How to create a matrix-view on the panel? (crossed lines)

Hello,
i have PCI-card which is a matrix with lets say 50 rows and 10 columns. How can i show this on a labview panel?
I have there lines of course and can place 50 horizontal and 10 vertikal together, but how can i do this that i can click on the position where to lines are crossed that after this there is a point shown (to represent a closed switch)?
The only workaround currently is to use 500 small buttons and put them very near together.
Thanks for help
using LV2012

Hi,
I think you should use a table control : create an event "table : mouse down", and convert the position given (using an invoke node) to the cell clicked.
Then connect the two channels, and color the cell in green to show that this point is connected. You can add a text in the cell like X1-Y30 to be sure to click on the good cell.
I hope this wil help you to find your solution.
Best regards,
V-F

Similar Messages

How to create a normal view from the RDF sparql query?

Hi,
I am trying to create a view from the below query.
select id, name from table(SEM_MATCH('
(?id rdf:type dm:Conceptual_SMA_Information_Group)
(?id dm:hasConceptualSmaInformationGroupName ?name)',
SEM_Models('nyc_sma_curr'), null,
SEM_ALIASES(SEM_ALIAS('dm','http://www.cdse.com/sbip/dwh/mdm/data_modeling#')), null))
order by name,id;
I am trying the below syntax to create a viewa but its giving the error and m unable to create view.
create view Information_Group as
select id, name from table(SEM_MATCH('
(?id rdf:type dm:Conceptual_SMA_Information_Group)
(?id dm:hasConceptualSmaInformationGroupName ?name)',
SEM_Models('nyc_sma_curr'), null,
SEM_ALIASES(SEM_ALIAS('dm','http://www.cdse.com/sbip/dwh/mdm/data_modeling#')), null))
order by name,id;
Error: ORA-00600: internal error code, arguments: [17046], [0x46E62D720], [0x46F2485F0], [1], [], [], [], [], [], [], [], []
Please help me to create a view.
Let me know if you need more details.
Regards,
Kavitha.

Hi,
This is a known issue in 11.1 (RDBMS Bug 6688356).
Please contact Oracle Support to get the patch for this bug. Alternatively, you can upgrade to release 11.2.
Thanks,
Matt

How to create a matrix with constant values and multiply it with the output of adc

How to create a matrix with constant values and multiply it with the output of adc

nitinkajay wrote:
How to create a matrix with constant values and multiply it with the output of adc
Place array constant on diagram, drag a double to it, r-click "add dimension". There, a constant 2D double array, a matrix.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

How to create a Custom List without the column "Title" ?

Maybe this one is easy as it sounds, I just want to know how to create a little list for my SharePoint application featuring 3 columns:
1 - User Name (this should be Person type - UNIQUE + Required)
2 - Report (Memo - Required)
3 - Status (Choice + Required)
The list will be used to allow the users to submit a weekly report and I don't want to include the title because there is no use to me, I know I can hide the column by customizing the list but this sounds very amateur even for a newbie like me (yeah... sounds
so cheap!), since I've been reading a lot about custom content types and I still didn't get the chance to use this properly I was wondering how I could put them to use and I guess the example here would be the best right?
I really spent some time trying but I always end getting the Title even when I try to use custom content types so I'm really giving up and asking for some help at this point.
Thanks a lot for the help!!!

Yes, you can do that. If you need a different content type with your custom fields. Following are the steps : http://www.dotnetcurry.com/ShowArticle.aspx?ID=620
After creating your custom Content Type, Click on the 'Title' filed in your custom content type.
In the 'Column Settings' make it 'Hidden (Will not appear in forms)' and click ok.
Now add this content type to your list/library.
In the list/Library go to setting and 'Advance settings' and make the 'Allow management of Content Type?' as 'yes' and click ok.
Now make default content type not visible from 'Change new button order and default content type' link in the settings page of list/library, and your contet type as 'Default'.
Create a new view, remove the 'Title' field and make that view as 'dafault' view, you can delete the 'All Items' view also if required.
Now whenever user come to that list/Library they will not see the title column and also will not appear in the 'New Item'.
Note : The 'Title' field is mandatory in all the list/library and by default added to the 'All Item' view. So, by doing above steps you are creating a new content type where 'Title' is not mandatory and also not added in default view.
get2pallav
Please click "Propose As Answer" if this post solves your problem or "Vote As Helpful" if this post has been useful to you.

How to create a help view for a customized error message

Hi all,
Can you guide me how to create a help view for a customized error message, we need to put some suggestions in it so that user can can resolve this issue with this guide. ( the short text is too short to describe all situations via TC:SE91)
Thanks very much!
Bruce, Wen

Hi Bruce,
Could you brief your concerns again.
Why don't you maintain long text in message class for long description.
Regards,
Ranjith N

Create a defaut view for the MS Project Server 2010 client

Dear Forum,
how can I create a defaut view for the MS Project Server 2010 client?
I saved a template and set a default view under File -> Options ->Project View. I also did the same in the checked-out enterprise global. If I then close the client and re-open it my default view changes back again to the previous one (not the view
I set as a default view).
What explains this behaviour and what can I do? Any hints?
Thank you very much for your help!

Scheduler007 --
The view you selected by clicking File > Options > Project View is the default view for every new project you create from a blank project template. This is a global option, so setting it from the checked out Enterprise Global file serves no purpose.
When you select a view as your default view, you will see that view applied to the blank project that is opened when you launch Microsoft Project 2010, and you will see it applied if you create new blank projects. If you create enterprise templates for
people to use in your organization, you should simply apply the view to the template that you want as the default so that users will see this view immediately when they create a new project from the template. In addition, if you apply a view to an open
project, close and check in the project, and then reopen the project, you will see the last view applied in that project (as Guillaume correctly points out).
Beyond this, there is no method possible for the Project Server administrator to specify a default view for the Microsoft Project application used by the project managers in your organization. This is an option each PM must set. Hope this helps.
Dale A. Howard [MVP]

Creating a Mat View having the same name with that of the table name

Hi everyone,
After dropping the mat view name "QQ.TRDLN_DIM_MV", I'm trying to re-create it by having the same name as that of the table but I got an error stating that "name is already used by an existing object". How can create a mat view to look like the object owned by schema "GQ", having a name that is the same as that of the table name, without dropping the table?
OWNER_O OBJECT_TYPE CREATED LAST_DDL_ TIMESTAMP STATUS OBJECT_NAME
===
GQ MATERIALIZED VIEW 05-NOV-08 13-DEC-08 2008-11-05:06:31:46 VALID TRDLN_DIM_MV
GQ TABLE 05-NOV-08 15-DEC-08 2008-11-05:06:31:00 VALID TRDLN_DIM_MV
QQ TABLE 17-AUG-07 16-MAR-09 2007-08-17:17:05:21 VALID TRDLN_DIM_MV
SQL>CREATE MATERIALIZED VIEW QQ.TRDLN_DIM_MV
2 TABLESPACE FPLC01S
3 NOCACHE
4 NOLOGGING
5 COMPRESS
6 PARALLEL ( DEGREE 2 INSTANCES 1 )
7 BUILD IMMEDIATE
8 REFRESH FORCE ON DEMAND
9 WITH PRIMARY KEY
10 AS
11 select /*+ NO_REWRITE */ trdln_id,
12 trdln_skid,
13 trdln_end_date,
14 first_value(trdln_end_date) over (partition by trdln_id order by trdln_end_date DESC) as MaxDate
15 from QQ.trdln_dim;
from QQ.trdln_dim
ERROR at line 15:
ORA-00955: name is already used by an existing object
I appreciate your help. Many thanks in advance!
Regards,
Radic

You'd have to rename the table (using ALTER TABLE tablename RENAME TO othername; ) before you create the MV.
You can't have both existing with the same name in the same schema.
What you see in the GQ schema is that the "table" is the underlying table for the Materialized View.
When you do a CREATE MATERIALIZED VIEW MY_MV AS ...
Oracle creates two objects with the same name, one being the Materialized View MY_MV and the other being the table MY_MV which is the physical storage. {Remember that a Materialized View is a means of getting a physical representation of a View}.
In the QQ schema what you have is either
a. a real Table
or
b. an improperly dropped MV, resulting in the underlying Table still present.

How to create a matrix report on Apex 4.1

Hi all.
I need to create a report similar to this one:
Jan Feb Mar .....
Product Category
Category One 999 999 999
Category Two 999 999 999
On a reporting tool like Oracle Reports, this is call a matrix report which can be easily created: just one simple query , select a matrix report type, compute summary values for row /column and grand total, and that is.
How would one implement this on Apex 4.1???
Have a couple of ideas:
- Populate temporary table with columns corresponding to month.
- Create a procedure that return a collection and use that as a source for report.
- Etc.
What other options do i have ...?
Thanks in advance ...!

Hi all,
I did create a matrix report using the pivot function and some interesting settings in APEX. So far it is only does display data. I did not find a way yet(?) to alter the data in the same matrix.
The data is based on a simple set of tables about planning. The end result does look something like the matrix below. Note: the dashes are just there to make the matrix look like a matrix on this forum.
Resource 13-08 20-08 27-08 03-09 10-09 17-09 24-09
Angelo-----25-----22-----12-----10------------------------
John---------8-----22-----36-----22------------------------
Marit-----------------5-----40-----36-----24-----12-----10
The resources (Angelo, John and Marit) are being registered in the following table:
CREATE TABLE EVP_RESOURCES
RSS_ID NUMBER(10,0) NOT NULL,
NAME VARCHAR2(25 BYTE) NOT NULL
The date periods (13-08 till 24-09) are being registered in the next table:
CREATE TABLE EVP_DATA_POINTS
DPT_ID NUMBER(10,0) NOT NULL,
DATA_POINT_DATE DATE NOT NULL,
V_DATA_POINT_DATE_FORMATED VARCHAR2(75 BYTE) GENERATED ALWAYS AS (TO_CHAR("DATA_POINT_DATE",'dd-mm')) VIRTUAL VISIBLE
The virtual column (v_data_point_date_formated) is not needed. You can use this virtual column or format the column in multiple places.
The available units are being registered in the intersection table below:
CREATE TABLE EVP_RESOURCE_PLANNING
RPG_ID NUMBER(10,0) NOT NULL,
DPT_ID NUMBER(10,0) NOT NULL,
RSS_ID NUMBER(10,0) NOT NULL,
UNITS NUMBER(10,0)
The data is being displayed in APEX in a report region of type "SQL Query (PL/SQL function body returning SQL query)". And the following option has to be switched on "Use Generic Column Names (parse query at runtime only)".
This does give a restriction on the number of columns which can be used. You can however change the number of columns in the field "Maximum number of generic report columns:" to a high number. So in most cases this is no issue at all.
In the Region Source I did put the following code:
begin
return 'select *
from ( select rss.name "Resource"
, v_data_point_date_formated
, rpg.units
from evp_resources rss
, evp_data_points dpt
, evp_resource_planning rpg
where rpg.dpt_id = dpt.dpt_id
and rpg.rss_id = rss.rss_id
pivot (sum(units) for v_data_point_date_formated in (' ||
evp_pkg_dpm.f_dynamic_pivot_in ||
order by 1';
end;
The function evp_pkg_dpm.f_dynamic_pivot_in does return a string which is based on the number of rows in the table evp_data_points. In my case this string is: '13-08' as "13-08",'20-08' as "20-08",'27-08' as "27-08",'03-09' as "03-09",'10-09' as "10-09",'17-09' as "17-09",'24-09' as "24-09". If you ommit the 'as "..."' you do get quotes in your headings.
Enjoy and regards,
Jurgen
PS: let me know if something is missing or not clear!
Edited by: user553427 on Aug 17, 2012 5:46 AM (Query has been made more simple and I build up the header differently)

How to create a relational view base on an xmltype table which included sev

Hi,
I am using oracle 11.2.0.1.0.
how to create a relational view base on an xmltype table which content several different .xml files?
Thanks.
for examle:
SQL> SELECT OBJECT_VALUE FROM document;
Edited by: Cow on Jan 6, 2011 7:57 PM

For example I already have these three xml files inserted into the document xmltype table.
These xml files have same schemas. I have attached below.
I want to show all elements/attribute values in xml files to relational view.
Is this possible to create one big relational view to show everything
or I have to create three separate relation views then use UNION to put together? Thanks a lot. Cow
<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet href="http://www.accessdata.fda.gov/spl/stylesheet/spl.xsl" type="text/xsl"?>
<document xmlns="urn:hl7-org:v3" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="urn:hl7-org:v3 http://localhost:8080/home/DEV/xsd/spl.xsd">
<id root="5ca4e3cb-7298-4948-8cc2-58e71ad32694"/>
</component>
</document>
<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet href="http://www.accessdata.fda.gov/spl/stylesheet/spl.xsl" type="text/xsl"?>
<document xmlns="urn:hl7-org:v3" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="urn:hl7-org:v3 http://localhost:8080/home/DEV/xsd/spl.xsd">
</component>
</document>
Edited by: Cow on Jan 4, 2011 9:51 AM

How to create some columns dynamically in the report designer depending upon the input selection

Post Author: ekta
CA Forum: Crystal Reports
how to create some columns dynamically in the report designer depending upon the input selection
how export this dynamic report in (pdf , xls,doc and rtf format)
report format is as below:
Element Codes
1
16
14
11
19
10
2
3
Employee nos.
Employee Name
Normal
RDO
WC
Breveavement
LWOP
Sick
Carers leave
AL
O/T 1.5
O/T 2.0
Total Hours
000004
PHAN , Hanh Huynh
68.40
7.60
76.00
000010
I , Jungue
68.40
7.60
2.00
5.00
76.00
000022
GARFINKEL , Hersch
66.30
7.60
2.10
76.00
In the above report first column and the last columns are fixed and the other columns are dynamic depending upon the input selection:
if input selection is Normal and RDO then only 2 columns w'd be created and the other 2 fixed columns.
Can anybody help me how do I design such report....
Thanks

Hi Developer life,
According to your description that you want to dynamically increase and decrease the numbers of the columns in the table, right?
As Jason A Long mentioned that we can use the matrix to do this and put the year field in the column group, amount fields(Numric values) in the details, add an filter to filter the data base on this column group, but if
the data in the DB not suitable to add to the matrix directly, you can use the unpivot function to turn the column name of year to a single row and then you can add it in the column group.
If there are too many columns in the column group, it will fit the page size automatically and display the extra columns in the next page.
Similar threads with details steps for your reference:
https://social.technet.microsoft.com/Forums/en-US/339965a1-8cca-41d8-83ef-c2548050799a/ssrs-dataset-column-metadata-dynamic-update?forum=sqlreportings
If your still have any problem, please try to provide us more details information, such as the data structure in the DB and the table structure you are currently designing.
Any question, please feel free to let me know.
Best Regards
Vicky Liu

How to create a purchase requisition from the EP

1. How to create a purchase requisition from the EP & What are the pre-requiste?

Hi,
You need to create a SAP transaction iview for purchase requisition transaction and link it to the role and to the user to view purchase requisition transaction.
First you need to create a system in portal to link to the R/3 system. For creating system check this link.
http://help.sap.com/bp_epv260/EP_EN/documentation/EP/N03_BB_InstallGuide_EN_US.doc
For linking portal with R/3 and view the Purchase requisition check this link
Configuring EP for connecting to SAP R/3
Regards
Arun

How to create a query view in sap bw?

can any one please tell me how to create a query view in sap bw 3.5?

Hi,
you can do this by using Bex analyzer and WAD ..
gop through this link ..
http://help.sap.com/saphelp_nw70/helpdata/en/0e/1339427f82b26be10000000a155106/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/0d/af12403dbedd5fe10000000a155106/frameset.htm
hope this helps you ..
Reagrds,
shikha

How to create a tree view in adobe configurator

Hi
How to create a tree view in adobe configurator
Thanks

Please, can you explain what you mean exactly?

How to create a record based on the name of a file in the file-system?

Hi,
With a lot of pictures I want to have a database to gather some information about these pictures.
First question is how to generate a record based on a file in the file system?
e.g. the pictures are "c:\fotos\2009\01\disc_001.jpg" to "c:\foto\2009\01\dis_98.jpg" .
now i want to create records with as one of the attributes the name of the picture (not the picture itself). how to create these records (based on the information of the file-ssytem). i.e. the number of records should be the same as the number of pictures.
any suggestions?
any reaction will be appreciated.
Leo

Link to Create directory
http://www.adp-gmbh.ch/ora/sql/create_directory.html
You can create a list of files in the directory and read the list files from that directory.
[UTL_FILE Documentation |http://download.oracle.com/docs/cd/B14117_01/appdev.101/b10802/u_file.htm#996728]
[Solution using Java|http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:439619916584]
SS

How to create multi garnishment order for the same garnishment document

Hi,
Can anyone tell me how to create multi garnishment order for the same garnishment document. I tried to copy the entry in IT0195 but the sequence field is grayed out so it will just delete the old record. What configuration should I do to make this possible?
Thanks a lot in advance.

hi,
As far as I got it.
You cannot have multiple Garnishment order but if a need arises you have to maintain it in IT216.
For that follow this path goto PA30->pernr->194->change->Garnishment->adjustment.
Since like order you cannot maintain adjustment also directly.
Regards,
Amit
Reward all helpful replies.

How to create a matrix-view on the panel? (crossed lines)

Similar Messages

Maybe you are looking for