How to create bdc for fbs1 using both call transaction and session
Hi Friends,
i have one problem with tcode FBS1, i need to create a bdc program for both call transaction and session method using subroutine.
first call transaction needs to execute if there is an error sesion has to execute. if u have code please forward.
thanks in advance.
chandramouli pothugunta
where as in call transaction we can do error handling explictly.those errors are stored in one file .this file will send to the error log(session method),i.e session log.
in the above case we use both call transaction n session method at time in one program.sample code is below ,go through it .
data : begin of itxk01 occurs 0,
end of itxk01.
data : bdcdata like itbdcdata occurs 0 with header line.
data : itbdcmsgcoll like itbdcmsgcoll occurs 0 with header line,
itxk01 like itxk01-dup occurs 0 with header line.
call gui-upload.
loop at itxk01.
refresh itxk01.
perform bdc-dynpr0 using 'prg' 'scr'
perform bdc-dynfld using fnam fval
call transaction 'xk01' using bdcdata mode 'a' update 's' messages into itbdcmsgcoll.
if sy-subrc ne 0.
append itxk01 into itxk01-dup.
endif.
endloop.
if not itxk01-dup[] is initial.
refresh itck01.
call bdc_open_group
itxk01 = itxk01-dup.
loop at itxk01.
refresh itxk01.
perform bdc-dynpr0 using 'prg' 'scr'
perform bdc-dynfld using fnam fval
call bdc-insert.
endloop.
call bdc-close-group.
form bdc-dynpr0 using pr sc
endform .
form bdc-field using fnam faval
endform.
this will help u.
reward points for me
kiran
Similar Messages
-
I want to use both call transaction and session method in the same
Hi,
1. I want to use call transaction and session method in a single trans..how to do?
2. I have 1000 records in it 500 records is updated using call transaction remaining 500 i hve to update with session how to do?
3. Multiple transaction is possible in call transaction how?I suggest you try fulfilling your requirements yourself and come back with specific problems along the way.
-
When we go for lsmw apart from call transaction and session method in bdc?
Hi Experts,
Hi,
Mostly LSMW is used where small data migartion is needed, wwhere as BDC for huge data migration.
LSMW is sometimes used by functional consulatants as they dont have any programming knowledge .
Revert back if any issues.
Reward with points if helpful.
Regards,
Naveen -
Can we hav call transaction and session method for an application
can we hav call transaction and session method for an application ?if yes how?
Hi ,
You can. If Call Transaction fails, a batch input session can be created.
Check this example-
Call the transaction. Messages from Call Transaction are stored in the
internal table messtab
CALL TRANSACTION 'LT01' USING bdc_tab MODE 'N' UPDATE 'S'
MESSAGES INTO messtab.
IF sy-subrc = 0.
Call transaction successfull, get the number of the Transfer Order that
was created
LOOP AT messtab.
IF messtab-dynumb = '0104' AND messtab-msgnr = '016'.
w_transportorderno = messtab-msgv1.
ENDIF.
ENDLOOP.
ELSE.
Call transaction failed, create a batch input session instead.
PERFORM open_group.
PERFORM bdc_insert USING 'LT01'.
PERFORM close_group.
ENDIF.
Regards,
Sookshma -
Bdc(call transaction and session method)
hi experts,
i want to write for bdc program in which i have used call transaction and session method.please help me.
thank you
with regards,
santoshHi,
See the Sample BDc Code for Vendor Master Upload:
Look at the Include BDCRECX1 for Seesion and Call Transaction types:
REPORT zmm_vendor_master_upload
NO STANDARD PAGE HEADING
LINE-SIZE 255.
ABAP Name : ZMM_VENDOR_MASTER_UPLOAD
Description : This Program is used to Upload the Vendor Master.
Modification Log:
Date Programmer Correction Description
Standard Include for Selection Screen
INCLUDE bdcrecx1.
Internal Table for Upload Data
DATA: BEGIN OF i_vendor OCCURS 0,
bukrs(004), " Company Code
ekorg(004), " Purchase Orgn
ktokk(004), " Account Group
Address Screen
anred(015), " Title
name1(035), " Name1
sortl(010), " Sort Field
name2(035), " Name2
name3(035), " Contact Person1
name4(035), " Contact Person 2
stras(035), " Street
pfach(010), " PO Box
ort01(035), " City
pstlz(010), " Postal Code
land1(003), " Country
spras(002), " Language
telf1(016), " Telephone No
telfx(031), " Fax Number
lfurl(132), " URL-Mail Id
Material Group Characteristics
klart(003), " Class Type '010'
class(018), " Class 'Vendor'
mname_01(030), " Characteristic
mname_02(030), " Characteristic
mname_03(030), " Characteristic
mwert_01(030), " Charct.Value
mwert_02(030), " Charct.Value
mwert_03(030), " Charct.Value
Control Data
emnfr(010), " Manufact.Part No
Bank Details
banks_01(003), " Country of Bank1
banks_02(003), " Country of Bank2
bankl_01(015), " Bank Key of 1
bankl_02(015), " Bank Key of 2
bankn_01(018), " Account No Bank1
bankn_02(018), " Account No Bank2
Accounting Info
akont(010), " Reconcillation Account
zuawa(003), " Sort Key
fdgrv(010), " Cash Management Group
Payment Transactions
zterm(004), " Payment terms
reprf(001), " Check Double Inv.
zwels(010), " Payment Method
hbkid(005), " House Bank
xpore(001), " Individ.Payment
Correspondence
mahns(001), " Dunning Level
xausz(001), " Account Statement
Withholding Tax Details
qland(003), " Withholding Tax Country
witht_01(002), " WH tax Type
wt_withcd(002), " WH Tax Code
wt_subjct(001), " Indicator:WH Tax
Purchasing Data
waers(005), " Currency
zterm1(004), " Payment Terms
END OF i_vendor.
Data Variables & Constants
CONSTANTS : c_x VALUE 'X'. " Flag
Paramters
PARAMETERS: p_file LIKE ibipparms-path. " Filename
At selection-screen on Value Request for file Name
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
Get the F4 Values for the File
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file.
Start of Selection
START-OF-SELECTION.
Open the BDC Session
PERFORM open_group.
Upload the File into internal Table
CALL FUNCTION 'UPLOAD'
EXPORTING
filename = p_file
filetype = 'DAT'
TABLES
data_tab = i_vendor
EXCEPTIONS
conversion_error = 1
invalid_table_width = 2
invalid_type = 3
no_batch = 4
unknown_error = 5
gui_refuse_filetransfer = 6
OTHERS = 7.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Upload the Data from Internal Table
LOOP AT i_vendor.
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-BUKRS'
i_vendor-bukrs.
PERFORM bdc_field USING 'RF02K-EKORG'
i_vendor-ekorg.
PERFORM bdc_field USING 'RF02K-KTOKK'
i_vendor-ktokk.
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-SPRAS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=KLAS'.
PERFORM bdc_field USING 'LFA1-ANRED'
i_vendor-anred.
PERFORM bdc_field USING 'LFA1-NAME1'
i_vendor-name1.
PERFORM bdc_field USING 'LFA1-SORTL'
i_vendor-sortl.
PERFORM bdc_field USING 'LFA1-NAME2'
i_vendor-name2.
PERFORM bdc_field USING 'LFA1-NAME3'
i_vendor-name3.
PERFORM bdc_field USING 'LFA1-NAME4'
i_vendor-name4.
PERFORM bdc_field USING 'LFA1-STRAS'
i_vendor-stras.
PERFORM bdc_field USING 'LFA1-PFACH'
i_vendor-pfach.
PERFORM bdc_field USING 'LFA1-ORT01'
i_vendor-ort01.
PERFORM bdc_field USING 'LFA1-PSTLZ'
i_vendor-pstlz.
PERFORM bdc_field USING 'LFA1-LAND1'
i_vendor-land1.
PERFORM bdc_field USING 'LFA1-SPRAS'
i_vendor-spras.
PERFORM bdc_field USING 'LFA1-TELF1'
i_vendor-telf1.
PERFORM bdc_field USING 'LFA1-TELFX'
i_vendor-telfx.
PERFORM bdc_field USING 'LFA1-LFURL'
i_vendor-lfurl.
PERFORM bdc_dynpro USING 'SAPLCLCA' '0602'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RMCLF-KLART'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTE'.
PERFORM bdc_field USING 'RMCLF-KLART'
'010'. "i_vendor-klart.
PERFORM bdc_dynpro USING 'SAPLCLFM' '0500'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RMCLF-CLASS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=AUSW'.
PERFORM bdc_field USING 'RMCLF-CLASS(01)'
'Vendor'."i_vendor-class.
PERFORM bdc_dynpro USING 'SAPLCTMS' '0109'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RCTMS-MWERT(03)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BACK'.
PERFORM bdc_field USING 'RCTMS-MNAME(01)'
'MATERIALGROUP'." i_vendor-mname_01.
PERFORM bdc_field USING 'RCTMS-MNAME(02)'
'MATERIALGROUP'." i_vendor-mname_02.
PERFORM bdc_field USING 'RCTMS-MNAME(03)'
'MATERIALGROUP'." i_vendor-mname_03.
PERFORM bdc_field USING 'RCTMS-MWERT(01)'
i_vendor-mwert_01.
PERFORM bdc_field USING 'RCTMS-MWERT(02)'
i_vendor-mwert_02.
PERFORM bdc_field USING 'RCTMS-MWERT(03)'
i_vendor-mwert_03.
PERFORM bdc_dynpro USING 'SAPLCLFM' '0500'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RMCLF-CLASS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENDE'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-ANRED'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-EMNFR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_field USING 'LFA1-EMNFR'
i_vendor-emnfr.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(02)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_field USING 'LFBK-BANKS(01)'
i_vendor-banks_01.
PERFORM bdc_field USING 'LFBK-BANKS(02)'
i_vendor-banks_02.
PERFORM bdc_field USING 'LFBK-BANKL(01)'
i_vendor-bankl_01.
PERFORM bdc_field USING 'LFBK-BANKL(02)'
i_vendor-bankl_02.
PERFORM bdc_field USING 'LFBK-BANKN(01)'
i_vendor-bankn_01.
PERFORM bdc_field USING 'LFBK-BANKN(02)'
i_vendor-bankn_02.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-FDGRV'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_field USING 'LFB1-AKONT'
i_vendor-akont.
PERFORM bdc_field USING 'LFB1-ZUAWA'
i_vendor-zuawa.
PERFORM bdc_field USING 'LFB1-FDGRV'
i_vendor-fdgrv.
PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-XPORE'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_field USING 'LFB1-ZTERM'
i_vendor-zterm.
PERFORM bdc_field USING 'LFB1-REPRF'
c_x. "i_vendor-reprf.
PERFORM bdc_field USING 'LFB1-ZWELS'
i_vendor-zwels.
PERFORM bdc_field USING 'LFB1-HBKID'
i_vendor-hbkid.
PERFORM bdc_field USING 'LFB1-XPORE'
c_x. "i_vendor-xpore.
PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB5-MAHNS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_field USING 'LFB5-MAHNS'
i_vendor-mahns.
PERFORM bdc_field USING 'LFB1-XAUSZ'
i_vendor-xausz.
PERFORM bdc_dynpro USING 'SAPMF02K' '0610'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBW-WT_SUBJCT(01)'.
PERFORM bdc_field USING 'LFB1-QLAND'
i_vendor-qland.
PERFORM bdc_field USING 'LFBW-WITHT(01)'
i_vendor-witht_01.
PERFORM bdc_field USING 'LFBW-WT_WITHCD(01)'
i_vendor-wt_withcd.
PERFORM bdc_field USING 'LFBW-WT_SUBJCT(01)'
c_x.
PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFM1-ZTERM'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_field USING 'LFM1-WAERS'
i_vendor-waers.
PERFORM bdc_field USING 'LFM1-ZTERM'
i_vendor-zterm1.
PERFORM bdc_dynpro USING 'SAPMF02K' '0320'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-LIFNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_dynpro USING 'SAPLSPO1' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=YES'.
Call the Transaction
PERFORM bdc_transaction USING 'XK01'.
ENDLOOP.
Close the BDc Session
PERFORM close_group.
Regards,
Anji -
Can we use Call transaction and session method in same program ?
Hi experts,
Is it suggested to use call Transaction and session method in the same Program ?
i have a doubt , why cant we use multiple call transactions in same program instead of session method if we have multiple transaction updations ?Hi Dengyong Zhang,
we can use the call transation and session method in same program.
However for better performance it's benificial to use call trasaction method of BDC. but if u want to upload very large amount of data then Session method is more preferable to use.
Session method is one of the method of BDC.
U can also use BAPI to upload the data in SAP but it's a different concept than BDC. Performance wise BAPI is more advantageous than BDC. -
Regarding Call Transaction and Session Method in BDC.
Hi,
If there are 50 records and 25th row data is having error.
What will happen when we run it in Call Transaction and Session Method in both Foreground and Background methods ? Can anybody explain me in details ?Hi Naresh,
If you are using call transaction,
if executed in Foreground, 24 records will be posted and for 25th you will have option to correct data or skip.
if executed in background,
if mode is N, 24 records are processed 25th is skipped and 26th onwards is processed again.
if mode is E, 24 records will be posted and for 25th you will have option to correct data or skip.
For Session also it should be same the difference is that the error would be there in sessionlog and you can re-process it.
Hope it helps.
Regards,
Komal. -
What is difference bet call transaction and session method in BDC
hi
what is difference bet call transaction and session method in BDC
thanks.Hi,
Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
call Transaction or session method ?
Thanks,
Reward If Helpful. -
Decision between call transaction and session method:BDC
Hi,
Kindly guide how to take decision between call transaction and session method?
Thanks,
SanjayHello Sanjay,
here are some links which discuss the difference between them:
http://scn.sap.com/thread/721344
http://scn.sap.com/thread/166845
Best regards,
Laszlo -
How to create infopackage for Cube to Cune to transaction
HI Experts
I have performed following steps for cube to cube load.
1. Created source cube and loaded the data from R3
2. Created Destination cube
3. Generated Export Data source for the source cube. Here I'm able to see my datasource Icon(8ZFIGL_C01). When I double click on that it is give details.
4. Defined the update rules for Destiination cube by assiging the infosource (8ZFIGL_C01) which is created in step3.
5.Now I'm searching for the infosurce (8ZFIGL_C01) in data modelling -> infosource. its not showing up any name with 8ZFIGL_C01.
Kindly let me know how to create infopackage for this to laod the data from cube to cube.
Additional information:
I have set the optopn Display Generated Object in Settings.
Thanks in advance for your help.
Regards
NLNHi,
Right Click on "Infosource" (TA RSA12 Top at the Right side Panel) and choose Insert lost nodes and refresh the screen and now search for your infosource and you will find it.
See solution from SAT:
Problems with Infosource Data Marts
Best regards,
Frank -
How can I decide which one I use whethe Call Transaction or Session Method?
Hi ,
How can I decide Whether I have to use Call Transaction or Session? I know the differences and working procedure of them.
thanks in advance.HI.
check diff between both and choose ur requirement!!!
What is the difference between batch input and call transaction in BDC?
Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
Reward all helpfull answers.
Regards.
Jay -
Dif betwen BDC call transaction and session method
Hi to all,
This is my problem. I want to know, what is the difference between BDC call Transaction method and Session method. where the situation we can use these methods.
I will be thankfull to all.Session Method :
Asynchronous Processing.
Transfers Data for Multiple Transactions
Synchronous Database Update
During Processing, No Transaction is started until the previous transction has been written to the database.
A Batch Input Processing log is generated for each session
Sessions can not be generated in Parallel.
The Batch Input Porgram must not open a Session until it has closed the preceding Session.
Call Transaction :
Synchronous Processing.
Transfers Data for a single transaction.
Synchronous and Asynchronous Database updating both Possible.
The Program Specifies which kind of updating is desired.
Seperate LUW for the transaction.
The System Performs a database commit immediately before and after the CALL TRANSACTION Using Statement.
No Batch Input Processing Log is generated.
These are the differences between session and call transaction method.
Call transaction is faster then session method. But usually we use session method in real time...because we can transfer large amount of data from internal table to database and if any errors in a session. Process will not complete until session get correct. -
Hi all,
I am uploading 10 records in to sap . By using call transaction method . But after insertion of 5 record server suddenly shutdown. Then what happens . What we have to do
and what about the updated 5 recs as well as remaining 5 recs.
And if it happens in case of BDC-SESSION then what is the status what we have to do..
PLEZ GIVe reply soon...its urgent
regards,
anilreddy...Hi,
If you are using call transaction , you will not get error messages for balance 5 records that not updated. you need to cross check with the transaction and rerun again.
Session method is concerned no session will be created. system shutdown happened before the close_group,
a® -
About bdc call transaction and session method
hi,
can i know whether we could proceed with the bdc techniques without even copying and pasting in our program the perform statements from the recording process that we do for the particular transaction in TC SHDB.
if we can pls send me a code for example.
thanks in advancehi,
check this example.
For doing BDc Manually we have to analyse the transaction i.e. ex-XK01 we have to know the Screen numbers and screen fileds.
first analyse the transaction and then write performs for bdc_filed and bdc_dynpro.
REPORT ZSR_BDC_CT_ERROR.
DATA: BEGIN OF ITAB OCCURS 0,
LIFNR LIKE RF02K-LIFNR,
KTOKK LIKE RF02K-KTOKK,
NAME1 LIKE LFA1-NAME1,
SORTL LIKE LFA1-SORTL,
LAND1 LIKE LFA1-LAND1,
SPRAS LIKE LFA1-SPRAS,
END OF ITAB.
DATA : BDCTAB LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
it_error like itab occurs 0 with header line,
BDCMSG LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = 'z:\ct.txt'
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = ITAB
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT ITAB.
REFRESH BDCTAB.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0100'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'RF02K-LIFNR'
ITAB-LIFNR.
PERFORM BDC_FIELD USING 'RF02K-KTOKK'
ITAB-KTOKK.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0110'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFA1-SPRAS'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'LFA1-NAME1'
ITAB-NAME1.
PERFORM BDC_FIELD USING 'LFA1-SORTL'
ITAB-SORTL.
PERFORM BDC_FIELD USING 'LFA1-LAND1'
ITAB-LAND1.
PERFORM BDC_FIELD USING 'LFA1-SPRAS'
ITAB-SPRAS.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0120'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0130'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENTR'.
PERFORM BDC_DYNPRO USING 'SAPLSPO1' '0300'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=YES'.
CALL TRANSACTION 'XK01' USING BDCTAB MODE 'A' UPDATE 'A' MESSAGES INTO BDCMSG.
*LOOP AT BDCMSG.
if sy-subrc <> 0.
move-corresponding itab to it_error.
endif.
READ TABLE BDCMSG WITH KEY MSGTYP = 'E'.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = BDCMSG-MSGID
LANG = 'EN'
NO = BDCMSG-MSGNR
V1 = BDCMSG-MSGV1
V2 = BDCMSG-MSGV2
V3 = BDCMSG-MSGV3
V4 = BDCMSG-MSGV4
IMPORTING
MSG = BDCMSG-MSGV1
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
WRITE :/ BDCMSG-MSGNR,BDCMSG-MSGV1.
ENDLOOP.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE = BIN_FILESIZE
filename = 'z:\cerror.txt'
FILETYPE = 'ASC'
APPEND = ' '
WRITE_FIELD_SEPARATOR = 'X'
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
IMPORTING
FILELENGTH = FILELENGTH
TABLES
data_tab = it_error
FIELDNAMES = FIELDNAMES
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*& Form dynpro
FORM BDC_DYNPRO USING P_P1
P_P2.
CLEAR BDCTAB.
BDCTAB-PROGRAM = P_P1.
BDCTAB-DYNPRO = P_P2.
BDCTAB-DYNBEGIN = 'X'.
APPEND BDCTAB.
ENDFORM. " dynpro
*& Form bdc_field
text
-->P_P3 text
-->P_P4 text
FORM BDC_FIELD USING P_P3
P_P4.
CLEAR BDCTAB.
BDCTAB-FNAM = P_P3.
BDCTAB-FVAL = P_P4.
APPEND BDCTAB.
ENDFORM. " bdc_field
Session:
REPORT ZSR_BDC_SESSION.
DATA: BEGIN OF ITAB OCCURS 0,
LIFNR LIKE RF02K-LIFNR,
KTOKK LIKE RF02K-KTOKK,
NAME1 LIKE LFA1-NAME1,
SORTL LIKE LFA1-SORTL,
LAND1 LIKE LFA1-LAND1,
SPRAS LIKE LFA1-SPRAS,
END OF ITAB.
DATA : BDCTAB LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
BDCMSG LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
*include bdcrecx1.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = 'z:\flatfiles\sr1.txt'
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = ITAB
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*perform open_group.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
DEST = FILLER8
GROUP = 'SR'
HOLDDATE = FILLER8
KEEP = 'X'
USER = SY-UNAME
RECORD = FILLER1
PROG = SY-CPROG
IMPORTING
QID =
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT ITAB.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0100'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'RF02K-LIFNR'
ITAB-LIFNR.
PERFORM BDC_FIELD USING 'RF02K-KTOKK'
ITAB-KTOKK.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0110'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFA1-SPRAS'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'LFA1-NAME1'
ITAB-NAME1.
PERFORM BDC_FIELD USING 'LFA1-SORTL'
ITAB-SORTL.
PERFORM BDC_FIELD USING 'LFA1-LAND1'
ITAB-LAND1.
PERFORM BDC_FIELD USING 'LFA1-SPRAS'
ITAB-SPRAS.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0120'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0130'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENTR'.
PERFORM BDC_DYNPRO USING 'SAPLSPO1' '0300'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=YES'.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'XK01'
POST_LOCAL = NOVBLOCAL
PRINTING = NOPRINT
SIMUBATCH = ' '
CTUPARAMS = ' '
TABLES
DYNPROTAB = BDCTAB
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDLOOP.
*perform bdc_transaction using 'XK01'.
CALL FUNCTION 'BDC_CLOSE_GROUP'.
*perform close_group.
FORM BDC_DYNPRO USING VALUE(P_0069)
VALUE(P_0070).
CLEAR BDCTAB.
BDCTAB-PROGRAM = P_0069.
BDCTAB-DYNPRO = P_0070.
BDCTAB-DYNBEGIN = 'X'.
APPEND BDCTAB.
ENDFORM. " bdc_dynpro
*& Form bdc_field
FORM BDC_FIELD USING VALUE(P_0074)
VALUE(P_0075).
IF P_0075 IS NOT INITIAL.
CLEAR BDCTAB.
BDCTAB-FNAM = P_0074.
BDCTAB-FVAL = P_0075.
APPEND BDCTAB.
ENDIF.
ENDFORM. " bdc_field -
When we use call transaction and session method?
cud anyone tell me the exact difference between session and call transaction ? when we have to use ?
hi,
BATCH INPUT METHOD
Asynchronous processing
Transfer data for multiple transactions.
Synchronous database update.
A batch input process log is generated for each session.
Session cannot be generated in parallel.
CALL TRANSACTION METHOD:
Using CALL TRANSACTION USING statement
Faster processing of data
Synchronous processing
Transfer data for a single transaction.
No batch input processing log is generated.
Maybe you are looking for
-
why cant this reset?
-
Getting Error while doing Reverse Engineering Processes.
Hi all, I am new to ODI, i tried ODI with SAP ABAP, after i my all settings after doing reverse Engineer Processes, I cant able to see the Metadata browser while checking Log i am getting the below given error. ODI-1217: Session Sap ERP Source (27001
-
How to work with xml in java ?
Hello everybody. I am trying to read, write and modify xml file in java. But i don't know what is the best method for work with xml file ? Please give me some examples for read, write and modify it. Thanks in advance.
-
Two days ago I upgraded to 10.9.2. Ever since then I've been unable to name any newly created folders or change the names of any existing ones. I am logged in as the administrator.
-
HT204266 Security questions are not mine
Why do I do if I don't know the answer to my security questions?