How To Create Context Menu In Module Pool

Moderator message: do not offer points
hello guru's
Please help me regarding creation of context menu in MODULE POOL Programming.
pleaase send me link or procedure to create it.
<<text removed>>
waiting for reply
Edited by: Matt on Feb 20, 2009 3:13 PM

Do a search first:
[link1|context menus;
[link2|http://help.sap.com/saphelp_nw04/helpdata/en/e2/5d3bb2e06411d295a900a0c94260a5/frameset.htm]
etc. etc.

Similar Messages

How to create select-options in module pool program

Hi
i am structed at this point could you please tell me
how to create select-options in module pool program

Steps to get SELECT-OPTIONS in module pool programs.
<li>. Start one dialog program with SAPZ_TEST.
<li>. Place the below code in the TOP include of the dialog program.
PROGRAM SAPMZ_TEST.
TABLES mara.
SELECTION-SCREEN BEGIN OF SCREEN 2100 AS SUBSCREEN.
SELECT-OPTIONS: matnr FOR mara-matnr.
SELECTION-SCREEN END OF SCREEN 2100.
<li>. Create one screen 2000 .
<li>. Go to Layout of the screen and Define subscreen area on the screen and Name it as g_subscreen.
<li>. Place the below code in the Flow logic of the screen.
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN g_subscreen INCLUDING 'SAPMZ_TEST' '2100'.
PROCESS AFTER INPUT.
CALL SUBSCREEN g_subscreen.
<li>. Activate all.
<li>. Create Transaction code for the dialog program SAPZ_TEST.
<li>. Execute the transaction code. You will see the select-option like we see on Selection-screen.
I hope that it gets u clear idea.
Thanks
Venkat.O

How to creat select-option on module pool screen???

Hi All,
please tell me how to creat select-option on module pool screen???
Regards
Deepak

Hi Deepak Kumar Sharma,
There are Two ways to achieve it...
1) How to create a select-options in a module pool screen.
Method 1
a) Create a subscreen area in your screen layout where you want to create the select options.
b) In the top include of your module pool program declare a selection screen as a subscreen e.g.
SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
select-options s_matnr for mara-matnr.
SELECTION-SCREEN END OF SCREEN.
c) In the PBO and PAI of the main screen where the select options needs to be created do a call subscreen of the above screen (100).
CALL SUBCREEN sub_area INCLUDING <program> <screen>
This call subscreen statement is necessary for transport of values between screen and program.
Note: All validations of the selection screen fields e.g. the s_matnr field created above should be done in selection screen events like AT SELECTION-SCREEN etc and not in PAI. These selection screen validations etc should be done in the top include only.
Method 2
a) Create 2 separate fields in your screen layout - one for the low value and one for the high value. Insert an icon beside the high value which will call the multiple selections popup screen on user command. Use function module COMPLEX_SELECTIONS_DIALOG to achieve this.
struc_tab_and_field-fieldname = con_cust. " 'KUNNR'
struc_tab_and_field-tablename = con_kna1. " 'KNA1'.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
EXPORTING
TITLE = ' '
text = g_titl1 " 'Customers'
tab_and_field = struc_tab_and_field
TABLES
RANGE = rng_kunnr
EXCEPTIONS
NO_RANGE_TAB = 1
CANCELLED = 2
INTERNAL_ERROR = 3
INVALID_FIELDNAME = 4
OTHERS = 5.
IF NOT rng_kunnr[] IS INITIAL.
Read the very first entry of the range table and pass it to
dynpro screen field
READ TABLE rng_kunnr INDEX 1.
IF sy-subrc = 0.
g_cust = rng_kunnr-low.
ENDIF.
You can use the return table rng_kunnr to populate your own internal range table with the values entered by the user. Basically here you are just simulating the work of a select-options parameter by module pool screen elements.
Also have a look on below threads
how to make select option in module pool
select option in module pool program
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7

How to create Context Menu for Full Screen ALV

Dear Experts,
Please tell me the procedure to create Context Menu for ALV Grid (full screen ALV using SLIS ).
Regards
Arnab

Hi,
Check the demo program BCALV_GRID_06

How to create radio button in module pool

Hi All,
Please tell me step by step procedure for creating radio button in module pool.give code for two radiobutton and at a time only one should be selected.
Thanks
Narendra

Hi naren,
In the layout of screen painter click on radiobutton option in the left icons and create in the layout and give name as Radio1 and again select the radiobutton icon and create another and give the name as radio2 and by dragging the cursor select the 2 radiobuttons and goto menubar->edit->grouping->radiobuttons grouping->define.
Double clcik on the 2 radiobuttons and give FCT code for the coding purpose of the 2 radiobuttons.
Cheers!!
VEnk@

How to create Long Text in Module Pool Program

Hi all,
I want to develop a new module pool program and I want to use Long text screen in this program and also want this text will store in table.I never develop such type of module pool before.This long text will like sales order long text.Please let me know the steps how I can develop such type of program and how I save long text huge data in table.
Thanks & Regards
Nirmal

Hai ,
here you have to use custom control, for this
DATA: line(256) TYPE c,
      text_tab LIKE STANDARD TABLE OF line,
      field LIKE line.
1) Create custom control in your screen
2)   CREATE OBJECT: container EXPORTING container_name = 'TEXTEDIT',   "--> (this is custom control name in screen)
                   editor    EXPORTING parent = container.
3) CALL METHOD editor->get_text_as_stream "This method reads data from custom control , inserts into itab 'text_tab'
         IMPORTING
          text = text_tab.                                       "
      READ TABLE text_tab INTO line INDEX 1. read the text into wa 'line'
if you want more clarity , see 'ABAPDOCU' >ABAP USER DIALOGS>    COMPLEXSCREEN ELEMENTS--> DEMO CUSTOM_CONTROL

How to create a ListBox in module pool program in 3.1i system ?

Hi All,
How to create a ListBox of type module pool program in 3.1i system ?
when i tried creating, the listbox option is disabled.
Thanks in advance.
Edited by: gulab zehra on Aug 20, 2009 1:26 PM

Hi,
please go through this...
LIST BOX
      Drop down list box can be created in a dialog screen(SE51) as well as selection screen.
      In screen painter to create a input/output field into list box we use 'L" as a value for dropdown attribute for the i/o field. In screen painter to determine the type of method that will be used to fill the value list we use the attribute value list. If it is blank, the value list will be filled by the first column of the input help assigned to the screen field. This input help can be defined in the ABAP Dictionary, on screen using SELECT,VALUES screen statements or in event POV (PROCESS ON VALUE-REQUEST ) and the input help that will be passed to the field should consists of 2 columns ,the key column is filled automatically by the system. SAP recommends value list field should be blank.
or
The value can be 'A' meaning that the value list will be filled in the event PBO(PROCESS BEFORE OUTPUT) or before the screen is displayed.In this method we use function module VRM_SET_VALUES to fill the values and pass it to the i/o field. If a function code is attached to the list box the selection of a value triggers a PAI otherwise PAI will not trigger. LIST BOX in SELECTION SCREEN
    List Box is created in selection screen using PARAMETERS statement with
AS LISTBOX addition other attributes like VISIBLE LENGTH (width of listbox) can be specified with the declaration. PARAMETERS name AS LISTBOX VISIBLE LENGTH n.
   The function module VRM_SET_VALUES is used to fill the value list associated with a List Box .This FM uses types which are declared in type group VRM. So we should declare TYPE-POOLS VRM before using this FM.
Some important types declared in the VRM type group are
VRM_ID
   It refers to the name of the input/output field associated with list box
VRM_VALUES
It refers to the internal table consisting of two fields TEXT(80C) and KEY(40)C
that will be used to create the list values.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
      ID                  = name of screen element, it is of TYPE VRM_ID
      VALUES      = internal table containing values, of TYPE VRM_VALUES
Thanks
Ashu Singh

How to create dynamic screen using module pool programming

Hi,
Could anybody help me how to create dynamic screens?
I am developing a screen with HR Person with assignment info. If PERNR have multiple assignments, i need to show all the details one by one. How to show the details on screen. I need to call one by one assignment information dynamically.
Please suggest me how to do, apart from using table controls.
Thanks,
Kamal

You may have the below options:
1) Table Control
2) Individual fields
3) ALV
4) pop-up screen

How to create select-options on module pool screen

Hi all
I want get a range of values from the user from the module pool screen.
Is there any element available on module pool screen like select options on the selection screen of reports.
reply me ASAS.
Thanks.

hi krishna
actually I want to display the details of PO numbers from 45000100 to 45000150. user will enter this range on the module pool screen just as we enter on the selection screen of report. My question is do we have a button like select-option on the module pool screen.
Plz . reply me ASAP.
Thanks.

Creating Context menu on TREE control

Hi,
How to create Context menu on Tree (Nodes and Subnodes) in Web Dynpro for ABAP.
Helpful answers will be rewarded.
Regards,
Jitesh.

Hi
You could go to the following link http://help.sap.com/saphelp_nw2004s/helpdata/en/21/ad884118aa1709e10000000a155106/frameset.htm .
Also you could have a closer look at wdr_test_events example
Thanks
Anzy

Creating context menu on TREE

Hi,
How to create Context menu on Tree (Nodes and Subnodes) in Web Dynpro for ABAP.
Helpful answers will be rewarded.
Regards,
Jitesh.

hi jitesh,
check out the sample tutorials in sap under the package : SWDP_DEMO_TUTORIALS
thanks
jaideep
reward points if useful...

How to save a varaints in module pool programming

Hi All,
How to save a varaints in module pool programming.
Thanks in Advance.
GS.

Hi,
Forgot my previous reply.
Just now I checked.
Create transaction[say.,zzz_test1] using SE93 [choose the option Program and screen] for your module pool program.
Then use SHDS transaction to create a variant[say zzz_v1] for the transaction you created above.
Then use SE93 [choose the option Transaction with Variant] to create another transaction zzz_test2 by mentioning the module pool program name and zzz_test1 transaction which you created and zzz_v1 variant which you created.
Then if you run the transaction ZZZ_test2,then you can see the variant values.
I created just now all these and it works.
Hope this is clear.
If not,get back.

How to provide select-option in module pool programming

Hi all,
How to provide select-option in module pool programming.
If any body knows let me immediately.
Thanks
sudheer

Hi Sudheer,
Unfortunately there is no standard way of having a select-option in a module pool program.
What you can try is having two fields and creating a range in your program and populating the range at runtime with respective value and trying to simulate some functionality of the select-option.
Hope it helps.
Thanks, Debasish

How to download and upload a module pool program ?

hi i am a sudent.can anyone suggest me how to download and upload a module pool program?
Moderator message: please search for available information/documentation.
Edited by: Thomas Zloch on May 29, 2011 12:45 PM

Hi,
You cannot just download and upload module pool programs .
There are 2 different ways.
1. Copy all the includes and and create the same in the target system. You can download and upload the the Screen.
But GUI status you have to manually create.
2. If you have completely saved the module-pool program in one Workbench request(including Z tables u have used) in the original system ,just release the workbench request and copy the data file and co file and upload to the target system ( use CG3Y & CG3Z).
If the workbench is a Local Request save it in a Transport of copies and then move.
Regards
Aromal R

How to save Custom control records module pool program ?

Hi guru ,
1. How to save Custom control records module pool program ?
I wrote multiple lines of record in custom control
Who to save that records ?
thanking you.
Regards,
Subash.

Hi Subasha,
Please check the format below since it is based on a working code
**************data declarations
TYPES: BEGIN OF TY_EDITOR,
EDIT(254) TYPE C,
END OF TY_EDITOR.
data: int_line type table of tline with header line.
data: gw_thead like thead.
data: int_table type standard table of ty_editor.
You should create a text for uniquely identifying the text you are saving each time so that it doesn't get overwritten
For this a key combination must be decidedd to uniquely identify the test..here it is loc_nam
****************fill header..from SO10( t-code )
GW_THEAD-TDNAME = loc_nam. " unique key for the text
GW_THEAD-TDID = 'ST'. " Text ID
GW_THEAD-TDSPRAS = SY-LANGU.
GW_THEAD-TDOBJECT = 'ZXXX'. "name of the text object created
*Read Container and get data to int_table
CALL METHOD EDITOR ->GET_TEXT_AS_R3TABLE
IMPORTING
TABLE = int_table
EXCEPTIONS
ERROR_DP = 1
ERROR_CNTL_CALL_METHOD = 2
ERROR_DP_CREATE = 3
POTENTIAL_DATA_LOSS = 4
others = 5.
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop data from int_table and save to int_line-tdline appending it.
*save the text
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
HEADER = GW_THEAD
TABLES
LINES = InT_LINE
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
OBJECT = 4
OTHERS = 5.
IF SY-SUBRC 0.
ENDIF.
The code shown above is ok and working fine for save also,hope that the above sample with helps you solve the problem
Please check and revert,
Reward if helpful
Regards
Byju

How To Create Context Menu In Module Pool

Similar Messages

Maybe you are looking for