How to create a function to finish the step add and decrease
Hi,sirs,
Can you give a simple example that uses a function to finish the step add and decrease? In fact, I am doing the following job:
I hope to use "while" frame to implement "step add":
when the "i" in the "while" frame increases, a value should be increased accordingly and then be output. However, after the value reached a Max value, it should be decreased while the "i" continues increasing.
Can you give me a simple program for that? I am using Labview 6.0.
Thanks a lot.
Here's a slightly different version. In this one, you can specify the minimum and maximum count values, the starting count, start count direction, and even have different values for incrementing and decrementing. There is also a Pause and a reset control.
It reverses count direction when either the min or max count is reached.
It's saved in LabVIEW 6.0.2. This one is designed to be used as subVI.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.
Attachments:
Up-Down_Counter_(DBL).vi 61 KB
Similar Messages
-
How to create a function to get the 16th of the current month and the 15th of the next month
I need to create a function to get the 16th of the current month and 15th of the next month to use it in the fast formula to calculate the sick leave.
Example:
If an employee takes a sick leave from 16 feb 2015 to 17 feb 2015 , I want it to affect march's payroll not February.
Please help and thanks in advance.Below statement gives you the result. Use the concept and write your PL/SQL function.
select TO_DATE('16-'||TO_CHAR(SYSDATE, 'MON-RRRR')), TO_DATE('15-'||TO_CHAR(add_months(SYSDATE, 1), 'MON-RRRR')) from dual;
Or you can use same construct directly in the fast formula by changing syntax accordingly.
Regards,
Peddi. -
HOw to create a text file in the given path and delete it after the use?
Hi all,
I am trying to create a text file at the given path and delete the created file after the use.
I am using following code.:
import java.io.*;
// write binary data as characters
public class RanIO {
public static void main(String f[])
// First illustrate append
String lineSep = "\n";
try {
File temp= new File("C:/Ash","cute.txt");
boolean ch=temp.createNewFile();
if(ch)
System.out.println("file created");
else
System.out.println("file Not created");
//writing to file
/* PrintWriter p = new PrintWriter(new BufferedWriter(new FileWriter("cute.txt",true)));
p.print("Emp NO");
p.close();*/
// Open fileWriter in append mode
FileWriter fos = new FileWriter(temp, true);
BufferedWriter bw = new BufferedWriter(fos);
PrintWriter pw = new PrintWriter(fos);
double d=550;
// lineSep = System.getProperty("line.separator");
pw.print("Hello");
//pw.print( lineSep );
pw.print( d );
pw.close();
boolean det=temp.delete();
if(det)
System.out.println("File deleted");
else
System.out.println("File not deleted");
} catch (IOException ioe)
System.out.println( "Append IO error:" + ioe );
My problem:
1)
I am not able to write to the file. I want to know, where i am going wrong.
It is giving error message like
"Canot resolve Symbol: temp,"
But, FileWriter Constructor should accept a File type parameter.
here temp is a file parameter.
If i am not using file=new file();
i can't delete the file after the use. i.e if i use
PrintWriter p = new PrintWriter(new BufferedWriter(new FileWriter("cute.txt",true)));
how can i delete cute.txt after the use?
2)
I am not able to write to the text file. file is created but, a blank file.
"Hello" is not written into the text file.
can anyone help me in this regard
Thanks in advance
AshviniThank you Ram,
But, i want to create a text file in Append mode.
for that i used
FileWriter fos = new FileWriter(temp,true); But, it is not accepting FileWriter constructor in
this format. if i use
FileWriter fos = new
FileWriter("c:/ash/cute.txt",true); it works fine. !!!!!Here's the javadoc
public FileWriter(File file,
boolean append)
throws IOExceptionConstructs a FileWriter object given a File object. If the second argument is true, then bytes will be written to the end of the file rather than the beginning.
Parameters:
file - a File object to write to
append - if true, then bytes will be written to the end of the file rather than the beginning
Throws:
IOException - if the file exists but is a directory rather than a regular file, does not exist but cannot be created, or cannot be opened for any other reason
Since:
1.4
Are you using jdk.13 or lower ?
>
ONe more doubt, Does flush method deletes a file?
if not, then i need to use
File temp=new File("c:/ash/cute.txt");
FileWriter fos = new FileWriter(temp,true); //which
is again a problem
if(temp.delete())
out.println("File is deleted");
}I don't know whether i am taking it wrong ! or
anything wrong with my coding ! but, after creating
and writing data into a text file. I must delete it
as it contains confidential informations.
Regards,
Thanks.'flush' writes to a file immediately. Else you should explicitly call 'flush' to write contents from buffer to underlying source.
javadoc again
PrintWriter
public PrintWriter(Writer out,
boolean autoFlush)Create a new PrintWriter.
Parameters:
out - A character-output stream
autoFlush - A boolean; if true, the println, printf, or format methods will flush the output buffer
cheers,
ram.
Question; What do you gain by opening a file, writing to it and deleting it in the same program ? -
How to create menu function for link to open file
Hi,
I need help how to create menu function for link to access file and allow user to save the file when click on it.
The file will keep inside server.
Thank you.
Regards,
WilsonI need help how to create menu function for link to access file and allow user to save the file when click on it.
The file will keep inside server.AFAIK, you have to write a custom code to achieve this and Oracle does not provide this functionality.
If you want to store the file as an attachment, please see (How to Store Image/PDF Attachments on the File System in 11i and R12 (like Attachment File Directory) [ID 294525.1]).
Thanks,
Hussein -
Can any body tell me how to create a layout variant in the selection
hi friends i would like to know how to create a layout variant in the selection screen and how to select the variant to display the ouptut using the layout using disvariant.please if possible give me example. thanks in advance.
hi,
I shall give you the code. It will definitely work.
<u><b>Declerations you need to make</b></u>
data: WK_VARIANT LIKE DISVARIANT,
WX_VARIANT LIKE DISVARIANT,
WK_REPID LIKE SY-REPID,
WK_VARIANT_SAVE(1) TYPE C,
WK_EXIT(1) TYPE C.
<b><u>Things you need to do in the initialization event:</u></b>
INITIALIZATION.
PERFORM F_INIT_VARIANT.
PERFORM F_VARIANT_DEFAULT USING PR_VARI.
*& Form f_init_variant
FORM F_INIT_VARIANT .
CLEAR WK_VARIANT.
WK_REPID = SY-REPID.
WK_VARIANT-REPORT = WK_REPID.
WK_VARIANT-USERNAME = SY-UNAME.
WK_VARIANT_SAVE = 'A'.
ENDFORM. " f_init_variant
*& Form f_variant_default
FORM F_VARIANT_DEFAULT USING P_PR_VARI.
WX_VARIANT = WK_VARIANT.
IF NOT P_PR_VARI IS INITIAL.
WX_VARIANT-VARIANT = P_PR_VARI.
ENDIF.
CALL FUNCTION 'LVC_VARIANT_DEFAULT_GET'
EXPORTING
I_SAVE = WK_VARIANT_SAVE
CHANGING
CS_VARIANT = WX_VARIANT
EXCEPTIONS
WRONG_INPUT = 1
NOT_FOUND = 2
PROGRAM_ERROR = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CASE SY-SUBRC.
WHEN 0.
P_PR_VARI = WX_VARIANT-VARIANT.
WHEN 2.
CLEAR P_PR_VARI.
ENDCASE.
ENDFORM. " f_variant_default
<b><u> After this Things you need to do in the At selection screen event:</u></b>
AT SELECTION-SCREEN ON VALUE-REQUEST FOR PR_VARI.
PERFORM F_VARIANT_F4 USING PR_VARI.
*& Form f_variant_f4
FORM F_VARIANT_F4 USING P_PR_VARI.
CALL FUNCTION 'LVC_VARIANT_F4'
EXPORTING
IS_VARIANT = WK_VARIANT
I_SAVE = WK_VARIANT_SAVE
IMPORTING
E_EXIT = WK_EXIT
ES_VARIANT = WX_VARIANT
EXCEPTIONS
NOT_FOUND = 1
PROGRAM_ERROR = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF WK_EXIT IS INITIAL.
WK_VARIANT-VARIANT = WX_VARIANT-VARIANT.
P_PR_VARI = WX_VARIANT-VARIANT.
ENDIF.
ENDFORM. " f_variant_f4
After this finally when you call the output using REUSE_ALV_GRID_DISPLAY YOU NEED TO mention this parameter in the function module
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
<i><u><b>IS_LAYOUT = WA_LAYOUT</b></u></i>
<i><u><b>I_SAVE = 'X'</b></u></i>
<u><i>I_DEFAULT = 'X'</i></u>
<u><b>IS_VARIANT = WK_VARIANT</b></u>
TABLES
T_OUTTAB = ITAB1
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
Once you do this,,, you can create a layout variant.
P.S. Mark all helpful answers for points.
JLN -
How to add a created Z function module to the existing list in WE21
Hi all,
There is some existing function modules ( like EDI_PATH_CREATE_CLIENT_DOCNUM ) in WE21 in the function module field.
here, i need to create one Z function module as per user requirement & want to add to that list. is it possible???
actually, i want the file name format is like
" Document Number_YYYYMMDDHHMMSS.xml ". but existing function modules are not giving this format.do anybody give any idea.
correct answers will be rewarded.
Thanks & RegardsHI Pabitra,
Yes, can always change the existing fm and add it with message type as follows pls note step 7 and step 8. (for inbound it is we42 and for outbound it is we41 )
Basic IDOCs have supplied by SAP with standard structure. (Segments). You can extend them with your own segments.
IDOCs does have unique number. They contain control, data, and status records.
Useful Transaction Codes:
WEDI : IDoc Menu
WE02 : IDoc List (can enter IDoc number to select on)
WE05 : IDoc List
WE19 : Transaction WE19 can be used to test the IDoc
WE30 : IDoc Type Development: Initial Screen
WE31: Development Segments: Initial Screen
WE60 : Documentation for IDoc Types. This allows you to view the IDoc you have created.
WE81 : Display View EDI: Logical Message Types: Overview
WE82: Display View Message Types and Assignment to IDoc Types: Overview
WE21 - Creation of POrt
WE20 - Partner Profile creation
SALE - ALE (Application Linking and Enabling) settings
For Outbound ALE Configurations: (Example)
IDoc definitions and necessary ALE configurations settings for the outbound .
Create Idoc segments Transaction WE31.
Create Idoc type Transaction WE30.
Create Message Type Transaction WE81.
Assign Message Type to Idoc type Transaction WE82.
Create a distribution Model - Transaction BD64
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
for creating a IDOC
see the below steps for outbound processing IDOCS..
2.1 Outbound Interface
PROCESS DIAGRAM
Outbound Interface
1. Analyse Hierarchy Levels
2. Create New segment
3. Create New IDoc Type
4. Create New Message Type
5. Link Message with IDoc Type
6. Create an entry in EDP13 via transactions WE20 and BD64
7. Populate the Custom IDoc via ABAP Program
7b Error Handling
7c. Send Status Email
8. Test the Population of the Custom IDoc
Step 1 Analyse Hierarchy Levels:
Analyse the data relationships being processed in the interface. Define the appropriate hierarchical Parent-to-Child relationships.
Navigate to transaction code WEDI
Transaction WEDI displays the IDOC main menu. This allows navigation around the various development and control areas to create a customised IDOC.
Step 2 Create a new segment:
via wedi : Development - IDOC Segments or Transaction code WE31.
Enter segment name and click on Create.
The? name of the segment type must start with Z1 , and have a maximum of eight characters.
Enter description and enter the relevant field names and data elements.
The segment should represent a structure in the program so for? each field in the segment a field name and a data element must be defined.
Save the segment and enter Person Responsible and Processing Person .
Go to Edit and Set Release.
Repeat this procedure for each new Segment in the IDOC.
Step 3 Create a new IDOC Type
via wedi Development - IDOC Types or Transaction WE30.
Enter segment name (starting with Z), click on Basic Type and then Create.
Create as new, enter Person Responsible and Processing Person and enter description.
On Create Basic Type screen decide where segments should be inserted and go to Edit/Create Segment.
Complete relevant fields in the Maintain Attributes screen:
From the relevant segments created in Step 2 enter the Segment type and if mandatory segment.
The Minimum and Maximum number of segments to be allowed in the sequence. (One minimum and one maximum if segment is mandatory).
The Parent Segment and Hierarchy Level will be automatically created depending on where in the IDOC tree you decided to create that particular segment.
Repeat this process for each segment needed in the IDOC type, deciding whether to add the next segments at the same level or as a Child.
When IDOC created return to initial screen. Go to Edit and Set Release.
Go to Transaction WE60 to view the IDoc Type you have created.
Step 4 Create new Message Type
via wedi Development - Message Types or Transaction WE81.
Display/Change and click on New Entries
Create a new Message Type and Save.
Step 5 Link Message Type to IDOC Type
via wedi Development - IDOC Type/Message or Transaction WE82.
Display/Change and then click on New Entries.
Enter Message Type, Basic Type (IDOC Type) and Release (46C) and Save.
Step 6 Create an entry in EDP13 via transactions WE20 and BD64.
The partner profile for the Idoc must be set up and generated in the transaction BD64 and transaction WE20.
WE20 Add Message Type to appropriate Partner Type, Enter Message Type, Receiver Port and Idoc Type and Save.
BD64 Create a Model View, Enter Sender and Receiver Ports, Attach Message Type. Go to Environment on Menu and click on Generate Partner Profiles and generate (not save) profile.
Step 7 Populate the custom IDOC via ABAP Program
See Test Program ZOUTBD_IDOC_TEMPLATE, Appendix IV.
Create an Internal Table for each segment type, this should be exactly the same structure as the segment type.
The control record is filled into a structure like EDIDC. The message type and the Idoc type for the Idoc must be populated into the eddic structure.
- PERFORM populate_Control_structure USING c_mestyp
c_SEGMENT_type1.
The data segments are filled into a structure like edidd-sdata; sdata and the segment name are populated into the edidd structure.
- PERFORM transfer_Parent_data_to_seg.
The standard SAP function module MASTER_IDOC_DISTRIBUTE is called to pass the populated IDOC to the ALE Layer.
- PERFORM master_idoc_distribute.
NOTE: This function module is only called for stand alone programs and Shared Master Data programs (SMD). It is not called when using extensions or output determination.
The ALE Layer handles the sending of the IDOC to the receiving system.
Error Handling (see Step 7b).
Commit work.
Project SpecificStep 7b Error Handling
Analyse which fields in the interface are mandatory for the receiving system and who needs to receive error notification.
Declare a structure of type MCMAILOBJ for sending instructions.
Enter values for the internal table based on structure MCMAILOBJ
For selection processes, on SY-SUBRC checks and where fields are mandatory for the receiving system; insert Function Module MC_SEND_MAIL.
Enter values in the following parameters: -
MS_MAIL_SENDMODE = B (Batch Mode)
MS_MAIL_TITLE = 'Mail Title'
MS_MAIL_DESCRIPTION = Error description (e.g. MATNR not given)
MS_MAIL_RECEIVER = Name of Receiver (To be determined)
MS_MAIL_EXPRESS = E (Express Delivery)
MS_MAIL_DLINAME = Leave Blank
MS_MAIL_LANGU = 'E' (Language)
MS_MAIL_FUNKOBJ_NAME = Leave Blank
TABLES
MS_MAIL_CONT = I_MCMAILOBJ
Note:
It has to be determined separately for each interface how these errors and mail notifications are to be grouped dependant upon the number of errors that are potentially likely. One possible approach is to send an email for each reason for rejection and include all the records that failed for that reason in the mail notification. Another possible approach is to send an email for every failure.
When error checking for mandatory fields it is common SAP practice to reject a record on its first failure (irrespective of subsequent errors in that record)
<b>Step 7
(Transaction WE57)
Assign the custom function module to the IDoc type and the message type.
Set function module to type F and direction 2 for inbound.
Step 8
(Transaction WE42)
Create a new process code and assign it to the function module. The process code determines how the incoming IDoc is to be processed in SAP.</b>
Step 9
(Transaction BD67)
Assign the function module to the process code created above. Got to New Entries and enter the process code and the function module name.
Step 10
(Transaction WE20 and Transaction BD64)
Create a partner profile for your message and ensure that in transaction WE20 the process code is the one that points to your function module. (See step 6 of creating Outbound Idocs).
Step 11
Ensure that error handling functionality is present.
If u still have doubt, i can send u the print screen doc - hope this helps u
<b>Reward pts if found usefull :)</b>
regards
Sathish -
How to create a temp table in the memory, not in disk?
in sql server, you can create a temp table in the memory instead of disk,
then you can do the insert, delete,update and select on it.
after finishing, just release it.
in Oracle,
I am wonderfing how to create a temp table in the memory, not in disk?
thanks,Thanks for rectifying me Howard.
I just read your full article on this too and its very well explained here:
http://www.dizwell.com/prod/node/357
Few lines from your article
It is true, of course, that since Version 8.0 Oracle has provided the ability to create a Keep Pool in the Buffer Cache, which certainly sounds like it can do the job... especially since that word 'keep' is used again. But a keep pool is merely a segregated part of the buffer cache, into which you direct blocks from particular tables (by creating them, or altering them, with the BUFFER POOL KEEP clause). So you can tuck the blocks from such tables out of the way, into their own part of the buffer cache... but that is not the same thing as guaranteeing they'll stay there. If you over-populate the Keep Pool, then its LRU mechanism will kick in and age its contents out just as efficiently as an unsegregated buffer cache would.
Functionally, therefore, there can be no guarantees. The best you can do is create a sufficiently large Keep Pool, and then choose the tables that will use it with care such that they don’t swamp themselves, and start causing each other to age out back to disk.
Thanks and Regards -
How to Create a Functiona Query
Dear all,
Could any body detail me how to create a functional query. Please give me step by step procedure to create a query.
I would appreciate if you can give me a material with screen shots. Your help will be highly appreciated.
Thank you
Raghu RamHi Raghu,
Go through this document it may help you,
SAP Query
Step 1: Create User Group SQ03
Follow the menu path SAP Menu > Tools > ABAP Workbench > Utilities > SAP Query > User Groups
a) In the User Group: Initial Screen -
Enter User Group Code (self named)
Click on Create
b) In the User Group (Code): Create or Change pop-up window -
Enter the User Group Description
Click on Save
c) In the Create Object Directory Entry pop-up window -
Ö Click on Local Object button
Ö The User Group Created is saved
Step 2: Create User Group SQ02
Follow the menu path SAP Menu > Tools > ABAP Workbench > Utilities > SAP Query > Infosets
a) In the Infoset: Initial screen -
Ö Enter Infoset Code (self named)
Ö Click on Create button
b) In the Infoset: Title & Database Screen -
Ö Enter Description of Infoset in the Name field
Ö In the Data Source selection: Select appropriate Data Source by clicking
the radio button
· Source the data can either be multiple tables OR single table. There are 4
options for the user to select from
Ö Click on Continue (Enter)
Ö Selected Table gets displayed in the Infoset : Initial Screen
c) In the Infoset: Initial Screen -
Ö Click on Insert Table button
d) In the Add Table Screen -
Ö Enter the Table Name that is to be inserted
Ö Click Continue (Enter)
e) In the Infoset: Initial Screen -
Ö Click on Back button
f) In the Field Group Defaults pop-up Screen -
Ö Select Appropriate Field Group Option by clicking on the radio button
· there are 3 options to select from. User can select Empty Field Group
option and then select the data fields in the steps explained further.
Alternatively, User can select an option which clubs all the data fields
From all the tables selected
Ö Click Continue (Enter)
g) In the Change Infoset Screen -
· the left side lists the Tables that the user has selected in step b, c & d
· In the right side, system creates field groups, one for each table listed in the
left part. Initially, the Field Groups are empty
Ö In the Left Side, Click on the arror next to the table name and expand and
display all the data fields in the table
Ö Select a Data Field from the expanded Table view, which is to be added to
the Field Group on the right.
Ö Select a Field Group on the right side, in which Data Field selected above
has to be added
Ö Right click on the Data Field selected and click on Add Field to Field Group
Ö The selected Data Field gets added to the selected Field Group, which is
indicated by an arrow next to the Field Group.
Ö Carry out the steps above to add the required Data Fields to the respective
Field Groups
Ö After transferring Data Fields to Field Groups click on Generate button
h) In the Create Object Directory Entry Screen -
Ö Click on Logical Object button to generate the infoset
i) In the Change Infoset Screen -
Ö Click on the Back button
j) User is taken back to the Infoset: Initial Screen which displays the
created Infoset record.
Step 3: Assigning User Group to Infoset SQ03
Follow the menu path SAP Menu > Tools > ABAP Workbench > Utilities > SAP Query > User Groups
a) In the User Groups: Initial screen -
Ö Enter the User Group for which Infoset is to be assigned
Ö Click on Assign Users & Infosets button
b) In the User Group: Assign Users Screen -
Ö Click on Assign Infosets button
c) In the next screen, select the Infoset, which needs to be attached to the
User Group selected
d) Click on the Back button
Step 4: Creating Query SQ00 & SQ01
Follow the menu path SAP Menu > Tools > ABAP Workbench > Utilities > SAP Query > Queries
a) In the Query from User Group: Initial Screen -
Ö Click on Other User Groups button
Ö In the pop-up screen, User Groups, select the User Group for which the
Query has to created. The pop-up screen closes.
Ö Enter the Query Code in the Query field
Ö Click on Create button
b) A pop-up screen Restrict Value Range shows the list of Infosets assigned to
the User Group
Ö Select the Infoset for which Query has to be created
c) In the new screen Create Query: Title, Format -
Ö Enter the Description of the Query in the Title field
Ö Click on the Next Screen button
d) In the Select Field Group screen
Ö Select the Field Groups from which Data Fields have to be selected for the
Output
Ö Click on the Next Screen button
e) In the Select Field screen -
Ö Select the Data Fields, which should appear in the output
Ö Click on the Next Screen button
f) In the Screen Selection -
Ö Select the Data Fields for the selection criteria
Ö Enter the sequence in which the selected fields would appear in the input
screen of the query.
Ö Define if the selection criteria should be Single Value or Multiple Value Range
by clicking in the appropriate check boxes
Ö Click on the Basic List button
g) In the screen Query Layout Design -
Ö Select the Output Fields from the Data Fields section by clicking the
appropriate check box
Ö Change the sequence of Data Field columns if required
Ö Click on the Test button to test the query created
h) On the Test Query screen click Continue
i) In the Query screen -
Ö Enter the selection criteria
Ö Click on Execute button
j) Save the Query created
Step 5: Running the Query SQ00
a) In the Query From User Group: Initial screen
b) Click on Other User Groups button to select the User Group
c) In the pop-up screen User Groups select the User Group
d) System lists all the queries created for the User Group
e) Select the appropriate Query
f) Click on Execute button
g) User is taken to the Selection screen
h) Enter the selection criteria and click on Execute button
i) System runs the query and gives the output
Regards,
Murali. -
How to create some columns dynamically in the report designer depending upon the input selection
Post Author: ekta
CA Forum: Crystal Reports
how to create some columns dynamically in the report designer depending upon the input selection
how export this dynamic report in (pdf , xls,doc and rtf format)
report format is as below:
Element Codes
1
16
14
11
19
10
2
3
Employee nos.
Employee Name
Normal
RDO
WC
Breveavement
LWOP
Sick
Carers leave
AL
O/T 1.5
O/T 2.0
Total Hours
000004
PHAN , Hanh Huynh
68.40
7.60
76.00
000010
I , Jungue
68.40
7.60
2.00
5.00
76.00
000022
GARFINKEL , Hersch
66.30
7.60
2.10
76.00
In the above report first column and the last columns are fixed and the other columns are dynamic depending upon the input selection:
if input selection is Normal and RDO then only 2 columns w'd be created and the other 2 fixed columns.
Can anybody help me how do I design such report....
ThanksHi Developer life,
According to your description that you want to dynamically increase and decrease the numbers of the columns in the table, right?
As Jason A Long mentioned that we can use the matrix to do this and put the year field in the column group, amount fields(Numric values) in the details, add an filter to filter the data base on this column group, but if
the data in the DB not suitable to add to the matrix directly, you can use the unpivot function to turn the column name of year to a single row and then you can add it in the column group.
If there are too many columns in the column group, it will fit the page size automatically and display the extra columns in the next page.
Similar threads with details steps for your reference:
https://social.technet.microsoft.com/Forums/en-US/339965a1-8cca-41d8-83ef-c2548050799a/ssrs-dataset-column-metadata-dynamic-update?forum=sqlreportings
If your still have any problem, please try to provide us more details information, such as the data structure in the DB and the table structure you are currently designing.
Any question, please feel free to let me know.
Best Regards
Vicky Liu -
How to create a function with ref_cursor as parameter in OWB 10.1
Hi,
Can any one help me how to create a function with ref_cursor as parameter in OWB 10.1.?
Its urgent. Please help me.
Thanks,
SivHi David,
Thanks for your reply.
Before going for this function, I need to create a package in transformation node in owb module.
My package is as follows,
Create or replace package 123
type xxx is RECORD ( parameters);
type yyy is RECORD (parameters);
type aaa is table of yyy;
type bbb is REF CURSOR return xxx;
type ccc is record (parameters);
type ddd is ref cursor return eee;
END;
How can I create the above kind of package manually in OWB 10.1 (Should not to import the package)
Please help me its urgent.
Thanks,
Siv -
How to get the spool id or how to create a spool id for the report .
hi,
how to get the spool id or how to create a spool id for the report .
this spool id i have to use it in CONVERT_ABAPSPOOLJOB_2_PDF fm to get the pdf download file.
my requirement is to download a pdf file from the alv grid list.Hi Raghu,
Execute this program.
REPORT ZTEST_3318 .
tables: usr01.
perform send_report_to_spool.
*& Form send_report_to_spool
text
form send_report_to_spool.
data: loc_dest like pri_params-pdest,
wf_listname type char12,
wf_listtext like PRI_PARAMS-PRTXT,
wf_copies type i,
wf_days type i,
wf_PARAMS LIKE PRI_PARAMS, " achieving file PRI_PARAMS.
wf_valid type c.
clear : wf_listname , loc_dest , wf_listtext .
move: 'AP interface' to wf_listname .
move: 'AP interface' to wf_listtext .
select single spld into usr01-spld from usr01 where bname eq sy-uname .
if sy-subrc eq 0 .
move: usr01-spld to loc_dest .
endif .
call function 'GET_PRINT_PARAMETERS'
EXPORTING
destination = loc_dest
copies = 1
list_name = wf_listname
list_text = wf_listtext
immediately = ' '
release = ' '
new_list_id = 'X'
expiration = 1
line_size = 200
line_count = 65
layout = 'X_65_200'
sap_cover_page = 'X'
receiver = 'SAP*'
department = ''
no_dialog = 'X'
IMPORTING
out_parameters = wf_params
valid = wf_valid.
if wf_valid <> space.
new-page print on parameters wf_params no dialog.
perform write_summary .
new-page print off.
endif .
endform. "send_report_to_spool
*& Form write_summary
text
--> p1 text
<-- p2 text
FORM write_summary .
data: begin of itab occurs 0,
matnr type matnr,
end of itab.
select matnr
from mara
into table itab
up to 10 rows.
loop at itab.
write: / itab-matnr.
endloop.
ENDFORM. " write_summary
This will create spool in SP01.What data you want to put in Spool write it in form write_summary.I have done coding for testing purpose
After that use that spool for your purpose.
If Useful award point -
How to create user function in Data Functions in Query Designer?
Could someone tell me how to create user function in Data Functions in Query Designer?
I mean function like "NDIV0" in Data Functions.
SAP BW 3.x.
Query Designer (SAP BW 3.x)Hi check the following URL, it gives how to add in Formulas in formula Builder, not in DataFunctions.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f095592f-42f7-2a10-6ab1-c836a559b48f
Thanks
Reddy -
How to create search function (af:query) using method in java
hi All..:)
i got problem with search custom (af:query), how to create search function/ af:query using method in java class?
anyone help me....
thx
agungdmtHi,
download the ADF Faces component demo sources from here: http://www.oracle.com/technetwork/testcontent/adf-faces-rc-demo-083799.html It also has an example for creating a custom af:query model
Frank -
How to create a function group (step by step)?
I would like to know how to create a function group, step by step.
step 1 do....
step 2 do ...also,
Go to SE80 for creating a function group.
Also have a look at below link.
http://help.sap.com/saphelp_nw04/helpdata/en/d1/801ef5454211d189710000e8322d00/frameset.htm
i.e.
TCODE - SE80
Choose - Function Group ,it wil ask to create..
Create and then activate..give a name starting with Z .
Other way is go to tcode SE37.
In the menu,there is a option in sub menu for creating function group.
Just create it by clicking that and give names starting with z or y. -
How to create Drop down menu in the selection screen
Hi all,
How to create Drop down menu in the selection screen.
Fast answer will be highly rewarded
Regards
Bikashi ,
TYPE-POOLS : vrm.
TABLES:vbak,vbap.
DATA : v(80) TYPE c.
DATA: wa_vbak TYPE vbak,
it_vbak TYPE vbak OCCURS 0 WITH HEADER LINE,
wa_vbap TYPE vbap,
it_vbap TYPE vbap OCCURS 0 WITH HEADER LINE.
DATA: l_name TYPE vrm_id,
li_list TYPE vrm_values ,
v_count TYPE i,
l_value LIKE LINE OF li_list.
PARAMETERS: p_test(20) AS LISTBOX VISIBLE LENGTH 60 MODIF ID DAT.
INITIALIZATION.
AT SELECTION-SCREEN OUTPUT.
PERFORM get_data.
LOOP AT it_vbak.
l_value-key = it_vbak-vbeln .
l_value-text = it_vbak-vbeln .
APPEND l_value TO li_list.
ENDLOOP.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = 'P_TEST'
values = li_list
EXCEPTIONS
id_illegal_name = 1
OTHERS = 2.
AT SELECTION-SCREEN ON P_TEST.
clear : li_list , li_list[].
SELECT vbeln
matnr
meins
FROM vbap
INTO CORRESPONDING FIELDS OF TABLE it_vbap
WHERE vbeln = p_test.
START-OF-SELECTION.
SELECT vbeln
matnr
meins
FROM vbap
INTO CORRESPONDING FIELDS OF TABLE it_vbap
WHERE vbeln = p_test.
LOOP AT it_vbap.
WRITE :/ it_vbap-vbeln, it_vbap-matnr,it_vbap-meins.
ENDLOOP.
*& Form get_Data
text
--> p1 text
<-- p2 text
FORM get_data .
SELECT vbeln
FROM vbak
INTO CORRESPONDING FIELDS OF TABLE it_vbak.
ENDFORM. " get_Data
regards,
venkat.
Maybe you are looking for
-
Hello, I'm fighting a TERRIBLE problem with my Aperture library and I'd love to see if any of you might be able to help. I've got a library with about 40,500 images. All of them are referenced and I've moved through a couple of different storage driv
-
Black border in exported video
When I am in presentation mode I see picture in the correct ratio without border. But exported video with same configuration have black border. (Source images have small size then output video.) I need output video without border as in preview...
-
JAVADOC Problem in Netbeans 5.0
JAVADOC won't work in Netbeans 5.0 when i try to add it in the Library Manager, Platform Manager. But it works well in JCREATOR. Why is that?
-
Do we need to include OLB (object library file) in production form path?
Hi, I would like to ask if a form being compiled that consist of record group defined in object library file (olb), do we need to release the OLB to production form path as well?
-
Hi all I'm a newbie to DW and website development. I built my first ever website using AP Divs. All good. But then wanted to include a footer that would always be at the bottom of the site (when there's not much content to be pushed to the bottom of