How to create an unofficial repo [solved]

I know this must have been asked and answered 10 or 20 times over but I'll be damned if I can find it either here or in the wiki. Is there a forum post or wiki article that describes how to setup an unofficial repo on a web server?
Last edited by graysky (2011-01-13 22:14:06)

Essentially it is the same as creating any web server then:
repo-add <repo>.db.tar.gz <pkg file>

Similar Messages

How to create a runtime repos in 10gR2

Can anyone guide me through creating a runtime repository, access user and target schema(s)?
We have a DESIGN REPOS, but would also like a repos on the target database for deploying to.
I believe that there is no longer a RUNTIME ASSISTANT from release 2 onwards.

Quotation from OWB installation and administration guide ("server component" marked with bold by me):
"The Control Center Service is the Warehouse Builder server component that governs the deployment of objects to target schemas. Most commonly, as shown in Figure 1-2, the Control Center Service can be installed on the machines hosting the target schemas."
It seems that writers forget about running of objects (control center is needed for running mappings and process flows). So I highly recommend you to install OWB software on server. BUT you don't need install OWB on ALL your servers, because OWB support remote runtime environment (but I have never used it):
http://download.oracle.com/docs/cd/B31080_01/doc/install.102/b28224/install_rep02.htm#BABJDHCJ
Oleg

How to create a sub

Dear sir,
i new for labview how to create a sub vi
Solved!
Go to Solution.

nara2812 wrote:
Dear sir,
i new for labview how to create a sub vi
Here are some other tutorials you might want to look at
3 Hour Introduction
6 Hour Introduction
LabVEW Basics
Self Paced training for students
Self Paced training beginner to advanced, SSP Required
LabVIEW Wiki on Training
Learning NI
Getting Started with NI Products
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How to create solved fact table and corresponding cube

Hello,
I want to create cube with solved fact table. It means, i need to feed data for higher levels of dimension also from fact table instead of aggreting from base level.
I am using star schema and AWM 10g R2 for creating cube.
If anyone knows how to do this, i would be very benificial.
Thanks
Subash

I have generated parent child script using cwm2_olap_pc_transform.create_script. After running this generated script, it has created 3 table/view.
My Base Parent Child table is like this:-
drop table PARENT_CHILD;
create table PARENT_CHILD (PARENT varchar2(30), CHILD varchar2(30));
insert into PARENT_CHILD values ('Eligible', 'Compliant');
insert into PARENT_CHILD values ('Eligible', 'Non-Compliant');
insert into PARENT_CHILD values ('All', 'Eligible');
insert into PARENT_CHILD values ('All', 'Ineligible');
insert into PARENT_CHILD values (null, 'All');
After running generated script thru cwm2_olap_pc_transform.create_script, it has created :-
Table - PARENT_CHILD_SOLVED
View - PARENT_CHILD_SOLVED_view , PARENT_CHILD_view
This script also inserted data in above table/view. (5 rec in each). Table/View structure is like this:-
SQL> desc PARENT_CHILD_view
Name Null? Type
GID NUMBER
CHILD1 VARCHAR2(30)
CHILD2 VARCHAR2(30)
CHILD3 VARCHAR2(30)
Data:-
0 All Eligible Compliant
0 All Eligible Non-Compliant
1 All Eligible
1 All Ineligible
3 All
SQL> desc PARENT_CHILD_SOLVED
Name Null? Type
GID NUMBER
CHILD1 VARCHAR2(30)
CHILD2 VARCHAR2(30)
CHILD3 VARCHAR2(30)
Data:-
0 All Eligible Compliant
0 All Eligible Non-Compliant
1 All Eligible
1 All Ineligible
3 All
SQL> desc PARENT_CHILD_SOLVED_view
Name Null? Type
GID NUMBER
SHORT_DESCRIPTION VARCHAR2(30)
LONG_DESCRIPTION VARCHAR2(30)
CHILD1 VARCHAR2(30)
CHILD2 VARCHAR2(30)
CHILD3 VARCHAR2(30)
Data:-
0 Compliant Compliant All Eligible Compliant
0 Non-Compliant Non-Compliant All Eligible Non-Compliant
1 Eligible Eligible All Eligible
1 Ineligible Ineligible All Ineligible
3 All All All
I tried to create dim and cube based on this. I am not sure whether its correct or not! Though validate_dimension API call shows that it is valid.
Script for Dim:-
DECLARE
-- variable to hold error message
errtxt varchar(60);
BEGIN
-- To be on safer side just drop dimension before creating new one and catch exceptions
BEGIN
cwm2_olap_dimension.drop_dimension('APPS', 'HCP_DIM_PC');
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line('Dimension HCP_DIM_PC not dropped');
END;
cwm2_olap_dimension.create_dimension(
'APPS',
'HCP_DIM_PC',
'Parent Child',
NULL,
'Parent Child',
'Parent Child',
NULL);
cwm2_olap_dimension_attribute.create_dimension_attribute(
'APPS',
'HCP_DIM_PC',
'Short Description',
'Short Description',
'Short Description',
'Short Description',
TRUE);
cwm2_olap_dimension_attribute.create_dimension_attribute(
'APPS',
'HCP_DIM_PC',
'Long Description',
'Long Description',
'Long Description',
'Long Description',
TRUE);
cwm2_olap_dimension_attribute.create_dimension_attribute(
'APPS',
'HCP_DIM_PC',
'Grouping ID',
'Grouping ID',
'Grouping ID',
'Grouping ID',
TRUE);
cwm2_olap_hierarchy.create_hierarchy(
'APPS',
'HCP_DIM_PC',
'HCP_DIM_PC_HIER',
'Standard',
'Standard',
'Standard Parent Child Hierarchy',
'SOLVED LEVEL-BASED');
cwm2_olap_dimension.SET_DEFAULT_DISPLAY_HIERARCHY ('APPS', 'HCP_DIM_PC', 'HCP_DIM_PC_HIER');
cwm2_olap_level.create_level(
'APPS',
'HCP_DIM_PC',
'ALL_PARENT_LVL',
'All Parent Child',
'All Parent Child',
'All Parent Child',
'All Parent Child Level');
cwm2_olap_level_attribute.create_level_attribute(
'APPS',
'HCP_DIM_PC',
'Short Description',
'ALL_PARENT_LVL',
'Short Description',
'Short Description',
'Short Description',
'Short Description',
TRUE);
cwm2_olap_level_attribute.create_level_attribute(
'APPS',
'HCP_DIM_PC',
'Long Description',
'ALL_PARENT_LVL',
'Long Description',
'Long Description',
'Long Description',
'Long Description',
TRUE);
cwm2_olap_level_attribute.create_level_attribute(
'APPS',
'HCP_DIM_PC',
'Grouping ID',
'ALL_PARENT_LVL',
'Grouping ID',
'Grouping ID',
'Grouping ID',
'HTB Grouping ID',
TRUE);
-- Add all levels one by one to dimension hierarchy. For top most level last parameter is null.
cwm2_olap_level.add_level_to_hierarchy(
'APPS',
'HCP_DIM_PC',
'HCP_DIM_PC_HIER',
'ALL_PARENT_LVL',
NULL);
BEGIN
cwm2_olap_table_map.removemap_dimtbl_hierlevel(
'APPS',
'HCP_DIM_PC',
'HCP_DIM_PC_HIER',
'ALL_PARENT_LVL');
cwm2_olap_table_map.removemap_DimTbl_HierLevelAttr(
'APPS', 'HCP_DIM_PC', 'Short Description', 'HCP_DIM_PC_HIER', 'ALL_PARENT_LVL', 'Short Description');
cwm2_olap_table_map.removemap_DimTbl_HierLevelAttr(
'APPS', 'HCP_DIM_PC', 'Long Description', 'HCP_DIM_PC_HIER', 'ALL_PARENT_LVL', 'Long Description');
cwm2_olap_table_map.removemap_DimTbl_HierLevelAttr(
'APPS', 'HCP_DIM_PC', 'Grouping ID', 'HCP_DIM_PC_HIER', 'ALL_PARENT_LVL', 'Grouping ID');
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line('Level map for ALL_PARENT_LVL not removed');
END;
-- Map ALL_PARENT_LVL level to dimension table. Last parameter is null since it is top most level
cwm2_olap_table_map.map_dimtbl_hierlevel(
'APPS',
'HCP_DIM_PC',
'HCP_DIM_PC_HIER',
'ALL_PARENT_LVL',
'APPS',
'PARENT_CHILD_SOLVED_VIEW',
'GID',
NULL);
-- one by one map all the level attributes to respective columns in the dimension table.
cwm2_olap_table_map.Map_DimTbl_HierLevelAttr(
'APPS',
'HCP_DIM_PC',
'Short Description',
'HCP_DIM_PC_HIER',
'ALL_PARENT_LVL',
'Short Description',
'APPS',
'PARENT_CHILD_SOLVED_VIEW',
'SHORT_DESCRIPTION');
cwm2_olap_table_map.Map_DimTbl_HierLevelAttr(
'APPS',
'HCP_DIM_PC',
'Long Description',
'HCP_DIM_PC_HIER',
'ALL_PARENT_LVL',
'Long Description',
'APPS',
'PARENT_CHILD_SOLVED_VIEW',
'LONG_DESCRIPTION');
cwm2_olap_table_map.Map_DimTbl_HierLevelAttr(
'APPS',
'HCP_DIM_PC',
'Grouping ID',
'HCP_DIM_PC_HIER',
'ALL_PARENT_LVL',
'Grouping ID',
'APPS',
'PARENT_CHILD_SOLVED_VIEW',
'GID');
-- Use cwm2_olap_validate.validate_dimension to validate the dimension
cwm2_olap_validate.validate_dimension('APPS', 'HCP_DIM_PC');
cwm2_olap_metadata_refresh.mr_refresh;
-- Rollback if any exception occurs during processing this script
EXCEPTION
WHEN OTHERS THEN
cwm_utility.dump_error;
errtxt := cwm_utility.get_last_error_description;
dbms_output.put_line('ERROR: ' || errtxt);
ROLLBACK;
RAISE;
END;
Script for Cube:-
declare
HCP_time_dim number;
errtxt varchar(60);
begin
cwm_utility.collect_garbage;
begin
cwm2_olap_cube.drop_cube('APPS', 'HCP_PC_CUBE');
exception
when others then
dbms_output.put_line('No HCP_PC_CUBE to drop');
end;
begin
cwm2_olap_catalog.drop_catalog('HCP_PC_CAT');
exception
when others then
dbms_output.put_line('No HCP_PC_CAT to drop');
end;
CWM2_OLAP_CUBE.Create_Cube('APPS', 'HCP_PC_CUBE', 'Parent Child Cube', 'Parent Child Cube','Parent Child Cube');
cwm2_olap_cube.add_dimension_to_cube('APPS', 'HCP_PC_CUBE','APPS', 'HCP_DIM_PC');
cwm2_olap_measure.create_measure('APPS', 'HCP_PC_CUBE', 'HCP_PC_MEASURE', 'PC Measure','PC Measure', 'PC Measure Fact');
cwm2_olap_table_map.map_facttbl_levelkey('APPS','HCP_PC_CUBE','APPS','HCP_PC_FACT','ET', 'DIM:APPS.HCP_DIM_PC/HIER:HCP_DIM_PC_HIER/GID:GID/LVL:ALL_PARENT_LVL/COL:CHILD3;');
cwm2_olap_table_map.Map_FactTbl_Measure('APPS', 'HCP_PC_CUBE','HCP_PC_MEASURE', 'APPS', 'HCP_PC_FACT', 'MEASURE_COL', 'DIM:APPS.HCP_DIM_PC/HIER:HCP_DIM_PC_HIER/GID:GID/LVL:CHILD3/COL:SHORT_DESCRIPTION;');
cwm2_olap_catalog.create_catalog('HCP_PC_CAT', 'Parent Child Catalog');
cwm2_olap_catalog.add_catalog_entity('HCP_PC_CAT', 'APPS', 'HCP_PC_CUBE', 'HCP_PC_MEASURE');
cwm2_olap_validate.validate_cube('APPS', 'HCP_PC_CUBE','DEFAULT','YES');
cwm2_olap_metadata_refresh.mr_refresh;
exception
when others then
cwm_utility.dump_error;
errtxt := cwm_utility.get_last_error_description;
dbms_output.put_line('ERROR: ' || errtxt);
rollback;
raise;
END;
My Fact Table is :-
DROP TABLE HCP_PC_FACT CASCADE CONSTRAINT;
CREATE TABLE HCP_PC_FACT (
SHORT_DESCRIPTION VARCHAR2(30) NOT NULL,
GID NUMBER NOT NULL,
CHILD1 VARCHAR2(30) NOT NULL,
CHILD2 VARCHAR2(30) ,
CHILD3 VARCHAR2(30) ,
MEASURE_COL NUMBER NOT NULL);
Data in Fact Table:-
insert into HCP_PC_FACT values('Compliant',0,'All','Eligible','Compliant', 100);
insert into HCP_PC_FACT values('Non-Compliant',0,'All','Eligible','Non-Compliant', 200);
insert into HCP_PC_FACT values('Eligible',1,'All','Eligible',null, 300);
insert into HCP_PC_FACT values('Ineligible',1,'All','Ineligible',null, 400);
insert into HCP_PC_FACT values('All',3,'All',null,null, 500);
I am not sure how to create level, level attr, dim attr for such dim.
All CWM2 validation API shows that my all dims, cubes are valid but when I try to create presentation thru JDev it hangs after selecting Parent-Child Measure.
Any complete working exapmle will be helpful.
P.S. One more query I have can we have one solved and one un-solved dim in the same cube/measure?
regds
Prakash

How to Create a Link to a Discoverer Workbook in Apps11i?-[solved]

I tried to create a link to a disco workbook in apps 11i using metalink document 278095.1. It seems to be working ok for discoverer which is installed on the same machine as the apps11i is on(because when I clicked on the link which I have created in apps11i, I see a default disco4i welcome page which got installed out of the box with apps11i). But we are using discoverer version 10g which is on a different server. Does anyone has ideas on how to create a link for a disco workbook which is on a different server other than apps11i.
Discoverer version is 10g
Apps version is 11.5.10.2
Thanks in advance

hi Rod,
I did as you said and it seems to be connecting to the right server. But I have one more problem. In metalink document it says I have to enter the following in the Parameters text field of Function form in apps:
workbook=<(workbook identifier from step2) &PARAMETERS=param_parameter name One~Parameter One Value*param_parameter name Two~Parameter Two Value*
But I dont understand what should I have in place of param_parameter name One~Parameter One Value. Is it the name of the parameter given in discoverer, if so can you give me an example of how to write it. Because when I typed the name of the parameter like &PARAMETERS=Client Id, where client Id is the name of the parameter, it is giving me the following error
ORA-06502: PL/SQL: numeric or value error
Thanks for your help

[SOLVED] How to Create OGG Theora Video From an Audio Track + 1 image

Does anyone know how to create an OGG Theora video (.ogv) from an audio track and one still image. I just want one video frame to repeat until the audio file is finished playing. Make sense? Any help would be appreciated, and if possible I'd love to do it with ffmpeg2theora. Thanks!
Last edited by tony5429 (2009-11-30 03:14:54)

http://lists.mplayerhq.hu/pipermail/ffm … 19761.html
I've tested it w/ 'ffmpeg -loop_input -f image2 -i image.jpg -i sound.mp3 blah.avi' and the output works w/ mplayer but I had issues w/ .ogg and .ogv output.
In case vlc and gstreamer won't do, check out http://v2v.cc/~j/ffmpeg2theora/
Last edited by karol (2009-11-29 16:43:23)

How to create one checksum for 264 vis

Hi,
How to create "one Checksum" for 264 Vis.These 264 Vis are Interlinked if i change code for any .vi the checksum Should be update.This checksum is shown on the main window.
Regards
Ravindranath
Solved!
Go to Solution.

Here's a slightly simplified version (saved in 8.6). There's no need for the Get/Set File Position. The file position is already being incremented with the read.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Multiple File MD5 Checksum (Version 8.6).vi ‏23 KB

How to create a Custom List without the column "Title" ?

Maybe this one is easy as it sounds, I just want to know how to create a little list for my SharePoint application featuring 3 columns:
1 - User Name (this should be Person type - UNIQUE + Required)
2 - Report (Memo - Required)
3 - Status (Choice + Required)
The list will be used to allow the users to submit a weekly report and I don't want to include the title because there is no use to me, I know I can hide the column by customizing the list but this sounds very amateur even for a newbie like me (yeah... sounds
so cheap!), since I've been reading a lot about custom content types and I still didn't get the chance to use this properly I was wondering how I could put them to use and I guess the example here would be the best right?
I really spent some time trying but I always end getting the Title even when I try to use custom content types so I'm really giving up and asking for some help at this point.
Thanks a lot for the help!!!

Yes, you can do that. If you need a different content type with your custom fields. Following are the steps : http://www.dotnetcurry.com/ShowArticle.aspx?ID=620
After creating your custom Content Type, Click on the 'Title' filed in your custom content type.
In the 'Column Settings' make it 'Hidden (Will not appear in forms)' and click ok.
Now add this content type to your list/library.
In the list/Library go to setting and 'Advance settings' and make the 'Allow management of Content Type?' as 'yes' and click ok.
Now make default content type not visible from 'Change new button order and default content type' link in the settings page of list/library, and your contet type as 'Default'.
Create a new view, remove the 'Title' field and make that view as 'dafault' view, you can delete the 'All Items' view also if required.
Now whenever user come to that list/Library they will not see the title column and also will not appear in the 'New Item'.
Note : The 'Title' field is mandatory in all the list/library and by default added to the 'All Item' view. So, by doing above steps you are creating a new content type where 'Title' is not mandatory and also not added in default view.
get2pallav
Please click "Propose As Answer" if this post solves your problem or "Vote As Helpful" if this post has been useful to you.

How to create shipment document with out inbound delivery document

Dear Friends
How to create shipment document with out outbound/inbound delivery document.
In my client scenario, there is no inbound delivery for normal purchases.
Just there are raising the PO to vendor, then they are doing MIGO for goods receipt.
Can we do shipment creation with reference to PO?
If it is possible, how it will be?
Please let it solve
With regards
Lakshmikanth

Dear Sameer,
Please go to transaction VT01N here you enter Transportation planning point and shipment type then press enter.
Now system will take you to the shipment document creation screen here you click on Select deliveries or press F6 now system will take you to the select outbound deliveries screen in this screen you enter selection data then execute, now deliveries will get assigned to that shipment.
After assigning the deliveries enter the remaining data then complete the shipment finally save the shipment document.
For more information please go through this SAP help link
Note:- Shipment process need to be carry out for the deliveries before PGI.
http://help.sap.com/saphelp_47x200/helpdata/en/f5/04898047bd11d2bf750000e8a7386f/frameset.htm
I hope this will help you,
Regards,
Murali.

How to create a muse site in various languages with multiple domains

I have been asked to create a website for a product. A very simple website with maybe one or two pages and one product for sale for which the client would like Paypal as the payment gateway. Simple right?
No! This client would like to market their product into Europe, they would like to purchase multiple European domains ( .fr, .de for example).
So how on earth can I do this? I will be using Muse for build and Business Catalyst for hosting.
Bearing in mind the client will not want to pay for separately hosted sites. Is there a way of translating the text for each domain. Or could I assign multiple domains but direct them to different home pages within the same site?
I haven’t a clue how to problem solve this.

Hi,
Some links that might be useful,
how to set up a multilingual website with Adobe Muse and push it live to Adobe Business Catalyst
Re: How can i create different languages for my page?
How can i create a multilingual website?
how to create a multilingual site
Do let me know if you have any question.

How to create a new connection from SAPGUI to Test drive?

Hi,
I have installed Sap Netweaver Test drive on a linux virtual machine (windows host). The installation was successful and I was able to start the instance (application server and the database), yet I don't know how to create a new connection from my SAPGUI client (7.20) to this server. The static IP address of the server is 192.168.1.160.
I entered the following values for my new connection entry
Description: SAP Netweaver
Application server: 192.168.1.160
Instance number: 01
System ID: DB2
SAProuter: /H/192.168.1.160/S/3201/H/
But it does not work. Any idea about the values needed for creating a new entry?
Thanks in advance,
Dariyoosh

>
Dibya R Das wrote:
> Why are you entering a router string? Can't you reach a box directly from your machine?
>
> Doesn't a ping to that host & a "telnet <host/ip address> 3201" work from your machine to the SAP System.
>
> Remove the router string you wont need if the above works.
>
> - Regards, Dibya
Hello there,
Thank you very much for your answer which solved my problem. In fact there was no need of providing router string.
Kind Regards,
Dariyoosh

How to create one GR document for mutiple Purchase orders

Can you please explain me in SAP - How to create one Goods Receipt document for reference of Multiple purchase orders.

Dear Tanuj,
Both Rama & Stephen are correct.
You can take Single GR for Multiple PO either in MIGO or MB01 as long as that POs belongs to same vendor.
In MIGO, after putting the PO press,enter, again give the next PO of that vendor .
If this solve your problem, close the issue.
With Regars,
Krishna Reddy

Verizon Blackberry Internet Service Client (BIS)- How to create an e-mail Filter

Hello. Thank you in advance for replying to my question. I am trying to create an e-mail filter so that a contact's e-mail messages do not get delivered to my BB and instead just go straight to my regular e-mail account. I understand that you can do this function from the BIS, however when I tried to create an account I received a message that said "please use your device to access the BIS." I did just as the message told me but I did not get the same menu options from my BB as I would have gotten from doing it from the internet. The page only showed a list of my e-mails and an "edit" and "delete" choice for each one. There was no "Filter" button for me to click. I remember a while ago I able to access this page and was able to remove the BB signature (i.e.. "This message is being sent from a BB"), so I know that it was possible to access this page. I do not know why I am not able to accesses it now.
If anyone out there has Verizon and knows how to access the BIS, please let me know how. Or if you know how to create an e-mail filter function, please let me know.
Thank you,
Fred
Solved!
Go to Solution.

Hi there!
To log into your BIS account from a PC/browser (not the BB browser), go to this URL:
https://bis.na.blackberry.com/html?brand=vzw
Enter your BIS credentials and you will then be in your BIS account screen. From there, use this KB to create the filter you desire:
KB04558 Add a filter to a BlackBerry Internet Service account
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

HOW TO CREATE 2 PARAMETER IN SINGLE LINE.

Please do NOT POST IN ALL CAPITALS
HI,
HOW TO CREATE TWO PARAMETERS IN A SINGLE LINE AND THE INPUT HAS TO BE DISPLAYED IT IN A POP UP BOX. THIS IS MY TRAINING TASK HELP ME TO SOLVE IT.
REGARDS,
SREERAM
Edited by: Matt on Mar 19, 2009 1:26 PM

hi,
SELECTION-SCREEN BEGIN OF BLOCK b1.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(10) text-001.
PARAMETERS:
p_carrid TYPE spfli-carrid.
SELECTION-SCREEN COMMENT 30(10) text-002.
Parameter p_connid TYPE spfli-connid.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b1.
Radio buttons in a single line.
SELECTION-SCREEN BEGIN OF BLOCK b1.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(10) text-001.
PARAMETERS p_rad RADIOBUTTON GROUP grp.
SELECTION-SCREEN COMMENT 30(10) text-002.
Parameter p_rad1 RADIOBUTTON GROUP grp.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b1
Thanks
Sharath

How to create a group of cost element

Hi,
i want to integrate a group of cost element in KP06, but i don't know how to create it.
please what is the transaction to do that ?
Regards.

Hello,
To create the Group of Cost Element
Go to transection code KAH1 Give any name or number to your cost element group then make the proper standerd hirerchey as you need or simply click on the cost elemt and add all cost element which you want to make a group.
Hope it will solve you probem,
Regards
Ravi

How to create an unofficial repo [solved]

Similar Messages

Maybe you are looking for