How to create an additive dissolve

How do I create an additive dissolve in After Effects ?
I found this link, but I'm not convinced of the result or I may be doing it wrong...!?
http://forums.creativecow.net/archivepost/2/450224
Thank you.

Using BLEND in 32 bpc gives me the yeallow ! triangle with the notice that this effect only supports 8 and 16 bpc and might cause color degradationby diminuishing color precision and remove any high dynamic range value if used in 32 bpc.
Do I you it any way or can 16 bpc do same thing for additive dissolve effect ?
I'm using CINEFORM PropectHD if that impacts anything, the actual footage is CFAVI AspectHD 8 bit low.

Similar Messages

How to Create an additional customization RX Report

As the subject. I want to create a report with "Where Clause API" in based on the standard report. Since the standard report does not allow me to input into, it is disabled. As there has Tool/New Report menu in the "Report eXchange Designer" responsibility. So I am thinking, Oracle may have some features to let us do the customization. But I could not pick the report which I created in the "System Administrator" responsibility.
Does someone have that experience or have some documents on how to create a customization Rx report.
Thanks in advance
Sean

You can add up to three 'email aliases' - these are additional addresses (not accounts) which deliver into the same inbox as the main account. (In fact it's a good idea to give out alias addresses, rather than the main address, because if they attract spam you can easily change them.)
You should be aware before you start that once you've created an alias you cannot turn that address into a full iCloud account or move it to another account.
More information on aliases here: http://help.apple.com/icloud/#mm6b1a490a

How to create the additional field on Maintenace order

Hi,
For adding additional field on order -
I am aware about the facility in SAP, in which we can create the view profile, which contains the various tab pages and the sub tab pages(Which are subscreens). When we assign this view profile the order type then we can view the various fields selected in the view profile in the order screen in IW31 T code.
Now if i want to add some additional field then i can create the additional screen using the user exit and then assign it in customisation to the view profile and then to the order type.
But is it possible to add the field by using any other way?
If yes, request to let me know in detail alongwith the user exist if any.
Thanks

Hi all,
Thanks for the quick reply. As per as the field key is concerned, i dont want to use that.
I can add field by designing the new screen and adding it in the view profile but the main problem is that whenever i add the view profile to the order type, the standard tab pages are not appearing as a default and i have to add the screens as per the standard (to the view profile).
Pete
About IWO10018 -
I have gone through the documention of the user exit it says that to add the additional fields on the order header, one has to append the structure CI_AUFK with the custom fields/additional fields and then use the function EXIT_SAPLCOIH_018 and 19 to transfer the data to and from the screen area to the SAP but the one point i am not sure about is how the custom fields updated in the structure will get displayed on the main screen(to input the value into them into screen) .
Thanks
Edited by: Raghunandan Iyer on Jul 29, 2008 2:11 AM

How to create an additional email adress

I would need an extra email account , can I create that with my existing apple account?

You can add up to three 'email aliases' - these are additional addresses (not accounts) which deliver into the same inbox as the main account. (In fact it's a good idea to give out alias addresses, rather than the main address, because if they attract spam you can easily change them.)
You should be aware before you start that once you've created an alias you cannot turn that address into a full iCloud account or move it to another account.
More information on aliases here: http://help.apple.com/icloud/#mm6b1a490a

How to create new additional independent non-duplicate desktop easy to switch ?

Hi, I want to make second desktop that will work like mission control, but will be non-duplcate and independent, that I could easly create new folders and make icons on it, without disturbing my first desktop.
Please don't tell me that is "impossible", unless You are progrmammer
Best regards.

1. Invoke Mission Control
2. Move the mouse pointer to the right of the small Desktop proxy at the top of the screen
3. You should see half a partially dimmed out second copy of the proxy appear at the right edge of the screen
4. Drag that to the left, next to the Desktop proxy Click on that dimmed out proxy icon
5. Exit Mission Control by clicking on any of the proxies or the main window
Message was edited by: R C-R

How to create non additive key figures

I don't want to add unit price in my transactional data that is loaded in my infocube. I automatically adds the unit price how to previent this in modelling the key figures.
Thank you.
Joe

This cannot be prevented. Key Figures will get added up.
One way around it is to store the quantity and the value associated with it and calculate the price at run time.
Other option is to store the price as a characterstic. If you need to use it in the queries, then use a formula variable with processing as replacement path.

How to create additional Line in file based on condition available as part of ZINVOIC02 Idoc segment

Scenario Details:
Receiving Zinvoic02 Idoc in PI. Idoc to file translation creates comma separated file with .csv extn
The logic was kept in such a way that how many E1EDP01 (items) are available in IDoc that many no of records will be created in csv file.
The file logic for some the fields is as below:
No of records
InvNumber
InvDate
CusNumber
LineitemDesc
Tax1Type
Tax1%
for 1st E1EDP01
E1EDK01-BELNR
E1EDK03-DATUM
E1EDK01-PARTN
Populate when E1EDP04/MSKWZ=O2 or O4 with E1EDP19/KTEXT
Hardcode when E1EDP04/MSKWZ=O2 or O4
Sum all E1EDP04 /MSATZ when E1EDP04/MSKWZ=O2 or O4
for 2nd E1EDP01
E1EDK01-BELNR
E1EDK01-DATUM
E1EDK01-PARTN
same as above
same as above
same as above
for 3rd E1EDP01
E1EDK01-BELNR
E1EDK03-DATUM
E1EDK01-PARTN
same as above
same as above
same as above
Additional Line to be created when one or more of E1EDP01 is having E1EDP04/MSKWZ = O3
same as above
same as above
same as above
Hardcode "REIM for USE TAX"
Hardcode ""
Hardcode ""
Now we have got addition requirement to add a new lineitem when tax code is equal to O3 for any of the E1EDP01.
Is it possible to create additional lineitem based on condition. If yes, please share what should be the approach.
How we can create the additional lineitem?
Currently we are using E1EDP01 to do context handling.
The target structure is :
MT_FILE
     INVOICE     0..unbounded
          InvNumber     0..1
          InvDate          0..1
          CusNumber     0..1
          LineitemDesc     0..1
          Tax1Type          0..1
          Tax1%               0..1

Hello,
Please add one extra field in the data structure of the target mapping and let its occurrence be 0..unbounded under the root node 'MT_ADP_Invoice'.
Apply the condition, if tax code MSKWZ (with its context changed to E1EDP01) equalsS to '03', then map it to the newly created target field whose occurrence is 0..unbounded.
This will then create an additional field which is your requirement.
The above is one way.
But if you want to have the same target field name as ADP_File appended for tax field being '03'.
Then in that case you can you two message mapping for one common operational mapping / interface.
In the first message mapping you need to have one target data structure created with the source data structure remaining the same as the one shown by you in scrn shot. Now this target data structure will be similar to the source, except that you need to add one more field at the end(name different from other fields) in target (whose occurrence should be 0..unbounded), and it needs to be mapped to E1EDP01 provided the tax code field MSKWZ(its context changed to E1EDP01) equalsS to constant '03'.
In the second message mapping you need to map the target structure of previous message mapping to the actual required structure. The newly added field should be mapped to ADP_File of your final target structure.
This will then create the same structure as required.
Note : Please change the occurence of ADP_File to 0..unbounded.
Regards,
Souvik

How to create code for an additional field in an info set

Hello,
I have an info set in tra SQ02 and the area is HCM with version ERP2004.
I need to create an additional field to show "Work permit" in ad hoc queries. I know that the infotype 0016 has a standard field P0016-ARBER which contains a date if that person has a work permit. System should select the latest record or the one which is valid during reporting period.
The requirement for this new field is that it should just has X if the field P0016-ARBER contains a date (i.e. that person has a work permit). If the field P0016-ARBER is empty, then the new field "Work permit" is also empty. So, the date itself is not enough.
I am not an abaper. I have tried to create a code for my field but there is always problems with the code. I have tried without the line<i>into</i> but checker says I need to. I have tried different places for statement ENDSELECT but without success. How should I do this?
What I have so far is (TYOLUPA = Work permit) is shown below:
select SINGLE ARBER
into TYOLUPA
from PA0016
where pernr = P0016-pernr
and ENDDA = '31129999'.
clear TYOLUPA.
if ARBER ne ''.
then TYOLUPA = 'X'.
endif.
Thanks for your advice!
Regards,
Pipsa

pia,
In extras tab create column "workpermit" in infoset and add that column to Field groups.
Then under record processing event...
DATA : TYOLUPA like PA0016-ARBER.
Under Record processing event.
select SINGLE ARBER
into TYOLUPA
from PA0016
where pernr = P0016-pernr
and ENDDA = '31129999'.
if TYOLUPA ne ' '.
WORKPERMIT = 'X'.
endif.
Don't forget to reward if useful...

How can i create a additional navigation bar

Hi,
i'm searching for a solution to create a additional navigation bar for my website. I created the site in German. Now i have to add the website in the English version. The problem is now, that the navigation bar will not check, that i will have a seperated version of the site in English.
Anybody there to help me out?

What you need to do is create the English and German sites as totally new sites so you have one site named English and one named German and you won't need to create any new navigation menus. Just link the sites together.
If you really want to create a new nav menu, then turn off the page template nav menu by opening the Inspector and going to Page, then check the boxed 'hide nav menu' and 'don't include in nav menu' and create your own text based nav menu by using either shapes of text boxes and then creating Hyperlinks between the pages.

How to create a quarterly view in SharePoint 2013

How do you create a 3 month view in SharePoint 2013, preferably without adding code?

Hi
you can create two additional calculated column to do.
http://blog.pentalogic.net/2009/11/howto-filter-items-current-calendar-month-view-sharepoint/
http://iwillsharemypoint.blogspot.in/2012/03/sharepoint-list-view-of-current-month.html
Rajendra Singh
Walking on water and developing software from a specification are easy if both are frozen
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

How to create a report of users in ucm about their roles and permission

Hi All ,
I need to create a report and it should contain all the users in ucm as well as their roles and permissions. Basically the report would be for the admin who can see all the users in a single report and can know about the roles and access of each and every users.
How to create such report ?? I have tried from web layuot editor but the default report template i.e stdUserReport in user datasource does not contain more than three fields..Is there any method to get such kind of report???
Please suggest!!

There was an example component to demonstrate this kind of function. Under Stellent in version 7.5
I do not know if they hand it out anymore but it is not on the standard samples page for Oracle. You may want to open a Support SR to ask for it. It should still be around in their servers if they can get permission to hand it out as a sample again.
Sample CustomReports component to demonstrate how to create customized reports
CustomReportsBundle.zip
Date:     October 30, 2006
Sample Version:     version=2006_10_20 (build 1)
Product and Version:     Content Server
Sample Status:     This is a Stellent Sample. Stellent Samples are free and include non-supported add-ons, utilities, tutorials or programming examples. It may require additional configuration or security auditing for maximum effect. It is not supported by Stellent without a consulting engagement.

How to create excise invoice without material document

Hi,
I want to create excise invoice for a subsequent credit note. I am agreed to give additional amount to my supplier for which i have not paid to him, now when i issue a subsequent credit note, how to create a excise invoice and do the excise entries without a material document.
Please suggest a solution
Regards,
Ashish

Go to T Code J1IH.
Select Additional Excise. Replace the document number by the vendors excise invoice. Enter the excise duties in lower box and click on Determine GL accounts button to simulate and then post.

How to create list items with multiple attachment files using rest api javascript

In one of user form I am using javascript rest api to create a list item with multiple attachment files. So far I am able to create list item and once created uploading an attachment file. But this is two step process first create an item and then upload
a file.
It create an additional version of the item which is not desired. Also I am not able find a way to attach multiple files in a go. Following is the code I am using.
createitem.executeAsync({
url: "/_api/web/lists/GetByTitle('UserForm')/items(1)/AttachmentFiles/add(FileName='" + aFile.name + "')",
method: "POST",
contentType: "application/json;odata=verbose",
headers: {
"Accept": "application/json;odata=verbose",
"X-RequestDigest": $("#__REQUESTDIGEST").val()
binaryStringRequestBody: true,
body: fileContent,
success: fnsuccess,
error: fnerror
So somehow I need to combine item attributes along with attachment files in body: param. I visited https://msdn.microsoft.com/en-us/library/office/dn531433.aspx#bk_ListItem but no success.
Appreciate any help.

Thanks Mahesh for the reply and post you share it was useful.
But this does not solve the core of the issue. You are uploading attachments after creation of item and multiple files are being attached in loop. This is kind of iterative update to an existing item with attachments. This will end up creating multiple versions.
What I am trying to achieve is to create an item along with multiple attachments in a go. No item updates further to attach a file.
Please suggest how this can be done in one go. SharePoint does it when one creates an item with multiple attachment.
Thanks for your reply.

How to create a user account by mirroring another account in PowerShell (Trying to learn to use Powshell for some daily AD tasks intead of the GUI)

Hi,
I am trying to create user accounts via PowerShell instead of the Gui in server 2008 R2 (PowerShell 2.0).
I know how to create a user account with the following Power Shell command below is one from a dummy domain I created to practice.
PS C:\Users\Administrator> New-ADUser -SamAccountName "TestOut" -UserPrincipalNa
me "[email protected]" -GivenName "Test" -Surname "out" -DisplayName "Testou
t" -Name "Testout" -Enabled $true -Path "CN=users,DC=bwcat,DC=net,DC=int" -Accou
ntPassword (Read-Host -AsSecureString "Enter Account Password")
However when doing day to day tasks where I work normally we have a new hire, they contact IT and ask that a user account is created. I will ask who they would like to mirror.
I then would go into the gui pull up the user that they want to mirror right click him and choose copy. This would create a new user account that I would then fill out.
I am wondering if its possible to do this same thing via PowerShell, or if its not an option because it takes more work type up everything than it does to go into the gui and do it.
Anyway thanks for the help.

Hi Wilder, hi Mark,
first of all: The tutorial sources Mark posted - especially the book "Powershell 3 in A month of lunches" - are good to get a baseline start. A really great reference, especially when you try to learn it while still dealing with your daily business.
On another note, Wilder: While I fully agree that learning things sequentially is usually the best, I too jumped right in instead of learning how to walk first (though it's been some time now. Fewer years than you'd think, but still ...). So I thought I'd
give you a little aid with that function husk, so you could just stuff interesting bits into an available structure, making use of the fun tools in a useful context (It's fun fiddling around with the commands, but if you have to type in all of them manually
each time, using the GUI is often just faster. Doing fun things and being efficient with it feels even better though ...). So ... while I
do agree with yourself, learn it the Correct & Proper Way, I also do
intend to finish this little explanation about the husk, all the way to the end.
Everything below this paragraph is part of this.
function Copy-ADUser
<#
.SYNOPSIS
A brief description of the Copy-ADUser function.
.DESCRIPTION
A detailed description of the Copy-ADUser function.
.PARAMETER GivenName
A description of the GivenName parameter.
.PARAMETER Surname
A description of the Surname parameter.
.PARAMETER Template
A description of the Template parameter.
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
.NOTES
Additional information about the function.
#>
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[Parameter(Mandatory = $true)]
[string]
$Template
) # Create finished Strings
$JoinedName = $GivenName + "." + $Surname
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName $JoinedName -Name "$Surename, $GivenName" -PassThru
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
This is again the same function husk I posted earlier. Only this time, I filled a little logic (the pieces that were already posted in this thread). This time, I'll not only go over each part again ... I'll do it by reposting the segments and trying to show
some examples on how to modify the parts. Thus some of it will be repetitive, but this way all the info is in one spot.
Segment: Comment Based Help
<#
.SYNOPSIS
A brief description of the Copy-ADUser function.
.DESCRIPTION
A detailed description of the Copy-ADUser function.
.PARAMETER GivenName
A description of the GivenName parameter.
.PARAMETER Surname
A description of the Surname parameter.
.PARAMETER Template
A description of the Template parameter.
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
.NOTES
Additional information about the function.
#>
That's the premier documentation part of a function, that teaches a user what the function does and how to use it. It's what's shown when using the Get-Help cmdlet.
Comment texts are not restricted to single lines however. For example you could replace ...
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
... with ...
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
Creates a new user named Max Mustermann and copies the group memberships of the already existing user Jonny Normal to this new User
... and get an explanation on what the example does when using Get-Help with the
-Detailed parameter (Explaining examples is always a good idea).
Segment: Parameter
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[Parameter(Mandatory = $true)]
[string]
$Template
This is the segment that tells Powershell what input your function accepts. Each parameter of Copy-ADUser you set will be available in the next segment as a variable of the same name. You can add additional parameters if you need more information for your
logic. For example, let's add a parameter that allows you to specify what Organization the new user should belong to:
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[string]
$Organization,
[Parameter(Mandatory = $true)]
[string]
$Template
That's how that would look like. You may notice that I didn't add the line with
"[Parameter(Mandatory = $true)] this time. This means you
may add the Organization parameter when calling Copy-ADUser, but you need not.
Segment: Logic
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
This is the part of the function that does the actual work. Compared to the first husk I posted, this time there are two commands in it (and some comments). First, I create a new user, using the information passed into
the parameters -Surname and -GivenName. Then I Copy the group memberships of the user identified by the information given by the
-Template parameter.
So, let's modify it!
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Tell the user you are copying Group Memberships
Write-Host "Copying the group-memberhips of $Template to $GivenName $Surname"
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
Now after adding a few lines, the logic will tell us what it's doing (and do so before it
is taking action)!
Hm ... didn't we create a change in the Parameter Segment to add an -Organization parameter? Let's use it!
# If the -Organization parameter was set, the $Organization variable will be longer than 0. Thus do ...
if ($Organization.Length -gt 0)
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname in the Organization $Organization"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -Organization $Organization -PassThru
# If the -Organization parameter was NOT set, the $Organization variable will have a length of 0. Thus the if-condition does not apply, thus we do the else block
else
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Tell the user you are copying Group Memberships
Write-Host "Copying the group-memberhips of $Template to $GivenName $Surname"
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
There! Now we first check whether the -Organization parameter was set (it's not mandatory after all, so you can skip it). If it
was set, do whatever is in the curly braces after if (...). However, if it wasn't set, do whatever is in the curly braces after
else.
And that concludes my "minor" (and hopefully helpful) tutorial on how to use the function husk I posted :)
With this, whenever you find another cool command that helps you in the user creation process, you can simply add it, similar to what I did in these examples.
And if it all didn't make much sense, go through the tutorials in proper order and come back - it'll make much more sense then.
Cheers and good luck with PowerShell,
Fred
There's no place like 127.0.0.1

How to create a variance on data that exists iIn only one database column

How to create a variance on data that exists iIn only one database column?
I'm trying to create a calculation to show the difference between the budgets for two different years in a Discoverer crosstab query.
I'm using the lag function to repeat the value of a column for the current year and the year before.

Lag and lead seems to be the only choice and they work excellent. Checkout the new 10g Database features. There is new SQL modal clause which might give additional and powerful analytics but in this case lag and lead should be sufficient.
regards
http://www.infocaptor.com/workbook-dump.php

How to create an additive dissolve

Similar Messages

Maybe you are looking for