How to create an exponential measure in RPD?
Dear Experts,
I'm using OBIEE 10.1.3.4.1 version.
I have a requirement to create the following logical measure in Administration Tool (RPD).
M = exp( a + bt), where a = Constant, b=Constant and t=Calendar Time , exp=exponential.
Kindly let me know is it possible to create this kind of measure in BMML in RPD.
Incase if it is possible, kindly me know how to create it.
Thanks in advance,
Regards,
Dev.
Edited by: user8783844 on Mar 8, 2010 7:21 PM
Hi Pansa,
Thanks for your suggestion.
In the given Formula, *M= Exp(a+bT), 'T' is a Time Function, and 'a' , 'b' are constants.*
By using exponential formula in the Expression Builder, can i use the TIME series(in our case b*T, where 'T' is Time Function) function to get the desire result.
Kindly let me know.
Thanks and Regards,
Dev.
Similar Messages
-
How to create a custom measure for each level of a dimension
Hi all!
Can Anyone please explain me with an example, how to create a custom measure for each level for a dimension? I dont mine if you use
one or more measures.
thanks in advance
hope someone helps me.For example:I create a dimension for product_dim witch has 4 levels:total, class, family and item:
d_aben18
n1_aben18
n2_aben18
n3_aben18
n4_aben18
herarchy:h_aben18
cube:cubo_aben18
measure:med_aben18
I create this code to fetch the data to the dimension:
TRAP ON CLEANUP
SQL DECLARE c1 CURSOR FOR SELECT-
total_product_id,1,'N1_ABEN18',total_product_dsc,-
class_id,1,'N2_ABEN18',total_product_id,class_dsc,-
family_id,1,'N3_ABEN18', class_id, family_dsc,-
item_id,1,'N4_ABEN18',family_id,item_dsc-
FROM PRODUCT_DIM
"OPEN THE CURSOR
SQL OPEN c1
"FETCH THE DATA
SQL FETCH c1 LOOP INTO-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N1_aben18_LEVELDEF,:D_ABEN18_long_description,-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N2_aben18_LEVELDEF,:D_ABEN18_parentrel,-
:D_ABEN18_long_description,-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N3_aben18_LEVELDEF,:D_ABEN18_parentrel,-
:D_ABEN18_long_description,-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N4_aben18_LEVELDEF,:D_ABEN18_parentrel,-
:D_ABEN18_long_description,-
"SAVE THE CHANGES
UPDATE
COMMIT
CLEANUP:
SQL CLOSE c1
SHOW 'KK2'
Then I create a cube with use compression off, and in rules sum for example.
After, I create a measure and I select Override the aggregation specification for the cube, in rules I put nonadditive and I would like to create aprogram to assign distinct values to each level of the dimension. For example, I put 1, 2 3, and 4 values, but at the end I would like to put count(distinct(values)).
for that I create another program:
VRB D_RETURN DECIMAL
if D_ABEN18_N1_ABEN18_LEVELDEF eq 'N1_ABEN18'
then D_RETURN = 1
if D_ABEN18_N2_ABEN18_LEVELDEF eq 'N2_ABEN18'
then D_RETURN = 2
if D_ABEN18_N3_ABEN18_LEVELDEF eq 'N3_ABEN18'
then D_RETURN = 3
if D_ABEN18_N4_ABEN18_LEVELDEF eq 'N4_ABEN18'
then D_RETURN = 4
else d_return=26
return d_return
"SHOW D_RETURN
cubo_aben18_med_aben18_stored=d_return
but it doesnt work.I dont know how to put to assign or to see what I want.
I report the measure, or I report the program, but then how can I see the values of the measure?
thanks in advance -
How to create cube and measure in sql?
How to create cube and measure in sql?
Cubes, measures and dimensions are created in the AW using the Java API for Analytic Workspaces or through XML documents that are processed by this API. SQL commands are not available for creating cubes, measures or OLAP dimensions.
-
HOW TO CREATE UNIT OF MEASURMENT IN SAP
HI ALL,
PLEASE HELP HOW TO CREATE UNIT OF MEASURMENT IN SAP NM/S
GIVE ME THE SCREEN SHOT OR STEPS IMM.
THANKS
HAPPYHI,
please check the below link for creation of UOM.
http://sap.ittoolbox.com/groups/technical-functional/sap-log-mm/create-unit-of-measure-1339786
transaction code to create uom is CUNI and you should have an ISO code for that.
Regards, -
How to create stored procedure directely in RPD
Hi Gurus,
I am trying to create stored procedure directly in physical table in rpd level in OBIEE.for this one i have gone through below website.
http://obiee101.blogspot.com/2011/01/obiee-using-mssql-stored-procedure-as.html
in that blog they mentioned to write some query which is...........
EXEC [DATABASE_NAME].[SCHEMA_NAME].[PROCEDURE_NAME]
in above query i am not getting what is DATABASE_NAME,SCHEMA_NAME,PROCEDURE_NAME
can any one elobrate this oneHi nath,
Firstly are you using MYSQL or Oracle as the database,if its oracle database then follow this
http://obiee101.blogspot.com/2008/01/obiee-using-oracle-stored-procedure-to.html
http://oraclebizint.wordpress.com/2008/02/20/oracle-bi-ee-101332-executing-stored-proceduresfunctions-before-reports-before-report-triggers-and-global-temporary-tables/
EXEC [DATABASE_NAME].[SCHEMA_NAME].[PROCEDURE_NAME][DATABASE_NAME] --> is the database name your creating your procedure
[SCHEMA_NAME]-->is the user with which your creating
[PROCEDURE_NAME] --> the name given to procedure
You dont know how to get those run this SQL in TOAD and see select sys_context('userenv','db_name'), sys_context('userenv','session_user') from dual
(OR) open you connection pool properties window in RPD,you will get the DB name and the user name as the schema name
hope answered your question.
CHeers,
KK -
How to create a measure for COUNT and compare year-to-date/last year?
Hello expert,
I have gone through the Oracle by example tutorial for creating the repository. However, I can't find out how to create a measure to display the COUNT (sequence ID). I tried the Aggregation function on the sequence ID on the Fact table but the report on Answer listed out all the sequence IDs in the database. And did not give me the count of the transaction for the period quarter. If I used the sequence ID on Dim table, the SQL failed.
And also I want to have two counts, one is for the count of transactions by quarter. Another is for count of transaction for the same period quarter.
Please help.
Thanks.....If you use count (or count distinct ) as the aggregation rule in the dropdown in the repository column, it should work. Or you can post the generated logical and physical sql here.
-
How to Pass dashboard prompt value to RPD variable??
Hi Experts,
I am creating RPD variable with below query in initialization block
SELECT extract(month from Max(report_date)) from xyz_date_dim where report_id=14 and year=:YEAR
I am having YEAR prompt in dashboard..from this RPD variable i want to get MAX(month) from selected year in dashboard.Here my problem is unable to pass selected YEAR to RPD Initialization block.
I read some threads we can pass user selected values to session variables. If possible can any one help me how to pass variable to achieve my requirement.
can any one help me in this....
Thanks,
KSS.So you want to pick a month in a dashboard prompt and have the answers report filter for that month, and return results for that month, month -1, month -2 etc etc.
If so try the following, lets assume your measure is simply called 'count'
in the BMM you have measure 'count' with aggregation set.
Create a new measure in the BMM called 'count MAGO' or whatever you want (this will be month -1)
in the logical forumula for that column, use the AGO function, syntax would be AGO(count measure,<time dimension.Month>, -1) - this function is found under the 'Time Series Functions' category.
repeat steps to create 'count 2MAGO' and use -2 in the AGO function to take off 2 months.
Repeat for however many Mth Ago's you want.
Then in answers, simply use is prompted on your month fied to filter the report for the relative month, select your 'count', 'count MAGO', 'Count 2MAGO' etc, the measure will be calculated for prior months relative to your filtered month.
Sorted? -
How to create a report in Form line Style and can display Image field?
Hi,
In Report builder 10g, I would like to create a Report with Form Line Style and this report included a Image field.
I can choose this Style only when Select Report type is Paper Layout. Because, If I choose Create both Web & Paper Layout or Create Web Layout only then in the next Style tab 03 option Form, Form letter and Mailing Label be Disabled.
But in Paper Layout, my report can not display Image field.
I tried with Web layout and all the other Styles (Except 03 mentioned be Disabled) then all Styles are displayed Imager field OK.
How to create a report in Form line Style and can display Image field?
I was change File Format property of my Image field from text to Image already in Property Inspector. But report only showed MM for my Image field.
Thanks & regards,
BACH
Message was edited by:
bachnpHere you go..Just follow these steps blindly and you are done.
1) Create a year prompt with presentation variable as pv_year
2) Create a report say Mid report with year column selected 3 times
- Put a filter of pv_year presentation variable on first year column with a default value say @{pv_year}{2008}
- Rename the second time column say YEAR+1 and change the fx to CAST(TIME_DIM."YEAR" AS INT)+1
- Rename the second time column say YEAR-1 and change the fx to CAST(TIME_DIM."YEAR" AS INT)-1
Now when you will run Mid Report, this will give you a records with value as 2008 2009 2007
3) Create your main report with criteria as Year and Measure col
- Change the fx for year column as CAST(TIME_DIM."YEAR" AS INT)
- Now put a filter on year column with Filter based on results of another request and select these:
Relationship = greater than or equal to any
Saved Request = Browse Mid Report
Use values in Column = YEAR-1
- Again,put a filter on year column with Filter based on results of another request and select these:
Relationship = less than or equal to any
Saved Request = Browse Mid Report (incase it doesn't allow you to select then select any other request first and then select Mid Report)
Use values in Column = YEAR+1
This will select Year > = 2007 AND Year < = 2009. Hence the results will be for year 2007,2008,2009
This will 100% work...
http://i56.tinypic.com/wqosgw.jpg
Cheers -
How 2 creat report for displaying the details of a Delivery Document using
how to create report for displaying the details of a Delivery Document using the tables LIKP, LIPS
thank you
regards,
jagrut bharatkumar shukla
points will be rewardedHI
I AM GIVING YOU MY DELIVERY DOCUMENT CODE...MODIFY IT ACCORDING TO YOUR REQUIREMENT
*& Report ZDELIVERY *
report zdelivery message-id z9bhu .
types: begin of t_likp,
vbeln type likp-vbeln, "Delivery
erdat type likp-erdat, "Date for rec creation
* LFDAT TYPE LIKP-LFDAT, "Delevery Date
* WAERK TYPE LIKP-WAERK, "Currency
kunnr type likp-kunnr, "Ship-To Party
kunag type likp-kunag, "Sold-to party
traty type likp-traty, "Means-of-Transport
end of t_likp.
types: begin of t_lips,
vbeln type lips-vbeln, "Delivery
posnr type lips-posnr, "Delivery item
matnr type lips-matnr, "Material Number
arktx type lips-arktx, "Short Text for Sales Order Item
lfimg type lips-lfimg, "Actual quantity delivered
netpr type lips-netpr,
* MEINS TYPE LIPS-MEINS, "Base Unit of Measure
vgbel type lips-vgbel, "Doc no of the reference document
end of t_lips.
types: begin of t_vbpa,
vbeln type vbpa-vbeln, "SD DocumenT Number
posnr type vbpa-posnr, "Item number
parvw type vbpa-parvw, "Partner function
kunnrb type vbpa-kunnr, "Customer Number 1
end of t_vbpa.
types: begin of t_kna1,
kunnr type kna1-kunnr, "Customer Number 1
name1 type kna1-name1, "Name 1
ort01 type kna1-ort01, "City
adrnr type kna1-adrnr, "Address
end of t_kna1.
types: begin of t_li_vbpa,
vbeln type likp-vbeln, "Delivery
erdat type likp-erdat, "Date for rec creation
* LFDAT TYPE LIKP-LFDAT, "Delevery Date
* WAERK TYPE LIKP-WAERK, "Currency
kunnr type likp-kunnr, "Ship-To Party
kunag type likp-kunag, "Sold-to party
traty type likp-traty, "Means-of-Transport
vbeln1 type lips-vbeln, "Delivery
posnr type lips-posnr, "Delivery item
matnr type lips-matnr, "Material Number
arktx type lips-arktx, "Short Text for Sales Order Item
lfimg type lips-lfimg, "Actual quantity delivered
netpr type lips-netpr, "Net Price
* MEINS TYPE LIPS-MEINS, "Base Unit of Measure
vgbel type lips-vgbel, "Doc no of the reference document
vbeln3 type vbpa-vbeln, "SD DocumenT Number
parvw type vbpa-parvw, "Partner function
kunnrb type vbpa-kunnr, "Customer Number 1
end of t_li_vbpa.
types: begin of t_final,
vbeln type likp-vbeln, "Delivery
erdat type likp-erdat, "Date for rec creation
kunnr type likp-kunnr, "Ship-To Party
kunag type likp-kunag, "Sold-to party
traty type likp-traty, "Means-of-Transport
vbeln1 type lips-vbeln, "Delivery
posnr type lips-posnr, "Delivery item
matnr type lips-matnr, "Material Number
arktx type lips-arktx, "Short Text for Sales Order Item
lfimg type lips-lfimg, "Actual quantity delivered
netpr type lips-netpr, "Net Price
vgbel type lips-vgbel, "Doc no of the reference document
vbeln3 type vbpa-vbeln, "SD DocumenT Number
parvw type vbpa-parvw, "Partner function
kunnrb type vbpa-kunnr, "Customer Number 1
name1 type kna1-name1, "Name 1
ort01 type kna1-ort01, "City
adrnr1 type kna1-adrnr, "Address
name2 type kna1-name1, "Name 1
ort02 type kna1-ort01, "City
adrnr2 type kna1-adrnr, "Address
name3 type kna1-name1, "Name 1
ort03 type kna1-ort01, "City
adrnr3 type kna1-adrnr, "Address
end of t_final.
* D A T A D E C L A R A T I O N
*&*********Internal Table Declaration****************&*
data: it_likp type standard table of t_likp.
data: it_lips type standard table of t_lips.
data: it_vbpa type standard table of t_vbpa.
data: it_kna1 type standard table of t_kna1.
data: it_li_vbpa type standard table of t_li_vbpa.
data: it_li_vbpa_temp type standard table of t_li_vbpa.
data: it_final type standard table of t_final.
*&*********Work Area Declaration********************&*
data: wa_likp type t_likp.
data: wa_lips type t_lips.
data: wa_vbpa type t_vbpa.
data: wa_kna1 type t_kna1.
data: wa_li_vbpa type t_li_vbpa.
data: wa_li_vbpa_temp type t_li_vbpa.
data: wa_final type t_final.
*&*********Data Declaration************************&*
data: d_vbeln type likp-vbeln.
data: flag type i value 0.
* S E L E C T I O N S C R E E N D E C L A R A T I O N
selection-screen begin of block block2 with frame title text-001.
select-options: s_vbeln for d_vbeln obligatory. "Delivery no
selection-screen end of block block2.
* A T S E L E C T I O N - S C R E E N E V E N T S
*AT SELECTION-SCREEN.
*PERFORM VALIDATE_DATA.
* S T A R T O F S E L E C T I O N E V E N T S
start-of-selection.
perform fetch_data.
perform merge_data_kna1.
*INCLUDE Z9BT_SH_***4_FORMS.
call function 'OPEN_FORM'
exporting
* APPLICATION = 'TX'
* ARCHIVE_INDEX =
* ARCHIVE_PARAMS =
device = 'PRINTER'
* DIALOG = 'X'
* FORM = ' '
language = sy-langu
* OPTIONS =
* MAIL_SENDER =
* MAIL_RECIPIENT =
* MAIL_APPL_OBJECT =
* RAW_DATA_INTERFACE = '*'
* SPONUMIV =
* IMPORTING
* LANGUAGE =
* NEW_ARCHIVE_PARAMS =
* RESULT =
exceptions
canceled = 1
device = 2
form = 3
options = 4
unclosed = 5
mail_options = 6
archive_error = 7
invalid_fax_number = 8
more_params_needed_in_batch = 9
spool_error = 10
codepage = 11
others = 12
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
sort it_final by vbeln.
loop at it_final into wa_final.
call function 'START_FORM'
exporting
* ARCHIVE_INDEX =
form = 'Z9BT_DELIVERY'
language = sy-langu
* STARTPAGE = ' '
* PROGRAM = ' '
* MAIL_APPL_OBJECT =
* IMPORTING
* LANGUAGE =
exceptions
form = 1
format = 2
unended = 3
unopened = 4
unused = 5
spool_error = 6
codepage = 7
others = 8
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'WRITE_FORM'
exporting
element = 'ITEM_LIST'
function = 'SET'
type = 'BODY'
window = 'MAIN'
* IMPORTING
* PENDING_LINES =
* EXCEPTIONS
* ELEMENT = 1
* FUNCTION = 2
* TYPE = 3
* UNOPENED = 4
* UNSTARTED = 5
* WINDOW = 6
* BAD_PAGEFORMAT_FOR_PRINT = 7
* SPOOL_ERROR = 8
* CODEPAGE = 9
* OTHERS = 10
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'END_FORM'
* IMPORTING
* RESULT =
exceptions
unopened = 1
bad_pageformat_for_print = 2
spool_error = 3
codepage = 4
others = 5
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endloop.
call function 'CLOSE_FORM'
* IMPORTING
* RESULT =
* RDI_RESULT =
* TABLES
* OTFDATA =
exceptions
unopened = 1
bad_pageformat_for_print = 2
send_error = 3
spool_error = 4
codepage = 5
others = 6
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
*& Form VALIDATE_DATA
* text
* --> p1 text
* <-- p2 text
form validate_data .
select single vbeln into wa_likp-vbeln
from likp where vbeln in s_vbeln.
append wa_likp to it_likp.
if sy-subrc <> 0.
flag = 1.
endif.
endform. " VALIDATE_DATA
*& Form FETCH_DATA
* text
* --> p1 text
* <-- p2 text
form fetch_data .
select a~vbeln
a~erdat
a~kunnr
a~kunag
a~traty
b~vbeln
b~posnr
b~matnr
b~arktx
b~lfimg
b~netpr
b~vgbel
c~vbeln
c~parvw
c~kunnr
into table it_li_vbpa
from likp as a
left outer join lips as b on a~vbeln = b~vbeln
inner join vbpa as c on b~vgbel = c~vbeln
where a~vbeln in s_vbeln and
c~parvw = 'RE'.
endform. " FETCH_DATA
*& Form MERGE_DATA_KNA1
* text
* --> p1 text
* <-- p2 text
form merge_data_kna1 .
if it_li_vbpa[] is not initial.
it_li_vbpa_temp[] = it_li_vbpa[].
sort it_li_vbpa_temp by kunnr.
delete adjacent duplicates from it_li_vbpa_temp comparing kunnr.
loop at it_li_vbpa into wa_li_vbpa.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunag.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunnrb.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
endloop.
endif.
if it_li_vbpa_temp[] is not initial.
select kunnr
name1
ort01
adrnr into table it_kna1 from kna1
for all entries in it_li_vbpa_temp
where kunnr = it_li_vbpa_temp-kunnr.
endif.
loop at it_li_vbpa into wa_li_vbpa .
wa_final-vbeln = wa_li_vbpa-vbeln.
wa_final-erdat = wa_li_vbpa-erdat.
*it_final-LFART = it_li_vbpa-LFART.
wa_final-kunnr = wa_li_vbpa-kunnr.
wa_final-kunag = wa_li_vbpa-kunag.
*it_final-VSTEL = it_li_vbpa-VSTEL.
wa_final-traty = wa_li_vbpa-traty.
wa_final-vbeln1 = wa_li_vbpa-vbeln.
wa_final-posnr = wa_li_vbpa-posnr.
wa_final-matnr = wa_li_vbpa-matnr.
wa_final-arktx = wa_li_vbpa-arktx.
wa_final-lfimg = wa_li_vbpa-lfimg.
wa_final-netpr = wa_li_vbpa-netpr.
*wa_final-GEWEI = it_li_vbpa-GEWEI.
*it_final-VOLUM = it_li_vbpa-VOLUM.
*it_final-VOLEH = it_li_vbpa-VOLEH.
wa_final-vgbel = wa_li_vbpa-vgbel.
wa_final-vbeln3 = wa_li_vbpa-vbeln.
*wa_final-PARVW = wa_li_vbpa-PARVW.
wa_final-kunnrb = wa_li_vbpa-kunnrb.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnr.
if sy-subrc = 0.
wa_final-name1 = wa_kna1-name1.
wa_final-ort01 = wa_kna1-ort01.
wa_final-adrnr1 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunag.
if sy-subrc = 0.
wa_final-name2 = wa_kna1-name1.
wa_final-ort02 = wa_kna1-ort01.
wa_final-adrnr2 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnrb.
if sy-subrc = 0.
wa_final-name3 = wa_kna1-name1.
wa_final-ort03 = wa_kna1-ort01.
wa_final-adrnr3 = wa_kna1-adrnr.
endif.
append wa_final to it_final.
clear wa_final.
endloop.
endform. -
How to Create Event polling table
hi,
1)How to Create Event polling table
2) wahts RPD stands for.
3) when we are prefer Dynamic variables.
thanks.
raj1) http://obiee101.blogspot.com/2008/07/obiee-managing-cache-emptyingpurging.html
2) Repository Project Design ?
- More than likely the extension RPD was not used by anything else when Siebel Analytics first started using it, no doubt the 'RP' is repository, so use 'Definition' or 'Design' as you like. Im pretty sure there is nothing in the documentation but i've not checked, maybe you could check and let us know?
3) Dynamic variables would be something like 'CURRENT_MONTH' where the same query does not need to fire per user (ie SESSION variable) but needs to be periodically refreshed. Another use of you dynamic variable might be 'LAST_ETL_DATE' or somethng similar which might implement with your event polling table. By including the Variable within a Business Model, all cache for the Business Model is purged whenever the Variable's value changes. -
I tried already these Tutorials and Advices but I didn't find a solution:
- http://www.ni.com/tutorial/14625/en/
- http://www.ni.com/tutorial/14690/en/
- http://forums.ni.com/t5/LabVIEW/Shared-Library-on-myrio-Linux-Real-time-system/m-p/2842540/
- http://forums.ni.com/t5/LabVIEW/How-to-create-shared-library-for-linux-real-time-target-in/m-p/28218...
- and some more
I want use c++ codes on linux real time. For testing reasons I want to have a function that adds 2 values and gives the result.
I've done these steps:
1. writing a c++ file in Eclipse (see screensot 2)
2. building a shared library (.so) from my c++ project in Eclipse (with Cross GCC)
3. putting this file on myRio (path: /usr/local/lib/)
4. creating a VI that calls this library from Labview with a "Call Library Function Node" (see screenshot3)
5. Setting the properties for the "Call Library Function Node" (see screenshots 4-7)
After I run this VI i get this error message: LabVIEW: (Hex 0x627) The function name for the ... node cannot be found in the library. To correct this error, right-click the Call Library Function Node and select Configure from the shortcut menu. Then choose the correct function name. (see screenshot1)
I've tried a lot things to solve this problem but I couldn't find a solution. Would be very happy if anyone can help me. I guess that I have to edit my c++ code to export my function (symbol). But I have no idea how to make it. I also tried it with a dll file in the same folder but it didn't help.
Perhaps someone can send an example which works on myRIO.
Thanks!
screenshot1
screenshot2
screenshot3
screenshot4
screenshot5
screenshot6
screenshot7can see it in the screenshot8 there is a function called "_Z8AddierenddPd" instead of "Addieren". I copied this name to Labview (see screenshot9) and it worked.
I'm sure that there is a way to compile the shared folder with gcc without decorations (mangling). But I don't know how. If someone has a recommendation I would be very glad!
Prepend each function declaration that you want to be available without name decoration with
extern "C" <your function declaration>
Or if you have multiple functions you want to export you can in the header file where you declare your functions simply use:
#ifdef __cplusplus
extern "C" {
#endif
<all your function declarations>
#ifdef __cplusplus
#endif
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions -
Sap script '' how to create table frame in sap script"""
i have some problem in sap script'' how to create table frame in sap script"""
Hi,
you can use BOX command..
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT and FRAME both a measurement and a unit of measurement must be specified. The INTENSITY parameter should be specified as a percentage between 0 and 100.
1. XPOS, YPOS: Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
2. WIDTH: Width of the box. Default: WIDTH value of the SIZE command.
3. HEIGHT: Height of the box. Default: HEIGHT value of the SIZE command.
4. FRAME: Thickness of frame.
Default: 0 (no frame).
5. INTENSITY: Grayscale of box contents as % .
Default: 100 (full black)
Measurements: Decimal numbers must be specified as literal values (like ABAP numeric constants) by being enclosed in inverted commas. The period should be used as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the layout set header
1 LN = height of a line relative to the LPI specification in the layout set header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shadowing having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
check the fallowing link also
http://help.sap.com/saphelp_40b/helpdata/en/d1/803293454211d189710000e8322d00/content.htm
Mark the points if u find it useful...
Regards,
Omkar. -
How to create a .DLL file from a .C file ?
Hi everybody
I'm looking for a method how to create a .DLL file from a .C file .That Dll file will be used to perform a board to measure voice quality accoding to the international standard named PESQ (perceptual evaluation of speech qualty) P.862.
Can anyone help to start dealing with Dlls and give some advices to avoid errors ?
thx
Attachments:
source.zip 37 KBHi sinaps,
You mention that you want to create a DLL from a .C file. Just to clarify, are you using C (.c file) or C++ (.cpp) to write your code?
Also, if you are using C++, are you using Visual Studio? (The reason I ask is because this forum is geared towards Measurement Studio, which is an add on to Microsoft Visual Studio).
That being said,
If you are using C: National Instruments provides an ANSI C Application Development Environment called LabWindows/CVI which makes building dlls a snap. It has templates for DLLs and you can build them either as stdcall or cdecl dlls.
Developer Zone Tutorial: Building a DLL with LabWindows/CVI 8.5 for use with LabVIEW 8.5
If you are using Visual C++: Look at the link that Al provided earlier.
MSDN: Walkthrough: Creating and Using a Dynamic Link Library
If you aren't using CVI or Visual Studio, then really the best bet is to do a google search for "Create C DLL" or post or a forum for the appropriate environment that you are using.
Thanks!
Message Edited by Jervin_J on 03-14-2009 02:02 PM
Jervin Justin
NI TestStand Product Manager -
HOW TO CREATE A DRILLDOWN PROGRAM NEED EXAMPLE
HAI FRIENDS
1 I WANT TO KNOW HOW TO CREATE A DRILLDOWN PROGRAM NEED EXAMPLE IN ABAP
2 NEED ABAP PROGRAM EBOOK
PLZ DO ITCHECK THIS ALV DRILL DOWN REPORT
*& Report ZHAI_SD_CUSTOMER_DETAILS_ALV
REPORT ZHAI_SD_CUSTOMER_DETAILS_ALV.
TYPE-POOLS: SLIS.
TYPES DECLARATIONS
TABLES : KNA1.
DATA : BEGIN OF IT_CUST OCCURS 0,
KUNNR LIKE KNA1-KUNNR,
NAME1 LIKE KNA1-NAME1,
LAND1 LIKE KNA1-LAND1,
ORT01 LIKE KNA1-ORT01,
STRAS LIKE KNA1-STRAS,
PSTLZ LIKE KNA1-PSTLZ,
END OF IT_CUST.
DATA:BEGIN OF IT_SALE OCCURS 0,
VBELN LIKE VBAK-VBELN,"SALES DOC NO
AUDAT LIKE VBAK-AUDAT,"DATE RECIEVED AND SENT
AUART LIKE VBAK-AUART,"SALES DOC LIKE
NETWR LIKE VBAK-NETWR,"NET VALUE IN DOC CURRENCY
KUNNR LIKE VBAK-KUNNR,
END OF IT_sale.
TYPES: BEGIN OF TY_ITEM,
VBELN TYPE VBAP-VBELN,
POSNR TYPE VBAP-POSNR,"ITEM NO
MATNR TYPE VBAP-MATNR,"MATERIAL NO
CHARG TYPE VBAP-CHARG,"BATCH
MATKL TYPE VBAP-MATKL,"MATERIAL GROUP
MEINS TYPE VBAP-MEINS,"BASE UNIT OF MEASURE
END OF TY_ITEM.
SELECT-OPTIONS : S_KUNNR FOR KNA1-KUNNR.
INTERNAL TABLES
DATA:
IT_CUST TYPE TABLE OF TY_CUST,
IT_SALE TYPE TABLE OF TY_SALE,
IT_ITEM TYPE TABLE OF TY_ITEM.
INTERNAL TABLES FOR ALV
DATA: IT_FCAT TYPE SLIS_T_FIELDCAT_ALV,
IT_FCAT1 TYPE SLIS_T_FIELDCAT_ALV,
IT_FCAT3 TYPE SLIS_T_FIELDCAT_ALV.
DATA: IT_EVENTS TYPE TABLE OF slis_alv_event,
IT_EVENTS1 TYPE TABLE OF SLIS_ALV_EVENT,
IT_EVENTS2 TYPE TABLE OF SLIS_ALV_EVENT.
DATA: IT_LISTHEADER1 TYPE SLIS_T_LISTHEADER,
IT_LISTHEADER TYPE TABLE OF slis_listheader,
IT_LISTHEADER3 TYPE TABLE OF SLIS_LISTHEADER,
IT_FOOTER TYPE TABLE OF SLIS_LISTHEADER.
DATA: IT_SORT TYPE SLIS_T_SORTINFO_ALV,
WA_SORT LIKE LINE OF IT_SORT.
WORK AREAS FOR ALV
DATA: WA_LAYOUT TYPE SLIS_LAYOUT_ALV,
WA_LAYOUT1 TYPE SLIS_LAYOUT_ALV,
WA_FCAT LIKE LINE OF IT_FCAT,
WA_FCAT1 LIKE LINE OF IT_FCAT1,
WA_FCAT3 LIKE LINE OF IT_FCAT3,
WA_EVENTS LIKE LINE OF IT_EVENTS,
WA_EVENTS1 LIKE LINE OF IT_EVENTS,
WA_EVENTS2 LIKE LINE OF IT_EVENTS.
WORK VARIABLES
DATA: W_REPID TYPE SY-REPID,
W_KUNNR TYPE KNA1-KUNNR.
$$**----
WORK AREAS
MACROS
DEFINE ADD_FCAT1..
WA_FCAT1-COL_POS = &1.
WA_FCAT1-FIELDNAME = &2.
WA_FCAT1-TABNAME = &3.
WA_FCAT1-REF_TABNAME = &4.
WA_FCAT1-KEY = &5.
WA_FCAT1-DO_SUM = &6.
WA_FCAT1-HOTSPOT = &7.
WA_FCAT1-EMPHASIZE = &8.
APPEND WA_FCAT1 TO IT_FCAT1.
END-OF-DEFINITION.
START-OF-SELECTION.
PERFORM F_GET_DATA.
PERFORM F_BUILD_FCAT.
PERFORM F_GET_EVENTS.
PERFORM F_BUILD_LAYOUT USING WA_LAYOUT.
PERFORM F_GET_DISPLAY.
*& Form F_GET_DATA
FORM F_GET_DATA .
SELECT KUNNR
NAME1
LAND1
ORT01
STRAS
PSTLZ FROM KNA1
INTO TABLE
IT_CUST WHERE KUNNR IN S_KUNNR.
ENDFORM. " F_GET_DATA
*& Form F_GET_DISPLAY
text
--> p1 text
<-- p2 text
FORM F_GET_DISPLAY .
CLEAR W_REPID.
MOVE SY-REPID TO W_REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = w_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = 'F_TOP_OF_PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = 'DUCK'
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = WA_LAYOUT
IT_FIELDCAT = IT_FCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = IT_EVENTS
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_CUST
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " F_GET_DISPLAY
*& Form F_GET_EVENTS
text
--> p1 text
<-- p2 text
FORM F_GET_EVENTS .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = IT_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SORT IT_EVENTS.
READ TABLE IT_EVENTS INTO WA_EVENTS
WITH KEY NAME = 'TOP_OF_PAGE' BINARY SEARCH.
IF SY-SUBRC EQ 0.
WA_EVENTS-FORM = 'F_TOP_OF_PAGE'.
MODIFY IT_EVENTS INDEX SY-TABIX FROM
WA_EVENTS TRANSPORTING FORM.
ENDIF.
READ TABLE IT_EVENTS INTO WA_EVENTS
WITH KEY NAME = 'USER_COMMAND' BINARY SEARCH.
IF SY-SUBRC EQ 0.
WA_EVENTS-FORM = 'F_USER_COMMAND'.
MODIFY IT_EVENTS FROM WA_EVENTS INDEX
SY-TABIX TRANSPORTING FORM.
READ TABLE IT_EVENTS INTO WA_EVENTS
WITH KEY NAME = 'USER_COMMAND' BINARY SEARCH.
ENDIF.
READ TABLE IT_EVENTS INTO WA_EVENTS WITH
KEY NAME = 'END_OF_PAGE' BINARY SEARCH.
IF SY-SUBRC EQ 0.
WA_EVENTS-FORM = 'F_END_OF_PAGE'.
MODIFY IT_EVENTS FROM WA_EVENTS
INDEX SY-TABIX TRANSPORTING FORM.
ENDIF.
ENDFORM. "F_GET_EVENTS
*& Form F_BUILD_LAYOUT
FORM F_BUILD_LAYOUT USING P_WA_LAYOUT LIKE WA_LAYOUT .
CLEAR P_WA_LAYOUT.
P_WA_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
*P_WA_LAYOUT-F2CODE = '&ETA'.
*p_wa_layout-detail_popup = 'X'.
P_WA_LAYOUT-DETAIL_TITLEBAR = 'ALV REPORT'.
*P_WA_LAYOUT-CONFIRMATION_PROMPT = 'X'.
ENDFORM. " F_BUILD_LAYOUT
*& Form F_TOP_OF_PAGE
FORM F_TOP_OF_PAGE .
refresh it_listheader.
DATA: LS_LIST TYPE SLIS_LISTHEADER.
LS_LIST-TYP = 'H'.
LS_LIST-INFO = TEXT-004.
APPEND LS_LIST TO IT_LISTHEADER.
LS_LIST-typ = 'S'.
LS_LIST-key = 'Date: '.
CONCATENATE sy-datum+6(2) '.'
sy-datum+4(2) '.'
sy-datum(4) INTO LS_LIST-info. "todays date
append LS_LIST to IT_LISTHEADER.
clear: LS_LIST.
LS_LIST-TYP = 'S'.
LS_LIST-KEY = 'DEVELOPED:'.
LS_LIST-INFO = SY-UNAME.
APPEND LS_LIST TO IT_LISTHEADER.
CLEAR LS_LIST.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER
I_LOGO = 'GLOBAL'.
ENDFORM. " F_TOP_OF_PAGE
*& Form F_BUILD_FCAT
FORM F_BUILD_FCAT .
CLEAR: W_REPID,
IT_FCAT.
MOVE SY-REPID TO W_REPID.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = W_REPID
I_INTERNAL_TABNAME = 'IT_CUST'
I_INCLNAME = W_REPID
CHANGING
CT_FIELDCAT = IT_FCAT
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " F_BUILD_FCAT
*& Form F_USER_COMMAND
FORM F_USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN '&IC1'.
IF RS_SELFIELD-FIELDNAME = 'KUNNR'.
READ TABLE IT_CUST
INDEX RS_SELFIELD-TABINDEX.
MOVE rs_selfield-value TO W_KUNNR.
IF IT_CUST IS NOT INITIAL.
PERFORM F_GET_SECONDARY_DATA.
PERFORM F_BUILD_FCAT1.
PERFORM F_BUILD_EVENTS.
PERFORM F_GET_SORT.
PERFORM F_BUILD_LAYOUT1.
PERFORM F_GET_DISPLAY1.
ENDIF.
ENDIF.
ENDCASE.
ENDFORM. " F_USER_COMMAND
*& Form F_GET_SECONDARY_DATA
FORM F_GET_SECONDARY_DATA .
data:v_data.
SELECT VBELN
AUDAT
AUART
NETWR
KUNNR FROM VBAK INTO TABLE IT_SALE
WHERE KUNNR EQ IT_CUST-KUNNR.
IF IT_SALE[] IS INITIAL .
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
TITLEBAR = SY-REPID
DIAGNOSE_OBJECT = ' '
TEXT_QUESTION = 'NO SALES FOR THIS CUSTOMER'
TEXT_BUTTON_1 = 'Ja'(001)
ICON_BUTTON_1 = ' '
TEXT_BUTTON_2 = 'Nein'(002)
ICON_BUTTON_2 = ' '
DEFAULT_BUTTON = '1'
DISPLAY_CANCEL_BUTTON = 'X'
USERDEFINED_F1_HELP = ' '
START_COLUMN = 25
START_ROW = 6
POPUP_TYPE =
IV_QUICKINFO_BUTTON_1 = ' '
IV_QUICKINFO_BUTTON_2 = ' '
IMPORTING
ANSWER = v_data
TABLES
PARAMETER =
EXCEPTIONS
TEXT_NOT_FOUND = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
case v_data.
when '2'.
leave screen.
when 'A'.
leave to screen '0'.
endcase.
ENDIF.
ENDFORM. " F_GET_SECONDARY_DATA
*& Form F_BUILD_FCAT1
FORM F_BUILD_FCAT1 .
REFRESH IT_FCAT1.
CLEAR WA_FCAT1.
ADD_FCAT1:
'1' 'VBELN' 'VBAK' 'VBAK' 'X' ' ' 'X' 'C500',
'2' 'AUDAT' 'VBAK' 'VBAK' ' ' ' ' ' ' 'C400',
'3' 'AUART' 'VBAK' 'VBAK' ' ' ' ' ' ' 'C100',
'4' 'NETWR' 'VBAK' 'VBAK' ' ' 'X' ' ' 'C300'.
ENDFORM. " F_BUILD_FCAT1
*& Form F_GET_DISPLAY1
text
--> p1 text
<-- p2 text
FORM F_GET_DISPLAY1 .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'F_USER_COMMAND1'
I_CALLBACK_TOP_OF_PAGE = 'F_TOP_OF_PAGE1'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT = IT_FCAT1
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT = IT_SORT
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = IT_EVENTS1
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_SALE
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " F_GET_DISPLAY1
*& Form F_BUILD_EVENTS
FORM F_BUILD_EVENTS .
clear wa_events1.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = IT_EVENTS1.
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SORT IT_EVENTS1.
read table It_events1 with key name = 'TOP_OF_PAGE'
into WA_eventS1.
if sy-subrc = 0.
move 'F_TOP_OF_PAGE1' to WA_EventS1-form.
append WA_eventS1 to it_events1.
endif.
READ TABLE IT_EVENTS WITH KEY NAME = 'USER_COMMAND'
INTO WA_EVENTS1.
IF SY-SUBRC = 0.
MOVE 'F_USER_COMMAND1' TO WA_EVENTS1-FORM.
APPEND WA_EVENTS1 TO IT_EVENTS1.
ENDIF.
*READ TABLE IT_EVENTS WITH KEY NAME = 'SUBTOTAL_TEXT'
INTO WA_EVENTS1.
IF SY-SUBRC = 0.
MOVE 'F_SUBTOTAL_TEXT' TO WA_EVENTS1-FORM.
APPEND WA_EVENTS1 TO IT_EVENTS1.
ENDIF.
ENDFORM. " F_BUILD_EVENTS
*& Form F_TOP_OF_PAGE1
FORM F_TOP_OF_PAGE1 .
DATA: LS_HEADER TYPE SLIS_LISTHEADER.
REFRESH : IT_LISTHEADER1.
LS_HEADER-TYP = 'H'.
LS_HEADER-INFO = 'SALES ORDER DETAILS FOR CUSTOMER'.
APPEND LS_HEADER TO it_listheader1.
CLEAR LS_HEADER.
LS_HEADER-TYP = 'S'.
LS_HEADER-KEY = 'CUSTOMER NO:'.
LS_HEADER-INFO = W_KUNNR.
APPEND LS_HEADER TO IT_LISTHEADER1.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER1
I_LOGO = 'DUCK'
I_END_OF_LIST_GRID =
I_ALV_FORM =
ENDFORM. " F_TOP_OF_PAGE
*& Form F_END_OF_PAGE
text
--> p1 text
<-- p2 text
FORM F_END_OF_PAGE .
DATA:LS_FOOTER TYPE SLIS_LISTHEADER.
LS_FOOTER-TYP = 'S'.
LS_FOOTER-KEY = SY-UNAME.
LS_FOOTER-INFO = 'DEVELOPED BY:'.
APPEND LS_FOOTER TO IT_FOOTER.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_FOOTER
ENDFORM. " F_END_OF_PAG
*& Form F_USER_COMMAND1
text
--> p1 text
<-- p2 text
FORM F_USER_COMMAND1 USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN '&IC1'.
READ TABLE IT_SALE INDEX RS_SELFIELD-TABINDEX.
PERFORM F_GET_SECONDARY2.
PERFORM F_GET_FCAT3 USING:
'VBELN' '1' 'C' '12' 'SALES_DOC' 'M' 'VBAP' 'X' 'C51' ' ',
'POSNR' '2' ' ' '5' 'ITEM_NO' 'M' 'VBAP' ' ' 'C61' ' ',
'MATNR' '3' ' ' '12' 'MATERIAL_NO' 'M' 'VBAP' ' ' 'C71' ' ',
'CHARG' '4' ' ' '10' 'BATCH_NO' 'M' 'VBAP' ' ' 'C41' ' ',
'MATKL' '5' ' ' '10' 'MAT_GROUP' 'M' 'VBAP' ' ' 'C31' ' ',
'MEINS' '6' ' ' '12' 'BASE_UNIT' 'M' 'VBAP' ' ' 'C21' 'X' .
PERFORM F_GET_EVENTS2 USING WA_EVENTS2
CHANGING IT_EVENTS2.
PERFORM F_GET_DISPLAY3.
REFRESH IT_FCAT3.
ENDCASE.
ENDFORM. " F_USER_COMMAND1
*& Form F_GET_SECONDARY2
text
--> p1 text
<-- p2 text
FORM F_GET_SECONDARY2 .
SELECT VBELN
POSNR
MATNR
MATKL
MEINS
FROM VBAP INTO
TABLE IT_ITEM WHERE
VBELN EQ IT_SALE-VBELN.
IF SY-DBCNT EQ 0.
MESSAGE E000(ZHAI) WITH TEXT-KO1.
ENDIF.
ENDFORM. " F_GET_SECONDARY2
*& Form F_GET_DISPLAY3
text
--> p1 text
<-- p2 text
FORM F_GET_DISPLAY3 .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'F_PF_STATUS'
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = 'F_TOP_OF_PAGE3'
I_CALLBACK_HTML_TOP_OF_PAGE = 'F_TOP_OF_PAGE3'
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = WA_LAYOUT1
IT_FIELDCAT = IT_FCAT3
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT = IT_SORT
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = IT_EVENTS2
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_ITEM
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " F_GET_DISPLAY3
*& Form F_GET_FCAT3
FORM F_GET_FCAT3 USING VALUE(P1)
VALUE(P2)
VALUE(P3)
VALUE(P4)
VALUE(P5)
VALUE(P6)
VALUE(P7)
VALUE(P8)
VALUE(P9)
VALUE(P10).
CLEAR WA_FCAT3.
WA_FCAT3-FIELDNAME = P1.
WA_FCAT3-COL_POS = P2.
WA_FCAT3-JUST = P3.
WA_FCAT3-OUTPUTLEN = P4.
WA_FCAT3-SELTEXT_M = P5.
WA_FCAT3-DDICTXT = P6.
WA_FCAT3-REF_TABNAME = P7.
WA_FCAT3-HOTSPOT = P8.
WA_FCAT3-EMPHASIZE = P9.
WA_FCAT3-DO_SUM = P10.
APPEND WA_FCAT3 TO IT_FCAT3.
ENDFORM. " F_GET_FCAT3
*& Form F_BUILD_LAYOUT1
text
--> p1 text
<-- p2 text
FORM F_BUILD_LAYOUT1 .
WA_LAYOUT1-totals_text = 'TOTAL'.
wa_layout1-detail_popup = 'X'.
ENDFORM. " F_BUILD_LAYO
*& Form F_GET_EVENTS2
text
-->P_IT_EVENTS2 text
<--P_WA_EVENTS2 text
FORM F_GET_EVENTS2 USING VALUE(P_WA_EVENTS2) LIKE WA_EVENTS2
CHANGING P_IT_EVENTS2 LIKE IT_EVENTS2.
P_WA_EVENTS2-NAME = 'HTML_TOP_OF_PAGE'.
P_WA_EVENTS2-FORM = 'F_TOP_OF_PAGE3'.
APPEND P_WA_EVENTS2 TO P_IT_EVENTS2.
CLEAR P_WA_EVENTS2.
P_WA_EVENTS2-NAME = 'PF_STATUS'.
P_WA_EVENTS2-FORM = 'F_PF_STATUS'.
APPEND P_WA_EVENTS2 TO P_IT_EVENTS2.
CLEAR P_WA_EVENTS2.
P_WA_EVENTS2-NAME = 'USER_COMMAND'.
P_WA_EVENTS2-FORM = 'F_USER_COMMAND3'.
APPEND P_WA_EVENTS2 TO P_IT_EVENTS2.
CLEAR P_WA_EVENTS2.
p_wa_events2-name = 'HTML_END_OF_LIST'.
P_WA_EVENTS2-FORM = 'F_HTML_END_OF_LIST'.
APPEND P_WA_EVENTS2 TO P_IT_EVENTS2.
CLEAR p_wa_events2.
ENDFORM. " F_GET_EVENTS2
*& Form F_TOP_OF_PAGE3
text
--> p1 text
<-- p2 text
FORM F_TOP_OF_PAGE3 USING DOCUMENT TYPE REF TO cl_dd_document .
data : link_area type ref to cl_dd_area,
picture_area type ref to cl_dd_area.
CALL METHOD DOCUMENT->ADD_TEXT
EXPORTING
TEXT = 'ALV REPORT'
TEXT_TABLE =
FIX_LINES =
SAP_STYLE =
SAP_COLOR = cl_dd_area=>list_background_int
SAP_FONTSIZE = 'LARGE'
SAP_FONTSTYLE = 'TIMES'
SAP_EMPHASIS = 'STRONG'
STYLE_CLASS =
CHANGING
DOCUMENT =
CALL METHOD DOCUMENT->NEW_LINE.
CALL METHOD DOCUMENT->ADD_PICTURE
EXPORTING
PICTURE_ID = 'LOGO1'
WIDTH = '10%'
ENDFORM. " F_TOP_OF_PAGE3
*& Form F_GET_SORT
text
--> p1 text
<-- p2 text
FORM F_GET_SORT .
WA_SORT-FIELDNAME = 'NETWR'.
WA_SORT-SPOS = 4.
WA_SORT-UP = 'X'.
WA_SORT-SUBTOT = 'X'.
APPEND WA_SORT TO IT_SORT.
ENDFORM. " F_GET_SORT
*& Form F_PF_STATUS
text
--> p1 text
<-- p2 text
FORM F_PF_STATUS USING RS_EXTAB TYPE SLIS_T_EXTAB .
SET PF-STATUS 'ZHAIALV' EXCLUDING RS_EXTAB.
ENDFORM. " F_PF_STATUS
*& Form F_USER_COMMAND3
text
--> p1 text
<-- p2 text
FORM F_USER_COMMAND3 USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN '&SALE'.
IF RS_SELFIELD-FIELDNAME = 'VBELN'.
SET parameter ID 'AUN' FIELD rs_selfield-value.
CALL TRANSACTION 'VA02' AND SKIP FIRST SCREEN.
ENDIF.
WHEN '&MAT'.
IF RS_SELFIELD-FIELDNAME = 'MATNR'.
SET PARAMETER ID 'MAT' FIELD RS_SELFIELD-VALUE.
CALL TRANSACTION 'MM02' AND SKIP FIRST SCREEN.
ENDIF.
ENDCASE.
ENDFORM. " F_USER_COMMAND3
*& Form F_HTML_END_OF_LIST
text
--> p1 text
<-- p2 text
FORM F_HTML_END_OF_LIST USING DOCUMENT TYPE REF TO CL_DD_DOCUMENT.
DATA : PAGE TYPE SDYDO_TEXT_ELEMENT.
MOVE SY-PAGNO TO PAGE.
CALL METHOD DOCUMENT->ADD_TEXT
EXPORTING
TEXT = PAGE
TEXT_TABLE =
FIX_LINES =
SAP_STYLE =
SAP_COLOR =
SAP_FONTSIZE =
SAP_FONTSTYLE =
SAP_EMPHASIS =
STYLE_CLASS =
CHANGING
DOCUMENT =
ENDFORM. " F_HTML_END_OF_LIS -
hi
can anyone send how to create box, like table including vertical and horizontal lines in sap-scripts
regards
ratnaBOX Command
Syntax
/: BOX
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT, and FRAME, you must specify both a measurement and a unit of measurement. Specify the INTENSITY parameter as a percentage between 0 and 100.
XPOS, YPOS
Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
WIDTH
Width of the box. Default: WIDTH value of the SIZE command.
HEIGHT
Height of the box. Default: HEIGHT value of the SIZE command.
FRAME
Thickness of frame.
Default: 0 (no frame).
INTENSITY
Grayscale of box contents as %.
Default: 100 (full black)
Measurements: You must specify decimal numbers as literal values (like ABAP numeric constants) by enclosing them in inverted commas. Use the period as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
· TW (twip)
· PT (point)
· IN (inch)
· MM (millimeter)
· CM (centimeter)
· LN (line)
· CH (character).
The following conversion factors apply:
· 1 TW = 1/20 PT
· 1 PT = 1/72 IN
· 1 IN = 2.54 CM
· 1 CM = 10 MM
· 1 CH = height of a character relative to the CPI specification in the form header
· 1 LN = height of a line relative to the LPI specification in the form header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shading having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
SIZE Command
Syntax
/: SIZE
Effect: Sets the values of the WIDTH and HEIGHT parameters used in the BOX command. When a window is first started, the SIZE value is set to the same values as the window itself (default setting).
Parameters: If one of the parameter specifications is missing, then no change is made to the current value of this parameter. If a parameter value does not have a leading sign, then its value is interpreted as an absolute value. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value.
WIDTH, HEIGHT
Dimensions of the rectangle or line.
WINDOW
Sets the values for the width and height to the values of the current window (default setting).
PAGE
Sets the values for the width and height to the values of the current output page.
/: SIZE WINDOW
Sets WIDTH and HEIGHT to the current window dimensions.
/: SIZE WIDTH '3.5' CM HEIGHT '7.6' CM
Sets WIDTH to 3.5 cm and HEIGHT to 7.6 cm.
/: POSITION WINDOW
/: POSITION XORIGIN -20 TW YORIGIN -20 TW
/: SIZE WIDTH +40 TW HEIGHT +40 TW
/: BOX FRAME 10 TW
A frame is added to the current window. The edges of the frame extend beyond the edges of the window itself, so as to avoid obscuring the leading and trailing text characters.
Maybe you are looking for
-
I am getting a NullPointerException when trying to use the Service class
I am getting a NullPointerException which is as follows java.lang.NullPointerException file:/K:/Learner/JavaFx2/ProductApplication/dist/run166129449/ProductApplication.jar!/com/product/app/view/viewsingle.fxml at com.product.app.controller.ViewSing
-
Can not take a screenshot with Maverick and track pad. can not use apple chat to talk with a tech. there are other issues also like I used to be able to go back a page with the delete button. No Maverick PDF to instruct on how to use Maverick THE
-
How can i find out field for a particular component type
hi, how can i find out for particular component name is belongs to this field.....that means REF_DOC_NO componemt is belongs to xblnr field ..../.if we know only component type ...how to find the field... plz tell me thanks®ards, kalyan
-
HELP. Aperture 3.2.1 crash before open in Lion 10.7.2
I downloaded Aperture 3.2.1 from my AppleStore installed in my iMac core duo 2.4GHZ 3GB RAM and when I tried to open it crash immediately before open it and the system open a dialog box with the info related with the problem. I installed the Lion fro
-
JEditorPane +html generation
Hi, I am using JEditorPane as WYSIWIG editor for html, everythings fine, but when i get html source (with getText()) i have font attributes ok (bold, italic etc.), but paragraph attributes are not inserted, i cannot handle with this problem and my JD