How to configure File Adapter along with OS command option

Hello,
I want to configure a scenario using File Adapter with OS command option.
How to use that option in channel configuration of File Adapter.
What is the default path where it is actually runs this OS command?
Thanks,
Soorya

>
surya venkat wrote:
> Hello,
> I want to configure a scenario using File Adapter with OS command option.
> How to use that option in channel configuration of File Adapter.
There are two ways to use the Os command in the file adapter.
Lets talk about the sender File Adapter.
First: Run operative system Before Message Processing
Whenever any operation needs to be performed uppon the source file Just before XI picks it up.
e.g. Calculate any hash code, backup the file to a given location, create a log at os level, etc...
... After Message Processing
After Xi has processed the message, you can trigger a new os level command:
e.g. Trigger a mail, check if the archiving was successful, etc.
> What is the default path where it is actually runs this OS command?
>
Theres no default path, you assign the desired path in the Comm Channel configuration.
> Thanks,
> Soorya
I hope it helps.

Similar Messages

How to configure File Adapter (Read)..?

Hi all,
While configuring the Read Adapter in BPEL 11g i am getting not reading any data from given location. But my location are correct.. So please how to configure File Read adapter and give any URL for this ... Thank you

Hi all,
The file adapter it consists many operations like
1: Read
2:Write
3:Synchronous Read
4:ListFiles
So you are asking about Read operation
First you take one File Adapter-->Select Read Operation--->Give Incomming file Location ( In local system you can give like C:/temp/NewDir Or Unix Envornment like you can give /temp/NewDir)
After that you can give file Name like wich format it's incomming file name like CSV.txt or CSV.xml after you give Polling Intervels second or Mintued or Hour.You can select Native format or Define service Later once configure all those things the file adapter configration is done . If you have any doubts in file configrigation please go for the below link...........
http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10231/adptr_file.htm#TKADP322

How to use File Adapter with hierarchial Structure?

Hi,
How to use File Adapter with hierarchial Structure like..
Data:
--Header Details:
Line Item Details:
Data
Bcoz I am getting a Flatfile in a hierarchial way as shown below.
Header Details :1
Line Item a
Line Item b
Header Details :2
Line Item c
Line Item d
Kishore

Hey Kishore,
In order to create a structure you need to use the file with convertion mode on the sending communication channel of the file adapter.
check the link for the needed configuration paramters.
If the structure is more complexed you can use the Contetnt master(CM) from itemfield which allows to ceate XML file from complex flat files and more.
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm">File sender adapter</a>
If you have any question i'll be more than happy to assist.
Nimrod Gisis

How to modify the contents of a text file stored along with a midlet

Hi,
I have been developing a application in j2me wherein i need to first read the contents of the text file stored along with the midlet and later erase the existing content and update it with some text.
I was able to read the file in the following manner
InputStream is = getClass().getResourceAsStream("myfile.txt");
Now i need to erase the contents and then update it the new content, how do i do it. Kinldy please help me out. It is very urgent.
Thanks

Didn't you hear me the first time?
http://forum.java.sun.com/thread.jspa?threadID=701360&messageID=4068435#4068435

How to configure SFTP Adapter in XI?

Hi All,
How to configure SFTP adapter in XI?, It would be great if anyone sends a step-by-step documentation on the same.
Thanks in advance

Hi,
About SFTP .
1) SFTP (Secure File Transfer Protocol)
"SSH File Transfer Protocol" or SFTP is a network protocol that provides file transfer and manipulation functionality over any reliable data stream. It is typically used with the SSH-2 protocol to provide secure file transfer. SFTP encrypts the session, preventing the casual detection of username, password or anything that is being transmitted. One key benefit to SFTP is its ability to handle multiple secure file transfers over a single encrypted pipe. By using a single encrypted pipe, there are fewer holes in the corporate firewall.
SFTP:
As per the latest SAP PI/XI support pack, it does not support SFTP via File Adapter.
So alternative approach to cater this requirement from XI is to make use of Unix Script at OS level to transfer the files from/to third-party systems.
Inbound Interface - i.e. third-party system ->XI->SAP:
File is transferred to a folder in SAP XI landscape from the third-party legacy system using UNIX Script with secured protocol. Once the file is ready in the XI landscape, File Adapter will poll this directory and file is picked up by NFS protocol.
Outbound Interface i.e. SAP->XI->third-party system:
XI is responsible for writing a file into a folder in the XI landscape. These files are transferred to the third-party system by executing UNIX scripts with secured protocol i.e. via sFTP.
Pre-Requisites:
Public key should be exchanged between external systems and the PI system.
UNIX shell script has to be developed and scheduled.
Advantages:
Highly Secured.
Ability to handle multiple secure file transfers over a single encrypted pipe .By using a single encrypted pipe, there are fewer holes in the corporate firewall.
Disadvantages:
Two-Step process i.e. XI>Temporary folder>External System and vice-versa
Files have to be temporarily stored in XI server.
Multiple failure points i.e. XI and Unix script execution
Maintenance of an external UNIX script.
Difficulty in monitoring the execution of the shell script as it cannot be monitored thru XI.
Need to generate keys and install it in the SFTP site as a pre-requisite i.e. SFTP clients must install keys on the server.
SFTP uses keys rather than certificates. This means that it can't take advantage of the "chains of trust" paradigm facilitated through Certificate Authorities.
Files from the XI server should be deleted/archived in a periodic manner to increase the disc space so that it will increase the performance.
Note: UNIX shell Script can be executed as a background job or' can be triggered from SAP XI through OS command at File adapter level.
Check the links.
Secure FTP (SSH) with the FTP Adapter
Secured File Transfer using SAP XI
Secure FTP in SAP XI
Regards,
Phani
Reward points if Helpful

How to configure Seeburger adapter

Hi All,
Can you pls guide me on how to configure adapter? and also why do we need mercerator and converstion agent tools along with see burger adapter?
Can't find any doc on how to configure seeburger adapter!!!
Can someone pls put light on the messageflow when seeburger and these converstion agents are used?
Regards,
Ashish

Hi Ashish,
It is similar like other adapters once it is supplied. But take care about security/firewalls settings.
and also why do we need mercerator and converstion agent tools along with see burger adapter?
>>>Not a mandatory to use along with seeburger.
Can someone pls put light on the messageflow when seeburger and these converstion agents are used?Can't find any doc on how to configure seeburger adapter!!!
>>>Seeburger EDI Adapter provides an EDI solution on internet via HTTP or AS2 to replace the expensive VAN. It provides some pre-built mappings for IDOC to ANSI X12(810,850,855,856 etc.,) and Idoc to EDIFACT(ORDERS,DESADV,INVOIC etc.,) and has the ability to build your own. These pre-defined mappings transform the IDOC-XML to EDI-XML format.
These transformed EDI-XML messages are then converted to EDI specific format using the Seeburger's BIC(Business Integration Converter)adapter. In addition, Seeburger provides adapters like AS2,FTP(EDI specific) and so on to route these EDI messages to external EDI Partners.
Seeburger EDI Adapter leverages SAP XI's Adapter Framework. This Adapter is used to perform conversion between EDI and XML format. It also provides some canned EDI layouts and the ability to build your own. It is used to transfer the EDI message via HTTP or AS2 protocols.
The most direct way of using the Seeburger adapters is to configure the BIC as a module. There is a software component from seeburger called bicmapper which will allow you to do the following:
1. define or import the inbound message metadefinition in various formats ( edifact, xml,...)
2. using a mapping create an xml variant as the output metadefinition or edifact in the other direction.
3. create a one to one mapping between input en output.
4. export the metadata in xsd or sda format for import in XI
5. generate an SDA which can be deployed in XI and used as a module.
Please go through the following links which clearly explains what you want and it also helps you in understanding the same in depth:
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
Thanks
Sreeram

How to configure Ogone for working with business catalyst ?

How to configure Ogone for working with business catalyst ?
In france ogone seems to be the only solution for seamless payment and there's no explications on the forum to configure it.
Thx for your answers

Hi ,
[Configuration Guide SAP adapter for SAP Quality Center by HP|https://websmp101.sap-ag.de/~sapdownload/011000358700000612662007E/Adapter_Configuration_.pdf] might be useful.
Check [Master guide|https://websmp201.sap-ag.de/~sapdownload/011000358700000612672007E/Adapter_Master_Guide.pdf] also.
Regards
Naveen
Edited by: Naveen kumar Palanichamy on Feb 19, 2009 6:38 AM

How to Configure a mail server with OIM

Experts ,
Any idea/links/Docs on how to configure a mail server with OIM and to send mail notification to someone .
Pardon me, if my questions seems to be incomplete .
Thanks
Suren

.Create an IT Resource of Type Mail Server. Give Name as "Email Server.Now populate the values for all the parameter for example Server,username,password and authentication type.
.Go to System Configuration and in Email Server property value give the name of IT resource you created in step1 so the name will be "Email Server".
http://forums.oracle.com/forums/messageview.jspa?messageID=3867506&stqc=true

How to use File Adapter in BPEL

Hi,
How to use File Adapter in BPEL. I am using Oracle SOA 10g. Any sample or best example in blog or elsewhere ?

Hi,
Please check the below links for samples on how to use file adapter in BPEL (in 10g/11g usage is same) and let me know any further queries.
11g - http://blogs.oracle.com/theshortenspot/entry/soa_suite_integration_part_3_l
10g - http://erpschools.com/articles/bpel-file-adapter-tutorial

How to configure the wifi access with specific time slot for kids?

how to configure the wifi access with specific time slot for kids?

Which model of AirPort base station do you have? Which version of OS X is your MacBook Pro running?
Wi-Fi access can be limited using the Timed Access feature of the AirPort routers. You would do so using the AirPort Utility.

How load swf file (flash 8) with adobe captivate 3 without enter the HTML?

How load swf file (flash 8) with adobe captivate 3 without enter the HTML?

Hi SaSQuaCh69247,
Issue 1 :- Select the SWF file in library, right click, and
select update.
Issue 2 :- Actually it could be valid for Issue 1 also. It
seems like SWF file you are trying to import, does some action
like, importing another swf or connecting to server on the first
frame itself. Captivate will try to play the first frame of SWF
when you import them. Try creating a keyframe with the stop action
as the first frame in your SWF, and see if you still have the
issue.
Issue 3 :- The approach I am mentioning over here is
generally the last approach which I will take in such scenerios,
but since you have already experimented a little, so try this.
Go to C:\Documents and Settings\<user name>\Application
Data\Adobe\Adobe Captivate
Rename captivate_v20.dat as captivate_v20_org.dat.
Restart Captivate Application.
thanks

How to configure JDBC Adapter(Sender & Receiver)

How to configure JDBC Adapter(Sender & Receiver)
Rgds
Ruchitha

Hi ruchitha thakur ,
These r the following web-sites which give u detailed information about configuring of JDBC Adapter(Sender & Receiver)
JDBC is a technical Adapter provided by SAP.
Configuring the Sender JDBC Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/1d/756b3c0d592c7fe10000000a11405a/content.htm
Configuring the Receiver JDBC Adapter
http://help.sap.com/saphelp_nw2004s/helpdata/en/b0/676b3c255b1475e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6d36d51d-0b01-0010-b3aa-9cb313b63cf4
SAP XI Utilize SAP Adapters to connect to heterogenous systems
https://wwwn.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3fc4bd90-0201-0010-68bd-ab931b06f9c2
cheers!
gyanaraj
***Pls reward points if u find this useful

How to configure Exchange 2013 OWA with Single Sign On

Hi All ,
How to configure Exchange 2013 OWA with Single Sign On ?
Thanks .

Hi,
From your description, I am not quite sure what you really want to achieve. Could you explain it furthermore? If you need to set up Exchange 2013 OWA single sign on with Exchange 2010, here is a helpful thread for your reference.
Exchange 2013 OWA Single Sign on with Exchange 2010
https://social.technet.microsoft.com/Forums/en-US/2899ebfc-8622-4cdc-8d77-d76b607618f7/exchange-2013-owa-single-sign-on-with-exchange-2010?forum=exchangesvrdeploy
If that is not your case, please feel free to tell me.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Change status(Active/Inactive) of file adapter by the external command

Hi, all.
Is it possible to change status(Active/Inactive) of file adapter by the external command?
Let's say, like
"$ switch_file_adapter_status.sh <File Adapter name> <active|inactive>"
or something like that.
Actually, we have the following requirement for the file adapter.
For example, we have many "file adapter to R/3" scenarios and we only want to allow data transfer between 9:00 a.m. to 9:00 p.m.(R/3 service time).
In order to achieve this requirement, one option would be to switch file adapter status between active and inactive by external command line.
And this command will be controlled by the job scheduler(like Tivoli).
Does XI(3.0 or above) have this kind of feature?
Best Regards.

Hi,
I don't think that this is possible.
But one Solution for your problem could be a job on xi who execute the Queue.
So that Adapter work the hole time and send the Message to XI Queue which process them not automatically.
And the XI Queue you can trigger with a Job like normal R/3 Jobs.
Hope that helps,
Regards,
Robin

Can you pass a hidden value along with your select option in the form selec

Can you pass a hidden value along with your select option in the html form select

Off topic. Locking.

How to configure File Adapter along with OS command option

Similar Messages

Maybe you are looking for