How to convert text captions to text animation?

Hi,
Icreated a few slides with text captions. Now I want to use
text animation with the same text. Can i convert those text
captions to animation text?
Thanks
Jack

This was a double post. The first may be seen by
clicking
here.
Please direct any further responses to the other post.

Similar Messages

How to control text animation duration?

I found a similar question to this in a forum for a different product, but the only answerer didn't know the answer and merely recommended "experimenting around until you figure it out," which is possibly the most unhelpful answer ever. Lol.
My question is: How do I make it so a text animation brings the text in and then allows the text to sit on the screen normally for some time after that? Currently, when I add a text animation, it insists on extending the entire duration of the clip, from beginning to end. How do I confine the animation to, say, the first 2 seconds of the text, and then allow the text to sit normally for 8 seconds after that?

If you are familiar with Keyframing in Flash, then it will be so very easy in PrE. You already have the concept (the hard part), and all you need to get will be details on the mechanics (where buttons are located, etc.) in PrE.
Steve takes you though all of those mechanics, and introduces you to the Effects Control Panel, which you will use just like the Stage in Flash (if they still call it that). The look is a bit different, as you are working in Video, though you are animating in the same way. You set the Keyframes for whichever Effect you are working in, and PrE will create the Tweens for you.
I actually like the interface (the Effects Control Panel) in Premiere better, than I did the one in Flash Studio 8 (my last version), but then I came to Flash from a film background. When I started doing Video, it was like meeting up with an old friend, however the concept of Keyframes from Flash proved very, very useful.
I do not recall the last time that I used any animation Preset, as Keyframes give me so very much more power. The same for creating PiP, whether animated, or not.
Good luck, and explore, experiment and enjoy!
Hunt

How to add text animator to text layer in script?

Hello,
I'm a beginner in scripting and trying to create a script to apply set of expression control and text animator.
I want to add text animator property to selected layer, however I keep having error with the codes below.
selectedLayers[0].Text.Animators.addProperty("ADBE Text Animator");
selectedLayers[0].Text.Animators.addProperty("ADBE Text Position"); //error on this line
What is the correct code?
Thanks a lot.

Thanks Dan, that works!
However, I hit another road block. I tried to add a range selector under the animator group with the codes below and both returned error.
myAnim.property("ADBE Text Animator Properties").addSelector("ADBE Text Range Selector");
myAnim.property("ADBE Text Animator Properties").addProperty("ADBE Text Range Selector");
After reading this post. how to access text proprety
Its seem text animator has different codes for accessing different properties.
I've searched on the Adobe scripting guide and couldn't find the exact code for the property (e.g. ADBE Text Position 3D ).
It would be much appreciated If anyone could recommend a scripting book for After Effects.
Thanks.

How to convert text to outline in photoshop elements 11

I need to give my business card file to my printer to print, and for some reason I cannot find the convert text to shape option (it is not visible under layer-type as all my googling suggests). I basically need to do this as the printer doesnt have my font.
Thanks so much.

That option is one of the many tools provided by the affordable Elements+ add-on:
http://elementsplus.net/
In the Paths section:
http://elementsplus.net/v6/en/path-from-selection.htm

How to convert text to PDF?

Hi,
I have a text file that I would like to create a pdf for it.
is there any function that can convert text to pdf format?
Thanks,
Itay

See the example code :
DATA: it_otf   TYPE STANDARD TABLE OF itcoo,
      it_docs TYPE STANDARD TABLE OF docs,
      it_lines TYPE STANDARD TABLE OF tline,
      st_job_output_info      TYPE ssfcrescl,
      st_document_output_info TYPE ssfcrespd,
      st_job_output_options   TYPE ssfcresop,
      st_output_options       TYPE ssfcompop,
      st_control_parameters   TYPE ssfctrlop,
      v_len_in                TYPE so_obj_len,
      v_language              TYPE sflangu VALUE 'E',
      v_e_devtype             TYPE rspoptype,
      v_bin_filesize          TYPE i,
      v_name                  TYPE string,
      v_path                  TYPE string,
      v_fullpath              TYPE string,
      v_filter                TYPE string,
      v_uact                  TYPE i,
      v_guiobj                TYPE REF TO cl_gui_frontend_services,
      v_filename              TYPE string,
      v_fm_name               TYPE rs38l_fnam.
CONSTANTS c_formname          TYPE tdsfname VALUE 'ZTEST'.
CALL FUNCTION 'SSF_GET_DEVICE_TYPE'
EXPORTING
    i_language    = v_language
    i_application = 'SAPDEFAULT'
IMPORTING
    e_devtype     = v_e_devtype.
st_output_options-tdprinter = v_e_devtype.
*st_output_options-tdprinter = 'locl'.
st_control_parameters-no_dialog = 'X'.
st_control_parameters-getotf = 'X'.
.................GET SMARTFORM FUNCTION MODULE NAME.................
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
    formname           = c_formname
IMPORTING
    fm_name            = v_fm_name
EXCEPTIONS
    no_form            = 1
    no_function_module = 2
    OTHERS             = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
...........................CALL SMARTFORM............................
CALL FUNCTION v_fm_name
EXPORTING
    control_parameters   = st_control_parameters
    output_options       = st_output_options
IMPORTING
    document_output_info = st_document_output_info
    job_output_info      = st_job_output_info
    job_output_options   = st_job_output_options
EXCEPTIONS
    formatting_error     = 1
    internal_error       = 2
    send_error           = 3
    user_canceled        = 4
    OTHERS               = 5.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
.........................CONVERT TO OTF TO PDF.......................
CALL FUNCTION 'CONVERT_OTF_2_PDF'
    IMPORTING
      bin_filesize           = v_bin_filesize
    TABLES
      otf                    = st_job_output_info-otfdata
      doctab_archive         = it_docs
      lines                  = it_lines
    EXCEPTIONS
      err_conv_not_possible = 1
      err_otf_mc_noendmarker = 2
      OTHERS                 = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
........................GET THE FILE NAME TO STORE....................
CONCATENATE 'smrt' '.pdf' INTO v_name.
CREATE OBJECT v_guiobj.
CALL METHOD v_guiobj->file_save_dialog
    EXPORTING
      default_extension = 'pdf'
      default_file_name = v_name
      file_filter       = v_filter
    CHANGING
      filename          = v_name
      path              = v_path
      fullpath          = v_fullpath
      user_action       = v_uact.
IF v_uact = v_guiobj->action_cancel.
    EXIT.
ENDIF.
..................................DOWNLOAD AS FILE....................
MOVE v_fullpath TO v_filename.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      bin_filesize            = v_bin_filesize
      filename                = v_filename
      filetype                = 'BIN'
    TABLES
      data_tab                = it_lines
    EXCEPTIONS
      file_write_error        = 1
      no_batch                = 2
      gui_refuse_filetransfer = 3
      invalid_type            = 4
      no_authority            = 5
      unknown_error           = 6
      header_not_allowed      = 7
      separator_not_allowed   = 8
      filesize_not_allowed    = 9
      header_too_long         = 10
      dp_error_create         = 11
      dp_error_send           = 12
      dp_error_write          = 13
      unknown_dp_error        = 14
      access_denied           = 15
      dp_out_of_memory        = 16
      disk_full               = 17
      dp_timeout              = 18
      file_not_found          = 19
      dataprovider_exception = 20
      control_flush_error     = 21
      OTHERS                  = 22.
IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.

How should convert text file into XML file?

I do a project "WEB SERVER LOG ANALYZER" using JSP. For that i copy the content of log file into the other file . how i convert it into XML file . xplain with coding

Read this [page.|http://www.devx.com/getHelpOn/10MinuteSolution/20356]

How to convert text file into xml file format with and check that with DTD

I have an text file with | seperator . I have to convert this to an xml file and check with DTD present with me..
plz help me out

can i get some code that how to compare the xml with dtd or just give the DTD name with an XML

How to convert text values acceses from jsp page into an xml file?

/* this is the jsp page which i want to convert it into an xml file
please help me , i thank in advance*/
<html>
<head>
<title> xml test</title>
</head>
<body>
<form action="testxml2.jsp" method = post>
<ul>
<li>
<ul>NAME:
<br>
<li>First Name:<INPUT NAME="firstName" TYPE=text SIZE=20><br>
<li>Middle Name:<INPUT NAME="middlename" TYPE=text SIZE=20><br>
<li>Last Name:<INPUT NAME="lastname" TYPE=text SIZE=20><br>
<li>t Name:<INPUT NAME="tname" TYPE=text SIZE=20><br>
</ul>
<br>
<ul>Role:</b><p><input type="radio" name="role" value="buyer">Buyer<p>
<input type="radio" name="role" value="seller">Seller<p>
<input type="radio" name="role" value="thirdparty">Third Party<p>
</ul>
<ul>
Qualification:<br>
<li>Highest Degree:<INPUT NAME="degree" TYPE=text SIZE=20><br>
<li>Percentage: <INPUT NAME="percentage" TYPE=text SIZE=20><br>
</ul>
<ul> Adress:
<li> streetName:<INPUT NAME="street" TYPE=text SIZE=20><br>
<li>cityName:<INPUT NAME="city" TYPE=text SIZE=20><br>
<li>StateName:<INPUT NAME="state" TYPE=text SIZE=20><br>
</ul>
</ul>
<b>
<INPUT TYPE=SUBMIT VALUE="ENTER" >
</body>
</html>

hi there,
In the MCV there is a part about struts, this is a descent way to do this.
how to do it:
create an actionform containing all the properties of the page.
then when you submit your form use an method in the actionforms (that you have written) that makes sets your data in a xml file.
this works very quickely and i use it in production...
you can choose if you want the xml to generaded hard coded or via a parser.
greetings

How to convert text file into xml file

Hi Folks,
I am genarating list of data into text file, but i want to genarate xml file for this text file. How to achive this , please let me know. Thanks.
regards
Vishal

hi Vishal,
Use<b> GUI_DOWNLOAD</b> FM and give the file name as <b>file.xml</b> with BIN Mode....
i.e,
Download internal table to presentation server file(PC)
DATA: ld_filename TYPE string value <b>file.xml</b>,
Pre version 4.7 declaration e_file like rlgrap-filename.
DATA: begin of it_datatab occurs 0,
row(500) type c,
end of it_datatab.
call function 'GUI_DOWNLOAD'
       exporting
            filename         = ld_filename
            <b>filetype         = 'BIN'</b>
       tables
            data_tab         = it_datatab[]
       exceptions
            file_open_error = 1
            file_write_error = 2
            others           = 3.
Regards,
Santosh

How to convert text module language in Smart Form?

Hello Friends,
I want to print a title in chinese language in smartform. How can I do it. Please help me out from this situation?.
Thanks & Regards
Sathish Kumar

Normally when we display stard text , we will be either using "read text" function module or will be using include.To display a strd text in chinese it should be maintained in chinese language (SO10-please see whether Std text is maintained in chinese by giving TEXT name, TEXT ID and Language).and when we use "read text" or "include " we will specify the language also in that.
or u can include the standard text with INCLUDE statement and LANGUAGE <> ..
( LANGUAGE is one of the patameters of the include stmt.)
then the text will get printed in chinese language if it is maintained in chinese language
reward if it helps u...
sai ramesh

How is this text animation created

Hello Everyone,
I am at a loss as to how to create this slightly jittering/flickering text and images as featured in this video:
http://www.youtube.com/watch?v=9GorqroigqM
I'm assuming its either After Effects or Flash Professional but I have also seen this effect in Lower Thirds and Intro to Television Shows such as "Chasing New Jersey" Any assistance would be helpful. Thanks.
Refined_Silver

Refined_Silver wrote:
I'm assuming its either After Effects or Flash Professional but I have also seen this effect in Lower Thirds and Intro to Television Shows such as "Chasing New Jersey"
After Effects is often used to create lower thirds and TV show intros.
I can't see your example due to restrictions on the network where I work, but you might look into AE's quite powerful text animators.

How to convert text values in a popup menu to numerical values?

Hi there,
I am trying to create a table in Numbers where one cell needs to have a numerical value inserted into it based upon the value chosen in a popup menu in another cell, and I'm not sure how to go about it.
To be more specific, I have a cell containing a popup menu with the items "Bronze", "Silver", "Gold" and "Platinum". Depending on which value is chosen, I need another cell to be populated with a value of 1,1.5,2 or 2.5 respectively, as I will then use this value to perform a multiplication elsewhere in the table. I have tried using the IF function in the 2nd cell but I can only get that to match one value and not an array of values.
Could anybody advise on the most effective way of accomplishing what I am trying to do?
Many thanks in advance.

Michael Quayle wrote:
(1) Hopefully you're not looking for points for being helpful, because all you're doing here is patronising me from the looks of it.
"The fact to be a newbie doesn't prevent someone to have a quick look, at least to the list of available functions, to know what may be done with the tool."
(2) This was *obviously* the first thing I did, followed by a Google search. When those avenues were exhausted I tried here. However, like I said, having "a quick look" is useless if you are not familiar enough with spreadsheets to know what it is you are looking for! MY choice of language to describe what I was trying to achieve was obviously not compatible with any search I performed, which is why I had to resort to asking a person rather than a manual. And frankly, the language used within the documentation is often rather alien to me. Having read the documentation for VLOOKUP I still don't fully understand its application. I'm a musician for heaven's sakes - everybody knows we can't read!
"The users guides were designed to help users, not to help helpers to help users "
(3) Are all your posts this condescending? I came here to ask a question, not to be accused of being lazy and not reading documentation. Like I said, my own searches through the manual were fruitless, so I came here for help. Are all the responses on this forum so cold and terse?
(1) Don't worry, I'm not here to grab points.
(2) Searching in the existing threads with the available tool seems more logical than searching in Google.
(3) I write what I want, the way I want.
In the cell C2 of the main table, the formula is :
=IF(ISBLANK(B2),"",VLOOKUP(B2,vlook_up :: A:B,2,FALSE))
Apply fill down to fill other cells.
Yvan KOENIG (VALLAURIS, France) jeudi 4 août 2011 12:55:03
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

How to make text animation like this one?

http://www.youtube.com/watch?v=IHvZt_XPTLc
I want to create something like that, of course a lot simpler. I opened up Motion today but it looks different compare to Adobe Flash. How should I get start? Can someone tell me what I need to do first? Or please explain the keyframe thing please? Thank you so much!

There are quite a few YouTube tutorials out there (including some ripped directly from my book) - there are also other resources listed in the thread I linked. Almost anything that can be done in After Effects can be done in Motion, but you need to know Motion well enough to translate.
A big difference with Motion over AE is that Motion gives you behaviors - want something to move across the screen? Apply a throw behavior, want it to spin? Apply a spin behavior. Etc...
Not to mention all the projects that you can find in these very discussions...
Patrick

How can I convert text to PDF in the new "Pages" without losing info.

How can I convert text to PDF in the new "Pages" without losing a lot if information?

Select Export To from Pages' File menu, then select PDF from the sub-menu.

How to remove text from .swf animation?

how to remove text from .swf animation? Can no find this text
in fla file. Flash 8.

exactly what 'text' are you referring to? text that you typed
on the Stage using the 'textTool'? simply select the text with the
'arrowTool' and hit delete.
If you are referring to a textField that you want to
eliminate after a certain amount of time, within your animation
sequence. first copy the text, create a new layer, paste the text
in place, then where you want to have the text 'disappear' insert a
'blank keyframe' at that point in the text layer.
OR place the textfield within a MC and remove it with code.
OR if the text is dynamic and you wish to use the position at a
later time, pass a value of null or and empty string to the field
at the point you wish. And there are other ways still. :) hope one
of these works for you.

How to convert text captions to text animation?

Similar Messages

Maybe you are looking for