How to consume a TIBCO web-service in SAP PI

Dear All,
I have a scenario to consume a webservice provided by TIBCO.
A end to end scenario is configured in TIBCO (ws-TIBCO-ws). The WSDL file ganerated from TIBCO system is provided to me to consume in SAP PI.
TIBCO generated WSDL will be in a format (Type, Service, Binding, Port, Message). For SAP system to consume a webservice, WSDL format should be (Type, Message, Binding, Port, Service). So i changed the format and imported into External Definitions in ESR and configured the SYNCHRONOUS end-to-end scenario(saop-PI-soap) in SAP PI. I have generated a wsdl from sender agreement and tested it using SOUP UI.
In SOAP UI response it throws following error.

<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
   <SOAP:Body>
      <SOAP:Fault>
         <faultcode>SOAP:Server</faultcode>
         <faultstring>Server Error</faultstring>
         <detail>
            <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
               <context>XIAdapter</context>
               <code>ADAPTER.JAVA_EXCEPTION</code>
               <text>com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIAdapterFramework:GENERAL:com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: Response message contains an errorXIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server did not recognize the value of HTTP Header SOAPAction: .
at com.sap.aii.adapter.soap.web.SOAPHandler.processSOAPtoXMB(SOAPHandler.java:746)
at com.sap.aii.adapter.soap.web.MessageServlet.doPost(MessageServlet.java:505)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:754)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:202)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:103)
at com.sap.engine.services.servlets_jsp.server.servlet.AuthenticationFilter.doFilter(AuthenticationFilter.java:126)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:432)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:210)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:441)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:430)
at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:38)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:81)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:278)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:81)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.SessionSizeFilter.process(SessionSizeFilter.java:26)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:57)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:43)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:475)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:269)
at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:56)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:328)</text>
            </s:SystemError>
         </detail>
      </SOAP:Fault>
   </SOAP:Body>
</SOAP:Envelope>
Also let me know whether we can consume a TIBCO generated WSDL in SAP PI or not (because first we will hit TIBCO endpoint url which in turn internally hits the target system url from TIBCO )
If this is possible, Please provide your valuable inputs
Regards
Koti Reddy

Hi Koti - The soap action is case sensitive.
What is the soap version of the wsdl?
If you try to make a request to a SOAP 1.2 webservice with a SOAP 1.1 request then you may get this error too..
to check the your webservice soap version - open the wsdl and check for the namespace
SOAP 1.1 uses namespace http://schemas.xmlsoap.org/wsdl/soap/
SOAP 1.2 uses namespace http://schemas.xmlsoap.org/wsdl/soap12/
source - http://forum.spring.io/forum/spring-projects/web-services/45083-server-did-not-recognize-the-value-of-http-header-soapaction
please share the wsdl as that may help in providing you more information.

Similar Messages

How to consume the Abap web service in Java web-dynpro

Hi Everyone,
I want to consume ABAP web service in java web dynpro.
so when i tried to create model in java web-dynpro, it gave me an error message saying "Invalid WSDL or WSDL not found".
i think this error message is because, to access the WSDL of abap web-service, we need username and password, but the dialog box in java web-dynpro is not programmed to take username and password from us and send it to the server to get the WSDL.
i came to this conclusion because i was able to successfully test my abap web-service in java portal. the java portal asked me the username and password to open the WSDL.
So, please help me to consume the abap web service in java web-dynpro.
Thanks in advance
Regards
Vikas

Hi Vikas ,
while creating a model in web-dynpro try to use the "import web service model" option and if you are using local server choose the local server option so that you can get the available web services which are in server, select one among them and continue you process.I think this is the some what easy way .
If you want use the URL for wsdl better to once test the available service in server and copy that WSDL URL and paste over WSDL textbox.
I think this is pretty help ful to you
Best Regards
Srikatnh

How to use and configure web services in sap

Hi,
Experts,
could you please tell me, how to configure web services in sap.
As one of my client using handheld software for inventory, where in whatever tansaction happens in the depot it has to update in sap.through non sap software please help me out with necessary configuration.
Thanks
Edited by: Ahmed quadry on Jun 9, 2009 2:25 PM

Hi Ahmed,
Kindly find the below link will helps you to create web service in SAP
http://wiki.open-esb.java.net/Wiki.jsp?page=BAPIWEBSERVICE
Also find the below documents will helps you to create web services in SAP
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/06adbf03-0a01-0010-f386-d8e45561a3c4
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3004a2d2-0653-2a10-779c-f5562b3fac39
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/bb0764f2-0b01-0010-bd85-c7849b40561e
Regards
Venkata Rao .G

How to consume Google REST web service

Dear All,
I have a task to embed Google Maps into web dynpro and/or CRM WebUI.
There is no problem with embedding only map with route on it, but I need also calculated distance.
In WebDynpro I've just created iFrame CHIP component which targets: http://maps.google.pl/maps?output=embed and two CHIPS with import parameters to give source and destination address. Route is calculated and drawn.
Problem is with the distance, because the only way is to consume google web service (which is not SOAP, so I can't use service consumer). It must be something like web request.
URL which I need to access is:
http://maps.googleapis.com/maps/api/distancematrix/xml?&mode=driving&sensor=false&origins=Warsaw&destinations=Hamburg
or
http://maps.googleapis.com/maps/api/distancematrix/json?&mode=driving&sensor=false&origins=Warsaw&destinations=Hamburg
where origins and destinations must be connected with import CHIPS. How to access such service in a proper way?
Second thing is that I have to parse response.. it could be XML or JSON format. I just need summary distance. Any idea?
Btw - I'm quite fresh with WebDynpro and WebUI, so I'm looking for good 'HOW TO' guide. Can you recommend something which is good to start with?
thanks in advance

Hi,
check this reference to start with: [How to integrate google maps in Web Dynpro ABAP|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0bca5ae-3c5c-2d10-938d-a81787f59ace?QuickLink=index&overridelayout=true]
Also this demo by Thomas Jung Sir: [Google Maps: Flash Islands in WDA|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/80f16eef-91ef-2b10-4fb5-d709436f3cc3&overridelayout=true]
hope this helps u.,
@moderators: Don't Close this thread instead move to Web Dynpro ABAP Forum
Thanks & Regards,
Kiran

How to consume a secure web service?

Could someone post me an sample to invoke the certificate based secure web service?
All I have is wsdl, certificate (.pfx file) and password and client jar file. Searching for the sample program to access the secure web service.
I work on weblogic workshop.

Unfortunately, I have just been provided with the endpoint and the SOAP action. Don't have any other details :(

Pointers regarding consuming a external web-service from SAP

Hi All,
I am trying to consume a web-service from an external system using a URL.
Our SAP system version is 4.7. I have created a custom program and calling up the web service using HTTP POST method.
For this I referred the following weblog.
https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/847. [original link is broken] [original link is broken] [original link is broken]
I modified the program according to my requirements and called the web service, but I am facing certain issues.
1. The if_http_client->send method executed successfully (sy-subrc eq 0). But the next call to the method
if_http_client->receive the program shows error.The message is very long one and I am not able to see it fully in debugging mode.
Please help me with the following questions.
1. Is there any way I can read the message returned from the web-service to see what the error was? In 4.7 we don't have the recording function as in 6.0.
2. I have disable the login prompt by calling if_http_client->propertytype_logon_popup = http_client->co_disabled.
If I don't do that it shows me a SAP Web AS login screen. Shouldn't it show me the standard http login screen?
3.In that login screen if I provide my ID password it returns the following message
'Business Server Page (BSP) ErrorBSPexception:Access to URL :<Server>:<80>/ORABPEL/DEFAULT/READDATA1/1.0 is forbidden'
Any pointers what does it mean?
4. This method seems a very lengthy process to me. Is there any other approach to this issue?
TIA
Barada.

The error for Authorization was because of the HTTP proxy settings for the system.
I configured the proxy settings in the transaction SICF->Goto->Http Proxy and then the program worked fine.
Regards
Barada

Calling a SharePoint Web Service from SAP??

Hi Everyone,
I have been following the below link to call a SharePoint Web Service from SAP.
Consuming Microsoft SharePoint Web Services in SAP using Basic Authentication
But after entering the URL this pops up :
and I enter my SAP username and password, then I get this error:
But I have full SAP authorization.
Please can someone advice or help on this problem.
Thank you.

Hi,
It accepts WSDL files, but only using basic authentification. I had the same problem. Probably you have NTLM authentification. Check note 1441809 - Logon fails when using IIS and NTLM authentication
Thanks,
Efren

How to test/consume asynchronous web services in SAP?

Hi,
How do we test/consume asynchronous web services in SAP - either version 4.7 or ECC6.0?
TIA,
Regards
Deepthi

Go through the following link to know how to consume web services using ABAP:
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/media/uuid/20eb3174-41ab-2a10-a383-907faf60eed3|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/media/uuid/20eb3174-41ab-2a10-a383-907faf60eed3]
Regards,
Siva.

How to consume sap xi pi web services or sap RFC with oracle 11g forms.

Dear All
how to consume sap xi pi web services or sap RFC with oracle 11g forms.
or
how to config 11g forms with sap xi....
or how to call sap xi web services in 11g forms....
or can send sample code....
Regards
smfatmi
Edited by: smfatmi on Oct 17, 2011 2:16 AM
Edited by: smfatmi on Oct 17, 2011 2:17 AM

Dear All
how to consume sap xi pi web services or sap RFC with oracle 11g forms.
or
how to config 11g forms with sap xi....
or how to call sap xi web services in 11g forms....
or can send sample code....
Regards
smfatmi
Edited by: smfatmi on Oct 17, 2011 2:16 AM
Edited by: smfatmi on Oct 17, 2011 2:17 AM

Tibco Web Service

Hi All,
My requirement is to consume Tibco web service. they have provided the wsdl file using this i created a model using web service model. I was able to do mappings but while callling, I am getting unknown host exception.
Please let me know what else steps to be done if we want to use a web service. And note that while using the adaptive web service, i am not able to get the model of the web service.
Thanks
Supriya.

Hi,
Following document explains how to use it.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/900bbf94-a7a8-2910-e298-a651b4706c1e
Regards
Ayyapparaj

How to expose a SOAP web service from HCP

Hello All,
Currently I am trying to create a SOAP web service within a HCP Java application to allow backend systems to consume data stored in HCP.
This is the planned scenario:
1. Create data in HCP - therefor I am using JPA and a oData Model.
2. Backend uses web service to consume data from HCP - with this point I do have some problems.. I do want to create a SOAP web service in order to achieve this.
Is there an easy way to create a SOAP web service in HCP? There are many tutorials in the internet of how to create a SOAP web service in 20 sec´s, but non of these helped me. I do was able to consume a SOAP web service in HCP coming from the ByD, but the other way around seems pretty complicated...
Can I make use of the Eclipse functions to create a web service? (New --> Other... --> Web Services --> Web Service and than choose the Button up Java bean Web Service type)
Have any of you some coding snippets that would probably help me out?
I have unsuccessfully tried to use the @WebService, @SOAPBinding, @WebMethod notation in my java classes...
Thank you,
Swen

Hello Nedelcho,
Yes. All the required jar files are in the lib directory.
Currently I am able to create a web service locally.
But when I deploy that to the cloud server my JPA service is not working any more.
Receiving the following error message:
<?xml version='1.0' encoding='UTF-8'?><error xmlns="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata"><code/><message xml:lang="en">javax.naming.NamingException: Error while attempting to resolve reference [Root exception is javax.naming.NamingException: Cannot create resource object instance due to exception in the object factory [Root exception is javax.naming.NamingException: Data source 'jdbc/DefaultDB' not available.]]</message></error>
The web.xml contains the following:
Any advice?
Best regards,
Swen

Timeout when consuming a SOAP web service

Hello,
I'm quite new to Labview and I'm trying to consume a SOAP web service created using a very simple WCF example, but I keep on getting a WebException because of a timeout.
The web service has been created using the example from the WCF getting started tutotial (to keep things simple) http://msdn.microsoft.com/en-us/library/ms734712.aspx
You'll find my .Net solution attached to this message. (You'll have to be administrator to run the service though).
I have used the import web service tool in Labview to create the VI to connect to the web service and all went fine, it created the VI correctly. You'll find the created VI also attached to this message.
Then, I'm trying to create a very simple VI to call the webservice and put the return value inside a numeric indicator. Unfortunately, when I run this VI it crashes with a WebException because of a timeout.
If I run the .Net client, everything goes fine, and if I go to the web service address with a browser, I get the service website, so I know that the server is registered correctly, only Labview can't connect to it for an unknown reason. Everything is setup to connect through localhost:8000, so it can't really be a network problem, I've tried disabling the Windows firewall to see if that was the problem, but it persists.
I've also tried to do something similar using the CDYNE web service, like in the example http://www.ni.com/white-paper/4728/en/, and it works perfectly.
Does anybody have an idea about what could be the issue?
Regards.
Attachments:
WcfTestApp.zip ‏453 KB
_Calculator.zip ‏72 KB

OK, I found the problem myself, it was a problem with the configuration of the WCF service, I was missing the ServiceMetadata endpoint.
For reference, if somebody stumbles upon the same issue as I had, here's a service configuration that works with Labview (using .Net >=4.0)
  <system.serviceModel>
    <behaviors>
      <serviceBehaviors>
        <behavior name="">
          <serviceMetadata httpGetEnabled="true" />
          <serviceDebug includeExceptionDetailInFaults="true" />
        </behavior>
      </serviceBehaviors>
    </behaviors>
    <protocolMapping>
      <add scheme="http" binding="basicHttpBinding" />
    </protocolMapping>
  </system.serviceModel>
And here's how to create and run the service host.
using (ServiceHost selfHost = new ServiceHost(typeof(Calculator), new Uri("http://localhost:8000/Calculator")))
                try
                    selfHost.Open();
                    Console.ReadLine();
                    selfHost.Close();
                catch (CommunicationException e)
                    selfHost.Abort();
                    throw;

Consuming an External Web Service using HTTPS and WS Security

Hello everyone,
I'm having a problem setting the security information in a SOAP header using a generated ABAP Client Proxy to consume an external web service that requires a User ID and Password in the Header section of the SOAP message. I need to use HTTPS. I'm on a WAS 7.01 SP08 system so from my readings, SAP is supposed to be able to add the username and password into the header section of the message. I can't seem to get SAP to add this information added to the header.
Here are the steps that I have taken to set the security values.
1) Created the client proxy from the WSDL in SE80. Basic Authentication on the Configuration tab was turned on automatically.
Note, Transport Security is set to None. I cannot change it.
2) Created an outbound set user name profile in transaction WSPROFILE with the appropriate username and password.
3) Added the profile to the default port in transaction LPCONFIG as an outbound under the WS Security section of the screen.
When I called the external Web Service, I got back the following error message:
com.ibm.wsspi.wssecurity.SoapSecurityException: WSEC5509E: A security token whose type is [http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#UsernameToken] is required.
So, after reading through this Forum, I saw that I needed to use the SOAMANAGER. I set up a Proxy in the SOAMANAGER and manually created the Logical Port. This was the only way I could figure out how to set the Authentication Settings in the Logical Port to "User ID / Password". I then entered the User ID and Password.
However, I am still getting the same error message. I feel I am close but missing some small configuration to tell SAP to use WS Security with a Username token.
I'm not sure what I'm doing wrong, so any help would be appreciated.
Thanks,
Stephen

I had this error again so I thought I would post my solution:
The issue is SAP needs to know the certificates being used by the web site being called. These certificates are automatically installed in your browser but need to be manually installed in SAP. This is what I did:
How to find/install new certificates
Make sure you run Internet Explorer as an Administrator so you can export the certificates
Go to the web site that SAP is trying to call in Internet Explorer
Double click on the lock in the address bar
View certificates
Find the certificates that are being used
Tools --> Internet Options --> Content --> Certificates
Click on the “Trusted Root Certification Authorities” tab
Find the certificate identified in step iii
Export as a CER certificate
Click on the “Intermediate Certification Authorities” tab
Find the certificate identified in step iii
Export as a CER certificate
Go to STRUST in SAP
Import the Certificates in the “Anonymous” or “Standard” SSL client
Save
RESTART the ICM via t-code SMICM <-- Critical!!!
Test

Help: consuming an external web service with user name token

Hello Together!
I need to consume an external web service secured with WS-UserNameToken. The way, how did I do it:
1. I generated a web service consumer (proxy) in SE80 from the wsdl file
2. I created logical port for the consumer in SOAMANAGER
3. I created security profile in WSSPROFILE with telpmate SET_USERNAME and assigned it to consumer operation in LPCONFIG (I use LPCONFIG, because I didn't find any way to do it in SOAMANAGER)
3. I called the web service and got the error back: session token is missing or invalid or has inspired
My questions are:
1. is this possible to consume an external webservice in SAP, which is secured with WS-Usernametoken?
2. do I need therefore any settings in java stack? do I need java stack in general?
3. Is this any way to configure the consumer without writing programs, which set header parameter manually?
4. if the answer on the third question is no, do you have any examples, how to implement session management in report? (I mean sending session id and checking the validaty of id)
I appriciate any help of you!
best regards Anna

Hi,
it should be possible to use WS-UserNameToken for consuming web service. It should be available on AS BAP 7.0 and higher. This profile should be under category Document authentication. You can try to dump a message send from SAP to see what is going out of SAP. This should be supported in ABAP so you don't need a Java stack. What exactly do you want to configure? Do you want to just set user name and password for that service which will be used for any calls of that proxy?
Cheers

How do I invoke a web service?

I'm new to web services... and I have to find a way to connect to the microsoft reporting services web service....
But well I don't know how to connect to a web services...
Can someone direct me to a java tutorial about invoking web services?
Please? =)
Thanks,
Renato Fontes

Enter the string without the quote, then try to switch to the XML view and add the quotes. This should be a workaround for simple values.
You should also be able to generate a java client from JDeveloper in a few clicks, using the Wizard. As you can generate the JUnit template for the proxy (or stub), it's usually faster to re-run your test.
If this does not work for you, can you post the WSDL so we can see if there is any reason it does not work for you.
All the best,
-Eric

How to consume a TIBCO web-service in SAP PI

Similar Messages

Maybe you are looking for