How to connect or weld two points

I have two halves (opposites) of an open shape that I want to
"weld" together. What's the best way to go about doing this?
Thanks in advance

I've found it!
I did a couple of things:
1. I aligned the two points on the touching edge of both
paths using Align and turning on "Anchors: Apply to selected
anchors and control points" (the middle button when anchors is
turned on)
2. I selected both paths and used Modify>Combine
Paths>Union.
This actually made each pair of points into 1 point (at top
and bottom)
If this sounds confusing to anyone, just imagine trying to
combine two halves of the outline of a rectangle to form a close
rectangle.
The Join (Ctrl+J) combines two paths into one object with two
paths while union combines the the two paths into one path. Now
when the object is filled there are no gaps.

Similar Messages

How to measure distance between two points uisng uiaccelerometer

Hello all,
I am trying to measure distance between two points.So for that i am used uiaccelerometer but its give only rotation changes. I am moving my whole device from one point to another point so for that all x,y & z changes remain same. So how can get the device movement for that?
Thank you..

UIAccelerometer does not give rotation changes, it senses acceleration in each of the 3 axis in g-force units. Moving in a plane from one point to another and stopping will result in a net g-force in that axis of zero. To get distance one has to measure the initial acceleration and then the time before a deceleration is detected. It gets really complicated in real life since the start and stop are not instantaneous.

How to connect ABAP proxy to two different XIs

Hi, everyone.
I want to know there is a way to connect ECC to two different XIs using ABAP proxy.
As I know, it is much easier to make scenario with RFC or IDoc sender
but in our case we have to use ABAP proxy and must send to two XIs
So, according to the plant type in the record, data should be splitted to each XIs.
And I wonder I should use logical port for each XI.
Does anyone have a experience to implement this kind of scenario?
Then Pls show me the guide how to implement.
Very Urgent.
Thanks.

Hi,
You cannot connect one ABAP proxy to two different XI systems at the same time.
The configuration held in transaction SLDAPICUST holds the XI system that is connected (as well as the SM59 details held will only point to one XI system at any one time)
Why would you want to send a message dependant on content to different XI systems ? Surely you would use conditional receiver determination in XI to route the message correctly.
Cheers
Colin.

How do I see the clients that are connected to the access point?

Hello,
In Wireless Control System (WCS), how do I see all the clients that are connected to the Access Point? I can do a particular search that if I know the mac address. But what I really like to know is that which clients is connected to the network. That means it sould be able to show me, example, Client A is connected to AP 1. The problem in WCS is that I can't do that. Can some please advice how I am able to do this? Thanks.

Two ways:
First:
Under monitor, go to Access Points, then chose the target AP and click on it to open a menu, go to the Current Associated Clients tab.
Second:
User the search tool on your upper right corner, type in the target AP name, execute the search, on the results, click view list, on the list chose you AP and then go to the Current Associated Clients tab.
Enjoy.
Phil.

How to connect two external monitors to a Mac Book Pro?

How to connect two external monitors to a Mac Book Pro?

Not as is, but Matrox makes a peripheral that enables connecting more than one external monitor - matrox.com.

I have created an iTunes account on my current computer for my daughters ipod touch and tried connecting my ipod nano and it won't sync and says that it is associated with another iTunes library so how do I merge the two libraries?

I have created an iTunes account on my current computer for my daughters ipod touch and tried connecting my ipod nano and it won't sync and says that it is associated with another iTunes library so how do I merge the two libraries?

You do not merge libraries.
iDevices sync to one and only one computer.
If you want a single library, you manually move the content from one library to another... all content will still be associated with the Apple ID it was acquired with.

How to connect one database in two threads?

Dear All,
If anyone can tell me how to connect one database concurrently?
I tried the following idea:
1.create a Hashtable to keep database objects(those databases have been opened)
2.Before openning(connecting) a database:first step is to check the hashtable.
If the the database object is in the hashtable, this object will be returned.
If the datatbase object is not in the hastable, open the database and store this opened database object into the hashtable.
I failed the test of this implementation. My test is:Create two threads (extend java Thread class).In each of these two threads, try to open the same database.Just like the following:
MyThread thread1 = new MyThread();
MyThread thread2 = new MyThread();
thread1.start();
thread2.start();
I guessed the database object in the hashtable would be returned in the second thread.Unfortunatly, I only got an exception which meant the database couldn't be opened twice.It looks like the second thread happened before the opened database object stored into the hashtable.
I cannot figure out if my design is wrong or my test application is wrong.
I really appriatiate your attentions!!!
Lu

um not sure i follow exactly but in your code add the word synchronise to it and this means only 1 tread can access it at any 1 time.
So your could have a class which is a singleton so it only opens the dbase once and then all other access share your connection.
so
public class foo{
foo INSTANCE = new foo();
private foo(){} //private constructor
then all your methods use foo's internal dbase connection. Am i making sense

How do I connect the scatter plot points in the newest numbers?

I just made a scatter plot for biology and I was wondering how I connect the points with lines

It sounds like all of your wireless clients (computers & printer) are having issues with the overall signal quality of your Wi-Fi network.
I suggest that you check out the following Apple Support article on the sources of Wi-Fi interference and try to identify & eliminate as many as possible to improve your wireless network.
You may also find the following Macworld article helpful on troubleshooting for Wi-Fi interference. Although this article is specific to the AirPort routers, it can equally apply to any manufacturers' product.

How to connect the two field which have a diffrent length

Hi,
 i have two table one is VBRP-VGBEL CHAR 10
 second is MKPF-XBLNR CHAR 16
both are same data means vgbel eq xblnr.
how to connect these table because when i connect these table it gives me error
have a same type and length.
please give me reply soon . Thanks.
dinesh

HI
I GOT THE SAME PROBLEM AT THAT TIME I DONE LIKE THIS
I THINK IT MAY HELPFULL FOR YOU
OBJID = 6 CHAR
SOBID = 40 CHAR
I GOT THE SAME ERROR WHAT YOU GET
I NEED ONLY 6 CHAT SO THAT WHY I HAD WROTE THIS LOGIC
1ST I HAD DECLARED THE SAME STRUCTURE TWICE
IN FIRST ONE IT IS NORMAL DECLARATION
IN SECOND ONE I HAD DECLARED THAT 2 FIELDS AS THE SAME LENGTH
I HAD PUT THAT IN THA BOLD LETTERS
AND AFTER THAT I HAD LOOPES THAT WORK AREA AND CONVERTED THAT SZE
REWARD IF USEFULL
TYPES : BEGIN OF ST_HRP1001,
 OTYPE TYPE HRP1001-OTYPE,
 OBJID TYPE HRP1001-OBJID,
 RELAT type hrp1001-RELAT,
 BEGDA TYPE HRP1001-BEGDA,
 ENDDA TYPE HRP1001-ENDDA,
 SCLAS TYPE HRP1001-SCLAS,
 SOBID TYPE HRP1001-SOBID,
 END OF ST_HRP1001.
TYPES : BEGIN OF ST_SOBID,
 OTYPE TYPE HRP1001-OTYPE,
 OBJID TYPE HRP1001-OBJID,
 RELAT type hrp1001-OBJID,
 BEGDA TYPE HRP1001-BEGDA,
 ENDDA TYPE HRP1001-ENDDA,
 SCLAS TYPE HRP1001-SCLAS,
 SOBID TYPE HRP1001-OBJID,
 END OF ST_SOBID.
SELECT OTYPE
 OBJID
 RELAT
 BEGDA
 ENDDA
 SCLAS
 SOBID FROM HRP1001 INTO TABLE IT_HRP1001
 WHERE OTYPE = 'D'
 AND OBJID IN S_OBJID
 AND BEGDA GE DATE-LOW
 AND ENDDA LE DATE-HIGH
 AND ( SCLAS = 'E' OR SCLAS = 'ET' ).
IF SY-SUBRC NE 0.
 MESSAGE 'NO RECORD FOUND FOR THE GIVEN SELECTION CRITERIA ' TYPE 'E'.
ENDIF.
LOOPING TO CONVERT THAT FIELD LENGHT
 LOOP AT IT_HRP1001 INTO WA_HRP1001.
 WA_SOBID-OTYPE = WA_HRP1001-OTYPE.
 WA_SOBID-OBJID = WA_HRP1001-OBJID.
 WA_SOBID-RELAT = WA_HRP1001-RELAT.
 WA_SOBID-BEGDA = WA_HRP1001-BEGDA.
 WA_SOBID-ENDDA = WA_HRP1001-ENDDA.
 WA_SOBID-SCLAS = WA_HRP1001-SCLAS.
 WA_SOBID-SOBID = WA_HRP1001-SOBID.
 APPEND WA_SOBID TO IT_SOBID.
ENDLOOP.
SELECT OTYPE
 OBJID
 AEDTM
 UNAME
 DELET
 CANCR
 NCONT
 FROM HRP1026
 INTO TABLE IT_HRP1026
 FOR ALL ENTRIES IN IT_SOBID
 WHERE OBJID = IT_SOBID-SOBID
 AND ( OTYPE = 'E' OR OTYPE = 'ET' )
 AND DELET = 'X' AND
 BEGDA GE DATE-LOW AND
 ENDDA LE DATE-HIGH.

How to connect two computers

please help me
how to connect two computers through telephone line

Double Post. See:
http://forum.java.sun.com/thread.jspa?threadID=770305&tstart=0

How to connect the two virtual machine .

I installed VM workstation and created two virtual machine .Please suggest me how to connect them internally each other though vm network editor.I want create RAC Setup for practice.

NAT is the default adapter type in VirtualBox, which will work in almost any configuration and networking environment. Using the NAT adapter, the host system will establish connections on behalf of the guest OS. NAT requires that the corresponding VM guest adapter uses DHCP and cannot be used to provide any services unless you configure port forwarding (>1024) at the VirtualBox VM NAT adapter.
Bridged networking is the most transparent adapter type, but requires a physical network adapter on the host OS, which is limited depending on the host system and hardware, e.g. wireless. It also requires that the user understands network and routing restrictions of the host system in case of using the interface to communicate between the host and VM. A combination of host-only and NAT may sometimes be necessary to allow the VM to connect to the internet and allow the host to communicate with the VM guest OS.
Btw, the host-only adapter IP actually works on behalf of the host OS and can be used to allow the VM to access the host system. So if Internet is not required, the NAT or bridged adapter are not required. I'm not sure if many people realize that, since it's not really mentioned in the documentation. So if you use the host-only adapter, simply use the host-only IP instead of the host system real IP to connect the VM to the host OS.
I also switched to VirtualBox a couple of years ago, mainly because it provides more VM hardware options, is free and because of the ability to manage multiple virtual machines and group them together. I have about 70 virtual machines for testing and evaluating configured on my home computer. I also like the option in VirtualBox to clone a VM based on a Snapshot.
VMware provides a Virtual Network Editor in VMware Workstation (KB 1018697), which allows to customize any of the existing virtual network adapter or add new ones. The available technologies under any Type 2 hypervisor are very similar between different products:
http://www.vmware.com/support/ws45/doc/network_configure_ws.html

How to connect one ECC 6.0 system to two BW ssytems.

Hello all,
I am trying to connect one ECC 6.0 systems to two different BW systems. The BW systems have two different logic names.
I tried to find an answer in the threads , but could not able to find the steps. they were talking about the notes which fixes for the deltas. but I am not even able to connect the systems at all to implement that notes.
Please give me the steps how to connect to an another BW2 system. The connection between ECC and BW1 ia working fine.
Thanks,

The error message is .
Source system cannot use any of the proposed connection names
Message no. RSAR362
Diagnosis
Every connection to a source system is named using a unique two-digit identifier. Source system LOGTST100 does not accept any of the proposed values.
The last proposed value was BB.
System Response
Source system has not been connected.
Procedure
If you want to recreate the source system from BI information, then you can only use a single value, namely BB, because the connection already has this name in BI.
Delete the existing connections in the source system or contact a BI consultant.

How to plot two points simultaneously on image?

I want to plot two points simultaneously on an image. I tried using IMAQ overlay point and IMAQ Light meter for point. But when I try to plot two points using either of these two VIs, I find not even one point is plotted. How to resolve this?
Solved!
Go to Solution.

intensity a écrit:
I want to plot two points simultaneously on an image. I tried using IMAQ overlay point and IMAQ Light meter for point. But when I try to plot two points using either of these two VIs, I find not even one point is plotted. How to resolve this?If your image is zoomed out, the point size may be to small to allow a proper drawing of the point. Otherwise IMAQ overlay point works flawlessly...
Message Edité par chilly charly le 01-31-2009 11:40 AM
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Example_VI.png ‏223 KB

Hibernate query...how to connect two databases...

hi i m new to hibernate..
i created two tables..
1st table is catalog:
2nd table is acctinfo
//HBM file is :
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE hibernate-mapping PUBLIC "-//Hibernate/Hibernate Mapping DTD 3.0//EN" "http://hibernate.sourceforge.net/hibernate-mapping-3.0.dtd">
<hibernate-mapping>
<class name="hibernate.example.Catalog" table="catalog">
<id name="id" type="integer" column="ID">
<generator class="increment"/>
</id>
<property name="journal" type="string" column="JOURNAL"/>
<property name="publisher" type="string" column="PUBLISHER"/>
<property name="edition" type="string" column="EDITION"/>
<property name="title" type="string" column="TITLE"/>
<property name="author" type="string" column="AUTHOR"/>
<bag name="accinfo" cascade="all" >
<key column="ID"/>
<one-to-many class="hibernate.example.Acctinfo"/>
</bag>
</class>
<class name="hibernate.example.Acctinfo" table="acctinfo">
<id name="id" type="integer" column="ID">
<generator class="increment"/>
</id>
<property name="account" type="string" column="ACCOUNT"/>
<property name="password" type="string" column="PASSWORD"/>
<property name="balance" type="string" column="BALANCE"/>
</class>
</hibernate-mapping>
///******************getter setter file is::****************
package hibernate.example;
public class Acctinfo
 int id;
 String account;
 String password;
 String balance;
 public Acctinfo()
 public void setId(int id)
 this.id = id;
 public int getId()
 return id;
 public void setAccount(String account)
 this.account = account;
 public void setPassword(String password)
 this.password = password;
 public void setBalance(String balance)
 this.balance = balance;
 public String getAccount()
 return account;
 public String getBalance()
 return balance;
 public String getPassword()
 return password;
//********************2nd getter setter file is:***********************
package hibernate.example;
import java.util.List;
public class Catalog
int id;
String journal;
String publisher;
String edition;
String title;
String author;
private List accinfo;
public Catalog()
public void setId(int id)
this.id = id;
public int getId()
return id;
public void setJournal(String journal)
this.journal = journal;
public String getJournal()
return journal;
public void setPublisher(String publisher)
this.publisher = publisher;
public String getPublisher()
return publisher;
public void setEdition(String edition)
this.edition = edition;
public String getEdition()
return edition;
public void setTitle(String title)
this.title = title;
public String getTitle()
return title;
public void setAuthor(String author)
this.author = author;
public String getAuthor()
return author;
public void setAccinfo(List accinfo)
this.accinfo = accinfo;
public List getAccinfo()
return accinfo;
* To change this template, choose Tools | Templates
* and open the template in the editor.
package hibernate.example;
import hibernate.example.Acctinfo;
import hibernate.example.Catalog;
import java.util.ArrayList;
import java.util.Iterator;
import java.util.List;
import java.util.ListIterator;
import org.hibernate.Query;
import org.hibernate.SQLQuery;
import org.hibernate.Session;
import org.hibernate.SessionFactory;
import org.hibernate.Transaction;
import org.hibernate.cfg.Configuration;
public class CatalogClient
 Session session = null;
 SessionFactory sessionFactory = new Configuration().configure().buildSessionFactory();
 public static void main(String str[])
 CatalogClient clc = new CatalogClient();
 //clc.saveData();
 //clc.deleteData();
 //clc.showData();
 clc.updateData();
 public void showData()
 try
 session =sessionFactory.openSession();
 String SQL_QUERY ="select id, journal, publisher, edition, title, author from catalog";
 // String SQL_QUERY ="select c.ID, c.JOURNAL, c.PUBLISHER, c.EDITION, c.TITLE, c.AUTHOR, a.ACCOUNT, a.PASSWORD,a.BALANCE from catalog c, ACCTINFO a where c.ID = a.ID";
 SQLQuery query = session.createSQLQuery(SQL_QUERY);
 System.out.println("*** query : *** "+ query);
 //for(ListIterator it=query.list().listIterator();it.hasNext();)
 for (ListIterator lit = query.list().listIterator(); lit.hasNext();)
 Object[] row = (Object[]) lit.next();
 /*System.out.println("ID: " + row[0]);
 System.out.println("Title: " + row[1]);
 System.out.println("Author: " + row[2]);
 System.out.println("Isbn: " + row[3]);
 System.out.println("Pages: " + row[4]);
 System.out.println("Copyright: " + row[5]);
 System.out.println("Cost: " + row[6]);
 System.out.println("******NEXT****************");
Object[] row = (Object[]) it.next();*/
 System.out.println("ID: " + row[0]);
 System.out.println("JOURNAL: " + row[1]);
 System.out.println("PUBLISHER: " + row[2]);
 System.out.println("EDITION: " + row[3]);
 System.out.println("TITLE: " + row[4]);
 System.out.println("AUTHOR: " + row[5]);
 System.out.println("acc: " + row[6]);
 System.out.println("pass: " + row[7]);
 System.out.println("bal: " + row[8]);
 System.out.println("***************************");
 session.close();
 catch(Exception e)
 System.out.println(e.getMessage());
 public void saveData()
 session =sessionFactory.openSession();
 Transaction transaction = null;
 transaction = session.beginTransaction();
 Catalog catalog = setBean();
 //System.out.println("before save");
 session.save(catalog);
 //System.out.println("after save");
 transaction.commit();
 session.flush();
 session.close();
 public void updateData()
 session =sessionFactory.openSession();
 Catalog catalog = new Catalog();
 catalog.setId(2);
 catalog.setAuthor("manoj");
 catalog.setJournal("java");
 catalog.setEdition("1st");
 catalog.setPublisher("indiabulls");
 catalog.setTitle("java Servlet");
 session.update(catalog);
 session.flush();
 session.close();
 public void deleteData()
 session =sessionFactory.openSession();
 Catalog catalog = new Catalog();
 catalog.setId(3);
 session.delete(catalog);
 session.flush();
 session.close();
 public static Catalog setBean()
 Acctinfo accinfo = new Acctinfo();
 accinfo.setAccount("MANOJ1");
 accinfo.setPassword("orbis");
 accinfo.setBalance("1000");
 List list = new ArrayList();
 list.add(accinfo);
 Catalog catalog = new Catalog();
 catalog.setJournal("india");
 catalog.setPublisher("indiabulls");
 catalog.setEdition("ist");
 catalog.setTitle("orbis");
 catalog.setAuthor("manoj");
 catalog.setAccinfo(list);
 return catalog;
//********************CFG FILE IS ******************
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE hibernate-configuration PUBLIC "-//Hibernate/Hibernate Configuration DTD 3.0//EN" "http://hibernate.sourceforge.net/hibernate-configuration-3.0.dtd">
<hibernate-configuration>
<session-factory name="session">
<property name="hibernate.dialect">org.hibernate.dialect.Oracle9Dialect</property>
<property name="hibernate.connection.driver_class">oracle.jdbc.driver.OracleDriver</property>
<property name="hibernate.connection.url">jdbc:oracle:thin:@172.16.31.25:1521:BOMBAY</property>
<property name="hibernate.connection.username">mumbai</property>
<property name="hibernate.connection.password">mumbai123</property>

<property name="connection.autocommit">true</property>
<property name="dialect">org.hibernate.dialect.OracleDialect</property>

<mapping resource="Catalog.hbm.xml"/>
</session-factory>
</hibernate-configuration>
**********************error i m facing is :************************
0 [main] WARN net.sf.ehcache.config.Configurator - No configuration found. Configuring ehcache from ehcache-failsafe.xml found in the classpath: jar:file:/C:/Documents%20and%20Settings/d.poonam/Desktop/hibernate/lib/ehcache-1.1.jar!/ehcache-failsafe.xml
1188 [main] WARN org.hibernate.impl.SessionFactoryObjectFactory - Could not bind factory to JNDI
javax.naming.NoInitialContextException: Need to specify class name in environment or system property, or as an applet parameter, or in an application resource file: java.naming.factory.initial
 at javax.naming.spi.NamingManager.getInitialContext(Unknown Source)
 at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source)
 at javax.naming.InitialContext.getURLOrDefaultInitCtx(Unknown Source)
 at javax.naming.InitialContext.getNameParser(Unknown Source)
 at org.hibernate.util.NamingHelper.bind(NamingHelper.java:52)
 at org.hibernate.impl.SessionFactoryObjectFactory.addInstance(SessionFactoryObjectFactory.java:90)
 at org.hibernate.impl.SessionFactoryImpl.<init>(SessionFactoryImpl.java:247)
 at org.hibernate.cfg.Configuration.buildSessionFactory(Configuration.java:1043)
 at hibernate.example.CatalogClient.<init>(CatalogClient.java:24)
 at hibernate.example.CatalogClient.main(CatalogClient.java:27)
please help me out....
thanks in advance..
if u know how to connect two tables plz let me know..
its urgent....

I made this work with MySQL. Adapt to your situation as needed. - %
package hibernate.model;
import hibernate.util.HibernateUtils;
import hibernate.model.Catalog;
import hibernate.model.Account;
import org.apache.commons.logging.Log;
import org.apache.commons.logging.LogFactory;
import org.hibernate.Session;
import hibernate.util.HibernateUtils;
import static junit.framework.Assert.assertEquals;
import static junit.framework.Assert.assertNotNull;
public class CatalogTest
 private static final Log LOGGER = LogFactory.getLog(CatalogTest.class);
 public static void main(String[] args)
 Session session = null;
 try
 session = HibernateUtils.getSessionFactory().getCurrentSession();
 session.beginTransaction();
 int rowsBefore = HibernateUtils.getRowCount(session, Catalog.class);
 assertEquals("should not have any Catalogs", rowsBefore, 0);
 Catalog catalog = new Catalog("test title");
 catalog.addAccount(new Account(100));
 catalog.addAccount(new Account(200));
 Long id = (Long) session.save(catalog);
 assertNotNull("generated id should not be null", id);
 LOGGER.info("returned id: " + id);
 session.getTransaction().commit();
 LOGGER.debug("transaction committed");
 catch (Exception e)
 LOGGER.error(e);
 session.getTransaction().rollback();
package hibernate.model;
import java.io.Serializable;
import java.text.NumberFormat;
public class Account implements Serializable
 private Long id;
 private int balance;
 public Account()
 this(null, 0);
 public Account(int balance)
 this(null, balance);
 public Account(Long id, int balance)
 this.id = id;
 this.balance = balance;
 public Long getId()
 return id;
 private void setId(Long id)
 this.id = id;
 public int getBalance()
 return balance;
 private void setBalance(int balance)
 this.balance = balance;
 public boolean equals(Object o)
 if (this == o)
 return true;
 if (!(o instanceof Account))
 return false;
 Account account = (Account) o;
 return !(id != null ? !id.equals(account.id) : account.id != null);
 public int hashCode()
 int result;
 result = (id != null ? id.hashCode() : 0);
 result = 31 * result + balance;
 return result;
 public String toString()
 return new StringBuilder().append("Account{").append("id=").append(id).append(", balance=").append(NumberFormat.getCurrencyInstance().format(balance)).append('}').toString();
<?xml version="1.0"?>
<!DOCTYPE hibernate-mapping PUBLIC
 "-//Hibernate/Hibernate Mapping DTD 3.0//EN"
 "http://hibernate.sourceforge.net/hibernate-mapping-3.0.dtd">
<hibernate-mapping package="hibernate.model" default-access="field" default-lazy="true">
 <class name="Account" table="accounts">
 <id name="id" column="account_id">
 <generator class="native"/>
 </id>
 <property name="balance" column="balance"/>
 </class>
</hibernate-mapping>
package hibernate.model;
import java.io.Serializable;
import java.util.Set;
import java.util.HashSet;
import java.util.Collections;
public class Catalog implements Serializable
 private Long id;
 private String title;
 private Set<Account> accounts;
 public Catalog()
 this(null, "", Collections.EMPTY_SET);
 public Catalog(String title)
 this(null, title, Collections.EMPTY_SET);
 public Catalog(Long id, String title, Set<Account> accounts)
 this.id = id;
 this.title = title;
 this.accounts = new HashSet<Account>(accounts);
 public Long getId()
 return id;
 private void setId(Long id)
 this.id = id;
 public String getTitle()
 return title;
 private void setTitle(String title)
 this.title = title;
 public Set<Account> getAccounts()
 return accounts;
 private void setAccounts(Set<Account> accounts)
 this.accounts = accounts;
 public void addAccount(Account account)
 this.getAccounts().add(account);
 public void removeAccount(Account account)
 this.getAccounts().remove(account);
 public boolean equals(Object o)
 if (this == o)
 return true;
 if (!(o instanceof Catalog))
 return false;
 Catalog catalog = (Catalog) o;
 return !(id != null ? !id.equals(catalog.id) : catalog.id != null);
 public int hashCode()
 return (id != null ? id.hashCode() : 0);
 public String toString()
 return new StringBuilder().append("Catalog{").append("id=").append(id).append(", title='").append(title).append('\'').append(", accounts=").append(accounts).append('}').toString();
<?xml version="1.0"?>
<!DOCTYPE hibernate-mapping PUBLIC
 "-//Hibernate/Hibernate Mapping DTD 3.0//EN"
 "http://hibernate.sourceforge.net/hibernate-mapping-3.0.dtd">
<hibernate-mapping package="hibernate.model" default-access="field" default-lazy="true">
 <class name="Catalog" table="catalogs">
 <id name="id" column="catalog_id">
 <generator class="native"/>
 </id>
 <property name="title" column="title"/>
 <set name="accounts" cascade="all">
 <key column="catalog_id"/>
 <one-to-many class="hibernate.model.Account"/>
 </set>
 </class>
</hibernate-mapping>
<!DOCTYPE hibernate-configuration PUBLIC
 "-//Hibernate/Hibernate Configuration DTD 3.0//EN"
 "http://hibernate.sourceforge.net/hibernate-configuration-3.0.dtd">
<hibernate-configuration>
 <session-factory>
 <property name="connection.driver_class">com.mysql.jdbc.Driver</property>
 <property name="connection.url">jdbc:mysql://localhost:3306/hibernate?autoReconnect=true</property>
 <property name="connection.username">hibernate</property>
 <property name="connection.password">hibernate</property>
 <property name="connection.pool_size">1</property>
 <property name="dialect">org.hibernate.dialect.MySQL5InnoDBDialect</property>
 <property name="show_sql">true</property>
 <property name="generate_statistics">true</property>
 <property name="query.factory_class">org.hibernate.hql.classic.ClassicQueryTranslatorFactory</property>
 <property name="cache.provider_class">org.hibernate.cache.NoCacheProvider</property>
 <property name="cache.use_minimal_puts">false</property>
 <property name="cache.use_query_cache">false</property>
 <property name="order_updates">false</property>
 <property name="hbm2ddl.auto">create-drop</property>
 <property name="current_session_context_class">thread</property>
 <mapping resource="hibernate/persistence/hibernate/Account.hbm.xml"/>
 <mapping resource="hibernate/persistence/hibernate/Catalog.hbm.xml"/>
 </session-factory>
</hibernate-configuration>

I am using an Airport Extreme for wireless and a Netgear VPN Switch for wired connections. How do I get the two networks to connect?

I am using an Airport Extreme for wireless and also have a Netgear VPN Switch (FV5318) for internal wired ethernet connections. How do I get the two networks to connect to each other?

Tesserax, I would like to keep the Airport Extreme in nplace before the Netgear FVS318 switch because I am using all of the 8 ethernet outputs distributed to 8 differerent locationsl This way I can just use one of the LAN outputs from the Airport to feed the FVS318. Here is what I think I am hearing you say:
Tne reason why the wired and wireless devices are not communicating is because the FVS318G is also a DHCP server and in conflict with the AEBS.
To remedy the situastion here is probably what I need to do in order:
1. Change the LAN IP Address of the Netgear FVS318G to be the same subnet of the Airport Extreme.
2. Then, disable the Netgear FVS318G as a DHCP server.
3. Make sure the ethernet cable from the LAN port of the Airport Extreme connectis to the LAN port of the Netgear FVS318G.
4. Restart everything.
Can you provide me the steps I need to take to get the right IP addresses from the Airport Extreme to put into the Netgear to fix the conflict? I have the Airport Utility. I also have two airport express hot spots, and two Apple TVs in addition to computers attached to the 8 ethernet lines.
Thank you.
Steve

How to connect or weld two points

Similar Messages

Maybe you are looking for