How to configure the ST03N and ST06 for displaying the correct data?

Hello guys,
I have just finished a internal project installation following the installation guide.
Our R/3 System can run correctly. However, when I type st03n, it displays some strange data instead of the real server information. and also in st06, I cannot get the real OS information.
The OS collector said that saposcol is not running because of no process id found.
But in the OS level, I've checked the server and saposcol -s said that the saposcol is running correctly.
I searched some notes and modify the processor of the SAPOSCOl service, too. But nothing changes.
I think the ST06 issue is the root cause of the ST03N.
I just wonder that how I could configure the system to make the ST03N or the ST06 display the correct statistics?
Thanks in advance.

I got the answer myself.
I didn't know there were some standard jobs that are required to scheduled for a live R/3 System.
In SM36, find the standard jobs and input 'bc' in sap components and select the jobs scheduling job and set it as periodly run jobs(hourly).
then release the schedule.
And note 16083 has all the information.

Similar Messages

Can any one please tell me how to configure the oracle data gaurd. in steps

can any one please tell me how to configure the oracle data gaurd. in steps

Hi,
http://docs.oracle.com/cd/E11882_01/server.112/e25608/create_ps.htm#i63561
http://www.oracle.com/webfolder/technetwork/tutorials/obe/db/11g/r2/prod/ha/dataguard/physstby/physstdby.htm
Regards
Yoonas

The dates my photos were taken are now incorrect. Any suggestions on how to get the correct dates back?

The dates my photos were taken are not incorrect. Any suggestions on how to get the correct dates back?

Thank you Winston. This works and I can adjust several photos at the same time.

How to configure the org data determination rule, resp,and profile

Hi ,
Iam doing an Roll out project. I this i need to do the org data determination for this new co code .with out disturbing the existing one , I had already replicated all the master datas like material, customer, pricing,equipment from ecc to crm.
Now i want to determine the org data determination for this new comapny code with out affecting the existing one .
Could any one can help me on this.
Your answer will be really appreciated.
Thanks in Advance.
Mustafa

for this u have to maintain the rules profiles and attach this to transaction type for header or item category
documentaion is there
spro ->MD->org managment ->org data deter -->change rules and profiles

How to use multiple threads and swing for displaying status/interaction

I have a Swing-app which have to show progress and allow userinteraction for these tasks:
* First:
retrieve a list of IDs(String) from the database (single thread running)
* Second:
some work on the id-list and list written to hd (same thread as above)
* Third:
retrieve Objects (based on the id-list) from different sources (Multiple Threads are running)
To show the status I have a JProgressBar (indeterminate while task1&2 running) and
a JTextArea showing the current status (connect,retrieve list, sort, ...)
When task3 is starting the JTextArea have to disappear and be replaced by a ScrollPane
with an array of Labels/TextAreas showing the status of each thread.
While theses threads are working, the ID-list will be consumed and the JProgressBar
shows the remaining precentage of the hole progress.
Everything is working so far (excepts UI :) , the problem(s) I have:
I need the threads to interacts with the user through the ui. e.g: "Connection to db-xyz lost! reconnect?"
But I don´t know how to do this correctly.
I think one way would be to send an event to the ui... but how?
(the ui must know which thread is calling to unpause it after user answered)
I know that threads should NOT change the swing(-container) - How do I notify the ui that a thread has a question?
Since these threads are really time-consuming the UI is not updated frequently,
how can I increase this? (perhaps using another thread-priority?)
thanks for help!

if/when your threads need to interact with the UI, they can create a Runnable & send it to SwingUtilities.invokeLater or invokeAndWait. This Runnable can popup a message to the user, and act on the choice of the user (reconnect, cancel, ...). This action could be something which "unpauses" the task thread.
You may need to do synchronisation between the code in the Runnable & the Thread to which it is related - so the latter Thread knows when the user has made the choice.

How to configure the runtime and consolidation for a track in CMS.

How to configure the runtime and consolidation for a track in CMS.
I can see the track exists in CMS but the same doesnt pull up in the NWDS in the development configuration perspective.
I compared the given track with the one which gets pulled up in NWDS. Theres something called runtime system and consolidation which isnt defined for the track which is invisible.
Please advise , what are these required for. And how can we configure the same.

The runtime systems are defined for a track to setup the Transport path for any code changes....the Consolidation system is usually defined as a Virtual system for the track and used for comparison and fixing any broken or Dirty DC's ....that means it's not used as a Runtime System for Deployment as compared to DEV,QAT and PROD used for Deployment...
Hope it helps..
Regards,
Shikhil

How to configure multiple listeners to listen for the same instance.

Hello everyone,
I am running oracle database 11g and I want information regarding how to configure multiple listeners to listen for the same database instance. Actually I know how to configure more than one listener but the main thing that I am confused about is when we create listener.ora file, do we have to statically register the database instance with both the listeners or the instance will register itself with both the listeners.
According to my knowledge the instance will register with the listener specified by LOCAL_LISTENER parameter and we cannot have more than one value for this parameter.
Please only give detailed answers with example as I am tired of simple answers with details that I already know.

Hello,
Yes, it can make sense to have several listener for one Oracle instance. For instance you may have one listener for the applications another listener for DBA administration tasks as well as one listener dedicated to dataguard broker. It is not possible to have several listeners listening on the same IP and Port.
By default the database try to automatically register to a listener on port 1521. To instruct the instance to register to a specifc list of listeners you can add in the init.ora the local_listener parameter with an alias definition:
i.e
local_listener=MY_SET_OFF_LISTENERS
in your tnsname.ora add an entry called:
MY_SET_OFF_LISTENERS_LOCAL= (ADDRESS_LIST=
(ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1530))
(ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1531))
(ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1532))
In this sample your instance will register to three listeners listening on respectively port 1530, 1531 and 1532
If you want your clients can be balanced over the 3 listeners

How to Configure logical path and how to retrieve physical path for an IDOC

Hi ,
I want to configure logical path for an IDOC,
and then I need to retrieve Physical path from this logical path
using a FM (eg. FILE_GET_NAME).
How to configure the logical path for an idoc ?
Regards ,
Harshit Rungta

Using Logical Files in ABAP Programs
To create a physical file name from a logical file name in your ABAP programs, use the function module FILE_GET_NAME. To insert the function module call in your program, choose Edit ® Insert statement from the ABAP Editor screen. A dialog box appears. Select Call Function and enter FILE_GET_NAME. The parameters of this function module are listed below.
Import parameters
Parameters
Function
CLIENT
The maintenance tables for the logical files and paths are client-dependent. Therefore, the desired client can be imported. The current client is stored in the system field SY-MANDT.
LOGICAL_FILENAME
Enter the logical file name in upper case letters that you want to convert.
OPERATING_SYSTEM
You can import any operating system that is contained in the list in Transaction SF04 (see Assigning Operating Systems to Syntax Groups). The physical file name will be created according to the syntax group to which the operating system is linked. The default parameter is the value of the system field
SY-OPSYS.
PARAMETER_1
PARAMETER_2
If you specify these import parameters, the reserved words in the physical path names will be replaced by the imported values.
USE_PRESENTATION
_SERVER
With this flag you can decide whether to import the operating system of the presentation server instead of the operating system imported by the parameter OPERATING_SYSTEM.
WITH_FILE_EXTENSION
If you set this flag unequal to SPACE, the file format defined for the logical file name is appended to the physical file name.
Export Parameters
Parameters
Function
EMERGENCY_FLAG
If this parameter is unequal to SPACE, no physical name is defined in the logical path. An emergency physical name was created from table FILENAME and profile parameter DIR_GLOBAL.
FILE_FORMAT
This parameter is the file format defined for the logical file name. You can use this parameter, for example, to decide in which mode the file should be opened.
FILE_NAME
This parameter is the physical file name that you can use with the ABAP statements for working with files.
Exception Parameters
Parameters
Function
FILE_NOT_FOUND
This exception is raised if the logical file is not defined.
OTHERS
This exception is raised if other errors occur.
Suppose the logical file MYTEMP and the logical path TMP_SUB are defined as in the preceding topics and we have the following program:
DATA: FLAG,
      FORMAT(3),
      FNAME(60).
WRITE SY-OPSYS.
CALL FUNCTION 'FILE_GET_NAME'
     EXPORTING
          LOGICAL_FILENAME        = 'MYTEMP'
          OPERATING_SYSTEM        = SY-OPSYS
          PARAMETER_1             = '01'
     IMPORTING
          EMERGENCY_FLAG          = FLAG
          FILE_FORMAT             = FORMAT
          FILE_NAME               = FNAME
     EXCEPTIONS
          FILE_NOT_FOUND          = 1
          OTHERS                  = 2.
IF SY-SUBRC = 0.
WRITE: / 'Flag      :', FLAG,
         / 'Format    :', FORMAT,
         / 'Phys. Name:', FNAME.
ENDIF.
The output appears as follows:
HP-UX
FLAG :
FORMAT : BIN
Phys. Name: /tmp/TEST01
In this example, the R/3 System is running under the operating system HP-UX, which is member of the syntax group UNIX. The logical file name MYTEMP with the logical path TMP_SUB is converted into a physical file name /tmp/TEST01 as defined for the syntax group UNIX. The field FNAME can be used in the further flow of the program to work with file TEST01 in directory /tmp.
Suppose we have a logical file name EMPTY with the physical file name TEST, connected to a logical path that has no specification of a physical path. If you replace the EXPORTING parameter 'MYTEMP' with 'EMPTY' in the above example, the output appears as follows:
HP-UX
FLAG : X
FORMAT :
Phys. Name: /usr/sap/S11/SYS/global/TEST
The system created an emergency file name, whose path depends on the installation of the current R/3 System.

How to configure the XI and PLM in discovery box

How to configure the XI (SLD, Integration repository, Integration Builder ) in SAP discovery system.
And also i want to configure the PLM and xRPM within R/3 of discovery box.
Regards,
Nilesh Damle

Hi Frank,
well, first of all, your application provides log configuration information using an XML file at deployment time. This file is called log-configuration.xml (you can see the DTD description here: http://help.sap.com/saphelp_nw04/helpdata/en/48/ef8748caed894bb4b3ae953a60c592/frameset.htm). There you can set configure log controllers, which could be two types: location and category. So, you can specify your location and severity there. This is described here: http://help.sap.com/saphelp_nw04/helpdata/en/35/671c0136b4714c9e1b16b68211287b/frameset.htm.
Then, after the application is deployed, the log configurations you provided for it are registered with the Log Configuration tool I mentioned about. Using this tool you can later on modify your configurations at runtime (for example, change the severity level) without having to redeploy the application.
I hope it's clearer now? I guess it was me not getting your first question correctly that caused your confusion.
Greetings,
Ivo

How to configure SharePoint 2010 / 2013 Search for SQL Database Contents and Oracle Database Contents?

Hi All,
We are planning to maintain the contents in SQL / Oracle. Could you please suggest anyone which is best for SharePoint 2010 / 2013 Search. How to configure the search for external content source?
Thanks & Regards,
Prakash

This link explains supported and non supported scenarios to use Oracle for BCS
http://social.technet.microsoft.com/Forums/sharepoint/en-US/453a3a05-bc50-45d0-8be8-cbb4e7fe7027/oracle-db-as-external-content-type-in-sharepoint-2013
And here is more on it
http://msdn.microsoft.com/en-us/library/ff464424%28office.14%29.aspx
And here how you can connect Oracle to SharePoint for BCS functionality
http://lightningtools.com/bcs/business-connectivity-services-in-sharepoint-2013-and-oracle-using-meta-man/
Overall it seems SQL doenn't require any special arrangement to connect BCS to SharePoint.
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful.

How to configure the Easy Setup to match the sequence type for playback

Plesae provide some suggestion for how to configure the Easy Setup in FCP 6.05.
*Uncompressed HD 8-bit (1920 x 1080p30)video streams
e.g:
1. Choose Final Cut Pro > Easy Setup.
2. Choose ?? from the Format pop-up menu
3. Choose “all rates” from the Rate pop-up menu.
4. Click the USE pop-up menu, choose which format?
Also how about Uncompressed SD 8-bit (720 x 480p30) video streams ?
Thanks,

Thanks for the advice.
In the project, I created two sequences.
Import all my HD 8-bit clips into sequence 1, and say yes to mach the format
and import all my SD 8-bit clips into sequence 2 and say yes.
In Sequence-> setting-> I verified the configuration as following:
However, that is "Load sequence preset" button, I am not sure what is that for and also do I need to go to Final cut pro -> easy setup to configure the format again?
I just want to playback all my HD clips to make sure no dropped frame and
then playback my SD clips sequence to make sure the performace are OK.
Here are the format for HD clips:
HD 1920x1080 HDTV 1080i (16:9); upper; uncompress 4:2:2.
Here are the format for HD clips:
SD 720x480 NTSSC DV (3:2), NTSC-CCIR601, lower , uncmpress 8-bit 4:2:2.

How to Configure the Netweaver CE UDDI Server and Registry

Hi,
I'm trying to configure the UDDI registry in Netweaver CE (trial version 7.1 SR 1) following the <a href="http://help.sap.com/saphelp_nwce10/helpdata/en/45/47e8e91587072fe10000000a155369/frameset.htm">SAP Help documentation</a>. But as the help is not detailed not sure whether I'm doing it correctly. I can access the Service Registry by http://<host>:<port>/sr but not sure whether everything is fine. Also I want to publish Enterprise Services in the registry. As it's not possible to do that from ABAP 7.0 WebAS (doesn't not support UDDI v3) I want to do it via the UDDI client. How to configure the UDDI client by providing the Inquiry URL, Publish URL, etc in the settings?
Please help me if anyone has any information regarding this.
Thanks,
Dipankar

I am working through the same issues and have not found all of the answers. However, this may get you closer.
See http://help.sap.com/saphelp_nwce10/helpdata/en/45/635dd614d73bdbe10000000a1553f7/content.htm for some physical destinations that have to be set up for Visual Composer.
You can also connect to the registry in NetWeaver Developer Studio by launching the Web Services Explorer from the J2EE Perspecive. See the help for more details.

How to get the salesprice and condition for a customer / material / date

Hi all,
how can I get the correct price and condition for a customer / material / date ?
I know this is possible using the BAPI_SALESORDER_SIMULATE, but this bapi is using to much ressources on the system.
I'm trying to get the correct price and condition WITHOUT using that BAPI.
Does anyone know how it is possible ? As said before : I have the customer, material and a date.
thanks in advance for your help

Hi
You need it because it's possible to have a complex pricing procedure, and you can't do it with a simple select on a table. Think that you can have pricing requirements, formulas (ie: VOFM) and so on in your pricing procedure (tcode V/08).
I hope this helps you
Regards
Eduardo

How to configure the wifi access with specific time slot for kids?

how to configure the wifi access with specific time slot for kids?

Which model of AirPort base station do you have? Which version of OS X is your MacBook Pro running?
Wi-Fi access can be limited using the Timed Access feature of the AirPort routers. You would do so using the AirPort Utility.

ASA 5505 8.4. How to configure the switch to the backup channel to the primary with a delay (ex., 5 min) using the SLA?

I have ASA 5505 8.4. How to configure the switch to the backup channel to the primary with a delay (for example 5 min.) using the SLA monitor?
Or as something else to implement it?
My configuration for SLA monitor:
sla monitor 123
type echo protocol ipIcmpEcho IP_GATEWAY_MAIN interface outside_cifra
num-packets 3
timeout 3000
frequency 10
sla monitor schedule 123 life forever start-time now
track 1 rtr 123 reachability

Hey cadet alain,
thank you for your answer :-)
I have deleted all such attempts not working, so a packet-trace will be not very useful conent...
Here is the LogLine when i try to browse port 80 from outside (80.xxx.xxx.180:80) without VPN connection:
3
Nov 21 2011
18:29:56
77.xxx.xxx.99
59068
80.xxx.xxx.180
80
TCP access denied by ACL from 77.xxx.xxx.99/59068 to outside:80.xxx.xxx.180/80
The attached file is only the show running-config
Now i can with my AnyConnect Clients, too, but after connection is up, my vpnclients can't surf the web any longer because anyconnect serves as default route on 0.0.0.0 ... that's bad, too
Actually the AnyConnect and Nat/ACL Problem are my last two open Problems until i setup the second ASA on the right ;-)
Regards.
Chris

How to configure the ST03N and ST06 for displaying the correct data?

Similar Messages

Maybe you are looking for