How to copy data of a table to the same but on a DIFFERENT MACHINE?

Hello experts,
I want to copy all entries of table TE422 to the same, but on a different machine. I created a transport request (workbench request using TABU) intending to copy the entire table data from QA into DEV environment.
However, this is not working, because, in our installation, QA is on one server, and DEV on another! So, in a way, each machine seem to be transparent to the other and I cannot, or, do not know, how to specify the DEV environment as target.
I was told that I have to do something at the OS level. That is to say, have some kind of SQL query which collects data from one and uploads it onto the other.
Now my question is: Is there a SAP way to do this, that is to say, forget the SQL thingy and do it with some SAP transaction? If yes, how? If not, do you have a sample code which does this please?
Your help is greatly appreciated.
Goharjou

Method 1:
You can transport using ALE/IDOC, Write a simple outbound function moule in Source System and Develop a Inbound function module in target system.
Method 2:
Download the entire table contents into a flat file from source system by developing a simple report using WS_DOWNLOAD function module. Then Develop a report using WS_UPLOAD in target system and upload thd flat file.
Thanks & Regards,
Vijay

Similar Messages

How to acquire data from 2 chs of the same DAQ card at different sampling rate

I am using single DAQ card (either 6013 or 6014) in my system i want to acquire data from 2 (or more) channels with following requirements
1. sampling rate of each channel should be independant of each other (say one is 20 Hz and other is 15 kHz)
2. data from all the channels should be acquired simultaneously.
3. coding must be done using DAQmx VIs
I have tried out following things
1. I created separate task for each channel: i found out that two tasks can not run simultaneously even though the channels are different
2. I tried out single task with two channels included in it. and i used 'channels to Read' property to determine from which ch. i want to acquire data: this method works fine if the sampling rates are same. but if i change the sampling rate of one channel it gets reflected in other channels as well.
can somebody help me out to solve this problem.
i will appreciate if somebody can post the sample code as my deadline is approaching
Tushar Jambhekar
[email protected]
Jambhekar Automation Solutions
LabVIEW Consultancy, LabVIEW Training
Rent a LabVIEW Developer, My Blog

Hi Dennis Knutson
Thanks for your suggestion.
Tushar Jambhekar
[email protected]
Jambhekar Automation Solutions
LabVIEW Consultancy, LabVIEW Training
Rent a LabVIEW Developer, My Blog

How to copy data from transparent table to our own ceated z table?

How to copy data from transparent table to our own ceated z table?
Plz tell me different methods and which one is best?
Is get data from sflight into table z* is correct?

Hi Ajay,
let us consider you have to copy EKKO table to ZEKKO table
1. In ABAP program define internal table based on EKKO
 eg: i_ekko
2. Select the data from EKKO to i_ekko
 eg: select * from ekko into table i_ekko.
3. insert into Z-TABLE from the internal table
 eg: INSERT EKKO FROM TABLE I_EKKO.
 COMMIT WORK.
To insert in internal table you can use the following:
1. INSERT [wa INTO|INITIAL LINE INTO] itab [INDEX idx].
2. INSERT [wa INTO|INITIAL LINE INTO] TABLE itab.
3. INSERT LINES OF itab1 [FROM idx1] [TO idx2] INTO itab2 [INDEX idx3].
4. INSERT LINES OF itab1 [FROM idx1] [TO idx2] INTO TABLE itab2.
To inert in database table, use the following:
1. INSERT INTO <dbtabname> [CLIENT SPECIFIED] VALUES wa.
2. INSERT <dbtabname> [CLIENT SPECIFIED] FROM TABLE itab.
3. INSERT <dbtab> [CLIENT SPECIFIED]. oder
4. INSERT <dbtabname> [CLIENT SPECIFIED] ... .
Reward points.. if helpful.
Cheers !
Moqeeth.

How to send data from internal table to the shared folder in ABAP

Hi experts,
My requirement is to transfer data from a file to shared folder. i just did reading data from a file to a internal table. Now i want to send this internal table data into a shared folder which is "
xxx\y\z....".
I do not have any idea on how to send data from internal table to the shared folder path.
can anybody please help me out how to do this?
Thanks & Regards
Sireesha.

Where that folder is located, its on presentation server i.e. desktop or application server.
If its on presentation server, use FM GUI_UPLOAD.
If its on application server, then use DATASET functions. Have a look at below link.
[File Handling in ABAP|http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3ca6358411d1829f0000e829fbfe/frameset.htm]
I hope it helps.
Thanks,
Vibha
Please mark all the useful answers

I want to get the data of a table inside the Form but it is not passed

I want to get the data of a table inside the Form but it is not passed to the form by tables parameters.
How can I do this.
Regards

If there is a problem with defining it globaly, you can define a field symbol globably and point to it. For example. It would probably be better to define your table globably.
report zrich_0003 .
field-symbols: <imarc> type marc_upl_tt.
start-of-selection.
perform get_data.
* FORM get_data *
form get_data.
data: imarc type table of marc with header line.
select * from marc into table imarc up to 10 rows.
assign imarc[] to <imarc>.
perform write_data.
endform.
* FORM write_data *
form write_data.
data: xmarc type marc.
loop at <imarc> into xmarc.
 write: / xmarc-matnr, xmarc-werks.
endloop.
endform.
Regards,
Rich Heilman

Data from two tables in the same row in XML transformation

Hi,
I am using XML transformation for generating excel file which is to besent as email attachment.
Here I want to display the data from two internal tables in the same row in the excel. .I am using <tt:loop ref=".<table name>"> ... </tt:loop> for looping through the table. Can I loop two table simultaneously ? In that case how will I specify the fields in each table . Some of the fields in two tables are of same name and type.
Please help...
Thanks,
Jissa

Hello Brian,
Thank you for your answer. It is approach I will use, I think. However let me ask: Would it be possible to have a Version in this layout, too? I mean to see, which value comes from Version A and which comes from Version B? Something like this:
Calendar Month Version Sales Amount
2011.01 B 200
2011.02 B 300
2011.03 A 260
2011.04 A 230
2011.05 A 200
A

How to insert into two differents tables at the same time

Hi
I'm newer using JDev, (version 3.1.1.2 cause the OAS seems to support just the JSP 1.0)
and I want to insert into two differents tables at the same time using one view.
How can I do that ?
TIA
Edgar

Oracle 8i supports 'INSTEAD OF' triggers on object views so you could use a process similar to the following:
1. Create an object view that joins your two tables. 'CREATE OR REPLACE VIEW test AS SELECT d.deptno, d.deptname, e.empname FROM DEPT d, EMP E'.
2. Create an INSTEAD OF trigger on the view.
3. Put code in the trigger that looks at the :NEW values being processed and determines which columns should be used to INSERT or UPDATE for each table. Crude pseudo-code might be:
IF :NEW.deptno NOT IN (SELECT deptno FROM DEPT) THEN
INSERT INTO dept VALUES(:NEW.deptno, :NEW.deptname);
INSERT INTO emp VALUES (:NEW.deptno, :NEW.empname);
ELSE
IF :NEW.deptname IS NOT NULL THEN
UPDATE dept SET deptname = :NEW.deptname
WHERE deptno = :NEW.deptno;
END IF;
IF :NEW.empname IS NOT NULL THEN
UPDATE emp SET empname = :NEW.empname
WHERE deptno = :NEW.deptno;
Try something along those lines.
null

How to avoid purchasing multiple things that are the same but different titles

How can I avoid purchasing multiple things that are the same but have multiple names but is the same purchase for the same use?

"Things"? What things? Apps for keeping track of when to change cat litter? 30 different versions of "twinkle, twinkle little star" played by everything from punk rockers to Gregorian chant? Videos on the best way to make Christmas cake?

How to copy data from one table to another (in other database)

Hi. I would like to copy all rows from one table to another (and not use BC4J). Tables can be in various databases. I have already 2 connections and I am able to browse source table using
ResultSet rset = stmt.executeQuery("select ...");
But I would not like to create special insert statement for every row . There will be problems with date formats etc and it will be slow. Can I use retrieved ResultSet somehow ? Maybe with method insertRow, but how, if ResultSet is based on select statement and want to insert into target table? Please point me in the right direction. Thanks.

No tools please, it must be common solution. We suceeded in converting our BC4J aplication to PostgreSQL, the MSSQL will be next. So we want to write simple aplication, which could transfer data from our tables between these 3 servers.

How to copy data between two tables row by row

Hi All,
I have three tables TableA and TableB and TableC
I wanted to write a stored procedure to copy data row by row from TableA to TableB and then update TableC by replacing any record that has the old id (before copying) to the new id after copying the data.
here is the steps
iterate throw all the rows in tableA ( probably with a foreach)
in each iteration we will do the following:
Get current ID (identity) for each record in TableA ( will call it @oldID)
Insert the row in TableB
Get the new ID for the row from TableB will call it (@NewID)
find rows in tableC that has the (@oldID)
replace all ids in tableC with @oldID to @NewID
Thanks in advance

0
TableA and TableB are identical they should have the same columns
TableC columns will be ( ID, TableA_ID , Notes)

Copying data from a table in the Database to an internal table.

Hello,
How do I copy data that is a table that is in the database and and then load the data to an internal table in the ABAP/4 Aditor.
Please help.

hi,,
do this way ...
tables : mara.
parameters : p_matnr like mara-matnr,
start-of-selection.
select <fields> from mara into table it_mara
where matnr = p_matnr.
if sy-subrc = 0.
endif.

How to display data from internal table in the SELECTION-SCREEN

Hello Experts,
My requirement is to display the data's from an internal table in the selection screen. I tried using selection-screen comment. But it is working only for a single record. Can anyone please tell me how to do this?

Hi Ritika,
we cant use write statement inside selection-screen.
see my coding.
SELECTION-SCREEN BEGIN OF SCREEN 123 AS WINDOW TITLE TEXT-456.
SELECTION-SCREEN BEGIN OF BLOCK BL1 WITH FRAME TITLE TEXT-BL1
 NO INTERVALS.
 SELECT-OPTIONS SEL1 FOR SY-DATUM.
 PARAMETERS PAR1(10).
** I WANT ALL RECORDS FROM AN INTERNAL TABLE HERE ONLY
 SELECTION-SCREEN END OF BLOCK BL1.
SELECTION-SCREEN PUSHBUTTON 2(10) but1 USER-COMMAND cli1.
SELECTION-SCREEN PUSHBUTTON 20(10) but2 USER-COMMAND cli2.
SELECTION-SCREEN END OF SCREEN 123.

How to copy data from one transaction to the next (F-43)

All,
I have a situation where it appears the due date of an invoice is being copied from a previous invoice entry. Can anyone tell me is there a process where the user can have data default from one invoice to the next and if so is the due date (planning date) one of those fields?
Thanks
Sandra

I understand how it is supposed to work. However, I have production examples of that not happening and I'm trying to figure out how. The only way I have been able to replicate the issue is when I manually enter the due date when entering the invoice the calculation of baseline date + #of days does not happen. Users say they are not manually entering a date so I'm trying to find a way the date could be entered without the users knowledge.
Regards
Sandra

How to acquire data from multiple dataports at the same time

Hi,
I studied the multithreading section of Labview, but still have no idea
how to make it work. Let me briefly explain my situation. I need to
develop a program that can control and acquire data from 4 serial
ports. I have 4 buttons to control starting or stopping acquisation
from the corresponding port. Every acquisation process is a while loop.
How can I start a new acquisation loop (eg. from COM2) while the loop
for COM1 is still running? In other words, I wish the 4 loops running
independently, and are controlled by their corresponding buttons only.
Thanks for any suggestion.
Jin

Hi Anonymous,
If I were you, I'd create one VI (call it Port.vi) to listen to one port - then make it reentrant. Drop 4 copies of Port.vi on your Main diagram. Port.vi inputs could include a VISA reference, a "Start/Stop" notifier and maybe a "Quit" occurance. Wire to each copy of Port.vi a unique VISA reference and a unique "Start/Stop" [boolean] notifier - let all the copies share the same Quit Occurance.
In Main, have one event case for each of your stop buttons. When a button is pressed, send the appropriate Start/Stop notifier!
... of course you could accomplish the same thing with four identical loops right in your main diagram, but the more complex the port-handling gets, the easier it will be to manage in one place instead of four.
Cheers!
When they give imbeciles handicap-parking, I won't have so far to walk!

HOW TO IMPORT DATA MORE THAN ONCE FROM THE SAME EXPORT DUMP FILE?

before asking my question i'd like to mention that i'm a french spoke...
so my english is a little bit bad. sorry for that.
my problem is : IMPORT
how to import data a SECOND TIME from an export dump file within oracle?
My Export dump file was made successfully (Full Export) and then i
tried to import datas for the first time.
I got this following message in my logfile: I ADDED SOME COMMENTS
Warning: the objects were exported by L1, not by you
. importing SYSTEM's objects into SYSTEM
REM ************** CREATING TABLESPACES *****
REM *********************************************
IMP-00015: following statement failed because the object already exists:
"CREATE TABLESPACE "USER_DATA" DATAFILE 'E:\ORANT\DATABASE\USR1ORCL.ORA' SI"
"ZE 3145728 DEFAULT STORAGE (INITIAL 10240 NEXT 10240 MINEXTENTS 1 MAX"
"EXTENTS 121 PCTINCREASE 50) ONLINE PERMANENT"
IMP-00015: following statement failed because the object already exists:
"CREATE TABLESPACE "ROLLBACK_DATA" DATAFILE 'E:\ORANT\DATABASE\RBS1ORCL.ORA"
"' SIZE 10485760 DEFAULT STORAGE (INITIAL 10240 NEXT 10240 MINEXTENTS "
"1 MAXEXTENTS 121 PCTINCREASE 50) ONLINE PERMANENT"
etc........
IMP-00017: following statement failed with ORACLE error 1119:
"CREATE TABLESPACE "L1" DATAFILE 'E:\ORADATA\L1.DBF' SIZE 1048576000 "
"DEFAULT STORAGE (INITIAL 10240 NEXT 10240 MINEXTENTS 1 MAXEXTENTS 121 PCTIN"
"CREASE 50) ONLINE PERMANENT"
IMP-00003: ORACLE error 1119 encountered
ORA-01119: error in creating database file 'E:\ORADATA\L1.DBF'
ORA-09200: sfccf: error creating file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified
--->etc..........
the drive E: with the folder E:\ORADATA didn't exist, but after
all that i created it.
see below, before my IMPORT statement
REM ********************* CREATING USER *********
REM ********************************************
IMP-00017: following statement failed with ORACLE error 959:
"CREATE USER "L1" IDENTIFIED BY VALUES 'A6E0DAA6865E7627' DEFAULT TABLESPACE"
" "L1" TEMPORARY TABLESPACE "TEMPORARY_DATA""
IMP-00003: ORACLE error 959 encountered
ORA-00959: tablespace 'L1' does not exist
IMP-00017: following statement failed with ORACLE error 959:
"CREATE USER "MLCO" IDENTIFIED BY VALUES '56AC6447B7D50467' DEFAULT TABLESPA"
"CE "MLCO" TEMPORARY TABLESPACE "TEMPORARY_DATA""
IMP-00003: ORACLE error 959 encountered
ORA-00959: tablespace 'MLCO' does not exist
ETC.......
REM ********************* GRANTING ROLES ***********
REM ************************************************
IMP-00017: following statement failed with ORACLE error 1917:
"GRANT ALTER ANY TABLE to "L1" "
IMP-00003: ORACLE error 1917 encountered
ORA-01917: user or role 'L1' does not exist
ETC.........
IMP-00017: following statement failed with ORACLE error 1918:
"ALTER USER "L1" DEFAULT ROLE ALL"
IMP-00003: ORACLE error 1918 encountered
ORA-01918: user 'L1' does not exist
-- that is normal, since the creation of the
tablespace failed !!
REM******************************
IMP-00015: following statement failed because the object already exists:
"CREATE ROLLBACK SEGMENT RB_TEMP STORAGE (INITIAL 10240 NEXT 10240 MINEXTENT"
"S 2 MAXEXTENTS 121) TABLESPACE "SYSTEM""
IMP-00015: following statement failed because
. importing SCOTT's objects into SCOTT
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "EVT_PROFILE_SEQ" MINVALUE 1 MAXVALUE 999999999999999999999"
"999999 INCREMENT BY 1 START WITH 21 CACHE 20 NOORDER NOCYCLE"
ETC............
importing L1's objects into L1
IMP-00017: following statement failed with ORACLE error 1435:
"ALTER SCHEMA = "L1""
IMP-00003: ORACLE error 1435 encountered
ORA-01435: user does not exist
REM *************** IMPORTING TABLES *******************
REM ****************************************************
. importing SYSTEM's objects into SYSTEM
. . importing table "AN1999_BDAT" 243 rows imported
. . importing table "BOPD" 112 rows imported
. . importing table "BOINFO_AP" 49
ETC................
. . importing table "BO_WHF" 2 rows imported
IMP-00015: following statement failed because the object already exists:
"CREATE TABLE "DEF$_CALL" ("DEFERRED_TRAN_DB" VARCHAR2(128),
IMP-00015: following statement failed because the object already exists:
"CREATE SYNONYM "DBA_ROLES" FOR "SYS"."DBA_ROLES""
IMP-00015: following statement failed because the object already exists:
"CREATE SYNONYM "DBA_ERRORS" FOR "SYS"."DBA_ERRORS""
IMP-00008: unrecognized statement in the export file:
. importing L1's objects into L1
IMP-00017: following statement failed with ORACLE error 1435:
"ALTER SCHEMA = "L1""
IMP-00008: unrecognized statement in the export file:
J
Import terminated successfully with warnings.
-------------------------------------b]
So after analysing this log file, i created
the appropriate drives and folders... as the
import statement doesn't see them.
E:\ORADATA G:\ORDATA etc...
And i started to [b]IMPORT ONE MORE TIME. with:
$ IMP73 sys/pssw Full=Y FILE=c:\temp\FOLD_1\data_1.dmp BUFFER=64000
COMMIT=Y INDEXFILE=c:\temp\FOLD_1\BOO_idx.sql
LOG=c:\temp\FOLD_1\BOO_log.LOG DESTROY=Y IGNORE=Y;
after that i could not see the users nor the
tables created.
and the following message appeared in the log file:
Warning: the objects were exported by L1, not by you
. . skipping table "AN1999_BDAT"
. . skipping table "ANPK"
. . skipping table "BOAP"
. . skipping table "BOO_D"
ETC.....skipping all the tables
. . skipping table "THIN_PER0"
. . skipping table "UPDATE_TEMP"
Import terminated successfully without warnings.
and only 2 new tablespaces (originally 3) were
created without any data in ( i check that in
the Oracle Storage manager : the tablespaces exit
with 0.002 used space; originally 60 M for each !!)
so,
How to import data (with full import option) succefully
MORE THAN ONE TIME from an exported dump file ?
Even if we have to overwrite tablespaces , tables and users.
thank you very much

The Member Feedback forum is for suggestions and feedback for OTN Developer Services. This forum is not monitored by Oracle support or product teams and so Oracle product and technology related questions will not be answered. We recommend that you post this thread to the appropriate Database forum.
The main URL is:
http://forums.oracle.com/forums/index.jsp?cat=18

How to copy data of a table to the same but on a DIFFERENT MACHINE?

Similar Messages

Maybe you are looking for