How to configure Oracle database in a failover zone cluster
Setup: Oracle database and zone configured on highly available local filesystems.
Two node cluster.
Oracle database running inside the zone.
Note: I dont have a zone cluster.
1. I need to make the zone and the oracle database highly available.
2. Can I configure the Oracle Data service directly to run in the zone or will it involve creating sczsh_config script to do the same.
I have been going through the guides and searching over the net, but haven't found any help so far. Its so much simpler to configure this environment in Veritas cluster. Hope I find some help here.
TIA,
Sudhir
The Oracle Solaris Cluster concepts guide has some information on which zone model to choose:
http://docs.oracle.com/cd/E18728_01/html/821-2682/gcbkf.html#scrolltoc
When managing a Solaris zone with the HA Zones agent, the cluster basically regards the non-global zone as a blackbox.
As such you can either start the Oracle database as part of the runlevel/SMF startup of the non-global zone, or you can use the sczsh or sczsmf component and use your own scripts to start, probe and stop the Oracle database.
Usage of the standard HA Oracle data service is not supported in combination with the HA Zones agent.
If you require a more fine grained control of services running in non-global zones, why not setup a zone cluster and then having HA Oracle failover the Oracle database between non-global zones?
Regards
Thorsten
Similar Messages
-
How to configure oracle database in Hyperion Planning 11.1.2
Hi,
I need to set up Oracle database in Hyperion planning and what are pre-requisite for this.
Kindly specify configuration details - about Table space, Schema, Users.
Kindly advise me on this.
Thanks,Have a read of
http://download.oracle.com/docs/cd/E17236_01/epm.1112/epm_install_start_here_11121.pdf
Section "Using an Oracle Database"
Cheers
John
http://john-goodwin.blogspot.com/ -
How to configure Oracle Enterprise Manager for ASM RAC Database ?
Dears,,
We have two databases (Primary & Standby), each database has two instances
Database version: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit
How to configure Oracle Enterprise Manager for this environment ?
I need documentation for this please.
Many thanks & Regards,,Assuming an agent is running on the servers you want to monitor,
navigate to the Agent home page (Via setup --> Agent)
When in the agent home page select 'Add Database'and press [Go]
Assuming yopur database now gets recognized, select the Configure icon and enter the password for dbsnmp.
When done, press [Ok] to return to the agent home page.
Regards
Rob
http://oemgc.wordpress.com -
How to configure standby database in a single machine
I am in Windows XP professional and oracle 9i . I want to configure a standby database for a database called proddb in the same machine. For doing this, I created a standby controlfile. But this work for the same name standby database?. How this happen ? two database with same name possible? How to create the second database (Standby) Please help?
ShijuThe Oracle Solaris Cluster concepts guide has some information on which zone model to choose:
http://docs.oracle.com/cd/E18728_01/html/821-2682/gcbkf.html#scrolltoc
When managing a Solaris zone with the HA Zones agent, the cluster basically regards the non-global zone as a blackbox.
As such you can either start the Oracle database as part of the runlevel/SMF startup of the non-global zone, or you can use the sczsh or sczsmf component and use your own scripts to start, probe and stop the Oracle database.
Usage of the standard HA Oracle data service is not supported in combination with the HA Zones agent.
If you require a more fine grained control of services running in non-global zones, why not setup a zone cluster and then having HA Oracle failover the Oracle database between non-global zones?
Regards
Thorsten -
How to configure oracle 9i server
Hi,
I am a newbie to oracle. I need to configure oracle server for studying PL/SQL. I have SQL*Plus: Release 9.0.1.0.1 in it. I need a username and password on my localhost to login to it. I dont know how to run Oracle Database Server for it and how to create an user account. Could someone direct me how to do it? I just need to login to SQL Plus and study it.Do yourself a favor and deinstall 9i. It is obsolete and currently in desupport.
If your intent is to learn Oracle then download 11g and use it instead.
Then go to Morgan's Library at www.psoug.org and you can use the index to find demos you can use to learn all basic functionality.
Feel free to contact me off-line if you have questions about the library. -
How to configure Oracle 10g Advanced Security to use SSL concurrently with
How to configure Oracle 10g Advanced Security to use SSL concurrently with database User names and passwords
In Oracle Advanced Security Documentation it is mentioned that i can use SSL concurrently with DB user names and passwords. But when i configure the client certificate on the client my DB connection is getting authenticated using the certificate, which out passing user id or password.
We want to connect to Oracle DB over SSL channel so that the data packets are not in clear text. Also we want the user to make a connection using user id and password.
Basically we want SSL with out authentication.
Need your expert adviceRead the documentation (I have given following links assuming you are running a 32 bit architecture)
Server installations:
http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb14316%2Ftoc.htm&remark=portal+%28Books%29
Client installations:
http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb14312%2Ftoc.htm&remark=portal+%28Books%29
You can find the required books (if not using 32 bit architecture) from
http://www.oracle.com/pls/db102/portal.portal_db?selected=3 -
How to configure Oracle Enterprise manager 11.2.0.1 for ASM instance
Hi All,
Please let us know How to configure Oracle Enterprise manager 11.2.0.1 for ASM instance.
Reagrds,
VikasAssuming an agent is running on the servers you want to monitor,
navigate to the Agent home page (Via setup --> Agent)
When in the agent home page select 'Add Database'and press [Go]
Assuming yopur database now gets recognized, select the Configure icon and enter the password for dbsnmp.
When done, press [Ok] to return to the agent home page.
Regards
Rob
http://oemgc.wordpress.com -
How to configure multiple databases in single listener
Hi,
I want to configure upto 8 standby databases in a server. But I do not know how to configure multiple databases within the listener.
Also can I use the same port number for all the databases.
please give your suggestions.
thankyou
satyanagPlease check (http://download.oracle.com/docs/cd/B10501_01/network.920/a96580/toc.htm)
Jonathan Ferreira
http://oracle4dbas.blogspot.com -
How to connect oracle database from tuxedo
Hi,
How to connect oracle database from tuxedo.
If any one can help me.
Regards,it depends on configuration your going to choose, there are two ways--
- Using X/Open standards, for this
you have to make an entry of Resource manager in $TUXDIR/udataobj/RM file.
Then in UBBConfig file in GROUPS section u have to set Openinfo.
It also depend on which database you are going to use.
In your service now you need to call tpopen() API from tpsvrinit() function.
- Other possibility is, take an implicit connection using Pro*C or Pro*Cobol whatever platform you are using.
EXEC SQL Connect ... -
How to connect oracle database into VC?GIve step by step.
Hi Experts,
Please help
How to connect oracle database into VC?
I need step by step.
what shall i do the first to connect via jdbc or something else.
whether we have to create dsn name or using jdbc connections?which one to use?
Please give the basic steps.Its very urgent.
Thanks and Regards,
NutanHi ,
all information are in the following document:
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6209b52e-0401-0010-6a9f-d40ec3a09424">How to Configure a Business Intelligence JDBC System for Visual Composer</a>
Rgds,
Karim -
Owb92 demo: How to configure workflow database link?
Hi,
I follow the doc for owb92 demo, but got error while deploying the wh_proc_loc. The error is as follows. How do configure workflow database link on owb? Thanks.
RPE-02085: Failed to test wb_rti_workflow_util.initialize through deployed Workflow Database Link ORCL.US.ORACLE.COM@WB_LK_LD_OLAP. Please check that "EXECUTE ANY PROCEDURE" privilege is set and that the OWB Runtime is available.
- ORA-06550: line 1, column 7:
PLS-00201: identifier '[email protected]@WB_LK_LD_OLAP' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignoredHave you checked whether none of the specified errors applies?
- The user needs the "EXECUTE ANY PROCEDURE" privilege
- OWB Runtime available, this could mean several things:
......* runtime repository unavailable (as in not installed?... unlikely)
......* runtime platform service unavailable --> try running service_doctor.sql in directory <your OWB home>\owb\rtp\sql\
Good luck, Patrick -
How to configure Oracle SSO for OBIEE
Hi all
Can anyone help me saying how to configure Oracle Single Sign-on with OBIEE?
Basically I want to enable a common login for Dashboard and answers using SSO.
I am using OBIEE 10.1.3.4 on a Redhat Linux
thanks in advanceHi...
See this, hope this what you want...??
If not .. ignore...
Thanks & Regards
Kishore Guggilla -
How to configure oracle thin drivers for SUN APPLICATION SERVER
hi all,
I am working with EJB with oracle as back-end. I wants to know how to configure oracle thin drivers for the SUN APPLICATION SERVER. Please explain me breifly.
Advanced thanks to all the replies.
with regards,
/kumaraswamy.nKumaraswamy,
Did you try searching the Internet? Here are the results of my Internet search:
http://tinyurl.com/zo4gk
And one of the first hits in the list was this:
Deploying to a Sun Java System Application Server
Good Luck,
Avi. -
How to configure Oracle 10g RAC on windown sever 2003
hi all
plz tell me
how to configure Oracle 10g RAC on windown sever 2003 can any body help me , give be any link
plz it is very necessary for me
RegardsHello,
There are a good doc written by Philip Newlan at www.jobcestbon.com/oracle/RacOnWindows.pdf
Regards,
Rodrigo Mufalani
http://mufalani.blogspot.com -
How to configure Oracle jsp engine on OAS4.0.8.1
1. How to configure Oracle jsp engine on OAS4.0.8.1 for linux
2. How to set the parameter on OAS. The Ojsp document only give examples depict the syntax used when running in an Apache/JServ 1.0 environmentAnyone?
Maybe you are looking for
-
Report : How to show all the reports in Content Management
Hi, Can anyone tell me how I can show the "Resource Locks" Report in Portal. I can see 4 reports through Content Management -> Reports i.e. Approval Maintenance, Link Consistency, Resource Statistics, Time-based publishing. If I want to add more
-
How do I make my already existing check boxes on a (PDF Document) checkable - So I can check and uncheck them on PDF Expert or Annotate 101. I am using ADOBE Acrobat PRO with millions of options, but no easy "here is how to do the one thing you want
-
Hi , I have been facing following issue since some days of "A login timeout occured while connecting to the database". Although this is not occuring daily in scheduled executions but its been there say 2-3 days apart. Error given is as ODI-1228: Tas
-
Cannot create DataSource, Exception in Tomcat 4.1
I am running into a major problem with Tomcat4.1 trying to access a Datasource. I referenced about 7 articles one of which has the subject "Cannot create JDBC driver of class '' for connect URL 'null', cause..." but he is using Tomcat 5. I even tried
-
I've downloaded xilisoft dvd creator 7 for mac to burn my iMovies since my mac book doesn't have idvd. I can get it to burn the movie, but the music is totally out of sync with the pictures. It's just fine when we watch the iMovie directly from my