking the APPS.XX_BPEL_ESOA_SOPRJ.OE_ORDER_PUB$PROCESS_ORDER API. *Cause: java.sql.SQLException: invalid name pattern: APPS.OE_ORDER_PUB_HEX54139X39X496 Check to ensure that the XML containing parameter data matches the parameter definitions in the XSD.* This exception is considered not retriable, likely due to a modelling mistake. To classify it as retriable instead add property nonRetriableErrorCodes with value "-17074" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. </summary>
</part>
<part name="detail">
<detail>invalid name pattern: APPS.OE_ORDER_PUB_HEX54139X39X496</detail>
</part>
<part name="code">
<code>17074</code>
</part>
</bindingFault>
</bpelFault>
</fault>
I also checked the oracle Apps database where there is no error in APPS.OE_ORDER_PUB_HEX54139X39X496 object.
Kindly give your suggestions.
regards,
Goutam

Did you get this to work?
I checked the
$INST_TOP/logs/ora/10.1.3/opmn/oafm_default_group_1/oafmstd.err file.
Found the oracle.tip.adapter.db.sp.AbstractStoredProcedure execute was
the next line was the
<::Outbound><oracle.tip.adapter.db.sp.AbstractStoredProcedure execute> Bindings [P_ORG_ID=>NUMBER(null), P_OPERATING_UNIT=>VARCHAR2(null), P_API_VERSION_NUMBER=>NUMBER(1.0), ... long log details of the bind parameters....
I search through to find the bindings which were P_HEADER_CUSTOMER_INFO_TBL=>APPS.OE_ORDER_PUB_CX54139X39X5692*(null)* but not allowable as null,
then check the original SOAP request and added the blank parameter:
<proc:P_HEADER_CUSTOMER_INFO_TBL></proc:P_HEADER_CUSTOMER_INFO_TBL>
So then it didn't come through "NULL" and the procedure got properly called.
Causing an error:
<::Outbound><oracle.tip.adapter.db.exceptions.DBExceptionHandler isRetriable> SQLState is 65000 (unknown) for java.sql.SQLException: ORA-06531: Reference to uninitialized collection
ORA-06512: at "APPS.ISG_OE_ORDER_PUB_PROCESS_ORDER", line 1
ORA-06512: at "APPS.ISG_OE_ORDER_PUB_PROCESS_ORDER", line 1
ORA-06512: at line 1
That's a nasty call parameter list and very easy to miss a parameter when cleaning up the SOAP XML request. That's how i did it. Hope this helps the next guy.

How to completely delete Photoshop Elements from my computer??

Hi
I am trying to completely remove Photoshop Elements from my computer.   So far, I have failed in my attempts to do this.   The reason I'm doing this is b/c for some reason that I can't fathom, the folders in My Pictures -- the folders named by shot date -- contain random duplicates.When this happens, the file names folow the convention of DSC_0222 and DSC_0222-1. Exactly the same file size and metadata. In some folders, every picture is duplicated. In other folders, only selected pitcures within the folder are duplicated.   I can't figure out how they got there -- e.g. it doesn't seem to bear any connection to the photos I've edited, which was one theory I had for a while.   Is Elements responsible? Or is this some sort of bug in the download process from the camera (I have a Nikon D40). Anyway, I've given up on trying to sovle this problem and decided I would go back to the beginning and reload everything from my camera.   So, my real question here is about how to completely uninstall Elements.
Here's what I did:    I uninstalled Photoshop Elements through the Add/remove programs utility. I got no errors during the uninstall process.   Then I completely deleted the My Pictures directory (don't worry -- I have it backed up in multiple places!!).   So, at this point there are *no* pictures on my computer at all.    I reinstall Elements, open it up and -- you guessed it!!! -- the catalog is still there with all the thumbnails of the pictures that i deleted from my hard disk.   Of course, each thumbnail is flagged as "Missing File".
So, how do I uninstall/reinstall Elements and get it to forget all memory of the previous catalog?   Why is it "remembering" it in this way when the pictures aren't even on the computer anymore? Isn't this a bug???
I've been working on this issue for much longer than I care to remember-- if anyone can tell me how to get myself truly back to ground-zero so I can start over I would be deeply grateful.   After upgrading to Elements 9 (from 7) to try to solve this problem I am close to just abandoning Elements entirely.....
WHile we're at it, if anyone has any idea where the duplicates pictures are coming from and how I prevent that from happening, I'm' all ears!!!!
Thanks!

Hi
Thanks so much for the response.   So, Help/System Info says that the catalog is here:
Catalog Location: C:\Documents and Settings\All Users\Application Data\Adobe\Elements Organizer\Catalogs\My Catalog\
but no such file appaers to exist. In fact, I can only get as far as All Users.   Then there is no directory under that called "Application Data".
i'm still seeing the thumbnails when I got into Elements tho'....   :-(
hjr

How to trigger a process task on IT Resource process form

Hi,
I want to know how to trigger a process task on IT resource process form using OIM API.For Example:- If a task ilike an e-mail is to be sent on the departure date of a user.So,how can it be done using API?
Thanks.

This would typically be done through a scheduled task. Write your code to query for the departure date. If someone meets your criteria for an action to occur, you can either use the addProcessTaskInstance which has an adapter attached to it to send the email, or in your code, send the email.
The details that need to be considered though is where the departure date is stored. Is it on a process form, or is it on the user's OIM profile. Do you want to disable the user or revoke the object instance at this departure date? You could use the notification tab of these existing tasks if so.
-Kevin

How to start the process.

I'm using CE 7.3 for BPM.
I would like to start process from simple menu not using Process Repository.
Does anyone know hot to start BPM process form menu ?
Do I have to develop webDynro applicatin that calls web-services for staring the process ?
Best regards,
Koji Nagai

Thank you for your reply.
I understand how to start BPM process by using BPM API.
But in my project, we need to minimize the developed objects.
To use BPM API means to develope programs right ?
If possible, I would to start BPM process without developing programs.
Is there any way to start BPM process from menu without add-on programs.
Best regards,
Koji Nagai

How to open GP process using url

Dear All,
Our requirement is to open a GP process from a url link. The url link will be sent to the user in an email.
When going through the GP API we found a function getProcessInstanceID(), but we are not able to figure out how to generate the url from the id so that the process with the particular instance opens up.
The user who will receive the url link, will have a portal id.
Could anyone please help us out?
Thanks and regards,
Mayuresh

hi
Hope this [link|http://help.sap.com/javadocs/NW04S/SPS09/gp/com/sap/caf/eu/gp/process/rt/api/IGPRuntimeManager.html] will be helpful for you
You can refer [here|Generating Report on currently running GP Processes; too.
Thanks
Gopal

How to complete NC process by API

Similar Messages

Maybe you are looking for