How to create a new check box using form personalization.

Hi Frs,
I have a requirement to create a new check box in AP form using form personalization.
Pls help me in achieving this.
Note: we have to use only form personalization not custom.pll.
Thanks
Rajesh

Pl see ML Doc 420518.1(Limitations of Forms Personalization) for a list of things you cannot do with personalization - among them is creating new form objects such as checkboxes.
HTH
Srini

Similar Messages

  • How to create a new excel file using Excel Destination when Destination file not exists.

    how to create a new excel file using Excel Destination when Destination file not exists.

    Just need to set an expression for excel connectionstring and set delay validation to true and it will create it on the fly.
    The expression should return the full path with dynamic filename in each case.
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • How can we disable Block Level Trigge using Form Personalization

    Hi,
    I want to disable block level trigger(WHEN-NEW-RECORD-INSTANCE) using forms personalization at responsibility level.
    Can any one please give me the answer.
    it's urgent
    Thanks and Regards,
    Dhana

    No, Firefox is user choice rules over the "wants" of individual websites as far as disabling contextual menus and the keyboard commands.
    Placing a transparent image over the image will keep the less technical user from saving the main image. If they do try to save it all they'll get is the transparent image overlay.

  • How to create a new User / Contact using APIs

    I am not able to figure out how to create a new User / Contact in WLPS using APIs
    . Is there a factory class ?
    Thanks,
    AJ

    Hi Bala,
    Try using these function modules
    SUSR_BAPI_USER_CREATE
    BAPI_USER_CREATE
    BAPI_USER_CREATE1
    BAPI_USER_INTERNET_CREATE ( This internally calls BAPI_USER_CREATE1)
    Please read the FM documentation for more information.

  • How to create a new database and use it?

    Hi there,
    I have so many tables in the current database that i'm working on. When i start to create a new table such as employee, student, person...etc it doesnt allow me to create them becuase it says the tables exists. Even when i use the drop command to drop the tables, doesn't help. So most of the time i have to create a table with postfix of 1, 2 to the table name.
    Therefore i need to create a database for every project that i do.
    How do i create a new database?
    Then how do i use the database that i just created?
    Then how do i find the out whats the database that i'm currently working on?
    Thanks!
    Message was edited by:
    dingdong
    Message was edited by:
    dingdong

    A database is a physical set of files that contains many schemas. Each schema has a one to one relationship with database users, so to create a new schema you create a new database user.
    e.g.
    CREATE USER fred IDENTIFIED BY fredspassword;Then, by logging on as fred you can create all the new tables you like as that user, in that users schema.
    If you create a new database then you will find you cannot access functions/procedures, packages, tables etc. that exist in another users schema without creating a database link to the other database that contains them.
    If you just create a new schema, you can more easily get at other users schema objects (tables, packages etc.) by referencing them with the users name e.g. JOE.TABLE1 providing that user has given permission for your user to access them. You can also create synonyms that allow you to reference other users schema objects as if they exist in your own e.g. you can have something called TABLE1 in your own schema that is in fact referencing JOE.TABLE1.
    Message was edited by:
    BluShadow
    remove quotes from password. oops! thanks padders

  • How to create a message check boxes group dynamically in OA Framework

    Hi all,
    I am developing a custom OAF page. It is a master-detail page. And I am having some difficulties to build that.
    Firstly, I need to create a dynamic message check boxes group. These check boxes will get the prompt from a standard database table's column. Let's say I have table X with description column and it has 7 rows. Values of description column are A,B,C, ...etc. Then my master region on the page will have 7 check boxes with the prompts of A,B, C... Check box number will depend on the row/rows that this table has.
    The other requirement is to create master and detail rows that depends on the number of any checked check boxes. If 2 check boxes are checked then we need to create 2 rows of master data and detail data too.
    Does any of you have any ideas or suggestions to do that?
    It is urgent, any help would be appreciated.
    Thanks in advance and regards
    PS: Is it possible to do that? Can anyone put some light on this thread please?
    Edited by: user1742330 on Aug 12, 2012 4:23 PM

    Please help me out with this issue...
    I am in a very urgent situation. Any idea about this thread???

  • ALV GRID-how to select all the check boxes using push button

    Hai All,
    I displayed ALV grid & every record contains one check box as first column.
    If user clicks on one push button all the check boxes needs to selected.
    Could any one tell me how to do this?
    Regards,
    Bhaskar

    Hi Bhaskar,
       Try this code :
    *" Table declarations...................................................
    TABLES :
      spfli.                              " Flight Schedule
    *" Data declarations...................................................
    Work variables                                                      *
    DATA :
      w_checkbox  TYPE c,                  " Check Box
      w_checkbox1 TYPE c,                  " Check Box
      w_lineno    LIKE sy-lilli,           " Current Line No
      w_lines     TYPE i.                  " No. Of Records in Int.Table
    Internal table to hold Flight Schedule data                         *
    DATA :
       t_spfli LIKE
      STANDARD TABLE
            OF spfli.
    Structure to hold Function Codes                                    *
    DATA :
      fs_fcode LIKE LINE OF t_fcode.
                          TOP-OF-PAGE EVENT                             *
    TOP-OF-PAGE.
      PERFORM top_of_page.
                       START-OF-SELECTION EVENT                         *
    START-OF-SELECTION.
      PERFORM fetch_spfli_data.
      SET PF-STATUS 'YMENU1'.
      DESCRIBE TABLE t_spfli LINES w_lines.
      fs_fcode = 'EXIT'.
      APPEND fs_fcode TO t_fcode.
      fs_fcode = 'SELECT'.
      APPEND fs_fcode TO t_fcode.
      fs_fcode = 'DESELECT'.
      APPEND fs_fcode TO t_fcode.
      fs_fcode = 'RETRIEVE'.
      APPEND fs_fcode TO t_fcode.
                        AT USER-COMMAND EVENT                           *
    AT USER-COMMAND.
      PERFORM user_command.
    FORM top_of_page .
      WRITE :/50 'Flight Schedule Information'(008).
      ULINE.
      FORMAT COLOR 1.
      WRITE :/10 'Carrier ID'(001),
              25 'Connection ID'(002) ,
              43 'Airport From'(003),
              59 'Airport To'(004),
              74 'Departure Time'(007),
              93 'Arrival Time'(011),
             106 space.
    ENDFORM.                               " FORM TOP_OF_PAGE
    FORM fetch_spfli_data .
      SELECT carrid                        " Carrier ID
             connid                        " Connection ID
             airpfrom                      " Airport From
             airpto                        " Airport To
             deptime                       " Departure Time
             arrtime                       " Arrival Time
        FROM spfli
        INTO CORRESPONDING FIELDS OF
       TABLE t_spfli.
      IF sy-subrc EQ 0.
        PERFORM display_spfli_data.
      ENDIF.                               " IF SY-SUBRC EQ 0
    ENDFORM.                               " FORM FETCH_SPFLI_DATA
    FORM display_spfli_data .
      SORT t_spfli BY carrid ASCENDING.
      LOOP AT t_spfli INTO spfli.
        FORMAT COLOR 2.
        WRITE :/2 w_checkbox AS CHECKBOX,
                  spfli-carrid   UNDER text-001,
                  spfli-connid   UNDER text-002,
                  spfli-airpfrom UNDER text-003,
                  spfli-airpto   UNDER text-004,
                  spfli-deptime  UNDER text-007,
                  spfli-arrtime  UNDER text-011.
      ENDLOOP.                             " LOOP AT T_SPFLI...
    ENDFORM.                               " FORM DISPLAY_SPFLI_DATA
    FORM user_command .
      CASE sy-ucomm.
        WHEN 'SELECT'.
          w_checkbox1 = 'X'.
          DO w_lines TIMES.
            w_lineno = sy-index + 3.
            READ LINE w_lineno FIELD VALUE w_checkbox.
            IF w_checkbox = '*'.
              CONTINUE.
            ELSE.
              MODIFY LINE w_lineno FIELD VALUE w_checkbox FROM w_checkbox1.
            ENDIF.                         " IF W_CHECKBOX = '*'
          ENDDO.                           " DO W_LINES TIMES.
        WHEN 'DESELECT'.
          w_checkbox1 = ' '.
          DO w_lines TIMES.
            w_lineno = sy-index + 3.
            READ LINE w_lineno.
            IF w_checkbox = '*'.
              CONTINUE.
            ELSE.
              MODIFY LINE w_lineno FIELD VALUE w_checkbox FROM w_checkbox1.
            ENDIF.                         " IF W_CHECKBOX = '*'
          ENDDO.                           " DO W_LINES TIMES.
        WHEN 'RETRIEVE'.
          w_checkbox = ' '.
          DO w_lines TIMES.
            w_lineno = sy-index + 3.
            READ LINE w_lineno FIELD VALUE w_checkbox INTO w_checkbox.
            IF w_checkbox = 'X'.
              PERFORM fetch_sflight_data.
              PERFORM display_sflight_data.
            ENDIF.                         " IF W_CHECKBOX = 'X'
          ENDDO.                           " DO W_LINES TIMES.
      ENDCASE.                             " CASE SY-UCOMM
    ENDFORM.                               " FORM USER_COMMAND
    This report gives you the SPFLI Data and places a check box in front of each record. When u click on select all button it will select all the records. And if you click on deselect all it will deselect all the records. When you are trying this maintain the pf-status 'YMENU1' and give the function codes as in the code.
    Regards,
    Swapna.

  • Adding a new text field using forms personalization

    Hello all,
    In our seeded People Screen in HR, i need to add a field and assign a value based on the employee record to that field only for certain business groups.
    Can i achieve this using personalization? Also how to populate the value in the field which should also sync with the current record displayed in the existing form.
    Thank You
    KK

    Forms Personalization is a feature of the Oracle Enterprise Business Suite (EBS) not a feature of Oracle Forms. Please post your question in the General EBS Discussion forum. If you have a general Forms question, by all means, ask it here! ;-)
    Craig!

  • Crystal Reports XI - How  to create a new field using a formula field

    I'm quite new to CR, but have been learning quickly!
    I would like to know how to automatically create a new record/field based on another field in that row...
    I have a report showing the following data:
    Run Code     Start KM    Stop KM    Status 
    H2                 100            150           Partial
    H2                 150             155          Partial
    H2                 155             160          Partial
    S3                 120             150       Completed
    The status is generated by comparing the 'Start KM' and 'Stop KM' against fields in another table called 'Start Odo' and 'Stop Odo'
    In this example...
    H2 has 'Start Odo' and 'Stop Odo' values of 90 to 160, therefore there is still 90-100 to check.  The 'Start KM' and 'Stop KM'  is equal to the 'start Odo' and 'stop Odo' for S3, therefore it shows completed.
    My question is how do you create a formula field, which will add an entire row...displaying the values 90-100.
    I've been trying to use a conditional check in the 'Start KM' column, that sees if status is equal to partial than if start km is greater than start odo (Which is the reference km) then display the value of start odo in the new row. I'm stuck at how to create a new row.
    I want the final result to look like this...
    Run Code     Start KM    Stop KM    Status 
    H2                  90              100         Partial
    H2                 100             150          Partial
    H2                 150             155          Partial
    H2                 155             160          Partial
    S3                 120             150       Completed
    Any suggestions would be more than appreciated

    Hi Adi
    Looking at your examples it seems that you want to add a row to the existing recordset (rows fetched from the database).
    If it is the case (even if based on a formula) then you can not do it within crystal. Crystal is designed to display data and ideally it should not generate the new data.
    However, as per your requirement you can try to add this logic at database end. May be a command object within Crystal Reports can help you.
    Let me know if you do not understand anything.
    Regards
    Nikhil

  • How to create a new variant and a job sheduled to use it for the ......

    How to create a new variant and a job sheduled to use it for the exisisting programs

    Hi
    1. The ALV Grid Control is a tool with which you can output non-hierarchical lists in a
    standardized format. The list data is displayed as a table on the screen.
    The ALV Grid Control offers a range of interactive standard list functions that users need
    frequently (find, sort, filter, calculate totals and subtotals, print, print preview, send list,
    export list (in different formats), and so on. These functions are implemented in the
    proxy object class. You as the programmer have the possibility to turn off functions not
    needed. In most cases the implementations of the standard functions provided by the
    control are sufficient. However, if required, you can adjust these implementations to
    meet application-specific needs.
    You can add self-defined functions to the toolbar, if necessary.
    The ALV Grid Control allows users to adjust the layout of lists to meet their individual
    requirements (for example, they can swap columns, hide columns, set filters for the
    data to be displayed, calculate totals, and so on). The settings (list customizing) made
    by a specific user are called a display variant. Display variants can be saved on a userspecific
    or on a global basis. If such display variants exist for a list, they can be offered
    to the user for selection. If a display variant is set as the default variant, the associated
    list is always displayed based on the settings of this variant.
    2. REUSE_ALV_LIST_DISPLAY
    REUSE_ALV_GRID_DISPLAY
    REUSE_ALV_FIELDCATALOG_MERGE
    REUSE_ALV_COMMENTARY_WRITE
    3. Use of Field Catalog is to determines the technical properties & add formating information of the column.
    6. all the definition of internal table, structure, constants are declared in a type-pool called SLIS.
    7.fieldcat-fieldname
    fieldcat-ref_fieldname
    fieldcat-tabname
    fieldcat-seltext_m
    5. Form user_command using r_ucomm like sy-ucomm rs_selfield type slis_selfield.
    Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length.
    In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output.
    The report output can contain up to 90 columns in the display with the wide array of display options.
    <b>The commonly used ALV functions used for this purpose are;</b>
    1. REUSE_ALV_VARIANT_DEFAULT_GET
    2. REUSE_ALV_VARIANT_F4
    3. REUSE_ALV_VARIANT_EXISTENCE
    4. REUSE_ALV_EVENTS_GET
    5. REUSE_ALV_COMMENTARY_WRITE
    6. REUSE_ALV_FIELDCATALOG_MERGE
    7. REUSE_ALV_LIST_DISPLAY
    8. REUSE_ALV_GRID_DISPLAY
    9. REUSE_ALV_POPUP_TO_SELECT
    Purpose of the above Functions are differ not all the functions are required in all the ALV Report.
    But either no.7 or No.8 is there in the Program.
    <b>
    How you call this function in your report?</b>
    After completion of all the data fetching from the database and append this data into an Internal Table. say I_ITAB.
    Then use follwing function module.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
    I_CALLBACK_PROGRAM = 'Prog.name'
    I_STRUCTURE_NAME = 'I_ITAB'
    I_DEFAULT = 'X'
    I_SAVE = 'A'
    TABLES
    T_OUTTAB = I_ITAB.
    IF SY-SUBRC <> 0.
    WRITE: 'SY-SUBRC: ', SY-SUBRC .
    ENDIF.
    ENDFORM. " GET_FINAL_DATA
    The object F_IT_ALV has a field, the activity ACTVT, which can
    contain four permitted values: 01, 02, 03 and 70. Each of the
    activities 01, 02 and 70 controls the availability of particular
    functions (in the menu and the toolbar) of the ALV line item list:
    a) 01: "Settings -> Display variant -> Save..."
    b) 02: "Settings -> Display variant -> Current..." and
    "Settings -> Display variant -> Current header rows "
    c) 70: "Settings -> Display variant -> Administration..."
    Activity 03 corresponds to the minimum authorization, which is the
    most restricted one: The user can only select layouts which have
    been configured already. In particular, all of the other functions
    named above are inactive with activity 03.
    Now if you want to permit a user to change the column selection and
    the headers as well as to save the layout thus created, for example,
    but if you do not want to permit the user to administrate the
    layouts, you grant him or her the authorization for activities 01
    and 02.
    Check this link it will be mosty usefull for u
    http://www.sap-img.com/fu017.htm
    Reward all helpfull answers
    Regards
    Pavan

  • How can I create a new entry without using LOV for foreign keys.

    Referring to TUHRA sample application based on HR database schema. JDeveloper 10.1.3.0.4
    How can I create a new employee without using LOV for the foreign key "job_id".
    On the first page I would like to choose the job_title from adf read-only table.
    After clicking on the "create new employee button" a creation form appears in which the job_id field is set with previous selection.
    Regards M.Winkler
    Edited by: user3541283 on 06.10.2008 03:44
    Edited by: user3541283 on 06.10.2008 03:50

    Hi,
    usually the foreign key is only set if the VO you select is dependent from a master. If e.g. you have DepartmentsVO1 that has an EmployeeVO3 as its nested VO, then creating a new instance of employees automatically add the foreign key. If you add EmployeesVO1, which is not dependent to DepartmensVO1, then the foreign key is not set. So if this is the case in THURA (keep in mind that this is not an Oracle demo but a sample used in a book about ADF) then all you need is to take the independent VO when building the new employee form.
    Frank

  • How Can I Create a New Check In Page?

    Hello,
    I'm trying to create a new check in page using hcst or jsp but i can´t find the place to put it... or to customized it... and I don´t know where to find the files for it.
    Thanks,
    Rui Santos

    As was already mentioned there is the rules/profiles through configuration applet, but if you want to use a custom HCSF, HCST, JSP, etc., and then add it to the menu you will need a component that makes use of the navBuilder JavaScript API.
    Then you add a resource file to your component and add something like this to that resource:
              <@dynamichtml custom_finish_layout_init@>
                   <$include super.custom_finish_layout_init$>
                   navBuilder.addChildNodeTo
                        'ADMINISTRATION',
                        'item',
                        'id==FileStorePathFinder',
                        'label==File Store Path Finder',
                        'url==' + httpCgiPath +'?IdcService=FILE_STORE_TEST'
              <@end@>
    For this example, we are actually adding a menu item to the Administration menu, but all the menus can be manipulated like htis.

  • How can I create accurate decimal dimensions when creating a new document or using the art board in Illustrator CS6? When I type in a number with a decimal, it automatically rounds the number up.

    How can I create accurate decimal dimensions when creating a new document or using the art board in Illustrator CS6? When I type in a number with a decimal, it automatically rounds the number up.

    For my part you are welcome, sdowers.
    Unfortunately, the uncertainty arising from the rounding has been up several times here in this forum.
    I just came to remember a warning that needs to be given:
    The rounding of the representation of a numerical value may be harmless in itself, but if you use it for any operation that changes the value, such as multiplication or whatever, things will go wrong because the operation will be made on the basis of the rounded value instead of the true value. So, as in your first case in post #2, 39.625 rounded to 39.63 will become 79.26 instead of 79.25.

  • How to create a new folder in my email box

    how to create a new folder in my email box?

    Organizing Mail
    http://support.apple.com/kb/HT5361

  • How to create a new material using a BAPI?

    Dear friends,
    How to create a new material using a BAPI? I mean without knowing the material no., how to just create a new one using function modules(BAPI)?
    Thanks a lot!

    Dear,
    New material can be created by using a BAPI_MATERIAL_SAVEDATA.
    More over their are lots of threads available on SDN on the question you raised so kindly search the SDN before posting any thread .
    Cheers
    fareed

Maybe you are looking for