How to Count the Materials used in the Service Orders

Hi Experts,
I have created a replacement variable to get the count of the materials in the report.
Here I have some service orders where material is not consumed. It is called no part call.
When I run the report. It give count for all the materials and aswell as the field where we have "not assigned" (no part/no material).
I want only the count for Material not for "not assigned".
Can any expert help me achieve this please.
Thanks

Brilliant,
Full Points assigned
Thanks

Similar Messages

IMP: How to delete the service order

Hey Experts,
Can you tell me how to delete the service order which was created in IW31..? or we have any Functions Module to delete the service order?
and one more question is I have more than 100 service order in the table ,but it will display only 50 order when i execute this Functions Module BAPI_ALM_ORDERHEAD_GET_LIST
can you tell me how to solve this problem...?
Thanking you in advance,
Regards
J Sarathi

This is what the BAPI_ALM_ORDERHEAD_GET_LIST documentation says
"You can use this method to determine a list of orders according to a list of selection criteria. The number of hits that are produced for the person calling up the list, can be specifically reduced; without further parameter transfers, the first 50 hits are displayed. A complete list of the hits is stored internally. If you call up the selection again within a Logical Unit of Work (LUW) without changing the selection parameters, but with other refurbishment parameters, then you receive further partial quantities of the selection result, as specified by you."
and for deletion
check whether you can set any deletion status through the fm BAPI_ALM_ORDER_MAINTAIN
Also check the business objects BUS2007, BUS2088

How to find the Service order and its status..

Hello,
How see the status of the service order...
i have to search for all the service orders where all of them completed once....
which tables, fields are useful.
Please help to solve this issue.
thanks for yoru cooperation

Hello Gun,
How to see the status desciption for example
I1005
I1004
I1002...etc
waht I1005 means. I have to display status of each service order in the list , here i can not display I1005 is the status, instad i have to diplay I1005's desciption.

How to create the service order using CRMXIF_ORDER_SAVE

Hi Friends,
I want to create service order using thsis function module
CRMXIF_ORDER_SAVE and quantity also in this service order transaction.
Any body please explain the above question

Hi Friends,
I want to create service order using thsis function module
CRMXIF_ORDER_SAVE and quantity also in this service order transaction.
Any body please explain the above question

How to update the service order status at meter level

Hi
I need to fetch one open service order and update the retrieved open service order status at meter level.
I am trying to do it through BAPI_ALM_ORDER_MAITAIN but i am not able to do it.
Please let me know the process how to update.
Thanks & Regards
Pallavi

Hi,
Check if this code works ...
REPORT zbapi .
DATA t_meth TYPE TABLE OF bapi_alm_order_method.
**Internal table for Operation (BAPI)
DATA t_oper TYPE TABLE OF bapi_alm_order_operation.
DATA t_comp TYPE TABLE OF bapi_alm_order_component.
**Internal Table for Opertaions UP (BAPI)
DATA t_comp_up TYPE TABLE OF bapi_alm_order_component_up.
**Internal table for BAPI Return code
DATA t_ret TYPE TABLE OF bapiret2.
***WORK AREA DECLARATIONS
**Work Area for Hedaer
DATA:wa_header TYPE caufvdb,
wa_meth TYPE bapi_alm_order_method,
wa_op TYPE afvgb,
wa_comp TYPE resbb,
wa_comp1 TYPE bapi_alm_order_component,
wa_comp_up TYPE bapi_alm_order_component_up,
wa_oper TYPE bapi_alm_order_operation.
PARAMETERS:TEST.
****Fill Method Internal table
CLEAR wa_meth.
wa_meth-method = 'SAVE'.
APPEND wa_meth TO t_meth.
wa_meth-refnumber = sy-tabix.
wa_meth-objecttype = 'COMPONENT'.
wa_meth-method = 'CHANGE'.
wa_meth-objectkey(12) = '000004000104'.
wa_meth-objectkey+12(4) = '0010'.
wa_meth-objectkey+16(4) = '0010'.
APPEND wa_meth TO t_meth.
**Component Internal table
wa_comp1-reserv_no = '0000001072'.
wa_comp1-res_item = '0001'.
wa_comp1-activity = '0010'.
wa_comp1-item_number = '0010'.
wa_comp1-special_stock = 'B'.
wa_comp1-requirement_quantity = '15'.
wa_comp1-stge_loc = '0001'.
wa_comp1-backflush = 'X'.
APPEND wa_comp1 TO t_comp.
**Component Update Internal table
wa_comp_up-special_stock = 'X'.
wa_comp_up-backflush = 'X'.
wa_comp_up-requirement_quantity = 'X'.
wa_comp_up-stge_loc = 'X'.
APPEND wa_comp_up TO t_comp_up.
**Call Bapi
BREAK-POINT.
CALL FUNCTION 'BAPI_ALM_ORDER_MAINTAIN'
TABLES
it_methods = t_meth
it_component = t_comp
it_component_up = t_comp_up
return = t_ret.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'. <--- Hope u r using this too
regards,
Naveen
Edited by: Naveen Deva on Apr 16, 2009 9:12 AM

How to count the number of rows in a resultser object?

hi there
how to count the number of rows in a resultser object which may contains millions of rows? besides using a while loop? thanks

You don't, you execute a query whose result is the record count of those records that match the search and then you execute the actual query to create your record set. Typically you do
select count(id) from YourTable where [filter]
from the resulting ResultSet do
int res.getInt(1);
which gives you the count and then
select id from YourTable where [filter]
to produce the actual result set.
in the second query the id part can be substituted with the actual fields you want.

How to count the no of digits entered in the NumericField & print the same

Hi!
How to count the no of digits entered in the Numberic Field and print the content of Numberic Field.
Thanks.

Hi Venkat,
To check the number of digits, just convert it to a string and use the length() method. to get the number of characters. However, I am not getting your second point of printing the number?
Kindly explain in detail.
Regards,
Poojith MV

How to count the number of lines dynamically,

In the below code am trying to read the lines which are selected using a check box, also am categorizing the contents depending on the follow up material.
after displaying one category contents am displaying a line
which also counts to a line in the internal table.
My question is how to count the number of lines(ULINE) displayed dynamically.
FORM GET_LINES .
DATA: LV_LINES TYPE I,
        LV_TIMES TYPE I,
        LV_TABIX TYPE SY-TABIX.
DESCRIBE TABLE IT_REC LINES LV_LINES.
DO LV_LINES TIMES.
    LV_TIMES = SY-INDEX .
    READ LINE LV_TIMES FIELD VALUE IT_REC-CHECK INTO GV_CHECK.
    IF SY-SUBRC EQ 0 AND GV_CHECK IS NOT INITIAL.
      LV_TABIX = LV_TIMES.
      READ TABLE IT_REC INDEX LV_TABIX INTO GWA_UPDATE.
      IF SY-SUBRC EQ 0.
        APPEND GWA_UPDATE TO GT_UPDATE.
      ENDIF.
    ENDIF.
ENDDO.
ENDFORM.                    " GET_LINES

In the below code am trying to read the lines which are selected using a check box, also am categorizing the contents depending on the follow up material.
after displaying one category contents am displaying a line
which also counts to a line in the internal table.
My question is how to count the number of lines(ULINE) displayed dynamically.
FORM GET_LINES .
DATA: LV_LINES TYPE I,
        LV_TIMES TYPE I,
        LV_TABIX TYPE SY-TABIX.
DESCRIBE TABLE IT_REC LINES LV_LINES.
DO LV_LINES TIMES.
    LV_TIMES = SY-INDEX .
    READ LINE LV_TIMES FIELD VALUE IT_REC-CHECK INTO GV_CHECK.
    IF SY-SUBRC EQ 0 AND GV_CHECK IS NOT INITIAL.
      LV_TABIX = LV_TIMES.
      READ TABLE IT_REC INDEX LV_TABIX INTO GWA_UPDATE.
      IF SY-SUBRC EQ 0.
        APPEND GWA_UPDATE TO GT_UPDATE.
      ENDIF.
    ENDIF.
ENDDO.
ENDFORM.                    " GET_LINES
The display function is:
FORM DISPLAY_DATA .
ULINE.
WRITE : /1 SY-VLINE, 'check',
            10 SY-VLINE, 'Plant',
           20 SY-VLINE, 'Material number',
           50 SY-VLINE, 'Follow up material',
           70 SY-VLINE, 'Safety stock',
          100 SY-VLINE, 'Partc'.
ULINE.
LOOP AT IT_MARC.
    MOVE: IT_MARC-WERKS TO IT_REC-WERKS,
          IT_MARC-MATNR TO IT_REC-MATNR,
          IT_MARC-NFMAT TO IT_REC-NFMAT,
          IT_MARC-EISBE TO IT_REC-EISBE,
          IT_MARC-PARTC TO IT_REC-PARTC .
    APPEND IT_REC.
    CLEAR IT_MARC.
ENDLOOP.
DATA: GV_TABIX TYPE SY-TABIX.
LOOP AT IT_REC.
    GV_TABIX = SY-TABIX.
    READ TABLE GT_TOTAL WITH KEY WERKS = IT_REC-WERKS
                                 NFMAT = IT_REC-NFMAT.
    IF SY-SUBRC EQ 0.
      IT_REC-PARTC = GT_TOTAL-PARTC.
      MODIFY IT_REC INDEX GV_TABIX TRANSPORTING PARTC.
    ENDIF.
ENDLOOP.
LOOP AT IT_REC.
    WRITE : /1 SY-VLINE, IT_REC-CHECK AS CHECKBOX,
            10 SY-VLINE, IT_REC-WERKS,
            20 SY-VLINE, IT_REC-MATNR,
            50 SY-VLINE, IT_REC-NFMAT,
            70 SY-VLINE, IT_REC-EISBE,
           100 SY-VLINE, IT_REC-PARTC.
    AT END OF NFMAT.
      ULINE.
    ENDAT.
ENDLOOP.
ULINE.
ENDFORM.                    " DISPLAY_DATA
Solved

How to count the number of text boxes that are data entered

How to count the number of text boxes that are data entered in visual basic form.

Here is an Iterator that expands on my previous response:
''' <summary>
''' Iterator for form controls
''' </summary>
''' <param name="onlyControlsOfType">specify type if a certain type of controls needed</param>
''' <param name="onlyTopLevel">if true don't search containers within the form</param>
''' <returns></returns>
''' <remarks></remarks>
Private Iterator Function AllControls(Optional onlyControlsOfType As Type = Nothing, _
Optional onlyTopLevel As Boolean = False) As IEnumerable(Of Control)
Dim ctrl As Control = Me.GetNextControl(Me, True)
Do Until ctrl Is Nothing
If onlyControlsOfType Is Nothing OrElse ctrl.GetType = onlyControlsOfType Then
If TypeOf ctrl.Parent Is Form OrElse Not onlyTopLevel Then
Yield ctrl
End If
End If
ctrl = Me.GetNextControl(ctrl, True)
Loop
End Function
Some sample uses:
For Each
For Each c As Control In AllControls()
Debug.WriteLine(c.Name)
Next
List of all controls, including controls in containers i.e. Groupbox
Dim l As List(Of Control) = AllControls().ToList
List of all Textbox controls, including Textboxes in containers i.e. Groupbox
l = AllControls(GetType(TextBox)).ToList
List of all Textbox controls, don't include Textboxes in containers i.e. Groupbox
l = AllControls(GetType(TextBox), True).ToList
'Those who use Application.DoEvents() have no idea what it does and those who know what it does never use it.' JohnWein
Multics
My Serial Port Answer

How to count the no of record in grid.

Hi Experts,
I have one database block & this is bolck has contain 4 non database item is there. In database block has contain the id and description is non database block item. While i m querying the data description is shown depends up on ID. It is in grid. How to count the no of record in grid. My code is
LV_CUR_ITM :=:SYSTEM.CURSOR_RECORD;
FOR I IN 1.. LV_CUR_ITM LOOP
LAST_RECORD;
SELECT NSN_NO INTO :ORD_DIS_NSN_ITEM_DET.NSN_NO
FROM NSN_MST WHERE NSN_ID= :ORD_DIS_NSN_ITEM_DET.NSN_ID;
SELECT FOB_PRICE INTO :ORD_DIS_NSN_ITEM_DET.FOB_PRICE
FROM PRODUCT_SUPPLIER WHERE PRD_ID_NUMBER= :ORD_DIS_NSN_ITEM_DET.PRD_ID_NUMBER
AND BAS_ORG_ID_NUMBER=:ORD_DIS_NSN_ITEM_DET.ORG_ID_NUMBER;
SELECT DESCRIPTION INTO :ORD_DIS_NSN_ITEM_DET.PRD_DESC
FROM PRODUCT WHERE ID_NUMBER= :ORD_DIS_NSN_ITEM_DET.PRD_ID_NUMBER;
SELECT FULL_NAME INTO :ORD_DIS_NSN_ITEM_DET.SUPP_NAME
FROM ORGANISATION WHERE ID_NUMBER=:ORD_DIS_NSN_ITEM_DET.ORG_ID_NUMBER;
NEXT_record;
END LOOP;
Thx in advance.

Hai,
Add a Non database item to that block, and set the Calculation Mode as Summary, and Summary Function to Count.
Then u will get the total no of records from this text. ( You can hide this, so that the use won't see it. )
OR
go to the Last Record, then
LV_CUR_ITM :=:SYSTEM.CURSOR_RECORD; This will also work.
Regards,
Manu.
If this answer is helpful or correct, please mark it. Thanks.

How to create the sales order using BAPI's ....?

Hi Guru's,
could you please provide how to create the sales order using BAPI's .....i need step by step process and please provide the details from scratch....basically i don't have basic knowledge on this....please provide required inputs ....:)
thanks in advance
Srinivas......

Hi Guru's thanks for your inouts and your valuble time...
please find the program logic below...
*& Report ZAREPAS30
REPORT zarepas30.
DATA : gs_vbeln                   TYPE vbak-vbeln,
       gs_order_header_in         TYPE bapisdhd1,
       gs_order_header_inx        TYPE bapisdhd1x,
       gt_order_items_in          TYPE STANDARD TABLE OF bapisditm,
       gwa_itab1                  TYPE bapisditm,
       gt_order_items_inx         TYPE STANDARD TABLE OF bapisditmx,
       gwa_itab2                  TYPE bapisditmx,
       gt_order_partners          TYPE STANDARD TABLE OF bapiparnr,
       gwa_itab3                  TYPE bapiparnr,
       gt_return                  TYPE STANDARD TABLE OF bapiret2,
       gwa_itab4                  TYPE bapiret2.
Sales document type
PARAMETERS: p_auart TYPE auart OBLIGATORY.
Sales organization
PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
Distribution channel
PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
Division.
PARAMETERS: p_spart TYPE spart OBLIGATORY.
Requested Delivery Date
PARAMETERS: p_edatu TYPE edatu OBLIGATORY.
Sold-to
PARAMETERS: p_sold TYPE kunnr OBLIGATORY.
Ship-to
PARAMETERS: p_ship TYPE kunnr OBLIGATORY.
Material
PARAMETERS: p_matnr TYPE matnr   OBLIGATORY.
Quantity.
PARAMETERS: p_menge TYPE kwmeng OBLIGATORY.
Plant
PARAMETERS: p_plant TYPE werks_d OBLIGATORY.
Start-of-selection.
START-OF-SELECTION.
Header data
Sales document type
gs_order_header_in-doc_type = p_auart.
gs_order_header_inx-doc_type = 'X'.
Sales organization
gs_order_header_in-sales_org = p_vkorg.
gs_order_header_inx-sales_org = 'X'.
Distribution channel
gs_order_header_in-distr_chan = p_vtweg.
gs_order_header_inx-distr_chan = 'X'.
Division
gs_order_header_in-division = p_spart.
gs_order_header_inx-division = 'X'.
Reguested Delivery Date
gs_order_header_in-req_date_h = p_edatu.
gs_order_header_inx-req_date_h = 'X'.
gs_order_header_inx-updateflag = 'I'.
Partner data
Sold to
gwa_itab3-partn_role = 'AG'.
gwa_itab3-partn_numb = p_sold.
APPEND gwa_itab3 TO gt_order_partners .
ship to
gwa_itab3-partn_role = 'WE'.
gwa_itab3-partn_numb = p_ship.
APPEND gwa_itab3 TO gt_order_partners .
ITEM DATA
gwa_itab2-updateflag = 'I'.
Line item number.
gwa_itab1-itm_number = '000010'.
gwa_itab2-itm_number = 'X'.
Material
gwa_itab1-material = p_matnr.
gwa_itab2-material = 'X'.
Plant
gwa_itab1-plant    = p_plant.
gwa_itab2-plant   = 'X'.
Quantity
gwa_itab1-target_qty = p_menge.
gwa_itab2-target_qty = 'X'.
APPEND gwa_itab1 TO gt_order_items_in.
APPEND gwa_itab2 TO gt_order_items_inx.
Line item number.
gwa_itab1-itm_number = '000020'.
gwa_itab2-itm_number = 'X'.
Material
gwa_itab1-material = p_matnr.
gwa_itab2-material = 'X'.
Plant
gwa_itab1-plant    = p_plant.
gwa_itab2-plant   = 'X'.
Quantity
gwa_itab1-target_qty = p_menge.
gwa_itab2-target_qty = 'X'.
APPEND gwa_itab1 TO gt_order_items_in.
APPEND gwa_itab2 TO gt_order_items_inx.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
    order_header_in               = gs_order_header_in
    ORDER_HEADER_INX              = gs_order_header_inx
IMPORTING
    SALESDOCUMENT                 = gs_vbeln
tables
    RETURN                        = gt_return
    ORDER_ITEMS_IN                = gt_order_items_in
    ORDER_ITEMS_INX               = gt_order_items_inx
    order_partners                = gt_order_partners.
Check the return table.
LOOP AT gt_return into gwa_itab4 WHERE type = 'E' OR type = 'A'.
    EXIT.
ENDLOOP.
IF sy-subrc = 0.
    WRITE: / 'Error occured while creating sales order '.
ELSE.
Commit the work.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    WRITE: / 'Document ', gs_vbeln, ' created'.
ENDIF.

How to count the number of wins?

I have a tic tac toe simulator that simulates a game of tic tac toe (obviously). I press the 'play' button, and 1 random X and O is placed in 9 of the labels. Then the application says if X or O wins, or if the game was a tie/no winner. So,
what I want to do is when I click the 'exit' button, I want a message box telling the user how many times X won, O won, and how many ties there were. I am not too sure how to count the number of wins.
-Thanks

Thanks for the reply. I could be wrong, but I do not think that is exactly what I am looking for. Here is the code that I have that determines the winner:
switch (checkWinner())
case 'T':
winnerLabel.Text = "It was a tie!";
break;
case 'O':
winnerLabel.Text = "O Wins!";
break;
case 'X':
winnerLabel.Text = "X Wins!";
break;
private char checkWinner()
char WinnerChar = ' ';
int winning_line = 0;
if (GameBoardCellChar[0].Equals(GameBoardCellChar[1]) && GameBoardCellChar[0].Equals(GameBoardCellChar[2]))
WinnerChar = GameBoardCellChar[0];
winning_line++;
if (GameBoardCellChar[3].Equals(GameBoardCellChar[4]) && GameBoardCellChar[3].Equals(GameBoardCellChar[5]))
WinnerChar = GameBoardCellChar[3];
winning_line++;
if (GameBoardCellChar[6].Equals(GameBoardCellChar[7]) && GameBoardCellChar[6].Equals(GameBoardCellChar[8]))
WinnerChar = GameBoardCellChar[6];
winning_line++;
if (GameBoardCellChar[0].Equals(GameBoardCellChar[3]) && GameBoardCellChar[0].Equals(GameBoardCellChar[6]))
WinnerChar = GameBoardCellChar[0];
winning_line++;
if (GameBoardCellChar[1].Equals(GameBoardCellChar[4]) && GameBoardCellChar[1].Equals(GameBoardCellChar[7]))
WinnerChar = GameBoardCellChar[1];
winning_line++;
if (GameBoardCellChar[2].Equals(GameBoardCellChar[5]) && GameBoardCellChar[2].Equals(GameBoardCellChar[8]))
WinnerChar = GameBoardCellChar[2];
winning_line++;
if (GameBoardCellChar[0].Equals(GameBoardCellChar[4]) && GameBoardCellChar[0].Equals(GameBoardCellChar[8]))
WinnerChar = GameBoardCellChar[0];
winning_line++;
if (GameBoardCellChar[2].Equals(GameBoardCellChar[4]) && GameBoardCellChar[2].Equals(GameBoardCellChar[6]))
WinnerChar = GameBoardCellChar[2];
winning_line++;
if (winning_line == 0 || winning_line > 1)
WinnerChar = 'T';
return WinnerChar;
Do I have to include something extra in here to get the count or no?
The code I posted is the coding in my play button.

How to count the number of AAA clients

Hi,
As we know, ACS5.2 is required with a base license-- supporting 500 network devices.
Sometimes there are lots of AAA clients or network devices that are authenticating simultanious. So my question is, how to count the network devices allowed to auth on ACS5.2? Does that only include network devices, or including both any network devices or AAA clients?
Rgds,
Laowu5017

Hi,
ACS 5.x counts the number of AAA clients that are configured on the ACS.
Please note that AAA clients and networks devices is the same and they comply switches, routers, WLCs, or whatever other device configured under
Network Resources >
... >
Network Devices and AAA Clients
AAA Clients are NOT the AAA suplicants.
The end user clients PCs are the AAA suplicants, and for this there is no limit number.
HTH,
Tiago
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

How to count the number or rows in file

Hi Experts,
I am file as source and Oracle as target. My file containing the some data which is going to load to the target.
My requirement is that I want to count the number of rows which my file contains. Please help me how to count the total number of rows in file.
Thx,
Sahadeva.

Hi,
You won't give a name DEST_USER_NAME:ODI will get these information.
it is important Command on source and Command on Source side .
-Pls write jython code on Command on Source side
-And Command On Target side Choose technology as Oracle and set logical schema to HR_logical
Sorry my mistake.İt is related jython syntax.Here is code:
import java.lang as lang
import java.sql as sql
import java.lang.String
import os
lang.Class.forName("<%=snpRef.getInfo("DEST_JAVA_DRIVER")%>")
cons=sql.DriverManager.getConnection("<%=snpRef.getInfo("DEST_JAVA_URL")%>", "<%=snpRef.getInfo("DEST_USER_NAME")%>", "<%=snpRef.getInfo("DEST_PASS")%>")
dblinks= cons.createStatement()
file1=open('EMP.txt','r')
count=0
line=file1.readline()
while line !='':
count+=1
line=file1.readline()
file1.close()
sqlQuery = "insert into HR.ETL_FILE_LOG (FILE_COUNT) values (count)"
rqQuery= dblinks.execute(sqlDBLink)
cons.close()
Regards

How to get the Purchase order Qty in the object dependency

Hi,
We are using variant pricing in the purchase order. I have condition type say u201CZVBPu201D for Pallet cost. I defined Pallet cost as 5 USD per each (pallet). I have to calculate Number of pallets = Purchase order Qty/ 5. The number of pallets should be rounded to nearest integer.
My question is how to get the Purchase order Qty in the object dependency?
Is there any reference table and field can be used to get Purchase order Qty just like we use MMCOM-VKOND for variant pricing.
Appreciate your help
Thanks,
Srini

Hi,
1. I do not have system now so I can not conclusively tell about table field .
2. Since I did it long back so I also do not exactly remember it, there are more than one place where PO qty appears for example Item overview and Item details - one of the PO qty when used in the characteristic do pull the PO qty which can be used for variant pricing (so request to please update the forum with the correct table and field once you find it - in the meantime if I get opportunity to get to system I will also try and find out ).

How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?

Dear SharePoint Developers,
Please help.
I need to know How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?
I think this is a "sealed column", whatever that is, which is shown in SPD 2013 as a column of content type "document, folder, MyCustomContentType".
I know when I set the column order in my custom Content Type settings page, it is correct.
But, when I load the NewDocSet.aspx page, the column order that I set in the settings page is NOT used for this "sealed column" which is bad.
Can you help?
Please advise.
Thanks.
Mark Kamoski
-- Mark Kamoski

Hi,
According to your post, my understanding is that you want to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx.
Per my knowledge, if you have Content Type management enabled for the list or library (if you see a list of content type with the option to add more), the display order of columns is set for each content type.
Drill down into one of them and you'll see the option under the list of columns for that content type.
To apply the column order in the NewDocSet.aspx page, you need to:
Select Site Settings, under Site Collection Administration, click Content type publishing. In the Refresh All Published
Content Types section, choose Refresh all published content types on next
update.
Run two timer jobs(Content Type Hub, Content Type Subscriber) in central admin(Central Administration--> Monitoring--> Review timer jobs).
More information:
http://sharepoint.stackexchange.com/questions/95028/content-types-not-refreshing-on-sp-online
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to Count the Materials used in the Service Orders

Similar Messages

Maybe you are looking for