How to create CUSTOMER IN SAP
HI,
I AM USING NETWEAVER .I HAVE WRITEN SOME BAPIS LIKE SALES ORDER CREATE,QUOTATION,MATERIAL ....... USING ENTERPRISE CONNECTOR
I AM FACING SOME PROBLEMS WHILE CREATING CUSTOMER IN SAP
PLEASE SEND ME CODE FOR CREATE CUSTOMER
REGARDS
GURU
Hi Guru,
<<f2 862 Double Creation of Company and User Address not permitted
>>
me too tested that BAPI by filling sample values ..
i got the same exception when i try to fill the details in PI_PERSONALDATA and PI_COMPANYDATA..
i could solve this by ...
Actually , ur above mentioned error is because , u have filled the Personal Details in
PI_COMPANYDATA also .. i think we only have to fill these details in one of the import params (PI_PERSONALDATA or PI_COMPANYDATA).
Try with these values
Import Parameters
1) PI_PERSONALDATA
TITLE_P <u can find out this from tsad3t table itself>
FIRSTNAME
LASTNAME
DATE_BIRTH
CITY
DISTRICT
POSTL_COD1 STREET
REGION COUNTRY IN
COUNTRYISO IN
TEL1_NUMBR
LANGU_P EN
LANGUP_ISO EN
CURRENCY INR
CURRENCY_ISO INR
2) PI_COPYREFERENCE
Here u have to fill these fields with proper values..
Sales Organization
Distribution Channel
Division
Reference customer
these values u can find out from the kunnr table itsef..
Regards
Kishor Gopinathan
Similar Messages
-
How Tou2026 Create Custom Application in E-Commerce 7.0?
Hi all,
We want to set up SAP E-Commerce for ERP 7.0. For SAP E-Commerce for ERP 5.0 the following configuration guide is available:
How Tou2026 Create Custom Application in E-Commerce 5.0
What about SAP E-Commerce for ERP 7.0? Is this guideline also valid for 7.0?
If not, where can I find the corresponding configuration guideline for SAP E-Commerce for ERP 7.0 (on the SAP Service Marketplace?)?
Thanks in advance.
Regards,
AVHello Av,
Please see the Development and extension guide @
http://service.sap.com/crm-inst
=> Release 7.0
=> Operate
Regards
Mark -
How to create custom(or) user defined component in SAPTAO
Hi,
Please provide me some document or steps on how to create custom component in sap tao.
Thanks a lot in advance.
Regards,
SudhaHi,
If you want create any custom components, you should use SAP QTP to create it.
Here are the simple steps:
i) Go to QTP -> Click on New - > Select Scripted Component - > ((Select SAP_Doc) area (i.e. whatever application area you have created for SAP TAO installation)) -> Record or Write a script based on your requirement & save
ii) Go to QC -> BPT -> open above component and insert the parameters and call these values in QTP script level (either way you can do)
iii) Create a datasheet and declare the parameters in datasheet and call this sheet whenever you have required.
Good luck.
Ram -
Regarding how to create custom IDOC?
hi experts:
thank you all in advance for all your answers . .
I am studying Idoc, Would you please give me an example about how to create custom IDOC , and the basic idea, what's more , give me some material I can refer to . couldn't thank you more
Best regards
FrankSteps To Create Custom IDOC
1.Create Segment Type (WE31)
Go to Transaction code WE31
Enter Segment type, click on Create
Give Description
Enter the Necessary Fields & Data Elements for those Fields.
Save the Changes.
2.Create Idoc Type (WE30)
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
3.Create Message Type (WE81)
Go to transaction code WE81
Change the details from Display mode to Change modenAfter selection, the system will give this message The table is cross-client (see Help for further info). Press EnternClick New Entries to create new Message Type
Fill details
Save it and go back
4.Assign Idoc Type to Message Type (WE82)
Go to transaction code WE82
Change the details from Display mode to Change moden After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
You will get step by step process.
ABAP Development
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.geocities.com/xplosion78/customised_ALE_IDOC_BY_SACHIN_DABHADE.zip
http://help.sap.com/saphelp_45b/helpdata/en/35/b0ea5187a62488e10000009b38f9b7/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/c4/6bc368fef411d28d0900104b56737d/frameset.htm
ABAP Development
Follow below steps to create custom IDOC.
1.Create segments through transaction WE31.
2.Create IDoc Type through transaction WE30 by attaching created segments.
3.Message type through transaction WE81.
4.Link Idoc and message type in WE82 transaction.
Check the transaction WEDI for ALE settings
Check these links for more details on IDoc's:
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
ALE/ IDOC/ XML
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
http://help.sap.com/saphelp_srm30/helpdata/en/72/0fe1385bed2815e10000000a114084/content.htm
IDOC Convertion
/people/kevin.wilson2/blog/2005/12/07/changing-fields-in-an-idoc-segment
http://www.intelligententerprise.com/channels/applications/feature/archive/kasturi.jhtml
i need a sample code regarding to create a custom IDOC...
Reward points... -
Hi,
how to create custom action for Assemble permission for CMS. we have CMS.transport action which gives permission to Assemble & also to other activities. I want to know if there is a possiblity to just give that assemble permission instead of Cms.Transport.Hi,
Yes if you are going to modify Umerole.xml then only this is possible
<ACTION NAME="Manage_All">
<DESCRIPTION LOCALE="en" VALUE="Overall user administrator permissions, that is, administration of users belonging to any company." />
<PERMISSIONCLASS="com.sap.security.core.admin.permissions.UMAdminPermissions" NAME="MANAGE_ALL_COMPANIES" VALUE="*" />
<PERMISSIONCLASS="com.sap.security.core.admin.permissions.UMAdminPermissions" NAME="USERS_ASSIGN_TO_DIFF_COM" VALUE="*" />
<PERMISSIONCLASS="com.sap.security.core.admin.permissions.UMAdminPermissions" NAME="USER_VIEWPROFILE" VALUE="*" />
<PERMISSIONCLASS="com.sap.security.core.admin.permissions.UMAdminPermissions" NAME="USER_CHANGEPROFILE" VALUE="*" />
<PERMISSIONCLASS="com.sap.security.core.admin.permissions.UMAdminPermissions" NAME="USER_CHANGEPASSWORD" VALUE="*" />
<PERMISSIONCLASS="com.sap.security.core.admin.permissions.UMAdminPermissions" NAME="USER_CREATE" VALUE="*" />
As you in this UMErole.xml file, we have an Action named = Manage_All
Also we have PERMISSIONCLASS, waht you can do is find action you want to modify and for e.g you want USER_CHANGEPASSWORD should not be there for Manage_All action, then just delete the permission class for that action.
Hope this helps,
Regards,
Ameya -
SAPUI5-How to create custom Split Page control
I want to create a custom split -like page control using sap.m library instead of Splitter.This page should contain two areas left and right
content with different width.How to create this type of page as a custom control?
Please help me with this.Hi,
I think There is no need to create Custom Page for the labels.
To create labels in SAPSCRIPT, you will have to define multiple MAIN WINDOWS in the Page Window.. try the following steps..
Main windows in page windows allow you to format text in multiple columns. Define an area in the page window, in which to position the main windows.
1. Create a page window and assign it to a page.
2. Choose Edit --> Main windows.
A dialog box appears.
3. Enter values in the fields Area width and Area height in accordance with the input guidelines for main windows.
4. Enter values in the fields Spacing and Number in the Horizontal group if you want to use multiple columns. You can ignore the fields in the Vertical group.
5. Determine how many columns and line areas are required for label printing. Then enter the corresponding values in the fields in the Horizontal and Vertical groups.
Also Check these links.
how to create labels in sap script?
labels in script
Labels in Scripts
Regards
Shiva Kumar -
How to Create Customer by BAPI or by Function Module
Hi all,
I am new to this forum...
Please can anyone tell me how to Create Customer by BAPI or by Function Module.....?
I have tried many of the function modules posted in the threads.. but it couldn't help me out...> The only official solution is batchinput and idoc (CREMAS).
Note that when an IDoc exists, it is often possible to call the function module that is just behind it (see WE57 transaction). SAP would not support that direct call, but if you need to contact SAP support about an issue, you can create the IDoc manually and there's no reason that this issue doesn't arise.
The only difference with the IDocs is that you don't have any IDoc stored in the database, and even no log in database (so you won't be able to see anything in WE02, etc.).
Note that it is important to know if this function module does a database commit or not: you can look at the BDFG transaction (I assume there's no BAPI related as it is the initial assumption of my post) to see if IDoc packet processing is allowed or not: if packet processing is allowed, there's no database commit in the function module, otherwise there's one. -
How to create customer exit variable
Hi guys,
please any one can help for how to create customer exit variabel.
Regards.Hi!
welcome to SDN.
its very simple.just go to Bex query designer. there u can use the following <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/ac/789b3c4d4d8d15e10000000a114084/content.htm">Link</a> to create a variable.. but use the processing type user exit.
after that go to transaction SE37 in BW and opent he function module EXIT_SAPLRRS0_001
and in that there is a include ZXRSRU01.... just double click on it and edit that...
there u can write code for your variable ,...for example write code inside
case "ZMY_VARIABLE"
*code for ur variable
endcase
u can use the following
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/f1/0a56f5e09411d2acb90000e829fbfe/content.htm">link for help</a> -
How to create customer exit for characteristic variables and for text vars.
hi friends,
can anybody tell me how to create customer exit for characteristic variables and for text variables in bw ides system.
thanks,
sreeHi,
Please have a look at:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f1a7e790-0201-0010-0a8d-f08a4662562d
Krzys -
How to create customer material information(vd51) and what is it's use
how to create customer material information(vd51) and what is it's use.
does it will work even in mm module also??
my requirement is such that...
my sap code is 235
where as customer will give purchaase order on code 536.when i am entering this 536 code in my system,automatically sytem should propse my sap code of 235.subsequently my inventory should reduce.Hi,
the transaction for maintaining the customer material inforecord is VD51.Data on a material defined for one specific customer is stored in the customer material information records.
Features:
During order entry, items can be entered by specifying the material number used by the customer. You also enter a customer material number in the order view of the sales order. You can then use both material numbers during the order entry, the material number your company uses or the one defined by the customer, because the system can carry out allocation automatically.
If you maintain the plant in the customer material info record, the system will give priority for the plant maintained in the CMIR in the order.
Prase -
How to create custom member in excel BPC report?
Hi Everyone,
Hope you are doing good!!
I have bit confusion on custom member and how to create custom member in excel bpc report.
Can you please explain me on this with example.
Thanks,
AmitHi Amit,
Take look at below thread might be helpful for you.
Refer page no 206
https://help.sap.com/businessobject/product_guides/boeo10/en/EPMofc_10_user_en.pdf
and
Best Practices For Reporting Against SAP Business Planning and Consolidation (Powered by SAP HANA), utilizing the EPM Ad…
Hope this will help you -
How to create custom infotype for training and event management
hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzalHi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini -
How to create custom content placeholder in sharepoint 2013
Hi, I would like to create custom content placeholder don't know how to and add to my custom master page in sharepoint 2013. I have no luck searching on how to create custom content placeholder, any help?
Thanks,
JohnwebHi,
If you’re not fixed your requirement with the Out of the box SharePoint place holders, you can create as many as you want as long as the ID doesn’t conflict. On the master page add the content place holder
<asp:ContentPlaceHolderid="CustomName" runat="server"></asp:ContentPlaceHolder> and add this to your page layout
<asp:Contentrunat="server" ContentPlaceHolderID="CustomName"></asp:Content>.
I suggest you provide your basic requirement for further research.
If you want to customize a master page, the Rajendra's method would be helpful.
Best Regards,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
How to create custom adapter for Products and CommerceService
Hi guys!
First of all I wanted to say that I did search. Only relevant material I found was this http://dev.day.com/docs/en/cq/5-5/ecommerce/eCommerce-framework.html
Unfortunately it doesn't go in details enough...
I'm trying to follow geometrixx-outdoors example to create my shoppingCart. I have a list of of products in /etc/commerce/products.... referenced by productPage in content.
But I don't know how to create custom CommerceProvider and Adapter to create proper Product objects - it always picks up geoProductImpl.
As I understand I need to specify cq:commerceProvider to myProvider and then I need to somehow register MyProvider so it gets picked up.
Also I guess I need to add MyProductAdapter somehow so when shoppingCart executes following it returns my implementation instead of geoProductImpl.
Product product = productResource.adaptTo(Product.class);
I'd really appreciate if anyone could share an example or point me in the right direction for a guide.
Cheers
KostyaHi Kostya,
Look at this presentation recorded at http://dev.day.com/ddc/en/gems/commerce-framework.html
Thanks,
Sham -
How to create custom report in crm 2013
Hi,
I want to create custom report in crm 2013. I want to show Contact information in report. My scenario is that when I select multiple record and run report then contact information show in different pages. I want to show record in textbox in report. Here
is an example of display recordHi Aamir,
Have a look at below link it shows step by step how to create custom SSRS report.
http://www.njevity.com/blog/creating-dynamics-crm-2011-reports-sql-reporting-services-pre-filtering-and-default-filters
It tells using fetchxml, you can use SQL query as well. You need to use pre filtering to run report on selected record.
Thanks,
Prasad
Make sure to "Vote as Helpful" and "Mark As Answer",if you get answer of your question.
Maybe you are looking for
-
Best Interface for GarageBand and Logic?
I have been using GB and Logic Pro extensively for the past 2 years. I would now like to know what the best interface would be to use in order to use 8 mics at one time. Thanks for your help.
-
E-Business Linux Post Migration Issues.
Hi All, We have recently finished migration of one of our Release 12.1.1 instance from Solaris to linux 64 bit. We have been facing issues with the binaries not executing and relinking issues. FNDCPASS is not changing the password for oracle users or
-
MAKING UNLIMITED INDICATOR AS GREY MODE IN SERVICE TAB OF SERVICE P.O
Dear cons In service purchase order we want to make unlimited delivery indicator in a grey mode in service tab. I tried in screen layout of purchase order. In purchase order there are two field of unlimited indicator. One is available in delivery tab
-
Acrobat Pro 9.0 Uninstall incomplete - MS Word Acrobat options remain
Hello All, Currently we are using Acrobat Professional 9.0, installed on a Windows XP machine with MS Office SP3. The installation of Acrobat Pro 9.0 works error free. The problem I'm seeing is that the uninstall does not appear to be complete. After
-
When I hook my MacBookPro to HDTV using the moshi MiniDisplayPort to HDMI adaptor, the sound
When I hook my MacBookPro up to TV using the moshi MiniDisplayPort to HDMI adaptor, the video & audio black out every few seconds. Is there a setting I missed? I read something about the refresh rate possibly causing this, but I can't find out how to