How to create a group and add class instances to that group using VSAE

how can i create a group in VSAE and add the objects to the group that too instances of a class.
should i use the ID of the object or some other rule to add members to that group
Thanks & Regards, Suresh Gaddam

Hi,
The below links should be helpful for you to create group in VSAE:
Computer and Instance Group Fragments in VSAE
http://blog.scomskills.com/create-a-computer-or-instance-group/
Create a Group of Health Service Watcher Objects Using VSAE
http://blog.scomskills.com/create-a-group-of-health-service-watcher-objects-using-vsae/
SCOM VSAE – Custom Dynamic Computer Groups Based On Server Registry Keys
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

How to create a control and add it to a page layput

I am reading the following link :-
http://www.itidea.nl/index.php/what-about-you-must-fill-out-all-required-properties-before-completing-this-action-when-publishing-a-page/
which says that i need to create a control and add it to a page layout. but can anyone help me in understanding how i can create a user control and add them to page layout ?
Thanks

> First problem i could not find a User Control (Farm Solution only) under the Office/SharePoint section
if you mean New item in Visual Studio, then check it under general Web category. User controls are basic ASP.Net functionalities, not Sharepoint-specific. If it is not there, you may use the following trick:
1. Create new project in other VS instance using "ASP.Net Empty Web Application" template
2. Add new user control there (in this project type it should exist for sure under Web category. Called "Web User Control")
3. Copy all user control's files to the folder of your Sharepoint project (ascx, ascx.cs, ascx.designer.cs)
4. In VS instance with Sharepoint project add existing items: all copied user control files. They should be grouped under ascx file automatically after that
> The type or namespace name 'TaxonomyFieldControl' could not be found (are you missing a using directive or an assembly reference?)"
you need to add reference to Microsoft.SharePoint.Taxonomy.dll assembly, which is located in the GAC (assume that you have installed Sharepoint on your dev env)
Blog - http://sadomovalex.blogspot.com
Dynamic CAML queries via C# - http://camlex.codeplex.com
thanks a lot for your help. so can i do the following steps:-
I follow these steps to deploy a user control.
using Visual Studio 2012 , i added a new Farm solution.
then inside the farm solution i added a new User Control(Farm Solution Only).
3. inside the user control i entered the following code:-
using Microsoft.SharePoint;
using Microsoft.SharePoint.Taxonomy;
using Microsoft.SharePoint.WebControls;
using System;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
namespace WikiPopUp.ControlTemplates.WikiPopUp
[ToolboxData("<{0}:CustomValidationRequiredFieldsOnPage runat=server></{0}:CustomValidationRequiredFieldsOnPage>")]
public class CustomValidationRequiredFieldsOnPage : WebControl
protected override void CreateChildControls()
base.CreateChildControls();
if (SPContext.Current.FormContext.FormMode == SPControlMode.Edit)
bool arethere = AreThereAnyMissingRequiredFieldsOnPage();
if (arethere)
//SPPageStateControl:
//Provides an ASP.NET control that handles the Ribbon buttons controlling the state of a Microsoft SharePoint Server wiki or publishing page,
//such as the CheckInCheckOutButton or the PublishingButton.
SPPageStateControl baseParentStateControl = Page.Items[typeof(SPPageStateControl)] as SPPageStateControl;
//Publish button: SPListItem MissingRequiredFields checks this.FieldHasValue(link.Name, field);
//the field is empty (which is right) when the page is first created (MMD field is never filled in)
//when the field was once filled, saved and emptied the field in sp code still has the previous value and the check MissingRequiredFields succeeds
//after succeeding this check the page is validated (this.Page.Validate()) and this one fails which results SP validating the page as the Save button does
if (baseParentStateControl.HasError)
//this overwrites the previous PageErrorState
//and validates the page
//no popup anymore and status updates in yellow area
baseParentStateControl.EnsureItemSavedIfEditMode(false);
else
//there are missing fields at this listitem, but they're not on the page
//do nothing here, because the SerializedErrorState contains the navigate url to the Edit Properties page
//and a message pops up
/// <summary>
/// Check if required fields are missing which are present at the page
/// </summary>
/// <returns></returns>
private static bool AreThereAnyMissingRequiredFieldsOnPage()
foreach (Control control in SPContext.Current.FormContext.FieldControlCollection)
//get the control type
string type = control.GetType().Name;
FieldTypes controlType = (FieldTypes)Enum.Parse(typeof(FieldTypes), type);
switch (controlType)
case FieldTypes.TaxonomyFieldControl:
TaxonomyFieldControl tfc = control as TaxonomyFieldControl;
if (!tfc.IsValid)
return true;
break;
default:
break;
return false;
enum FieldTypes
DateTimeField, FieldValue, TextField, RichImageField, NoteField, RichHtmlField, PublishingScheduleFieldControl, TaxonomyFieldControl, BooleanField, ComputedField
4. i add a reference for the Sharepoint.taxnomy
5. then i deploy the solution to my site collection. and now i can see the new solution inside the farm solution under central administration.
but not sure if these are all the required steps to register the user control or still i need to do extra steps ?

How to create a package and add a file?

Hi all,
I am new to Java and very much much confussed with how to create a package and then include some files any help will be very thankfull.
Thanks for your help
kka.

Steps for creating a package in java are as follows:
Choose a base directory for your classes. For example, you might choose c:\java\packages. Type the following command:
set CLASSPATH=%CLASSPATH%;c:\java\packages
Create subdirectories for each chapter or section, if you don't already have them.
For each of the classes in the subdirectories, add the following line to the very top of each file:
package directory-name;
where directory-name is the name of the subdirectory the class file is located in.
In other directories you may have class files that need to access one of the classes in another directory (package). To do this, write one of the following at the top of the class that needs the other class:
import subdir.*;
or
import subdir.classname;
Use the class by name in the new class file.
Note that you can create sub-packages by creating subdirectories of the original subdirectories, and inserting package statements at the top of the java files in those directories.
Hope this helps!

How to create a site and add security groups through code: scripts, csom, ... ?

Hi,
I'm new to CSOM and are looking for a way to create sites in SharePoint Office365 and especially add user to it with a specific role eg. 'visitor' or 'owner'.
I use this code to add sites from a csv file, so far so good.
But now I want to add security groups based on the csv file and assign a role. The security groups allready exists.
and also how to add a user with a 'owner' role for some sites.
That would make my life easier :-)
so thank you in advance!
# load assemblies
#[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint.Client")
#[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint.Client.Runtime")
Add-Type -Path "c:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\ISAPI\Microsoft.SharePoint.Client.dll"
Add-Type -Path "c:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\ISAPI\Microsoft.SharePoint.Client.Runtime.dll"
# site collection
$siteUrl = “https://mysharepoint.com”
# admin
$username = "[email protected]"
$password = Read-Host -Prompt "Enter password" -AsSecureString
# get clientcontext as object
$ctx = New-Object Microsoft.SharePoint.Client.ClientContext($siteUrl)
# assign credentials to clientcontext object
$credentials = New-Object Microsoft.SharePoint.Client.SharePointOnlineCredentials($username, $password)
$ctx.Credentials = $credentials
# create site from template 'teamsite' => STS#0
$data = Import-Csv "c:\tools\CSOM\vakwerking_test.csv"
foreach ($row in $data) {
$webCreationInformation = New-Object Microsoft.SharePoint.Client.WebCreationInformation
$webCreationInformation.Url = $row.vakwerkingurl
$webCreationInformation.Title = $row.vakwerkingnaam
$webCreationInformation.WebTemplate = "STS#0"
$webCreationInformation.UseSamePermissionsAsParentSite = $false
$newWeb = $ctx.Web.Webs.Add($webCreationInformation)
Write-Host "Title" $newWeb.Title
#send to sharepoint
$ctx.Load($newWeb)
$ctx.ExecuteQuery()

Hi,
The command above about creating a group only works for the root site of the site collection, because the scope of the user group is site collection level, these groups
can be used in all the sites in this site collection.
With the existing groups in the root site, we can add users into them and grant specific permissions of a specific sub site to these groups.
Here is a demo about how to assign permission to a group using Client Object Model(though in C#) for your reference:
http://www.c-sharpcorner.com/UploadFile/54db21/set-permission-to-group-in-sharepoint-2010-programmatically/
Best regards,
Patrick
Patrick Liang
TechNet Community Support

How to create a group using photoshop scripting?

Hey guys,
I can create a layer easily by the below code.
but how can i create a group that contain more than one layer.
var docRef = app.documents.add();
var myLayer = docRef.artLayers.add();

Here is an example..
var doc = app.documents.add();
var newLayerSet = doc.layerSets.add();
var myLayer = doc.artLayers.add();
var myLayer2 = doc.artLayers.add();
//move the layers into the layerset
myLayer.move(newLayerSet, ElementPlacement.INSIDE);
myLayer2.move(newLayerSet, ElementPlacement.INSIDE);

How to create user group using Visual Admin Tool

Hi
I am trying to configure the Adobe Service in WAS.As part of this process,i supposed to create the Hroup Called "ADSCallers".In document it suggested to go Servcer>Services>Security Provider.In that i selected UserManagement Engine Tab,but there "Create User","Create Group" buttons are disabled.so how to enable it so that i can create the groups/users there.please help
Thanks
Prasad

Hi,
Did you change the display mode to change mode by clicking
the "pencil" icon on the top left corner of the screen?
Best Regards
Srikishan

How to create a Bookmark and set action to a named destination using Acrobat SDK?

I want to create a bookmark using JSO and set it Bookmark Action to a Named Destination. I am able to select required required paragraph/section using PDTextselect, create a bookmark using JSO but I am not able to set Bookmark Action to a Paragraph/section. Can anyone help me out to set Bookmark Action to a Paragraph/Section. I don't know how to create Named Destination.

What if we select required text and by ussing App method
MenuItemExecute call "Highlight Selected Text".
But what is the Menu Item Name of "Highlight Selected Text" under Tools>Comment & Markup>Text Edit.

How to create a table and add columns to it with a stored procedure

Hi,
I hope that someone can help me.
I want to create an empty table with the same columns as another
table but with 4 columns more.
So it's actualy a copy of a table but with 4 added columns.
I have to do it in a stored procedure but I don't know which
statements I have to use. I need to give 3 parameters : schema,
table and prefix(e.g. the pers from column pers_number)
Can someone help me?
Thanks in advance, Ann

you can !!
here is some examples
DECLARE
sql_stmt VARCHAR2(200);
plsql_block VARCHAR2(500);
emp_id NUMBER(4) := 7566;
salary NUMBER(7,2);
dept_id NUMBER(2) := 50;
dept_name VARCHAR2(14) := 'PERSONNEL';
location VARCHAR2(13) := 'DALLAS';
emp_rec emp%ROWTYPE;
BEGIN
EXECUTE IMMEDIATE 'CREATE TABLE bonus (id NUMBER, amt
NUMBER)';
sql_stmt := 'INSERT INTO dept VALUES (:1, :2, :3)';
EXECUTE IMMEDIATE sql_stmt USING dept_id, dept_name, location;
sql_stmt := 'SELECT * FROM emp WHERE empno = :id';
EXECUTE IMMEDIATE sql_stmt INTO emp_rec USING emp_id;
plsql_block := 'BEGIN emp_pkg.raise_salary(:id, :amt); END;';
EXECUTE IMMEDIATE plsql_block USING 7788, 500;
sql_stmt := 'UPDATE emp SET sal = 2000 WHERE empno = :1
RETURNING sal INTO :2';
EXECUTE IMMEDIATE sql_stmt USING emp_id RETURNING INTO salary;
EXECUTE IMMEDIATE 'DELETE FROM dept WHERE deptno = :num'
USING dept_id;
EXECUTE IMMEDIATE 'ALTER SESSION SET SQL_TRACE TRUE';
END;

How use jndi to create a organization and add a user to it.(ÈçºÎ´´½¨Ò»¸ö×éÖ¯µ¥Î»)

how use jndi to create a organization and add a user to it¡£THANKS£¡
ÈçºÎ´´½¨Ò»¸ö×éÖ¯µ¥Î»,²¢½«Ò»¸öÓÃ»§Ìí¼Ó½øËü¡£Ð»Ð»£¡

Hi,
The command above about creating a group only works for the root site of the site collection, because the scope of the user group is site collection level, these groups
can be used in all the sites in this site collection.
With the existing groups in the root site, we can add users into them and grant specific permissions of a specific sub site to these groups.
Here is a demo about how to assign permission to a group using Client Object Model(though in C#) for your reference:
http://www.c-sharpcorner.com/UploadFile/54db21/set-permission-to-group-in-sharepoint-2010-programmatically/
Best regards,
Patrick
Patrick Liang
TechNet Community Support

How to create checkbox group and table dynamically?

HI All
How to create checkbox group and table dynamically?
Regards
Ravi

hi
check this links for creating tables dnamically
How to Create a table dynamically?
Re: how to create a table dynamically in webdynpro
and for checkboxgroup
IWDTransparentContainer rootContainer =
(IWDTransparentContainer)view.getElement("RootUIElementContainer");
IWDCheckBox check = (IWDCheckBox)view.createElement(IWDCheckBox.class,"Check"+k);
//Here "check"+k k represents a unique value every time u create so that u wont get a duplicate instance
check.setChecked(false);
rootContainer.addChild(check);
or Re: adding checkboxes dynamically

I want to know what I need and then how to take a pdf form I created in word and add the blue boxes so that anyone can type into my form

I want to know what I need and then how to take a pdf form I created in word and add the blue boxes so that anyone can type into my form

Hey john@adobe,
Could you please specify how exactly have you created your form.
You might need to have Acrobat installed on your computer to convert a word document to PDF.
Do you have Acrobat installed? If yes, what version? If no, then please try using the trial version of Acrobat DC (latest version) and access its features:
Download Adobe Acrobat free trial | Acrobat Pro DC
Also, let me know what kind of blue boxes are you talking about.
If you want others to edit your PDF form, then you need to make it a fillable form by choosing 'Form Editing' option from Tools pane.
Let me know more on this so that I can help you out.
Regards,
Anubha

How to create secutiry filters and users, groups in system 9

HI,
Could you please help me how to create security filters and groups, users in system 9. I need it very ugent. i am very much thankful to you.. if you respond immediatly.
Thanks,
sudhakar.

In short here's how I did it in 9.3.1 but there are multiple ways to do it.
I'm using MSAD external authentication.
Using EAS right click on database, Edit, Filters. Create your filters.
Then go to Shared Services.
Find the MSAD user/group and provision them to the Essbase database that you have your filters on. Access level is "Filter".
Then go back to EAS and Refresh Security From Shared Services.
Then go back to Shared Services.
Navigate to Projects & then your Essbase server. Find your Essbase database and click on it. To the right it'll populate a list of all the users/groups you provisioned to above. Select all of them and click Next.
Now you should see a drop down at the top showing your filter(s). Click the checkbox(s) next to the users/groups you want to apply that filter to. Click the green checkmark to apply the filter, and repeat for your various filters that you want to apply. Only 1 filter per user/group.
Then go back to EAS and Refresh Security From Shared Services again.
Good luck, hope this helps.

How to create a group calendar?

Hello,
i am sorry but this is one more question on wiki-group-calendars.
*In short:*
I am not able to create a group calendar with the wiki frontend. the calendar that is created with a wiki is owned by the admin of the wiki. So it is always a personal calendar that cannot be shared in iCal.
LONG:
I want to create a group calendar that is viewed and edited through iCal.app and the web service. Apple´s "wiki deployment" guide says on page 57:
+"The web calendar allows you to easily schedule events for yourself or your group. ...+
+There are *two types of web calendars: personal and group*. You can send and receive event invitations through the personal calendar but not through the group calendar. Also, *while anyone in a group can create or edit events in a group calendar*, you can edit only events in your own personal calendar or event invitations you send to other people.+
+The web calendar uses iCal Server to store events and invitations. ..."+
But there is not mentioned how to create a group calendar. The calendar created with the wiki web-frontend belongs to the admin of that particular wiki. This is why the calendar data ist stored in folder named with the UUID of the wiki admin. Also the alias "http://server.fqdn:8008/principals/groups/mygroupname/" which i provided in iCal turns into ..._uids_UUID-of-the-wiki-admin and only the wiki-admin can access this calendar in iCal.app.
My research on this topic reveals that there were in issue that should be resolved in 10.6.4 (that is running on our Server). So, again, how to create a group calendar?
Thanks, Philipp.
10.6.4 OSX Server
10.6.x Clients

farmer tan wrote:
you need to go to the wiki page and add the wiki's there and then in the setting of the wiki is where you set permissions and services such as calendar, blog, and podcast you can also set all permissions for the wiki in the settings tab
fyi none of my groups were available unless i logged into the wiki as the Directory Admin not Server Admin
migrated from 10.5.7 to 10.6
Message was edited by: farmer tan
Could you be more specific farmer tan, please?
You said "you need to go to the wiki page and add the wiki's there...." What is the "wiki page" you mention? Is that some place I go to via the browser or the Server Admin tool?
I went to http://ical.mysite.com/ical/ and logged in as the Directory Administrator but didn't see anything resembling what you described.
Thanks in advance for any help you can provide.

How to create a group mailing list in JavaMail?

Hello,
I've been searching through the entire API, specifically the InternetAddress class and I can't seem to find out how to create a group/mailing list. Does anyone know how to do this?
That is, I would like to be able to group a bunch of e-mail addresses together and give that group a name "my friends". Then send it off using this 'group mail address' as opposed to an array of InternetAddress[]. Then when the recipients receive the e-mail, they see "my friends" in the To: field, instead of everyone's e-mail address...
Is this possible in JavaMail? I've tried many things like creating an InternetAddress object passing in a comma-delimited list of e-mail addresses but it doesn't like it.
Thanks in advance!

Hi:
I have the same problem. I've read JavaMail implements RFC 822 which allow mailing lists. But, �how can I implement it with JavaMail?
Best regards,
Fabio Galarraga.

How to create a group including several roles?

Hi experts,
Hereby a simple question but urgent, that is, how to create a group in portal which includes several roles. For exemple a group for manager contented the roles for managers and another group for employees. Thus it simplifies the role assignment for any user.
Thanks and with great appreciations

Hi! wuyia,
to create a group and assigining the roles to the group, you will need the userAdministrator role in the portal.
1.Go to userAdministrator role.
2.click on group workset and create a new Group
3.click on Role workset and search the role which you want to assign to the group.
4.edit the role and add your group to this role.
5.click on save button.
regards,
Mithilehwar

How to create a group and add class instances to that group using VSAE

Similar Messages

Maybe you are looking for