How to copy DB files from UNIX filesystem to ASM in RMAN?

Hi,
I have a cold backup copied from a RAC ASM by using RMAN to UNIX filesystem. I made it like this:
RMAN> run
copy datafile 1 to '/backup/PDAMLPF2/offline/system.306.715096785';
copy datafile 2 to '/backup/PDAMLPF2/offline/undotbs1.260.715096755';
Now, I need to restore (or copy) this cold backup into another RAC ASM system to create a DB. How can I do the copy back?
Thanks for advise!

If you are using 11.1 or above you can use asmcmd cp command otherwise use dbms_file_transfer package. But keep in mind that since you are not using RMAN in any of those stages you will need to modify controlfile anyhow.
Regards,
Husnu Sensoy

Similar Messages

  • Does anyone know how to copy my files from my ipod to a different computer?

    Does anyone know how to copy my files from my ipod to a different computer? I tried to do it, but all that it did was erase my files. What i want to to is use my ipod to transfer my files to another computer (which has itunes as well) PLEASE help!

    You will need to enable your iPod for disk use. Then, you should see your iPod in "My Computer" and you can open up your iPod's folder there and drag the files into it. You can store the files on the iPod, then connect it to the other computer and drag-and-drop them from the iPod into the designated directory in that computer. Make sure individual files are not larger than 4 GB.

  • Unix command to create a copy of file from unix directory

    Hi guys,
    what is the Unix command to create a copy of file from unix directory?
    Thanks a lot!

    If you haven't noticed, this is a ABAP forum.
    You can go to the UNIX thread instead and post it there,
    SAP on UNIX
    You can expect answers there

  • How to copy pdf files from computer to ipad

    how to copy pdf files from computer to ipad

    You can PDFs to the iPad, but first you need one or more apps on the iPad that supports PDFs - unlike a 'normal' computer the iPad doesn't have a file system, and everything on it has to be associated with an app.
    Options include free apps such as Apple's iBooks app and also Adobe Reader - and paid-for apps such as GoodReader (which also supports read-only of other documents types).
    For iBooks you can first add the PDFs to your computer's iTunes via File > Add To Library, and you can then sync them by selecting the iPad on the left-hand sidebar of your computer's iTunes (on iTunes 11 you can enable the sidebar via option-command-S on a Mac, control-S on a PC) and using the Books tab on the right-hand side to select and sync them.
    For Adobe Reader adnd GoodReader you can use the file sharing on the Apps tab on the right-hand side to copy them over : http://support.apple.com/kb/ht4094

  • How to copy a file from one folder to another folder in Linux

    Hello everyone,
    Oracle forms 11g 11.1.2.0.0
    OS: Oracle Linux
    We use webutil to upload files to the application server from the client machine, and stores them in a folder named JOB_DOCS on the application server (This folder is created as a databse directory too). File types are JPEG, GIF, PDF, TXT, BMP, DOC, XLS etc...
    At a later stage when the user tries to view the uploaded documents, this was not getting displayed on the screen
    on our windows server, when the user clicks on the print button we copy the file from the JOB_DOCS folder to the forms\java folder using the below command
    HOST('COPY ' ||d:\JOB_DOCS\test.pdf||' '||'c:\oracle\middleware\as\forms\java\test.pdf ,NO_SCREEN);
    once the file is under the forms\java folder then it is getting displayed on the screen to print or save, and later we remove the file from forms\java folder.
    But my problem here is, recently we have installed our application on Oracle Linux server, and we have JOB_DOCS folder there, and the users can upload files to this folder also. How can we copy the file test.pdf from JOB_DOCS to forms/java in linux?
    And what could be the reson for the document cannot be accessed from the folder where it is saved? We tried giving folder permissions, adding the folder to PATH variable etc.

    For copying and moving directories you can use the cp and mv commands just like you use them with files. Yeah, I know. If you've already tried to copy a directory with cp, you've probably noticed that cp just complains at you. Probably it says something like cp: omitting directory yadda yadda. You see, the cp command wants you to use the -r option if you want to copy a directory with its contents. The -r means "copy recursively":
    $ cp -r dir1 dir2
    The above creates a directory named dir2 whose contents will be identical to dir1. However, if dir2 already exists, nothing will be overwritten: the directory dir1 will be copied into the dir2 directory under the name dir2/dir1.
    When renaming directories, you use the mv command exactly the same way as with files:
    $ mv dir1 dir2
    When dealing with directories, mv works a bit like cp does. If dir2 doesn't exist, the above will rename dir1 to dir2, but if dir2 exists, the directory dir1 will be moved into the dir2 directory under the name dir2/dir1.
    ref http://www.tuxfiles.org/linuxhelp/dirman.html

  • How to copy a file from one location to another ???

    Hi,
    I have a file ('D:/Pictures/1.jpg') and I want to copy this 1.jpg file to a location called 'D:/Folder1'. I tried the WebUtil_File.copy_file function, but it does not work. it returns false boolean.
    I am using windows xp and oracle 10g.
    The webutil configurations are also completed.
    This D: drive is the one which has oracle 10g application server installed.
    Am I doing anything wrong or missed?. I need to complete this urgently. but it does not work.
    Or any other way to copy a file from one place to given any path?. After this I have to renaming (may be using Rename_File function) the copied file. Please advice me.

    An alternative could be HOST command, that calls OS prompt to run a command in the server and then return the focus to the Forms:
    HOST ('copy D:/Pictures/1.jpg D:/Folder1/1.jpg');
    Edited by: Kleber M on Sep 9, 2011 12:38 PM

  • How to copy a file from application server to local system

    Guys,
    Need to copy a file from application server to local system.Is there an FM for the same.
    Tried searching for it but couldn't find anything useful.
    Code snippets will be highly appreciated.
    Warm Regards,
    P.
    Moderator message: very frequently asked and answered question, obviously you did not search thoroughly, all points removed.
    Edited by: Thomas Zloch on Dec 3, 2010 4:48 PM

    hi,
    You can use the transactions CG3Y or through program u can do like this..
    DATA: BEGIN OF IT_FILE OCCURS 0,
                    LINE TYPE STRING,
               END OF IT_FILE.
    OPEN DATASET <file_name>  FOR INPUT IN TEXT MODE ENCODING DEFAULT.
            IF SY-SUBRC IS INITIAL.
              DO.
                READ DATASET<file_name> INTO IT_FILE-LINE.
                IF SY-SUBRC = 0.
                  APPEND IT_FILE.
                  CLEAR IT_FILE.
                ELSE.
                  EXIT.
                ENDIF.
              ENDDO.
            ENDIF.
    CLOSE DATASET <file_name>.
    Download it to local system using  FM - GUI_DOWNLOAD

  • How to copy a file from one PC to another in ABAP program

    Hello Friends,
    I have a requirement where I have to copy a file from a central location ( central servers like
    inblr102 or
    dwdf ) and save it on local PC in ABAP code. Also, while saving it should ask for the path on PC. Can any of you please help me in this?
    Thanks in advance!
    Divya

    Hi,
    Check out this link. This deletes file,  probally you will get some hint to copy.:
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/abap/deleting%252bfile%252bfrom%252bwindows
    Thanks,
    Krishna

  • How to copy archivelog-files from a ASM instance to another ASM instance

    Hello ,
    our RAC database has to be moved to another Datacenter. The database has a size of several Terrabyte. Will will create a standby database (on a cluster) on the new datacenter (using RMAN backup). Since the RMAN backup takes rather long we would like to copy the archive logs to the new datacenter. Since the archivelog-files are stored on a dirskgroup of an asm instance we have the following question:
    - how can the archivelog files get copied from the current location to the new location?
    Rgds
    Jan

    VivaLaVida wrote:
    Many thanks for your answer...
    As a matter of fact the archivelogs are not backuped on a filesystem. If so we would copy them from the source to the destination host (that's easy).
    The question is "how to get them copied from one ASM diskgroup to another ASM diskgroup". RMAN might be a good solution - but we would need to
    figure that out...
    We talking about 100 GB of archivelogs a day - therefore we don't want to wait until the standby database is configured and online. To have the archivelogs
    already on the new host in the new datacenter would save alot of time.What is ASM version?
    The copy is peer to peer? (i.e Can you copy files from one ASM to another directly?)

  • How to copy a file from Client to Application Server

    Hello,
    My requirement is user selects a file from Browse button on oracle form - this location is on client side, and have to copy this file on Application server.
    I tried using webutil_file.copy_file function but it gives error - copy_file is not a procedure or is undefined.
    There is another way of Client_to_AS but it needs some changes in configuration files of webutil, which is not allowed in our scenario.
    Source - client machine resident file
    Target- Application server disk location
    So can any one help in this regard?

    Hi Francois,
    Thanks for your suggestion, actually i didnt want to use Client_to_As as client doesnt want to make any changes in any configuration files, no matter how small the change is.
    Anyways we are able to successfully copy the file using Client_to_AS, but one thing that i couldn't understand is why was our webutil_file.copy_file function failing?
    Any hint about this?
    Thanks!
    Avinash.
    Pune- India.

  • How to display HTML file from Unix server on UI at runtime

    Hi Experts,
    My requirement is to display  HTML files,  related to some particular person, on UI. The file is existing on a separate UNIX server and a file related to one person may have a lot of attached files as well , as is the case generally with HTML files, including pictures etc. So it is no use transferring file on my CRM system, as the files are kept separately on this UNIX server which is particularly for this kind of storage.
    I am able to show files residing on MIME repository ( I created some new HTML files )  of my CRM system on UI. but I don't know how to go ahead with this particular requirement.
    One idea is that I can map one folder of my application server to that unix server so that I can see the HTML files in this particular folder. but I don't know how to map MIME repository folder to application server directory or directly to the UNIX server .
    Please advise. Is my approach correct or is there any other way ?
    thanks in advance.
    Regards,
    Vikas

    Maybe this is too simple, but have you got an HTTP server on the UNIX machine? You could simply link the URL into you CRM application and display the contents directly from UNIX.
    cheers Carsten

  • How to copy a file from a folder on macbook pro

    ive been trying to copy a file (a video file) from my finder to my external hard drive, drag it and stuff, but i keep getting this forbidden sign.
    i'd love to get some help.
    thanks.

    Hi,
    Normally this happens if the hard drive is either formatted in an incompatible format (like NTFS which is read only) or if you do not have permissions to write to the hard drive.
    You can check the format in disk utility by selecting the external hard drive partition in the left and then down the bottom it will show the format. It should either be Mac OS Extended (Journaled) or MS-DOS FAT. If it is not you will need to erase the drive to format it.
    You can check the drive permissions by right clicking (control clicking) the icon for the external hard drive, and selecting "Get Info". down the bottom in sharing and permissions, check the box that says "Ignore Ownership"
    Hope this helps.

  • How to copy .gif files from one dir to another using runtime.exec

    hello sir/madem,
    i want to copy some gif and jepg files from one directory to another dir using swing.
    when i tried with using runtime.exec(String[]) i am getting the following error.
    anybody please tell me what is the problem in my program
    java.io.IOException: CreateProcess: ren c:/windows/desktop/copy.java c:/windows/
    cc.java error=0
    code:
    public class copy
         public static void main(String[] args)
              try{
                   String s[]=new String[3];
                        s[0]="ren";
    s[1]="c:/windows/desktop/copy.java";
    s[2]="c:/windows/cc.java";
              Runtime rt=Runtime.getRuntime();
    Process p=rt.exec(s);
              int i=p.waitFor();
              System.out.println("i is "+i);
              }catch(Exception e){System.out.println(e);}
    please mail me to [email protected]
    thanks in advance
    samba reddy
    india

    why use the Runtime? There are methods for this in the IO package ...

  • How To Copy/Access Files From Finder To iCloud?

    Is there a way I can quickly copy files from my Finder window directly into iCloud without having to drag and drop into the web browser window? I like to use my apps in full screen as much as possible and unless I've missed a shortcut of sorts, I have to go through the process of exiting full screen for the purpose of having to drag and drop the files?
    I tried Command-C to copy and then paste but that didn't work.  My preference would be to have full access to my iCloud files through the finder window.  Did I miss a setting in Finder Preferences?
    Thanks

    This is the closest I've come but it doesn't allow you to copy files to the folder in the sidebar:
    http://hints.macworld.com/article.php?story=20120814000425637

  • How to copy the file from firebird database to SQL server

    Hi all,
    I have a file in Fire bird Database (30 GB with .ydb extension).  which needs to be restored to SQL Server. I Have created a linked server and done it but it is taking very long time to update the
    records. Can any one please suggest if u have any alternate method to do this.
    Thanks in Advance
    Regards,
    Balaji Prasad B
    Balaji - BI Developer

    Can you try doing it in two steps?
    1. Downloading file to a shared folder path
    2. Uploading file from path to SQLServer using bulk options like OPENROWSET...BULK
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My Wiki User Page
    My MSDN Page
    My Personal Blog
    My Facebook Page

Maybe you are looking for