How to create a new Table

Hi,
I need to create a new Table from null,
is the example in the javadoc of com.sun.rave.web.ui.component.TableBase ok ?
If yes where are the Messages and Clean classes ?
Thanks.

Thanks, found : Creator Tip: Displaying two dimensional array in the table component

Similar Messages

How to create a new table based out of old data rows

Hi All,
How to create a new table based out of old data rows. Also how can we find out the DBF for different users in a database?
Saqib

Not very clear what you need. I'll try to interpret...
How to create a new table based out of old data rowsIf this means how to create a table from an existing one, then you can do :
SQL> create table <new table> as select * from <old table>;
if you need a subset of rows you can add a where clause.
how can we find out the DBF for different users in a database?Here I need some more clarification. What do you mean exactly ?

How to create / populate new table in MaxDB?

Dear All,
I'm a newbies in using MaxDB and still learning on it.
I've installed MaxDB Database Manager 7.6
I need help from all the experts here on the following "dumb" questions from me.
1) I can't create, modify or delete any table / data with Database Manager, am I right?
2) Should I start creating / populating tables with sqlcli or dbmcli? I was informed that I should use sqlcli instead or dbmcli.
3) What is the syntax for me to create new table, as well as add, modify and delete data within it?
Please assist to provide some guidance or at least point me to the right direction interm of documentation available.
THANK YOU VERY MUCH!!!
Much appreciated,
-Deric-

> I've installed MaxDB Database Manager 7.6
>
> I need help from all the experts here on the following "dumb" questions from me.
>
> 1) I can't create, modify or delete any table / data with Database Manager, am I right?
Nope - the Database Manager is not able to to "sql-stuff".
You would want to use the Database Studio or the SQL Studio for that.
But as you're starting to learn anyhow, just go for the more modern Database Studio.
It combines the features of Database Manager and SQL Studio into one tool.
> 2) Should I start creating / populating tables with sqlcli or dbmcli? I was informed that I should use sqlcli instead or dbmcli.
Why would you want to learn SQL by working with command line tools?
Really, go for the Database Studio instead.
For simple SQL stuff via command line you may use sqlcli.
> 3) What is the syntax for me to create new table, as well as add, modify and delete data within it?
> Please assist to provide some guidance or at least point me to the right direction interm of documentation available.
You definitively need
a) read the tutorial in the [documentation|http://maxdb.sap.com/doc/7_7/d0/3e345709c044d4a954e3a8d0be0867/content.htm]
and
b) get a SQL learning book to really understand the concepts behind relational databases and the query language.
Learning SQL is not about knowing how to type the commands.
Most users learn the commands rather quickly.
But fully understanding the set-approach of relational databases and how to create and use those databases correctly is often not learned.
So make sure not to fall into this trap!
regards,
Lars

How can I create a new table in a MySQL database in MVC 5

I have an MVC 5 app, which uses MySQL hosted in Azure as a data source. The point is that inside the database, I want to create a new table called "request". I have already activated migrations for my database in code. I also have the following
code in my app.
Request.cs: (inside Models folder)
public class Request
public int RequestID { get; set; }
[Required]
[Display(Name = "Request type")]
public string RequestType { get; set; }
Test.cshtml:
@model Workfly.Models.Request
ViewBag.Title = "Test";
<h2>@ViewBag.Title.</h2>
<h3>@ViewBag.Message</h3>
@using (Html.BeginForm("SaveAndShare", "Home", FormMethod.Post, new { enctype = "multipart/form-data" }))
@Html.AntiForgeryToken()
<h4>Create a new request.</h4>
<hr />
@Html.ValidationSummary("", new { @class = "text-danger" })
<div class="form-group">
@Html.LabelFor(m => m.RequestType, new { @class = "col-md-2 control-label" })
<div class="col-md-10">
@Html.TextBoxFor(m => m.RequestType, new { @class = "form-control", @id = "keywords-manual" })
</div>
</div>
<div class="form-group">
<div class="col-md-offset-2 col-md-10">
<input type="submit" class="btn btn-default" value="Submit!" />
</div>
</div>
@section Scripts {
@Scripts.Render("~/bundles/jqueryval")
HomeController.cs:
[HttpPost]
public ActionResult SaveAndShare(Request request)
if (ModelState.IsValid)
var req = new Request { RequestType = request.RequestType };
return RedirectToAction("Share");
The point is that, I want the user to fill the form inside the Test view and click submit, and when the submit is clicked, I want a new entry in the new table to be created. But first of course I need to create the table. Should I create it using SQL query
through MySQL workbench? If yes, then how can I connect the new table with my code? I guess I need some DB context but don't know how to do it. If someone can post some code example, I would be glad.
UPDATE:
I created a new class inside the Models folder and named it RequestContext.cs, and its contents can be found below:
public class RequestContext : DbContext
public DbSet<Request> Requests { get; set; }
Then, I did "Add-Migration Request", and "Update-Database" commands, but still nothing. Please also note that I have a MySqlInitializer class, which looks something like this:
public class MySqlInitializer : IDatabaseInitializer<ApplicationDbContext>
public void InitializeDatabase(ApplicationDbContext context)
if (!context.Database.Exists())
// if database did not exist before - create it
context.Database.Create();
else
// query to check if MigrationHistory table is present in the database
var migrationHistoryTableExists = ((IObjectContextAdapter)context).ObjectContext.ExecuteStoreQuery<int>(
string.Format(
"SELECT COUNT(*) FROM information_schema.tables WHERE table_schema = '{0}' AND table_name = '__MigrationHistory'",
// if MigrationHistory table is not there (which is the case first time we run) - create it
if (migrationHistoryTableExists.FirstOrDefault() == 0)
context.Database.Delete();
context.Database.Create();

Hello Toni,
Thanks for posting here.
Please refer the below mentioned links:
http://azure.microsoft.com/en-us/documentation/articles/web-sites-dotnet-deploy-aspnet-mvc-app-membership-oauth-sql-database/
http://social.msdn.microsoft.com/Forums/en-US/3a3584c4-f45f-4b00-b676-8d2e0f476026/tutorial-problem-deploy-a-secure-aspnet-mvc-5-app-with-membership-oauth-and-sql-database-to-a?forum=windowsazurewebsitespreview
I hope that helps.
Best Regards,
Sadiqh Ahmed

How can I create a new table from a filed cell?

Every time that I fill a row of cells I want to creat a new table with the content of that cells.
How can I do it?
Donw here it´s the example.
From the top table, I want to fill these rows, and everytime that it´s done, I want that a new table apears like the cells under.
There is any Way to do it?
In the Spanish version of Number I found in the references formulas, one formula called "DIRECTION" that describes to do this.
But I found no way to do it.
The above formula it´s this:
=DIRECCION(row; collumn; type of direction; stile of direction; table name)
Anyone can help me?
I really need this solution.

Otto,
Based on the syntax you quoted for that function, the english equivalent is "Address". It doesn't create a Table, but rather it creates an Address that references a Cell, in the form of a String. The common, and only, use that I am aware of for Address is to use it as the parameter for INDIRECT. For example: INDIRECT(ADDRESS)) will produce a reference to a table cell, but it will not produce a table.
Jerry

Hi guys n girls. How do you copy a whole table to create a new table with all cell sizes in tact? Thanks for your help. Jason.

Hi guys n girls. How do you copy a whole table to create a new table with all cell sizes in tact? Thanks for your help. Jason.
when you copy n paste into a new table, all the cell sizes are changed.
is there a way to put in a new table from your templates into an existing file, different to the standard very basic ones in insert table.
I look forward to your answers. Your help is very much appreciated.
Also how do you search for question answers already written in this support area please.

Hi Jason,
In Numbers 3, you can select a whole table by clicking once in the table to make it active, then click once on the "bull's eye" at the top left.
Now copy and paste. All formatting (and any cell content) is pasted intact. In Numbers 2.3 (Numbers '09) it is a little different for selecting a whole table. But I won't go into that unless you are using Numbers '09. Please reply.
I don't like the look of the tables in Insert Table. I keep custom tables in My Templates. I have set Numbers > Preferences > General > For New Documents > Use template: (name of my favourite custom template)
That opens when I launch Numbers, or ask for a new document (command n). Note that if you follow this preference setting, then Menu > File > New From Template Chooser (for another template) requires you to hold down the option key in that menu.
Regards,
Ian.
Message was edited by: Yellowbox. All formatting (and any cell content) is pasted intact.

How To Create the New Advance Table in standered RN?

Hi Gurus,
How to create the New Advance Table in stander RN?
My requirement is slandered RN Having 1 Advance Table that advance table retrieve the two types of data 1.FUNC 2.BEHV Now My Client is asking split the data
1) FUNC Data
2) BEHV Data.
Now i did first one through Vo Extension Filter the FUNC Data. now i really struck the Another part plz help me i cont go the next step....pl z tell me what are prerequisites are needed and how to go next step plz help me Gurus.
Regards,
Srini

Hi,
I have adding new & existing forms and creating User Defined Field in row. example on adding a field in an existing Form and its corresponding to the database, including user input validations?
I want to add a new field in the detail section ( row area ) of a Production Document, and save it to database and read it back when the document is opened.
Thanks.
Syed Waqar Khurshid

How to Create the new Field ( Table - Row) in SAP B1

I have a scenario in which the Purchase calculation is based on LR, so for that we have to add new field in Purchase Document. that filed is not available in form setting. kindly let me know how to Create a new field in Purchase document.
Thanks

Hi,
I have adding new & existing forms and creating User Defined Field in row. example on adding a field in an existing Form and its corresponding to the database, including user input validations?
I want to add a new field in the detail section ( row area ) of a Production Document, and save it to database and read it back when the document is opened.
Thanks.
Syed Waqar Khurshid

How to create the custom table?

Hi, how to create the custom table and how to integrate the table with defferent R/3?
my requiremnt is i have to create the two tables and those i have to integrate with the existed R/3 and using those R/3 i have to update my custom tables .....can give me some idea?
Tks
DPk

how to create the custom table
There are two approach in creating a table.
1. Bottom-up approach
2. Top-down approach.
Both are valid and you can choose which approach is suitable for you. I always use the bottom-up approach. Here are the steps to create the tables with this approach.
1. SE11 will take you to the DDIC and enter the name of the new table to be created. Let us say Zname. Click create.
2. Enter the short discription of the table and enter the field of the table. If it is primary key and you have to check the box.
3. Enter the data element and double click it, you will be asked to save and will take you to data element discription page. Enter the short discription of the data element and enter the information of domain like the length of field and type of field.
4. If you wanted to use the existing domain then its fine, or else, you have to create one. Enter the domain name in the data element page and double click it. Page will ask to save and jump to domain creation page.
5. In the domain page, you have to save the information which you have already given in the data elements page and check it. Before going to data element page, you have to activate the domain.
6. Go to data element page and save, check and activate.
7. Go to main table page and save, check, and activate.
8. Also, you have to save the technical settings of the table.
The table is now ready for operation. You can use it in your program or you can use it to enter information.
Check table: It is the table which will have all the information about the Foreign keys which are the primary keys in the check table.
It can be created by creating the foreign key from the main table. Click foreign key in the main table and it will take you to a page which will ask for table name and field to which foreign key relation has to be associated. Enter the information and you can create the check table automatically.
SM30 is used for maintenance of the table, that is to realease the errors occured during the creation of the table.
how to integrate the table with defferent R/3
Transport the Table to the another server/client/qas/prd
Kanagaraja L

How to create a new tab in CRMD_ORDER for custom fields

Hi Expert,
I have added custom fields in crmd_customer_ i through EEWB .
Now i want to display the fields in a new tab in CRMD_ORDER.
can you please guide me how to create a new Tab step by step procedure.
Thanks & Regards,
Avi

Dear Avi,
please be aware that crmd_order is no longer supported since crm2007 (6.00). That means EEWB is not the right tool to add customer fields because only WEBUI is supported. There you can use the AET tool to create own fields or tables via configuration.
However please see note 1037748 where you get more information and help.
Best regards
Rene

How to create variant for table/view ?

Hi,
When I go through SM30, I find a radio button called variant. I don't know the effect.
Can anyone tell me how to create variant for table / view ?
I want to know when we need to create variant for table/view.
Best regards,
Chris Gu

hi ,
Whenever you start a program in which selection screens are defined, the system displays a set of input fields for database-specific and program-specific selections. To select a certain set of data, you enter an appropriate range of values.
For further information about selection screens, refer to Selection Screens in the ABAP User's Guide.
If you often run the same program with the same set of selections (for example, to create a monthly statistical report), you can save the values in a selection set called a variant
Procedure
To create a new variant:
       1.      On the ABAP Editor initial screen, enter the name of the program for which you want to create a variant, select Variants, and choose Change.
       2.      On the variant maintenance initial screen, enter the name of the variant to be created.
Note the naming convention for variants (see below).
       3.      Choose Create.
If the program has more than one selection screen, a dialog box for screen assignment appears. The dialog box does not appear if the program only has one selection screen. The selection screen appears in this case.
       4.      If there is more than one selection screen, select the screens for which you want to create the variant
5.      Choose Continue.
The (first) selection screen for the report appears.
If your program has more than one selection screen, use the scroll buttons in the left-hand corner of the application toolbar to navigate between them and to fill the fields with values. If you keep scrolling forwards, the Continue button appears on the last selection screen.
       6.      Enter the desired selection values, including multiple selection and dynamic selection.
       7.      Choose Continue.

Crystal Reports XI - How to create a new field using a formula field

I'm quite new to CR, but have been learning quickly!
I would like to know how to automatically create a new record/field based on another field in that row...
I have a report showing the following data:
Run Code     Start KM    Stop KM    Status
H2                 100            150           Partial
H2                 150             155          Partial
H2                 155             160          Partial
S3                 120             150       Completed
The status is generated by comparing the 'Start KM' and 'Stop KM' against fields in another table called 'Start Odo' and 'Stop Odo'
In this example...
H2 has 'Start Odo' and 'Stop Odo' values of 90 to 160, therefore there is still 90-100 to check. The 'Start KM' and 'Stop KM' is equal to the 'start Odo' and 'stop Odo' for S3, therefore it shows completed.
My question is how do you create a formula field, which will add an entire row...displaying the values 90-100.
I've been trying to use a conditional check in the 'Start KM' column, that sees if status is equal to partial than if start km is greater than start odo (Which is the reference km) then display the value of start odo in the new row. I'm stuck at how to create a new row.
I want the final result to look like this...
Run Code     Start KM    Stop KM    Status
H2                  90              100         Partial
H2                 100             150          Partial
H2                 150             155          Partial
H2                 155             160          Partial
S3                 120             150       Completed
Any suggestions would be more than appreciated

Hi Adi
Looking at your examples it seems that you want to add a row to the existing recordset (rows fetched from the database).
If it is the case (even if based on a formula) then you can not do it within crystal. Crystal is designed to display data and ideally it should not generate the new data.
However, as per your requirement you can try to add this logic at database end. May be a command object within Crystal Reports can help you.
Let me know if you do not understand anything.
Regards
Nikhil

HOW TO create a temp table or a record group at run time

i have a a tabular form and i dont want to allow the user entering duplicate
records while he is in insert mode and the inserted records are new and not exsisting in the database.
so i want to know how to create a temp table or a record group at run time to hold the inserted valuse and compare if they are exsiting in previous rows or no.
please help!

As was stated above, there are better ways to do it. But if you still wish to create a temporary block to hold the inserted records, then you can do this:
Create a non-database block with items that have the same data types as the database table. When the user creates a new record, insert the record in the non-database block. Then, before the commit, compare the records in the non-database block with those in the database block, one at a time, item by item. If the record is not a duplicate, copy the record to the database block. Commit the records, and delete the records in the non-database block.

How to create a new row for a VO based on values from another VO?

Hi, experts.
in jdev 11.1.2.3,
How to create a new row for VO1 based on values from another VO2 in the same page?
and in my use case it's preferable to do this from the UI rather than from business logic layer(EO).
Also I have read Frank Nimphius' following blog,but in his example the source VO and the destination VO are the same.
How-to declaratively create new table rows based on existing row content (20-NOV-2008)
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/13-create-with-params-169140.pdf
I have tried:
1.VO1(id,amount,remark1) and VO2(id,amount,remark2) are based on different EO,but render in same page,
2.Drag and drop a Createwithparams button for VO1(id,amount,remark),
3.add: Create insertinside Createwithparams->Nameddata(amount),
4.set NDName:amount, NDValue:#{bindings.VO2.children.Amount}, NDtype:oracle.jbo.domain.Number.
On running,when press button Createwithparams, cannot create a new row for VO1, and get error msg:
<Utils> <buildFacesMessage> ADF: Adding the following JSF error message: For input string: "Amount"
java.lang.NumberFormatException: For input string: "Amount"
at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
Can anyone give some suggestions?
Thanks in advance.
bao
Edited by: user6715237 on 2013-4-19 下午9:29

Hi,CM,
I'm really very appreciated for your quick reply! You know, today is Saturday, it's not a day for everyone at work.
My principal requirement is as follows:
1.select/check some rows from VO2, and for each selection create a new row with some attributes from VO2 as default values for VO1's corresponding attributes, and during this process the user may be cancel/uncheck or redo some of the selections.
--so it's better to implement it in UI rather than in EO.
2.it's better to implement this function with declarative way as in Frank Nimphius' blog.
--little Jave/JS coding, the better. I only have experience in ORACLE FORMS, little experience in JAVA/JS.
In order to get full information for the requirements of my use case, can take a check at:
How to set default value for a VO query bind variable in a jspx page?
(the end half of the thread: I have a more realworld requirement similar to the above requirement is:
Manage bank transactions for clients. and give invoices to clients according to their transaction records. One invoice can contain one or many transactions records. and one transaction records can be split into many invoices.
Regards
bao
Edited by: user6715237 on 2013-4-19 下午11:18
JAVE->JAVA

New field catalog VOLEH does not display while creating a new table

Dear Gurus,
I added new field as VOLEH in field catalog. However while I am creating a new table, new field (VOLEH) does not showed in field catalog...
How can I fix this error?
Kind Regards,

HI
Check once again in IMG>SD>Basic func>Pricing >Pricing control>define condition table>conditions : allowed fields> go to new entries then press F4
check here newly created field is there or not
(or) when creation of condition table check properly next page button in menu bar
still if its not found
Note 21040 - Allowed Fields not appearing for condition table
or check this link
http://www.sap-basis-abap.com/sd/how-to-add-new-fields-to-field-catalog.htm
Regards,
Krishna.

How to create a new Table

Similar Messages

Maybe you are looking for