How to create an folder in Usermenu and SAP Menu

Hi Friends,
I want to create an folder in (usermenu or sapmenu) Navigation. Is this possible?
Thanks in Advance

Hi Abdul,
I dont think it is possible to create a new folder in Usermenu, another folder "Favorites" is there for this purpose. You can very well add new folders/transaction or URL etc into the favorites. So please go ahead and customize your favorites to suit your requirements.
Regards
Dev

Similar Messages

  • How to create shared folder between mac and windows

    how to create shared folder between mac and windows

    Us ean external drive formatted FAT32 or ExFat. Both OSx and Windows can read/write to the drive and both can use the same data files as long as you have a program that can open and save these files. For example, Word running both on OSx and on Windows will be able to work with the same document on the external drive.

  • How to create a folder (in unified folders) which contains all the messages of inboxes and outboxes

    Hi, i've searched without success how to create a folder (in unified folders) which contains all the messages of inboxes and outboxes (as it exists in Windows Live Mail).
    For me, it would be very useful to search in only one folder when i try to find something in sent and received mails.
    Thank's

    This is what Unified Folders does. I'm not sure what exactly you're trying to achieve.
    http://kb.mozillazine.org/Global_Inbox#Unified_Folders
    You might take a look at this article.
    https://support.mozilla.org/en-US/kb/global-search

  • HOW TO CREATE SEVERAL folder for the generation and READING FILE

    HOW TO CREATE SEVERAL folder for the generation and READING FILE WITH THE COMMAND utl_File.
    please give an example to create 3 folders or directories ...
    I appreciate your attention ...
    Reynel Martinez Salazar

    I hope this link help you.
    [http://www.adp-gmbh.ch/ora/sql/create_directory.html]
    create or replace directory exp_dir as '/tmp';
    grant read, write on directory exp_dir to eygle;
    SQL> create or replace directory UTL_FILE_DIR as '/opt/oracle/utl_file';
    Directory created.
    SQL> declare
      2    fhandle utl_file.file_type;
      3  begin
      4    fhandle := utl_file.fopen('UTL_FILE_DIR', 'example.txt', 'w');
      5    utl_file.put_line(fhandle , 'eygle test write one');
      6    utl_file.put_line(fhandle , 'eygle test write two');
      7    utl_file.fclose(fhandle);
      8  end;
      9  /
    PL/SQL procedure successfully completed.
    SQL> !
    [oracle@jumper 9.2.0]$ more /opt/oracle/utl_file/example.txt
    eygle test write one
    eygle test write two
    [oracle@jumper 9.2.0]$
    SQL> declare
      2    fhandle   utl_file.file_type;
      3    fp_buffer varchar2(4000);
      4  begin
      5    fhandle := utl_file.fopen ('UTL_FILE_DIR','example.txt', 'R');
      6 
      7    utl_file.get_line (fhandle , fp_buffer );
      8    dbms_output.put_line(fp_buffer );
      9    utl_file.get_line (fhandle , fp_buffer );
    10    dbms_output.put_line(fp_buffer );
    11    utl_file.fclose(fhandle);
    12  end;
    13  /
    eygle test write one
    eygle test write two
    PL/SQL procedure successfully completed.
    SQL> select * from dba_directories;
    OWNER                          DIRECTORY_NAME                 DIRECTORY_PATH
    SYS                            UTL_FILE_DIR                   /opt/oracle/utl_file
    SYS                            BDUMP_DIR                      /opt/oracle/admin/conner/bdump
    SYS                            EXP_DIR                        /opt/oracle/utl_file
    SQL> drop directory exp_dir;
    Directory dropped
    SQL> select * from dba_directories;
    OWNER                          DIRECTORY_NAME                 DIRECTORY_PATH
    SYS                            UTL_FILE_DIR                   /opt/oracle/utl_file
    SYS                            BDUMP_DIR                      /opt/oracle/admin/conner/bdumpRegards salim.
    Edited by: Salim Chelabi on Apr 4, 2009 4:33 PM

  • How to create a folder for a specific e-mail account?

    How to create a folder for a specific e-mail account?
    I'm using a POP e-mail account and I would like to create folders / sub-folders... how can I do this?

    You can right click on your Desktop and select New Folder.  In Finder File > New Folder should work too, not in front of my Mac.
    Welcome to back by the way.  You might find these websites helpful.
    Switch 101
    Mac 101

  • How to create a folder to store my mail?

    hi,
    can u tell me how to create a folder to store my outgoing mails using java mail.
    Million Thanks for u
    With luv
    kathir

    hi chiru,
    Thanks for ur reply.Can u tell me how to configure IMAP.I've tried to configure IMAP in outlook and then i run the program with the code u sent,but it throws
    " javax.mail.NoSuchProviderException: No provider for IMAP
    at javax.mail.Session.getProvider(Session.java:289)
    at javax.mail.Session.getStore(Session.java:363)
    at javax.mail.Session.getStore(Session.java:343)
    at MessageSend.main(MessageSend.java:61)
    Plz give me some soln for this excep.
    Thanks in advance
    Regs
    Kathiravan

  • How to create a folder dynamically in KM repository

    Hi All,
    Could you please let me know how to create the folder dynamically in KM...
    Thanks in Advance,

    >
    Romano Bodini wrote:
    > Hi,
    >
    > Search the forum. And the SDN. Then ask.
    >
    > [Creating folders in KM dynamically|http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/1761]
    >
    > Romano
    Actually, "look at the API documentation" should be in that list.

  • How to create new folder on laundchpad?

    How to create new folder on launchpad? I am new, sorry

    Hi Amauri17,
    Launchpad works just like iOS if you're familar with the folder structure. Click, hold and drag one application onto another and it'll group them into a folder.

  • How to create a drop down box and text box in screen painter?

    Hi i am totally new to this concept of screen painter..please can any tell me
    how to create drop down box in screen painter?
    How to create or display default date and time values?
    How to create text box for giving comments?
    How to store the records that we are entering in a table?
    Please can any one send me the procedure for creating all these its very urgent useful information will be surely rewarded.

    Hi,
    Check all these.
    1.how to create drop down box in screen painter?
    To get Drop Drown Box on screen .
    Follow these steps.
    1.
    Go to T.Code SE51 and Select Laypout for the Screen.
    2.
    Double click on the field for which u want Dropdown box.
    3.
    Then U will see Name ,Text ,DROPDOWN.Click on that and select List Box or ListBox with key . Better to to select first one.
    4.
    Save and Activate ur screen .
    5.
    Enter the following piece of code in the PBO of the screen.(Change for ur requirement).
    6.
    The following code should be written under PROCESS BEFORE EVENT in the MODULE.
    TYPE-POOLS :vrm.
    DATA:
      i_natio TYPE vrm_values, "-->Table that is passed through FM vrm_set_values
      w_natio LIKE LINE OF i_natio.
    DATA:
    BEGIN OF i_t005t OCCURS 0,
        land1 TYPE t005t-land1,
        natio TYPE t005t-natio,
    END OF i_t005t.
    IF i_t005t[] IS INITIAL.
      SELECT land1 natio
         FROM t005t
           INTO TABLE i_t005t
       WHERE spras = sy-langu.
      IF sy-subrc = 0.
      LOOP AT i_t005t .
          w_natio-key = i_t005t-land1.
          w_natio-text = i_t005t-natio.
          APPEND w_natio TO i_natio.
          CLEAR w_natio.
      ENDLOOP.
      ENDIF.
    ENDIF.
    CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
                          id = 'I_IT0002-NATIO' "-->Field for which dropdown is needed.
                    values = i_natio
    EXCEPTIONS
       id_illegal_name = 1
                OTHERS = 2.
    IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    * WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    2.1.How to create or display default date and time values?
    1.
    create input field for DATE and TIME on screen.ex. DATE1 and TIME1 are screen field names .
    2.
    Just assign SY-DATUM to DATE1 and SY-UZEIT to TIME1 under PROCESS BEFORE EVENT.
    3.How to create text box for giving comments?
    1.
    Define one variable in the TOP include with type STRING means Global variable.
    2.
    Create one input field by giving screen field name which u have defined in the above step.
    4.How to store the records that we are entering in a table?
    For this case.. Create one table control. you can select one record and create record in the Z table by pressing button on Application toolbar..
    Check the following steps to handle Table control.
    1).
    U should take one variable in your internal table or in structure which
    is used for table control fields
    ex :
    data :
    begin of itab occurs 0 ,
        mark type c , "This is to select the record.
        matnr like mara-matnr ,
        matkl like mara-matkl,
        maktx like makt-maktx,
    end of itab .
    Controls: TABC types TABLEVIEW using screen 100.
    2).
    This mark variable should be given in Table control properties.
    follow the path
    double click on the table control-->attributes .->select
    w/SelColumn and in that itab-mark. Check in the figure.
    [Table control properties screen|http://bp2.blogger.com/_O5f8iAlgdNQ/R99gOUH8CXI/AAAAAAAAA9I/d3gOum1fJ6s/s1600-h/pic28145-796618.jpg]
    3).
    After that. Take this example.
    PROCESS BEFORE OUTPUT.
    MODULE STATUS_0100.
    LOOP AT ITAB WITH CONTROL tabc
    ENDLOOP.
    PROCESS AFTER INPUT.
    MODULE CANCEL AT EXIT-COMMAND.
    LOOP AT ITAB.
       Module read_table_control.
    ENDLOOP.
    module user_command_0100.
    In this Module read_table_control, You should write the following code
    MODULE read_table_control INPUT.
    MODIFY itab INDEX tabc-current_line."( This will update the
    "ITAB table MARK field with 'X ' whatever we have selected
    "on table control.)
    ENDMODULE.
    4)
    If you want to Delete some of the records from Table control
    follow this code …Create one pushbutton and give Fucnction code to that
    and write below code
    CASE OKCODE.
    WHEN 'CREATE'.
    LOOP AT itab WHERE mark = 'X'.
    "Use UPDATE statement to create new record.
    ENDLOOP.
    ENDCASE.
    I hope that you will get something.
    Regards,
    Venkat.O

  • How to create custom infotype for training and event management

    hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
    PS No – PA0000-> PERNR
    Name   - PA0001 -> ENAME
    IS PS.No. – PA0001-> PS no. of Immediate Superior
    IS name PA0001 -> ENAME
    thanx in advance
    afzal

    Hi,
    Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
    If you wish to create a PD infotype, use transaction PPCI to create the infotype.
    But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
    If you wish to create a PA infotype, use transaction PM01 to create the infotype.
    But before that you may be required to create a strcuture PSnnnn  (where nnnn is the infotype number) with all the fields relevant for the infotype.
    Regards,
    Srini

  • How to Create a Page LOV Template and a Region LOV Report Template in APEX

    Hi All,
    Thanks in advance ..
    I am new to APEX , Currently working in APEX 3.2
    Can any one please guide me How to Create a Page LOV Template and a Region LOV Report Template in APEX
    So that I can create dynamic Multi column LOV in APEX
    Cheers
    Sachin

    Sachin,
    I think you are en-quiring about 'Custom pop-up page'. See this link. You will get all required info there.
    Regards,
    Hari

  • How to create the folder in presentation server through pop-up(

    Hi Experts,
    Can u give me the solution , how to create the folder in presentation server through pop-up(means dynamically, after executing the program , pop-up has to come to create the folderand path)
    regards
    ram.

    Use the methods -> DIRECTORY_BROWSE & DIRECTORY_CREATE of the class CL_GUI_FRONTEND_SERVICES
    DATA: path TYPE string,
          rc TYPE i,
    dir_name TYPE string value 'HI'.
      CALL METHOD CL_GUI_FRONTEND_SERVICES=>DIRECTORY_BROWSE
        CHANGING
          SELECTED_FOLDER      = path
      IF SY-SUBRC <> 0.
    *   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    concatenate path '\' dir_name into path.
      CALL METHOD CL_GUI_FRONTEND_SERVICES=>DIRECTORY_CREATE
        EXPORTING
          DIRECTORY                = path
        CHANGING
          RC                       = rc
      IF SY-SUBRC <> 0.
    *   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Edited by: Kartik Tarla on Sep 23, 2009 5:54 PM

  • How to create xml file from Oracle and sending the same xml file to an url

    How to create xml file from Oracle and sending the same xml file to an url

    SQL/XML (XMLElement, XMLForest, XMLAgg, etc) and UTL_HTTP.
    Whether that works for you with the version of Oracle you have, your requirements, and needs is another story. A little detail goes a long way.

  • How to create a gui pf status and guititle in module pool programming?

    hi frnds,
    how to create a gui pf status and gui title in module pool programming?
    my problem is i created a screen and wen execute the screen by a tcode.am nt able to activate SAVE BACK EXIT CANCEL COMMANDS?.how to do this can any one explain in detail procedure?
    plz gve step by step process.

    Hi,
    For Title:In PBO...just write
    SET TITLEBAR 'ZTITLE'.
    double click on 'ZTITLE'....give whatever title u want...save it...activate...and check...reward points if useful...
    PF means FUNCTION CODE
    ex; set pf-status 'zrstatus'.
    double click on the zrstatus expand the application server ,
    at the time of execution the default menu(ie system,help),application toolbar buttons like enter,help etc and function keys(by default there will be no function keys)as are there on the normal
    will appear on the screen.
    Details:
    PF-STATUS is used to set the GUI Status of a screen, ie you can control the options on your menu bar, application toolbar, the function keys assigned to various options etc.
    Implementing the status for a screen can be done in 2 ways:
    1) Create the GUI status using the object list of the program or by using the transaction SE41. Then, assign it to the screen using SET PF-STATUS statement.
    2) Create the GUI status by means of forward navigation, ie, use the SET PF-STATUS 'XXX' statement where 'XXX' is the name of the GUI status and double click on it to create it.
    Status names can have a maximum of 20 characters.
    After assigning a GUI status to a screen, this is inherited to all subsequent screens. In order to have a different status for each of the subsequent screens, you have to set a separate status for each screen.
    In transaction SE41,
    1) Give the program name and the status name and click on the Create button.
    2) Go to 'Function keys' and expand.
    3) On top of the save icon type SAVE, on top of the back icon type BACK, on top the the exit icon type EXIT etc ie on top of all the icons that you want to use, type the respective names that you want to give.
    Whatever you have typed now becomes the function codes of these icons and can be used in your program.
    For example you have a screen 100.
    In the 'Element list' tab of the screen, give "ok_code" as the name where "OK" is the type of screen element. Activate screen.
    The flow logic for the screen looks like this:
    PROCESS BEFORE OUTPUT.
    MODULE STATUS_0100.
    PROCESS AFTER INPUT.
    MODULE USER_COMMAND_0100.
    Create the modules STATUS_0100 and USER_COMMAND_0100 in the main program by simply double clicking on them.
    The code for these modules can be something like this:
    MODULE status_0100 OUTPUT.
    SET PF-STATUS 'Example'. "Example is the name of the GUI status
    ENDMODULE.
    MODULE user_command_0100 INPUT.
    CASE ok_code.
    WHEN 'SAVE'.
    "call a subroutine to save the data or give statements to save data.
    WHEN 'BACK'.
    LEAVE TO SCREEN 0.
    WHEN 'EXIT'.
    LEAVE PROGRAM.
    ENDCASE.
    ENDMODULE.
    Regards,
    Shiva Kumar (Reward If helpful)

  • How to create a Templates for Categories and Products In BCC

    Hi All,
    Could you please tell me How to create a Templates for Categories and Products In BCC and how Can I get those Templates details(Categories and Products)in jsp
    If possible can any one send the document or where we find in atg docs
    Regards,

    At product/category/sku level there is a property called template.
    Find the property in ACC/BCC and provide all the values including the URL property.
    In you jsp, you can use this property from product/sku like the way you retrieve any other property from sku/product.
    <dsp:valueof param="product.template.URL" />
    Using that property with <dsp:include> includes that page.
    Peace
    Shaik

Maybe you are looking for